[U-Boot] Anything missing?

Is there anything missing for this patch to be accepted? Helmut -- Scanned by MailScanner. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Anything missing?

Dear Helmut Raiger, In message <4e5de5a2.70...@hale.at> you wrote: > Is there anything missing for this patch to be accepted? Yes, definitely. for example, you fail to mention which patch you are talking about. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang D

[U-Boot] [PATCH] serial: uartlite: Support for SERIAL_MULTI

Add support for SERIAL MULTI for Microblaze. It can be used by other archs too. Signed-off-by: Michal Simek --- arch/microblaze/lib/board.c |4 + common/serial.c | 14 drivers/serial/serial_xuartlite.c| 138 +- include

[U-Boot] Microblaze changes

Hi, I am sending some Microblaze changes. Thanks for your comments, Michal ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 01/10] microblaze: Fix in/out_be8/16/32 functions

Use inline functions instead of macros because of typechecking. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/io.h | 33 +++-- 1 files changed, 27 insertions(+), 6 deletions(-) diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/as

[U-Boot] [PATCH 02/10] microblaze: Support CTRL+C when tftp is running

Signed-off-by: Michal Simek --- arch/microblaze/lib/board.c |1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index d97543b..5510c12 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -68,6

[U-Boot] [PATCH 03/10] microblaze: Support flashes on lower addresses

Signed-off-by: Michal Simek --- arch/microblaze/lib/board.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 5510c12..ab1cbab 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@

[U-Boot] [PATCH 04/10] microblaze: Add netconsole support

Signed-off-by: Michal Simek --- arch/microblaze/lib/board.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index ab1cbab..e8f4c5b 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@

[U-Boot] [PATCH 06/10] microblaze: Copy bootfile from variables

Setup bootfile. Signed-off-by: Michal Simek --- arch/microblaze/lib/board.c |4 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index e8f4c5b..c00d96b 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/

[U-Boot] [PATCH 05/10] microblaze: Fix unaligned.h for endians

Based on ARM unaligned.h. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unaligned.h | 18 +- 1 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/microblaze/include/asm/unaligned.h b/arch/microblaze/include/asm/unaligned.h index 785c2e9..faf1b02 10

[U-Boot] [PATCH 07/10] microblaze: Remove debug saving value

Forget to remove debug code. Signed-off-by: Michal Simek --- arch/microblaze/cpu/start.S |2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 93a9efd..d3370c4 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/

[U-Boot] [PATCH 08/10] microblaze: Setup MB vectors if feature is enable for u-boot

For example: Setup reset vectors if reset address is setup. Setup user exception vector if user exception is enabled Signed-off-by: Michal Simek --- arch/microblaze/cpu/start.S | 33 + 1 files changed, 21 insertions(+), 12 deletions(-) diff --git a/arch/microbl

[U-Boot] [PATCH 09/10] microblaze: Save and restore first unused vector

Use one memory space to detect little/big endian platforms. The first unused address(0x28) is used instead 0x0 address (reset vectors). Detection rewrited reset vector setup from first stage bootloader. Workflow: 1. Store 0x28 to r7 2. Do little/big endian test 3. Restore r7 to 0x28 Signed-off-by

[U-Boot] [PATCH 10/10] microblaze: Clean up reset asm code

- Remove code copying - Reset address is setup from first stage bootloader - Support reset vector setup on little endian Signed-off-by: Michal Simek --- arch/microblaze/cpu/start.S | 25 + 1 files changed, 5 insertions(+), 20 deletions(-) diff --git a/arch/microblaze/c

Re: [U-Boot] How to reduce manufacturing cost/Better LED PCB&PCBA Choice

Dear Purchasing Manager, Good Day! Do you think your PCB&PCBA cost is too high than other competitors? There might be Achilles' heel on your manufacturing cost. This is Allan of PCB&PCBA Solutions in Taiwan. We Export PCB&PCBA service to many overseas countries every year and help many

Re: [U-Boot] [PATCH] s5p-mmc: Fix ambiguous setting of data transfer width

Hi Chander. this patch is correct. Acked-by: Jaehoon Chung Chander Kashyap wrote: > mmc data transfer width is set as following: > WIDE8[5]: > 0 = Depend on WIDE4 > 1 = 8-bit mode > WIDE4[1]: > 1 = 4-bit mode > 0 = 1-bit mode > > In case of 4-bit mode reset 8-bit mode and > in case of 1-bit

