Hi Ilya,
On 8/19/2010 2:09 AM, Ilya Yanok wrote:
Some boards need their board-specific PHY quirks to be called
to PHY to work normally. As mpc5xxx_fec driver uses on demand
PHY initialization and can even reinit PHY during normal operation
we can't count on reset_phy() call from
Hi Ben,
On 9/23/2010 6:58 AM, Ben Gardiner wrote:
This patch proposes to migrate the davinci_emac driver to using the
eth_device-write_hwaddr function pointer as suggested by Ben Warren.
All the davinci boards had the behaviour, prior to this patch, of
sync'ing the environment variable
Hi Peter,
On 9/30/2010 9:25 AM, Peter Tyser wrote:
Most people don't use the 'rarpboot' command, so only enable it when
CONFIG_CMD_RARP is defined.
Signed-off-by: Peter Tyserpty...@xes-inc.com
---
common/cmd_net.c |2 ++
include/config_cmd_all.h |1 +
net/Makefile
Hi Thomas,
On 10/5/2010 6:16 PM, Thomas Chou wrote:
Add smc_write_hwaddr() to set mac address.
Clear dev before use.
Signed-off-by: Thomas Choutho...@wytron.com.tw
---
drivers/net/smc9.c | 40
1 files changed, 24 insertions(+), 16
Hi Andreas,
On 10/7/2010 12:44 AM, Andreas Bießmann wrote:
This patch increases timeout for autonegotiation from 1 second to 3 seconds.
Some boards (e.g. at91rm9200ek) did not negotiate within 1 second.
Signed-off-by: Andreas Bießmannandreas.de...@googlemail.com
---
HI Andreas,
On 10/7/2010 12:44 AM, Andreas Bießmann wrote:
Some return values pretended correct pass. This patch changes them according
to README.drivers.net. This patch changes e.g. command 'dhcp' to stop after
errorneous autonegotiation.
Signed-off-by: Andreas
Hi Michal,
On 10/10/2010 6:41 PM, Michal Simek wrote:
Support New emaclite AXI IP.
Signed-off-by: Michal Simekmon...@monstr.eu
CC: Ben Warrenbiggerbadder...@gmail.com
---
drivers/net/xilinx_emaclite.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git
Hi Michal,
On 10/10/2010 6:41 PM, Michal Simek wrote:
Emaclite was using old net api that's why
this patch move emaclite to NET_MULTI api.
Signed-off-by: Michal Simekmon...@monstr.eu
CC: Ben Warrenbiggerbadder...@gmail.com
---
v2: Pass base_addr as parameter
v1: Initial version
---
Wolfgang,
The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-x86
are available in the git repository at:
git://git.denx.de/u-boot-net.git master
Andreas Bießmann (2):
Dear Ben Warren,
Applied to net repo.
OOPS, I already caught them in the AT91 repo and they are on the way to
mainstream already.
Reinhard
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Wolfgang,
please pull the following changes to your tree.
Thanks,
Michal
The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-x86
are available in the git repository at:
On Wednesday 29 September 2010 20:49:05 Peter Tyser wrote:
From: John Schmoller jschmol...@xes-inc.com
When a CFI flash chip could not be detected an error message similar to
the following would be printed on bootup:
FLASH: ## Unknown FLASH on Bank 1 - Size = 0x0100 = 0 MB
The
The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Merge branch 'master' of git://git.denx.de/u-boot-x86 (2010-10-11 10:00:34
+0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-cfi-flash.git master
John Schmoller (1):
cfi_flash: Fix
Call watchdog_reset() upon newline. This is done here in putc
since the environment code uses a single puts() to print the complete
envrironment upon printenv. So we can't put this watchdog call
in puts().
This is needed for boards with a very short watchdog timeout, like the
lwmon5 with a 100ms
Hello
Am a U-Boot newbie and as for now have used u-boot and would like to
explore edit n hack U-boot
Referring to U-boot manual it explains how to use but i wish to know how
u-boot is organised and designed to work
could anyone point to some resource for u-boot hacks?
This patchset adds support for LCD to the MX51 Soc
using the IPUv3 graphic processor. This is a porting
to U-Boot of the Linux driver developed and delivered
by Freescale.
