Pretty sure linux-libre kernel doesn't have any GPUs. Besides,the FPS out of
nouveau would be terrible, about as good as his HD4000 anyway.
Don't buy sony, ever
https://en.wikipedia.org/wiki/Sony_BMG_CD_copy_protection_scandal
The scanning of the entire memory again and again does. But you will see the
clock info immediately.
I think this is a cultural difference. Perhaps this particular sentence form
(question, yes? question, yes?) is always used sarcastically where you're
from. That's not true here.
New Zealand English is influenced by the indigenous Māori language, of which
I am a basic speaker. In Māori, the
Or maybe get one of these > http://hyperkin.com/Retron5/
"is not very good with English"
I am very good with English, on English, above English and on top of English
but not below coz I don't feel comfortably in that position. LMAO
"he's a decent dude overall"
Yes. Except that time three years ago that I lost a bet to GNUser and I had
to post a p
"Calm down. I'm not out to get you."
I was calmed down and I still am. You had complained about my email address
and then I changed it ironically. This is the third time I've got to explain
this to you.
"conspiracy theories"
I didn't said such a thing. The trisqueltrollsquad is a name for a
Thanks quantum! Checkinstall was just the sort of thing I was looking for.
Tell me something, maese. Do you have a swap partition?
No it doesn't. It depends on the transfer speed of your memory and tour
processor but it is 1:30 to 2:30 hours
Terrible spelling _._._._._._:::
No backup ... but a search in system files for gnome-control-center reveals
only two files changed in the past ten days:
1. Folder: gnome-control-center in /usr/share/doc, which was changed
yesterday. None of the files in it have been changed, however.
2. File: gnome-control-center.list was a
it dose!
Point me to a source though (tried to find one...if admittedly maybe not
hard enough) :)
I heard that it takes ages to run memtest?
hi all
I've created an irc channel for french speaking users (AKA: OIO)
irc.freenode.net#trisquel.fr
have asked some extra French hands for more ops/moderators on the French
Forum
Who is running the #trisquel irc ?
to whom may i get in contact with on concerns of Group registrations
on Freen
Here's what happened: I was trying to setup KVM. So I made manual changes
regarding my network interfaces.
Somehow, KVM worked.
I don't remember why, but I had to restart my machine.
I then noticed that my bridge was finally up. I also noticed a much slower
reboot because of some network confi
https://trac.torproject.org/projects/tor/ticket/11776
I think I restarted my machine because Bitmask started, but wasn't able to
get a connection.
added to the above, it really seems to be a network issue.
lc...@dcc.ufmg.br:
> Were you connected to the Internet? For instance, were you able to visit
> a Web page?
Yes, my internet connection is fine.
>
> APT's logs are in /var/log/apt (probably what you are looking for).
> dpkg's logs directly are in /var/log. The Changelogs of the individual
> pack
Run memtest. it will tell you the memory clock if you're interested.
I don't think you can fix that. The client relies on very specific packages
version and there are a lot of dependencies. I don't think the dependency
hell can be easily solved (if at all). Trust me, I do speak from experience
here.
Install the standalone bundle. Don't forget to verify the ta
Any backup to restore?
Yes i have 30 delay.
Also for now it only boot with one CPU.If i put second cpu did`t boot.
Will try difrent memory configuration to see what will happend.My memory is 4
GB hynix ECC REG DDR2 800.
the best place to ask would be the #libreboot irc channel on freenode
also i found this from the libreboot website:
There seems to be a 30 second bootblock delay (observed by tpearson); the
system otherwise boots and works as expected. See text/kfsn4-dre/bootlog.txt
- this uses the 'simple' b
# The loopback network interface
auto lo
iface lo inet loopback
#
auto eth0
iface eth0inetdhcp (was on manual before)
#
auto br0
iface br0 inetdhcp
bridge_portseth0
#bridge_stp off
#bridge_fd 0
#bridge_maxwait 0
I've made a smal
Update: I then tried to use Software Updater in System Settings. The update
proceeded, apparently successfully with a small update to Trisquel Base (487
kB) but the following warnings appeared on the console, which now opens as
described above whenever I start System Settings from the GUI:
>
While attempting to move desktop icons onto the taskbar, I installed
gconf-editor.
Somehow, after using gconf-editor and then trying to use System Settings, I
ended up in the console with this error:
> (gnome-control-center.real:3319): GLib-GIO-CRITICAL **: g_menu_insert_item:
assertion 'G_
Pics
Hi my asus/kfsn4-dre arrive and i install libbre boot from git.
But usb keyboard not work i`m unable to select from boot menu.
Any quick help ?
I like fluxbox/JWM, which is light enough for my little pink netbook:
http://www.notebookreview.com/notebookreview/asus-eee-pc-2g-surf-user-review/
(512MB of RAM, 800Mhz processor)
but does everything I need it to do.
It might be underkill, but then again it might make your hardware FLY
h
I'm so glad you had a good experience--I have a T61 upgraded to 4 gigs, which
is plenty for my purposes and was an excellent confidence-building experience
for a laptop hardware n00b.