Re: [U-Boot] [PATCH 3/5] da830: add support for NAND boot mode

On 30/08/11 13:15, nagabhushana.netagu...@ti.com wrote: > From: Nagabhushana Netagunte > > Add support for enabling NAND boot mode in configuration file and > add correspanding pinmux support, nand initialize function in board file. > Since the environment variable are stored in first block My en

[U-Boot] [PATCH] bdinfo: Fix bdinfo to show all MACs for Microblaze and ARM

- Show all ethernet MACs in the system. - Show current ethernet device Signed-off-by: Michal Simek --- common/cmd_bdinfo.c | 32 ++-- 1 files changed, 30 insertions(+), 2 deletions(-) diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 6051120..01441de 100

Re: [U-Boot] [PATCH 1/5] da830: disable cache usage due to coherency issues

On 31/08/11 06:40, Netagunte, Nagabhushana wrote: > Mike, > > We will address cache coherency issues soon after these patches. > Earlier also, chache was disabled. Only due to new cache management Framework > which was added recently, it is explicitly needed to be indicated to turn off > cache.

[U-Boot] [PATCH] tools/env: add posibility to inject configuration

If one wants to use fw_printenv/fw_setenv in special variants (eg compiled in MTD parameters without configuration file) he needs to change the sources. This patch add the posibillity to change the behaviour of fw_printenv by defining a specific configuration header at compile time. Signed-off-by:

[U-Boot] Pull request: u-boot-arm/master

Hi Woldfgang, The following changes since commit bd061a5214e60c9d1bb24393933323bd1a2dae19: Merge branch 'master' of git://git.denx.de/u-boot-sh (2011-08-26 15:55:03 +0200) are available in the git repository at: git://git.denx.de/u-boot-arm.git master Anton Staaf (1): mmc: S5P: S

Re: [U-Boot] [STATUS] ARM status as of 2011-08-30

Le 30/08/2011 21:08, Wolfgang Denk a écrit : > Dear Albert ARIBAUD, > > In message<4e5d088b.7090...@aribaud.net> you wrote: >> >> I have just applied Wolfgang's updated ARM board removal patch set. >> >> Currently, u-boot-arm/master builds 182 boards, of which: >> >> - ELDK4.2 finds 37 boards with

[U-Boot] [PATCH] bootp: Fix bug in auto_load function

Patch: "Put common autoload code into auto_load() function" (sha1: 093498669e77597635a24f326f11efeab213d394) is not simple code cleanup but code change which introduce new bug. If autoload variable is not setup it worked as autoload=yes. Currently if autoload is not setup dhcp sends request in fo

[U-Boot] [PATCH] arm: add 64-64 bit divider

This patch adds a 64-64 bit divider that supports ARMv4 and above. Because clz (count leading zero) instruction is added until ARMv5, the divider implements a clz function for ARMv4 targets. The divider was tested with the following test driver code ran by qemu-arm: int main(void) { uint

Re: [U-Boot] [PATCH] Correct call to eth_write_hwaddr()

Kumar Gala wrote: > On Aug 30, 2011, at 10:51 AM, Simon Glass wrote: > >> This fixes "Warning: failed to set MAC address" on platforms which rely on >> an 'ethaddr' environment variable to set the MAC address. >> >> This bug was introduced by this commit: >> >> 7616e785 Add Ethernet hardware MAC a

[U-Boot] [PATCH v10 6/8] nds32: standalone support

Add standalone program related support for nds32 architecture. Signed-off-by: Macpaul Lin --- Changes for v1-v6: - code clean up. Changes for v7-v10: - No change. examples/standalone/nds32.lds | 64 + examples/standalone/stubs.c | 17 +++

[U-Boot] [PATCH v10 7/8] nds32: common bdinfo, bootm, image support

Add support of NDS32 to common commands bdinfo, bootm, and image format. Signed-off-by: Macpaul Lin --- Changes for v1-v6: - Code clean up Changes for v7-v9: - No Change. Changes for v10: - fix up according to the changes in master tree. common/cmd_bdinfo.c | 26