___
U-Boot mailing list
U-Boot@lists.denx.de
The patch adds the linux framebuffer header file. As several
drivers are ported from Linux, it is easier to reuse the same
structures already present in the kernel.
Signed-off-by: Stefano Babic sba...@denx.de
---
include/linux/fb.h | 616
1
The patch adds support for LCD to the vision board.
Signed-off-by: Stefano Babic sba...@denx.de
---
board/ttcontrol/vision2/vision2.c | 69 +
include/configs/vision2.h | 15
2 files changed, 84 insertions(+), 0 deletions(-)
diff --git
Add framebuffer driver for the MX51 processor
working on the IPUv3 internal graphic processor.
Signed-off-by: Stefano Babic sba...@denx.de
---
drivers/video/Makefile |1 +
drivers/video/mxc_ipuv3_fb.c | 661 ++
drivers/video/mxcfb.h|
Dear Stefano Babic,
In message 1286875504-9058-2-git-send-email-sba...@denx.de you wrote:
The patch adds the linux framebuffer header file. As several
drivers are ported from Linux, it is easier to reuse the same
structures already present in the kernel.
Signed-off-by: Stefano Babic
Dear Stefano Babic,
In message 1286875504-9058-3-git-send-email-sba...@denx.de you wrote:
The patch is a porting of the IPU Linux driver
developed by Freescale to have framebuffer
functionalities in u-boot.
Most features are dropped from the original driver and
only LCD support is the goal
Signed-off-by: Wolfgang Denk w...@denx.de
Signed-off-by: Heiko Schocher h...@denx.de
---
arch/arm/cpu/arm1136/start.S| 171 ++-
arch/arm/cpu/arm1136/u-boot.lds |8 ++
include/configs/qong.h |2 +-
3 files changed, 105 insertions(+), 76
Dear Stefano Babic,
In message 1286875504-9058-4-git-send-email-sba...@denx.de you wrote:
Add framebuffer driver for the MX51 processor
working on the IPUv3 internal graphic processor.
Please add reference to original sources.
+/*
+ * Allocates the DRAM memory for the frame buffer.
Dear Stefano Babic,
In message 1286875504-9058-5-git-send-email-sba...@denx.de you wrote:
The patch adds support for LCD to the vision board.
...
+#define CONFIG_PREBOOT
Normally one defines a default command here ?
+#define CONFIG_BMP_16BPP
+#define CMD_DISPLAY
CONFIG_CMD_DISPLAY ???
This patch fixes the reset command on imx25
Signed-off-by: Matthias Weisser weiss...@arcor.de
---
arch/arm/cpu/arm926ejs/mx25/reset.c | 10 ++
arch/arm/include/asm/arch-mx25/imx-regs.h | 10 +-
2 files changed, 7 insertions(+), 13 deletions(-)
diff --git
Wolfgang Denk wrote:
Dear Stefano Babic,
In message 1286875504-9058-3-git-send-email-sba...@denx.de you wrote:
The patch is a porting of the IPU Linux driver
developed by Freescale to have framebuffer
functionalities in u-boot.
Most features are dropped from the original driver and
only
This add relocation of .got entries produced
by -fpic. -fpic produces 2-3% smaller code and
is faster. Unfortunately gcc promotes -fpic to
-fPIC when -mrelocatable is used so one need a very
small patch to gcc too(sent upstream).
Signed-off-by: Joakim Tjernlund joakim.tjernl...@transmode.se
---
Dear Joakim Tjernlund,
In message 1286887081-23172-1-git-send-email-joakim.tjernl...@transmode.se
you wrote:
This add relocation of .got entries produced
by -fpic. -fpic produces 2-3% smaller code and
is faster. Unfortunately gcc promotes -fpic to
-fPIC when -mrelocatable is used so one need
Wolfgang Denk w...@denx.de wrote on 2010/10/12 14:52:18:
Dear Joakim Tjernlund,
In message
1286887081-23172-1-git-send-email-joakim.tjernl...@transmode.se you
wrote:
This add relocation of .got entries produced
by -fpic. -fpic produces 2-3% smaller code and
is faster. Unfortunately
Dear Joakim Tjernlund,
In message
of4dcfbd28.58e81a84-onc12577ba.0047150b-c12577ba.0047d...@transmode.se you
wrote:
What happens when one uses this patch in combination with a standard
(i. e. older, unpatched) GCC?