I believe you can take them up to 8 gigs if you know what you're doing but I
don't.
I use my T61 for virt
sweet ! Thanks oysterboy !
Hello everybody,
thanks for your kind advice!
I'm proud to say that i successfully removed 1g of ram from an older notebook
and put it into my thinkpad.
Now I have 2gig and it also shows up in htop.
which frequency they have, i sadly don't know.
Forgot to pay attention when inserting the chip.
how about using vrms and the trisquelize script to remove all the non-free
components from that system? I know we can't isntall trisquel packages into
it, because of the different architecture, but maybe removing the non-free
components would be enough? Ubuntu is the basis for Trisquel after
I guess it depends on what one considers "KISS".
I just don't like to have things installed that aren't necessary. If those
are necessary, I don't see any reason to remove them. I did, however, remove
ssh because I don't use it for example. For me it's a matter of simplicity.
Now, that doesn't
I honestly have no idea. But if you have a file that you want me to test I
will gladly report it back to you :)
Were you connected to the Internet? For instance, were you able to visit a
Web page?
APT's logs are in /var/log/apt (probably what you are looking for). dpkg's
logs directly are in /var/log. The Changelogs of the individual packages are
in the subdirectories of /usr/share/doc.
The dependencies are provided by the PPA you added. However, "you have held
broken packages". You can list those packages from the "Synaptic package
manager" in the "System settings": click on the "Custom filters" button in
the bottom-left part of the interface and then choose "Broken" above.
Nouveau doesn't. At least Kepler and older generations.
Thanks for calling my attention to these files. I am pretty new to really
using and maintaining a Linux distro. My source.list looked OK but may
source.list.d had references to non-trisquel repos. I deleted them. :)
Thanks! This did it!
Intel GPUs capped at 60hz output. Not 60fps. LoL.
Games I playing run more that 60fps. And I uncap some games, it is easy.
The only problem is GPU, I need something more compatible that my gt520.
Example.
Now I playing Open Arena at 144fps, Stunt Rally 2.5 70-90fps.
Very few games will actually run at more than 60 FPS.
Source regarding the Broadwell 60fps cap? (trying to find it, haven't thus
far managed to)
Yeah, it looks like some sort of script assumed you were running Debian and
tried to enable the non-free and contrib repositories.
Anyway, you can go to "Software & Updates" in the system settings to remove
those software sources you want to remove.
So.you're telling me you've got a monitor with a refresh rate of >60/s?
The bad thing, is that: you paying backd00rs when you buy an Intel CPU.
Your sources seem to be a bit messed up. Can you please post the content of
/etc/apt/sources.list and /etc/apt/sources.list.d?
You could work on bringing ARM support for Trisquel,that's one thing that is
currently missing (would bring PC board and Chromebook support to Trisquel)
All PCI-E GPUs need blobs
Excellent and thoughtful response! Many thanks!
Guys, I made a 24x24 SVG file and loaded it into the place in the attached
screenshot for the program "Ardour". It still doesn't appear.
I meant PNG. Typo :)
I actually tired loading a PNG image and it wasn't viewable at 48x48. I guess
I'll try 24x24 to see if it works.
I definitely agree SVG would be better in general.
+1
@elayer12: Also, taskbar is called GNOME Panel in Trisquel.
Hello all, I recently tried to install virtualbox in Trisquel 7 without
knowing it doesn't play nice with it (or the libre movement) so I want to
remove references to it in apt-get update. How to I remove references to
"http://download.virtualbox.org"; from my apt-get-update?
This is what I
Trying
to resolve this, here a more detailed look at the system-log:
..
..
01.11.2015 09:49:49 PC dbus[973] [system] Successfully activated
service
'org.freedesktop.nm_dispatcher'
01.11.2015 09:49:50 PC kernel [ 26.685277] ACPI Warning:
\_SB_.PCI0.PEG0.PEGP._DSM: Ar
I don't think there are commands for changing the panel. I guess you could
manually edit config files, but the easiest way to change the panel is with
the mouse. Right-click on the applicable item and a menu opens up. Hold Alt
while you're right-clicking on something and an alternative menu a
it was maybe a stupid question. I am new to Trisquel and i don't know how the
Taskbar is configured. I thought there is maybe somewhere a configuration
file or directory, where things can be customized via terminal.
Hello,
in order to get kvm with copy/paste from host working i tried to install
the spice-vdagent.
Obviously it fails to work if i choose to use it virt-manager.
I checked the system-logs and found the error-message
* Missing virtio device '/dev/virtio-ports/com.redhat.spice.0': No
such
hello everyone,
In update manager when I try to view the changes of a package it gives
me the message "Failed to download the list of changes. Please check
your Internet connection". I think there is no problem with my
connection. Is this a bug and how can I view the changelog of trisquel
packages
https://en.wikipedia.org/wiki/Intel_AMT
As
soon as i know there are many speculations about a universal backdoor
in the Intel Processor.
I'm not an expert in such things, but If so, then some kind of
Remote-SSH has to be enabled at the bios / cpu, in order to bypass
router firewalls, wich will try to contact a server in the internet f
65 matches
Mail list logo