[U-Boot] [PATCH v10 4/8] nds32/ag101: cpu and init funcs of SoC ag101

SoC ag101 is the first chip using NDS32 N1213 cpu core. Add header file of device offset support for SoC ag101. Add main function of SoC ag101 based on NDS32 n1213 core. cpu.c According to the bootstrap procedure in n1213 Core, to turn off watchdog timer is suggested after the cpu is in superus

[U-Boot] [PATCH v10 8/8] adp-ag101: add board adp-ag101 support

Add evaluation board "adp-ag101" configuration file adp-ag101.h. Add adp-ag101.c board config and related settings. Add board adp-ag101 into boards.cfg Signed-off-by: Macpaul Lin --- Changes for v1-v4: - code clean up Changes for v5-v6: - Refine the definitions and parameters about CLK, A

[U-Boot] [PATCH v10 2/8] nds32: add NDS32 support into common header file

Add NDS32 support into common header file. Signed-off-by: Macpaul Lin --- Changes for v1-v7: - No change Changes for v8: - Fix the patch according to dependency of x86's Fix Changes for v9-v10: - No change include/common.h |4 1 files changed, 4 insertions(+), 0 deletions(-) dif

[U-Boot] [PATCH v10 3/8] nds32/core N1213: NDS32 N12 core family N1213

Add N1213 cpu core (N12 Core family) support for NDS32 arch. This patch includes start.S for the initialize procedure of N1213. NDS32 Core N1213 has the following hardware features. Core: - 16-/32-bit mixable instruction format - 32 general-purpose 32-bit registers - 8-stage pipeline - D

[U-Boot] [PATCH v10 1/8] nds32: add header files support for nds32

Add generic header files support for nds32 architecture. Cache, ptregs, data type and other definitions are included. Signed-off-by: Macpaul Lin --- Changes for v1-v4: - Code cleanup and style formatting. Changes for v5-v6: - This patch also updated the following changes against the ch

[U-Boot] [PATCH v10 5/8] nds32/lib: add generic funcs in NDS32 lib

Add Makefile, board.c, interrupts.c and bootm.c functions to nds32 architecture. Signed-off-by: Macpaul Lin --- Changes for v1-v4: - code clean up and formatting style. Changes for v5-v6: - board.c - Do some clean up and add code - Remove display banner which hasn't support. - Add ft

[U-Boot] Microblaze platform patches

Hi, here is the second package with platform changes. The first contained microblaze architecture patches. All my patches with new network drivers/fixes, etc are available in my custodian repo. git://git.denx.de/u-boot-microblaze.git Thanks for your review, Michal _

[U-Boot] [PATCH 1/8] microblaze: Do not select NFS for platforms without ethernet

Undefined network functionality for systems without ethernet and disable NFS support. Signed-off-by: Michal Simek --- include/configs/microblaze-generic.h |2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-

[U-Boot] [PATCH 2/8] microblaze: Remove address offset for uart16550

U-Boot BSP handle 0x3 offset for big endian systems. Little endian Microblaze systems don't use any offset. Signed-off-by: Michal Simek --- include/configs/microblaze-generic.h |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/include/configs/microblaze-generic.h b/inclu

[U-Boot] [PATCH 3/8] microblaze: Fix no return statement from microblaze-generic board

Remove compilation warning for systems without network support. Warning log: microblaze-generic.c: In function 'board_eth_init': microblaze-generic.c:82: warning: no return statement in function returning non-void Signed-off-by: Michal Simek --- .../xilinx/microblaze-generic/microblaze-generic

[U-Boot] [PATCH 4/8] microblaze: Enable FDT/FIT support

Enable FDT and FIT support. Signed-off-by: Michal Simek --- include/configs/microblaze-generic.h |5 + 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 684f2d6..c526006 100644 --- a/include/c

[U-Boot] [PATCH 5/8] microblaze: Wire up LL_TEMAC driver initialization

Initialize ll_temac driver. Signed-off-by: Michal Simek --- .../xilinx/microblaze-generic/microblaze-generic.c | 16 1 files changed, 16 insertions(+), 0 deletions(-) diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microbla

[U-Boot] [PATCH 7/8] microblaze: Wire up axi_ethernet driver initialization

Initialize axi_ethernet driver. Signed-off-by: Michal Simek --- .../xilinx/microblaze-generic/microblaze-generic.c |6 ++ include/configs/microblaze-generic.h |4 2 files changed, 10 insertions(+), 0 deletions(-) diff --git a/board/xilinx/microblaze-generic/microb