Nothing, gcc will produce -fPIC relocs and the code will/should just
Board support for the Guntermann Drunck CATCenter Io.
Signed-off-by: Dirk Eibach eib...@gdsys.de
---
MAKEALL |1 +
Makefile |3 +
board/gdsys/io/Makefile | 51 ++
board/gdsys/io/config.mk | 24 +
board/gdsys/io/io.c | 231
Wolfgang Denk w...@denx.de wrote on 2010/10/12 15:47:19:
Dear Joakim Tjernlund,
In message OF4DCFBD28.58E81A84-ONC12577BA.0047150B-C12577BA.
0047d...@transmode.se you wrote:
What happens when one uses this patch in combination with a
standard
(i. e. older, unpatched) GCC?
Wolfgang Denk wrote:
Dear Stefano Babic,
In message 1286875504-9058-4-git-send-email-sba...@denx.de you wrote:
Add framebuffer driver for the MX51 processor
working on the IPUv3 internal graphic processor.
Please add reference to original sources.
Ok
+/*
+ * Allocates the DRAM
Am 12.10.2010 13:37, schrieb Wolfgang Denk:
Dear Stefano Babic,
In message 1286875504-9058-5-git-send-email-sba...@denx.de you wrote:
The patch adds support for LCD to the vision board.
...
+#define CONFIG_PREBOOT
Normally one defines a default command here ?
Probably I misunderstand
Dear Dirk Eibach,
In message 1286890387-11491-1-git-send-email-eib...@gdsys.de you wrote:
Board support for the Guntermann Drunck CATCenter Io.
Signed-off-by: Dirk Eibach eib...@gdsys.de
---
MAKEALL |1 +
Makefile |3 +
board/gdsys/io/Makefile |
Dear stefano babic,
In message 4cb4776d.8050...@denx.de you wrote:
Does it work with both dcache on and dcache off settings?
Well, as there is not yet support for L2-Cache on the MX51, we can say
yes ;-). However, this range of memory is used directly from the IPU
processor and not by the
On 23/09/10 10:32, Nick Thompson wrote:
Fixes build breakage in da830evm after commit
97003756249bd790910417eb66f0039bbf06a02c da8xx: fixup ARM
relocation support
The da8xx fixup commit changed da830/da850 common code to make
relocation work in da850, but didn't add the required defines
to
On Wed, Sep 8, 2010 at 2:11 PM, John Rigby john.ri...@linaro.org wrote:
call fec_set_hwaddr in init routine to setup MAC address
so when ethaddr is set late the change will propagate to the hw
Signed-off-by: John Rigby john.ri...@linaro.org
Ben, can this fix go into the next release?
Dear stefano babic,
In message 4cb479a1.6060...@denx.de you wrote:
Normally one defines a default command here ?
Probably I misunderstand its usage, but my intention is to enable the
PREBOOT feature, but let the user to decide with the preboot variable
if it is required or not. In my case
Hi Dirk,
On Tuesday 12 October 2010 15:33:07 Dirk Eibach wrote:
Board support for the Guntermann Drunck CATCenter Io.
Apart from Wolfgangs comments, some more from myself below.
diff --git a/include/configs/io.h b/include/configs/io.h
new file mode 100644
index 000..53dce7d
---
On Tue, 12 Oct 2010 15:04:31 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
_GLOBAL_OFFSET_TABLE_ is a predefined symbol that the linker defines to
be in the middle of the -fpic GOT table. It marks the end of the GOT table
as far as we are concerned(u-boot does not generate so
Original Message-
From: Marek Vasut [mailto:marek.va...@gmail.com]
Sent: Tuesday, October 05, 2010 1:50 PM
To: StephenPaulraj Chinnadurai-ERS,HCLTech
Cc: u-boot@lists.denx.de
Subject: Re: U-boot hangs at command prompt if unattended for sometime (30
seconds)
Dne Út 5. října 2010
Ignore my previous mail because prefix is not proper.
-Original Message-
From: Marek Vasut [mailto:marek.va...@gmail.com]
Sent: Tuesday, October 05, 2010 1:50 PM
To: StephenPaulraj Chinnadurai-ERS,HCLTech
Cc: u-boot@lists.denx.de
Subject: Re: U-boot hangs at command prompt if
This patch series adds NAND support to the da850evm. The support is in the
spirit of that found in the omap-l1 and u-boot-davinci trees where NAND support
can be enabled with the addition of a single '#define CONFIG_USE_NAND' to the
top of the include/configs/da850evm.h file. Pinmux entries are
There is currently no NAND pinmux enabled by the da850evm board setup code.
This is fine when booting from NAND since the early boot code (UBL) will setup
the pinmux; however, when the boot mode is any other setting NAND is unusable
when enabled in the config.
This patch adds a pinmux list for
The ECC calculations were started by writing 1 13 to the nand FCR register;
that value is also defined as DAVINCI_NANDFCR_4BIT_CALC_START in emif_defs.h.
This patch substitutes the macro DAVINCI_NANDFCR_4BIT_CALC_START for the
magic number '1 13'.
Signed-off-by: Ben Gardiner
The current da850evm config is missing the pieces for NAND support that can be
found in the u-boot-davinci tree [1].
This patch adds NAND support in the spirit of the support in the u-boot-davinci
tree where NAND support for the da850evm can be enabled by putting a single
'#define
The default NAND flash timings are very conservative. This patch assigns the
timings reccomended in the recent linux kernel patch [1] from Sekhar Nori. The
speedup, as reported in that patch, is greater than 5x for reads.
[1] http://www.spinics.net/lists/arm-kernel/msg100278.html
Signed-off-by:
This patch enables also the mtdpart, ubi and ubifs commands when NAND support
is enabled.
Signed-off-by: Ben Gardinerbengardi...@nanometrics.ca
To: Sudhakar Rajashekhara sudhakar@ti.com
Signed-off-by: Ben Gardiner bengardi...@nanometrics.ca
---
include/configs/da850evm.h |8
1
Scott Wood scottw...@freescale.com wrote on 2010/10/12 17:52:58:
On Tue, 12 Oct 2010 15:04:31 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
_GLOBAL_OFFSET_TABLE_ is a predefined symbol that the linker defines
to
be in the middle of the -fpic GOT table. It marks the end of
hi..
i wanted to know where exactly.. the MAC address.. set in uboot
code where can i find those files...how.can.i read MAC adress from
flash..i am using 6280 ubootlader version.please guide me..
thanks regards,
___
U-Boot mailing
On Tue, 12 Oct 2010 16:10:33 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Wolfgang Denk w...@denx.de wrote on 2010/10/12 15:47:19:
Dear Joakim Tjernlund,
In message OF4DCFBD28.58E81A84-ONC12577BA.0047150B-C12577BA.
0047d...@transmode.se you wrote:
What happens
Hello Mike,
I tested this patch series with da850evm plus NAND support; I can
confirm that the #warning is issued as expected; furthermore that when
configured with environment specified by env.oob the board boots and
obtains its environment, as expected , both with '#undef
Dear StephenPaulraj Chinnadurai-ERS,HCLTech,
In message
ec921d4b77c99b4eb3cedaffcf17d5f7420f3e4...@chn-hclt-evs07.hclt.corp.hcl.in
you wrote:
The PXA270 controller is connected to the TPS65021 power management IC. Is
there any possibility the TPS65021 IC will place the PXA270 in sleep mode.
Dear Scott Wood,
In message 20101012105258.37208...@udp111988uds.am.freescale.net you wrote:
Maybe call it _GOT_START_ or similar? _GLOBAL_OFFSET_TABLE_ and
_GOT_TABLE_[1] look like synonyms.
...
[1] Global offset table table? :-)
Yeah. Please display the GOT table on the LCD display ;-)
On Tue, 12 Oct 2010 12:31:25 -0500
Kim Phillips kim.phill...@freescale.com wrote:
that moderate size increase in start.S breaks nand builds:
Configuring for MPC8313ERDB_NAND_66 board...