[U-Boot] [PATCH 8/8] microblaze: Enable phylib support

Signed-off-by: Michal Simek --- include/configs/microblaze-generic.h | 19 +++ 1 files changed, 19 insertions(+), 0 deletions(-) diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index f56d0e2..d3f0018 100644 --- a/include/configs/microbl

[U-Boot] [PATCH 6/8] microblaze: Enable several ethernet driver compilation

NET_MULTI enables to use several ethernet drivers but microblaze-generic platform config file select only one driver. Signed-off-by: Michal Simek --- include/configs/microblaze-generic.h |9 + 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/include/configs/microblaze-g

[U-Boot] (no subject)

Changes for v2: - Remove extern of timer_init ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v2 1/5] coldfire: Change timer_init return type from void to int

timer_init protorype change for uniformization with other architectures Signed-off-by: Stany MARCEL --- arch/m68k/cpu/mcf547x_8x/slicetimer.c |4 +++- arch/m68k/lib/board.c |2 -- arch/m68k/lib/time.c |8 ++-- 3 files changed, 9 insertions(+), 5 d

[U-Boot] (no subject)

Changes for v2: - Move boards with simple configurations to boards.cfg - Some build corrections ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v2 2/5] coldfire: Clean _config rules and move simple ones to boards.cfg

Signed-off-by: Stany MARCEL --- MAKEALL|6 -- Makefile | 126 ++- boards.cfg | 20 +++ include/configs/M5329EVB.h |8 ++-- 4 files changed, 42 insertions(+), 118 deletions(-) diff --git a

[U-Boot] (no subject)

0003 Changes for v2: - None ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v2 3/5] coldfire: Permit build in a different directory

Add $(obj) before lib$(CPU) to permit build in a different directory Signed-off-by: Stany MARCEL --- arch/m68k/cpu/mcf5227x/Makefile |2 +- arch/m68k/cpu/mcf523x/Makefile|2 +- arch/m68k/cpu/mcf532x/Makefile|2 +- arch/m68k/cpu/mcf5445x/Makefile |2 +- arch/m68k/cpu/m

[U-Boot] (no subject)

Changes for v2: - Missing Corrections of link files for m54451evb board ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v2 4/5] coldfire: Remove link files entries to prevent multiple definitions

Signed-off-by: Stany MARCEL --- board/BuS/EB+MCF-EV123/u-boot.lds|5 - board/astro/mcf5373l/u-boot.lds |4 board/cobra5272/u-boot.lds |5 - board/esd/tasreg/u-boot.lds |4 board/freescale/m5208evbe/u-boot.lds |1 - board/freescale/

[U-Boot] (no subject)

Changes for v2: - Impacted by the v2 of patch 2/5 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v2 5/5] coldfire: Remove board with major build issues

Remove boards with a _config rules errors or with missing linker scripts from MAKEALL or boards.cfg. Permit to run the MAKEALL coldfire to the end. Signed-off-by: Stany MARCEL --- boards.cfg |1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/boards.cfg b/boards.cfg index 9b

Re: [U-Boot] (no subject)

Sorry, Manipulation errors with git send-email. I did not correctly understand the --compose option, and my attempt to use --in-reply-to seams to have also failed. Regards ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listin

Re: [U-Boot] (no subject)

On Wednesday, August 31, 2011 01:32:07 PM Stany MARCEL wrote: > Changes for v2: >- Missing Corrections of link files for m54451evb board Hi, please wrap this into the patch's diffstat. Cheers > ___ > U-Boot mailing list > U-Boot@lists.denx.de > ht

Re: [U-Boot] [PATCH] arm: add 64-64 bit divider

On Wednesday, August 31, 2011 12:38:50 PM Che-Liang Chiou wrote: > This patch adds a 64-64 bit divider that supports ARMv4 and above. > > Because clz (count leading zero) instruction is added until ARMv5, the > divider implements a clz function for ARMv4 targets. > > The divider was tested with t