start.o:(.got2+0x4): undefined reference to `_GOT_TABLE_'
make[1]: ***
Le 12/10/2010 19:11, Joakim Tjernlund a écrit :
Figured I should mention that I have added -msingle-pic-base(from ARM)
which
works nicely with -fpic(not sure if -fPIC is possible) and reduces size
even more:
Since you seem to be following the same path as I did on ARM, I may as
well ask:
Kim Phillips kim.phill...@freescale.com wrote on 2010/10/12 19:31:25:
On Tue, 12 Oct 2010 16:10:33 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Wolfgang Denk w...@denx.de wrote on 2010/10/12 15:47:19:
Dear Joakim Tjernlund,
In message
Dear Heiko Schocher,
In message 1285157193-21717-1-git-send-email...@denx.de you wrote:
Signed-off-by: Heiko Schocher h...@denx.de
---
include/configs/imx27lite-common.h |2 +-
include/configs/km_arm.h |2 +-
include/configs/omap3_beagle.h |2 +-
Dear Ben Gardiner,
In message 1285191169-32552-1-git-send-email-bengardi...@nanometrics.ca you
wrote:
There were some #undef's of CONFIG_SYS_ARM_WITHOUT_RELOC added to a few board
configs as part of the arm relocation series; but these are not needed now as
we
do not #undef what is not
Dear Albert ARIBAUD,
In message 4cb478d4.3030...@free.fr you wrote:
Le 12/10/2010 13:31, Heiko Schocher a écrit :
Signed-off-by: Wolfgang Denkw...@denx.de
Signed-off-by: Heiko Schocherh...@denx.de
---
I assume this is [ELF_RELOC], not [NEW_RELOC], right? I'm asking because
using the
Dear Prafulla Wadaskar,
In message f766e4f80769bd478052fb6533fa745d19a69e2...@sc-vexch4.marvell.com
you wrote:
The following changes since commit d778a2fbb360530395dfbc0dbe1f80b7bf959028=
:
Albert Aribaud (1):
orion5x: fix relocation-incompatible code
are available in the git
Le 12/10/2010 19:11, Joakim Tjernlund a écrit :
Figured I should mention that I have added -msingle-pic-base(from ARM)
which
works nicely with -fpic(not sure if -fPIC is possible) and reduces
size
even more:
Since you seem to be following the same path as I did on ARM, I may as
On Tue, 12 Oct 2010 19:41:56 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips kim.phill...@freescale.com wrote on 2010/10/12 19:31:25:
that moderate size increase in start.S breaks nand builds:
Configuring for MPC8313ERDB_NAND_66 board...
start.o:(.got2+0x4):
On Tue, 12 Oct 2010 13:19:38 -0500
Kim Phillips kim.phill...@freescale.com wrote:
On Tue, 12 Oct 2010 19:41:56 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips kim.phill...@freescale.com wrote on 2010/10/12 19:31:25:
that moderate size increase in start.S breaks
Dear Scott Wood,
In message 20101011203442.ga8...@udp111988uds.am.freescale.net you wrote:
The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-x86
are available in the git repository at:
Dear Sudhakar,
On Wed, Sep 22, 2010 at 12:45 PM, Ben Gardiner
bengardi...@nanometrics.ca wrote:
This patch fixes the LINUX_BOOT_PARAM_ADDR define to be based off of
PHYS_SDRAM_1 instead of CONFIG_SYS_MEMTEST_START. On da830 they are the same
thing but on da850 the CONFIG_SYS_MEMSTART define is
On Tue, 12 Oct 2010 13:25:40 -0500
Scott Wood scottw...@freescale.com wrote:
On Tue, 12 Oct 2010 13:19:38 -0500
Kim Phillips kim.phill...@freescale.com wrote:
On Tue, 12 Oct 2010 19:41:56 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips
Dear Ben Warren,
In message 4cb402a0.7040...@gmail.com you wrote:
Wolfgang,
The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-x86
are available in the git repository at:
Dear Michal Simek,
In message 4cb406ba.6030...@monstr.eu you wrote:
The following changes since commit bfc7bea6adc46e1db2f5a5e3464d7652ed67c864:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-x86
are available in the git repository at:
Dear Stefan Roese,
In message 201010120901.57611...@denx.de you wrote:
git://www.denx.de/git/u-boot-cfi-flash.git master
John Schmoller (1):
cfi_flash: Fix Unknown FLASH error message
drivers/mtd/cfi_flash.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Applied,
Dear Alexander Stein,
In message
1281538084-10062-1-git-send-email-alexander.st...@systec-electronic.com you
wrote:
The include jffs2/jffs2.h is still necessary though.
Signed-off-by: Alexander Stein alexander.st...@systec-electronic.com
---
common/cmd_flash.c | 12 ++--
1
Dear Anatolij Gustschin,
In message 1282123520-25823-1-git-send-email-ag...@denx.de you wrote:
Boards can pass display timing info for drivers using EDID
block. Provide common function to add board specific EDID
data to the device tree. Subsequent patch makes use of this
functionality.
Dear Anatolij Gustschin,
In message 1282059962-9001-1-git-send-email-ag...@denx.de you wrote:
PDM360NG board uses this functionality to pass display
timing info to the Linux Framebuffer driver.
Signed-off-by: Anatolij Gustschin ag...@denx.de
---
v2:
- added howto comment explaining the
Dear Martinez, Aldo,
In message dfef307e035c8647b119e6a60db62d4a01c8177...@dlee02.ent.ti.com you
wrote:
I am not supposed to be adding this patch below
http://www.mail-archive.com/u-boot@lists.denx.de/msg34906.html
I will need an ACK from the responsible custodian.
Who
Scott Wood scottw...@freescale.com wrote on 2010/10/12 20:25:40:
On Tue, 12 Oct 2010 13:19:38 -0500
Kim Phillips kim.phill...@freescale.com wrote:
On Tue, 12 Oct 2010 19:41:56 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips kim.phill...@freescale.com wrote
On 10/12/2010 3:06 PM, Wolfgang Denk wrote:
Dear Anatolij Gustschin,
In message1282123520-25823-1-git-send-email-ag...@denx.de you wrote:
[snip]
Signed-off-by: Anatolij Gustschinag...@denx.de
Acked-by: Detlev Zundeld...@denx.de
Cc: Gerald Van Barenvanba...@cideas.com
---
v2:
-
Dear Minkyu Kang,
In message 4c768b8b.5000...@diagraph.com C Nauman wrote:
This patch adds generic support for the Samsung s3c2440 processor.
Global s3c24x0 changes to struct members converting from upper case
to to lower case.
Signed-off-by: Craig Nauman cnau...@diagraph.com
Cc:
Kim Phillips kim.phill...@freescale.com wrote on 2010/10/12 20:19:38:
On Tue, 12 Oct 2010 19:41:56 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips kim.phill...@freescale.com wrote on 2010/10/12
19:31:25:
that moderate size increase in start.S breaks nand
Dear Stefan Roese,
In message 1283952898-4247-1-git-send-email...@denx.de you wrote:
As usually done in U-Boot, the watchdog_reset code is called via a
macro (WATCHDOG_RESET). In zlib.c this was done differently, by using
a function pointer which is initialized with WATCHDOG_RESET upon
Dear Stefan Roese,
In message 1283952931-4406-1-git-send-email...@denx.de you wrote:
Patch 253cb831 [zlib: add watchdog reset call] added already a few
watchdog reset calls to the new zlib U-Boot port. But on some boards
this is not enough. Additional calls are needed on boards with
short
Yes, it is a simple symbol to add. I will do it twm if you don't
beat me to it. it would be nice if you could try what works
and not though.
Could not wait, does this work for you?
diff --git a/nand_spl/board/freescale/mpc8313erdb/u-boot.lds
On Tue, 12 Oct 2010 21:13:19 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips kim.phill...@freescale.com wrote on 2010/10/12 20:19:38:
On Tue, 12 Oct 2010 19:41:56 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips
Dear Andy,
In message 2a3dcf3da181ad40bde86a3150b27b6b0316062...@dbde02.ent.ti.com
Sukumar Ghorai wrote:
...
I found the problem. It's a eMMC size calculation is wrong and here is the
fix I am sending as a patch too in my next email.
From: Sukumar Ghorai s-gho...@ti.com
Date: Mon, 20 Sep
Dear =?UTF-8?q?Andreas=20Bie=C3=9Fmann?=,
In message 1285363903-71316-1-git-send-email-andreas.de...@googlemail.com you
wrote:
Merge several sizes.h in asm/arch subdirectories into a single
asm/sizes.h file.
Fixup usage of asm/arch/sizes.h in some files to use the merged file.