Re: [U-Boot] Pull request: u-boot-arm/master

On Wednesday, August 31, 2011 12:13:22 PM Albert ARIBAUD wrote: > Hi Woldfgang, > > The following changes since commit > bd061a5214e60c9d1bb24393933323bd1a2dae19: > Hi Albert, I think you forgot to pull u-boot-pxa pull request I sent you? Cheers ___

Re: [U-Boot] [PATCH v2 1/5] coldfire: Change timer_init return type from void to int

Dear Stany MARCEL, In message <1314790136-8362-2-git-send-email-stany.mar...@novasys-ingenierie.com> you wrote: > timer_init protorype change for uniformization with other architectures > > Signed-off-by: Stany MARCEL > --- > arch/m68k/cpu/mcf547x_8x/slicetimer.c |4 +++- > arch/m68k/lib/

Re: [U-Boot] (no subject)

Dear Stany MARCEL, In message <1314790136-8362-1-git-send-email-stany.mar...@novasys-ingenierie.com> you wrote: > Changes for v2: >- Remove extern of timer_init What's this message supposed to be? Please ALWAYS provide a reasonable Subject line. And changelogs for patches must be submitte

Re: [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot

On Tuesday, August 30, 2011 02:05:19 PM Michal Simek wrote: > Add the first axi_ethernet driver for little-endian Microblaze. > > Signed-off-by: Michal Simek > --- > drivers/net/Makefile |1 + > drivers/net/xilinx_axi_emac.c | 622 > + include

[U-Boot] [PATCH v2 2/5] coldfire: Clean _config rules and move simple ones to boards.cfg

From: Stany MARCEL Signed-off-by: Stany MARCEL --- Changes for v2: - Move boards with simple configurations to boards.cfg - Some build corrections MAKEALL|6 -- Makefile | 126 ++- boards.cfg

[U-Boot] [PATCH v2 3/5] coldfire: Permit build in a different directory

From: Stany MARCEL Add $(obj) before lib$(CPU) to permit build in a different directory Signed-off-by: Stany MARCEL --- Changes for v2: - None arch/m68k/cpu/mcf5227x/Makefile |2 +- arch/m68k/cpu/mcf523x/Makefile|2 +- arch/m68k/cpu/mcf532x/Makefile|2 +- arch/m68k/cp

[U-Boot] [PATCH v2 4/5] coldfire: Remove link files entries to prevent multiple definitions

From: Stany MARCEL Signed-off-by: Stany MARCEL --- Changes for v2: - Missing Corrections of link files for m54451evb board board/BuS/EB+MCF-EV123/u-boot.lds|5 - board/astro/mcf5373l/u-boot.lds |4 board/cobra5272/u-boot.lds |5 - board/esd/tasreg

[U-Boot] [PATCH v2 1/5] coldfire: Change timer_init return type from void to int

From: Stany MARCEL timer_init protorype change for uniformization with other architectures Signed-off-by: Stany MARCEL --- Changes for v2: - Remove extern of timer_init arch/m68k/cpu/mcf547x_8x/slicetimer.c |4 +++- arch/m68k/lib/board.c |2 -- arch/m68k/lib/time.c

[U-Boot] [PATCH v2 5/5] coldfire: Remove board with major build issues

Remove boards with a _config rules errors or with missing linker scripts from MAKEALL or boards.cfg. Permit to run the MAKEALL coldfire to the end. Signed-off-by: Stany MARCEL --- Changes for v2: - Impacted by the v2 of patch 2/5 - only EP2500 removed now boards.cfg |1 - 1 files chan

[U-Boot] (no subject)

Date: Mon, 29 Aug 2011 21:04:45 +1000 Subject: [PATCH V3] console: Implement pre-console buffer Allow redirection of console output prior to console initialisation to a temporary buffer. To enable this functionality, the board configuration file must define: - CONFIG_PRE_CONSOLE_BUFFER - Enable

Re: [U-Boot] (no subject)

On 31/08/11 22:35, Graeme Russ wrote: > Date: Mon, 29 Aug 2011 21:04:45 +1000 > Subject: [PATCH V3] console: Implement pre-console buffer > Eep - I do not know what happened to the subject... Let me try again... Regards, Graeme ___ U-Boot mailing lis

[U-Boot] [PATCH] Flush cache after the OS image is loaded into the memory.

From: Diana CRACIUN Since we are loading an executable image into memory we need flush it out of the cache to possible maintain coherence on CPUs with split instruction and data caches. We do this for other executable image loading command. On PowerPC once we do this we no longer need to explic

[U-Boot] [PATCH V4] console: Implement pre-console buffer

Allow redirection of console output prior to console initialisation to a temporary buffer. To enable this functionality, the board configuration file must define: - CONFIG_PRE_CONSOLE_BUFFER - Enable pre-console buffer - CONFIG_PRE_CON_BUF_ADDR - Base address of pre-console buffer - CONFIG_PRE_

Re: [U-Boot] Pull request: u-boot-arm/master -- please hold

On Wednesday, August 31, 2011 02:57:10 PM Albert ARIBAUD wrote: > Le 31/08/2011 13:57, Marek Vasut a écrit : > > On Wednesday, August 31, 2011 12:13:22 PM Albert ARIBAUD wrote: > >> Hi Woldfgang, > >> > >> The following changes since commit > > > >> bd061a5214e60c9d1bb24393933323bd1a2dae19: > > H

Re: [U-Boot] [PATCH v2] add dm9000 eeprom read/write command

On 08/30/2011 11:17 PM, Eric Jarrige wrote: > Hi Stefano, Hi Eric, > Sorry for the confusion, I did not understood that your remark was > not related to the compilation flags. > Now, I've checked how to have this U-Boot commands in the driver > itself. I think it's doable if I can have a compila

Re: [U-Boot] [PATCH v3 1/8] da850: indicate cache usage disable in config file

Nagabhushana, On Mon, Aug 29, 2011 at 6:56 AM, Netagunte, Nagabhushana wrote: > > Gentlemen, > > We will address cache coherency issues soon after these patches. Ok -- that's great news; we greatly anticipate U-boot improvements for da850 from TI. > Earlier also, chache was disabled. Only due t

[U-Boot] [PATCH] powerpc/85xx: Enable CMD_REGINFO on corenet boards

Signed-off-by: Kumar Gala --- include/configs/corenet_ds.h |1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 96810b9..3aa5333 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -5

Re: [U-Boot] [PATCH] arm: add 64-64 bit divider

On Wednesday, August 31, 2011 06:38:50 Che-Liang Chiou wrote: > This patch adds a 64-64 bit divider that supports ARMv4 and above. why ? if you're doing 64 bit divides, chances are you're doing something fundamentally wrong. perhaps you should fix that instead. this is also why we have the do_

Re: [U-Boot] [PATCH] at91rm9200ek.h: explicitly disable D-Cache

On Wednesday, August 31, 2011 01:36:13 Andreas Bießmann wrote: > Commit c2dd0d45540397704de9b13287417d21049d34c6 enabled D-Cache for all > arm devices explicitly. This renders at91_emac driver on at91rm9200ek > unusable. sounds like the at91_emac driver should get a small patch: #ifndef CONFIG_SYS

Re: [U-Boot] [PATCH 1/5] da830: disable cache usage due to coherency issues

On Wednesday, August 31, 2011 01:40:26 Netagunte, Nagabhushana wrote: > We will address cache coherency issues soon after these patches. > Earlier also, chache was disabled. Only due to new cache management > Framework which was added recently, it is explicitly needed to be > indicated to turn off

Re: [U-Boot] [PATCH] tools/env: add posibility to inject configuration

On Wednesday, August 31, 2011 06:06:09 Andreas Bießmann wrote: > --- a/tools/env/Makefile > +++ b/tools/env/Makefile > > +FW_ENV_CONFIG_IN := $(if > $(FW_ENV_CONFIG),$(FW_ENV_CONFIG),fw_env_config.h.in) sorry, but what is the point of this ? why not just do: FW_ENV_CONFIG ?= fw_env_config.h.in

Re: [U-Boot] Common arch-specific header files for SOCs

On Wednesday, August 31, 2011 01:30:56 Simon Glass wrote: > On Tue, Aug 30, 2011 at 9:36 PM, Mike Frysinger wrote: > > On Tuesday, August 30, 2011 17:13:51 Simon Glass wrote: > >> The arch/arm/include/asm/arch symlink needs to point to arch-tegra2 in > >> my case, which is fine, but I also want to