On Monday, October 11, 2010 17:27:33 Scott Wood wrote:
On Mon, 11 Oct 2010 17:02:00 -0400 Mike Frysinger wrote:
On Monday, October 11, 2010 16:29:41 Scott Wood wrote:
On Sun, Oct 10, 2010 at 06:37:40AM -0400, Mike Frysinger wrote:
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
Dear Lei Wen,
In message 1286685400-27286-1-git-send-email-lei...@marvell.com you wrote:
When use the CONFIG_ENV_IS_NOWHERE, I met such issue:
DRAM: 256 MiB
Using default environment
*** Warning - bad CRC, using default environment
Signed-off-by: Lei Wen lei...@marvell.com
---
V2:
Dear =?ISO-8859-1?Q?Matthias_Wei=DFer?=,
In message 4cb2dde8.6040...@arcor.de you wrote:
Unfortunately this breaks building for this board:
...
I am not sure how to fix this. gd_t contains a member ram_size if
CONFIG_SYS_ARM_WITHOUT_RELOC is not defined. This is the case for our
jadecpu
Add new config options to allow people to control early initialization
of NAND. The current behavior (NAND is initialized early) is unchanged,
but now people may choose to disable this behavior and only initialize
NAND when it would actually be used.
So that we can change the default in the
Add new config options to allow people to control early initialization
of NAND. The current behavior (NAND is initialized early) is unchanged,
but now people may choose to disable this behavior and only initialize
NAND when it would actually be used.
So that we can change the default in the
Dear Kristoffer Ericson,
In message 20101006194103.ge...@boggieman.bredbandsbolaget.se you wrote:
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
This patch add support for the HP Jornada 700-series with flashrom (manufact.
2008).
With little effort it could also be
Dear Mike Frysinger,
In message 201010111517.18063.vap...@gentoo.org you wrote:
On Monday, October 11, 2010 05:45:09 Wolfgang Denk wrote:
board/bf527-ezkit/video.c | 10 +-
include/configs/bf527-ezkit.h |2 +-
these look fine ... were you going to update
-Original Message-
From: Wolfgang Denk [mailto:w...@denx.de]
Sent: Wednesday, October 13, 2010 12:51 AM
To: Andy Fleming; Ghorai, Sukumar
Cc: Lei Wen; Lei Wen; u-boot@lists.denx.de; sshtyl...@mvista.com
Subject: Re: [U-Boot] [PATCH 1/2 V3] mmc: add boundary check for mmc
operation
Dear Daniel Hobi,
In message 1286813015-19085-1-git-send-email-daniel.h...@schmid-telecom.ch
you wrote:
Commit d984fed0 (makefiles: fixes for building build tools)
changed the variable name FIT_CFLAGS to HOSTCFLAGS_NOPED
but forgot to update to corresponding comment.
Signed-off-by: Daniel
Scott Wood scottw...@freescale.com wrote on 2010/10/12 21:20:26:
On Tue, 12 Oct 2010 21:13:19 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Kim Phillips kim.phill...@freescale.com wrote on 2010/10/12
20:19:38:
On Tue, 12 Oct 2010 19:41:56 +0200
Joakim Tjernlund
Dear John Rigby,
In message 1283976684-30754-1-git-send-email-john.ri...@linaro.org you wrote:
call fec_set_hwaddr in init routine to setup MAC address
so when ethaddr is set late the change will propagate to the hw
s/late/later/ ?
Signed-off-by: John Rigby john.ri...@linaro.org
---
On Tue, 12 Oct 2010 21:17:38 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Yes, it is a simple symbol to add. I will do it twm if you don't
beat me to it. it would be nice if you could try what works
and not though.
Could not wait, does this work for you?
diff --git
On Tue, Oct 12, 2010 at 3:35 PM, Mike Frysinger vap...@gentoo.org wrote:
Add new config options to allow people to control early initialization
of NAND. The current behavior (NAND is initialized early) is unchanged,
but now people may choose to disable this behavior and only initialize
NAND
On Tue, 12 Oct 2010 21:51:44 +0200
Joakim Tjernlund joakim.tjernl...@transmode.se wrote:
Scott Wood scottw...@freescale.com wrote on 2010/10/12 21:20:26:
We do need to relocate with NAND SPL. We start in the NAND buffer,
but we have to move to RAM to free up the buffer for loading the rest
Dear Mike,
is there a patch 3/3, too?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
When a woman
1 - 100 of 161 matches
Mail list logo