Re: [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot

Marek Vasut wrote: > On Tuesday, August 30, 2011 02:05:19 PM Michal Simek wrote: >> Add the first axi_ethernet driver for little-endian Microblaze. >> >> Signed-off-by: Michal Simek >> --- >> drivers/net/Makefile |1 + >> drivers/net/xilinx_axi_emac.c | 622 >> ++

Re: [U-Boot] [PATCH v10 3/8] nds32/core N1213: NDS32 N12 core family N1213

On Wednesday, August 31, 2011 06:25:55 Macpaul Lin wrote: > --- /dev/null > +++ b/arch/nds32/cpu/n1213/Makefile > > +LIB = $(obj)lib$(CPU).o > + > +$(LIB): $(OBJS) > + $(AR) $(ARFLAGS) $@ $(OBJS) all your makefiles that call $(AR) are broken. they need to use $(call cmd_link_o_target,.

Re: [U-Boot] [PATCH v10 1/8] nds32: add header files support for nds32

On Wednesday, August 31, 2011 06:25:53 Macpaul Lin wrote: > --- /dev/null > +++ b/arch/nds32/include/asm/unaligned.h > @@ -0,0 +1,31 @@ > +/* > + * Copyright (C) 2016 Andes Technology Corporation > + * Copyright (C) 2011 Macpaul Lin (macp...@andestech.com) > + * > + * This file is subject to the te

Re: [U-Boot] [PATCH v10 1/8] nds32: add header files support for nds32

(just picking this e-mail because there is no patch summary to reply to) your nds32 port doesnt update the top level README or doc/README.standalone or add a doc/README.nds32. please add some documentation for your port ;). -mike signature.asc Description: This is a digitally signed message pa

Re: [U-Boot] [PATCH v2 4/5] coldfire: Remove link files entries to prevent multiple definitions

From: u-boot-boun...@lists.denx.de [u-boot-boun...@lists.denx.de] on behalf of y...@theia.denx.de [y...@theia.denx.de] Sent: Wednesday, August 31, 2011 7:11 AM To: u-boot@lists.denx.de Cc: Stany MARCEL; Jin Zhengxiong-R64188; vap...@gento.org Subject: [U-Boot] [PATCH v2 4/5] coldfire: Remove link

Re: [U-Boot] [PATCH v2 4/5] coldfire: Remove link files entries to prevent multiple definitions

On 08/31/2011 04:54 PM, Jin Zhengxiong-R64188 wrote: > From: u-boot-boun...@lists.denx.de [u-boot-boun...@lists.denx.de] on behalf > of y...@theia.denx.de [y...@theia.denx.de] > Sent: Wednesday, August 31, 2011 7:11 AM > To: u-boot@lists.denx.de > Cc: Stany MARCEL; Jin Zhengxiong-R64188; vap...@ge

Re: [U-Boot] [PATCH V4] console: Implement pre-console buffer

On Wednesday, August 31, 2011 08:58:25 Graeme Russ wrote: > Allow redirection of console output prior to console initialisation to a > temporary buffer. looks good to me. doesnt apply, but that's because this needs your other gd rework patch. Acked-by: Mike Frysinger -mike signature.asc Desc

Re: [U-Boot] [PATCH] arm: add 64-64 bit divider

On Wednesday, August 31, 2011 04:32:52 PM Mike Frysinger wrote: > On Wednesday, August 31, 2011 06:38:50 Che-Liang Chiou wrote: > > This patch adds a 64-64 bit divider that supports ARMv4 and above. > > why ? if you're doing 64 bit divides, chances are you're doing something > fundamentally wrong

Re: [U-Boot] [PATCH] net: axi_ethernet: Add driver to u-boot

On Wednesday, August 31, 2011 04:46:22 PM Michal Simek wrote: > Marek Vasut wrote: > > On Tuesday, August 30, 2011 02:05:19 PM Michal Simek wrote: > >> Add the first axi_ethernet driver for little-endian Microblaze. > >> > >> Signed-off-by: Michal Simek > >> --- > >> > >> drivers/net/Makefile

[U-Boot] [PATCH v2] tools/env: add posibility to inject configuration

If one wants to use fw_printenv/fw_setenv in special variants (eg compiled in MTD parameters without configuration file) he needs to change the sources. This patch add the posibillity to change the behaviour of fw_printenv by defining a specific configuration header at compile time. Signed-off-by:

Re: [U-Boot] [PATCH] arm: add 64-64 bit divider

On Wednesday, August 31, 2011 11:11:00 Marek Vasut wrote: > On Wednesday, August 31, 2011 04:32:52 PM Mike Frysinger wrote: > > On Wednesday, August 31, 2011 06:38:50 Che-Liang Chiou wrote: > > > This patch adds a 64-64 bit divider that supports ARMv4 and above. > > > > why ? if you're doing 64 b

Re: [U-Boot] [PATCH] arm: add 64-64 bit divider

On Wednesday, August 31, 2011 05:27:46 PM Mike Frysinger wrote: > On Wednesday, August 31, 2011 11:11:00 Marek Vasut wrote: > > On Wednesday, August 31, 2011 04:32:52 PM Mike Frysinger wrote: > > > On Wednesday, August 31, 2011 06:38:50 Che-Liang Chiou wrote: > > > > This patch adds a 64-64 bit div

[U-Boot] USB on OMAP3

I'm using v2011.06 on the TI OMAP3 platform (internal, similar to BeagleBoard) I'd like my board to support both EHCI and MUSB in host mode. However, when I define both of these, I get compile errors: drivers/usb/musb/libusb_musb.o: In function `usb_lowlevel_stop': /local/DM3730/u-boot/drivers/usb

[U-Boot] [PATCH v5 00/13] Add PXE support

This patch series adds PXE booting support to U-boot. It adds aseries of DHCP options to allow U-boot DHCP requests to be compliant with RFC 4578, and a set of commands to provide PXELINUX like behavior. The pxe commands provide a near subset of the functionality provided by the PXELINUX boot load

[U-Boot] [PATCH v5 01/13] Add generic, reusable menu code

This will be used first by the pxe code, but is intended to be generic and reusable for other jobs in U-boot. Signed-off-by: Jason Hobbs --- changes in v2: - new in v2 changes in v3: - move timeout support to later patch - fix NULL case bug in menu_item_key_match - consistently use 'item_key

[U-Boot] [PATCH v5 02/13] common, menu: use abortboot for menu timeout

Signed-off-by: Jason Hobbs --- changes in v2: - expose abortboot externally instead of using a wrapper - expose abortboot externally when CONFIG_MENU is set changes in v3: - simplify the conditional export of abortboot - add timeout support for the menu in this patch - add doc for timeout feature

[U-Boot] [PATCH v5 03/13] common: add run_command2 for running simple or hush commands

Signed-off-by: Jason Hobbs Cc: Mike Frysinger --- changes in v2: - whitespace correction changes in v4: - fix indention of a run_command2 line - make run_command2 static inline changes in v5: - return parse_string_outer value directly common/hush.c |2 +- common/main.c | 56 ++

[U-Boot] [PATCH v5 04/13] Add isblank

Existing ctype checks are implemented using a 256 byte lookup table, allowing each character to be in any of 8 character classes. Since there are 8 existing character classes without the blank class, I implemented isblank without using the lookup table. Since there are only two blank characters -

[U-Boot] [PATCH v5 05/13] cosmetic: remove unneeded curly braces

This prevents a checkpatch warning in the patch to use isblank Signed-off-by: Jason Hobbs --- new in v4 changes in v5: - none common/main.c |6 ++ 1 files changed, 2 insertions(+), 4 deletions(-) diff --git a/common/main.c b/common/main.c index 3adadfd..d812aa1 100644 --- a/common/mai

[U-Boot] [PATCH v5 07/13] README: document standard image variables

With these documented, we can start pushing towards standardizing their use across boards. Signed-off-by: Jason Hobbs Cc: Mike Frysinger --- new in v4 changes in v5: - moved the doc into README alongside the other environment variables. README | 19 +++ 1 files changed, 19 i

[U-Boot] [PATCH v5 06/13] Replace space and tab checks with isblank

These are various places I found that checked for conditions equivalent to isblank. Signed-off-by: Jason Hobbs --- new in v4 changes in v5: - none board/hymod/env.c|9 + common/command.c |9 + common/main.c

[U-Boot] [PATCH v5 08/13] lib: add uuid_str_to_bin for use with bootp and PXE uuid

Signed-off-by: Jason Hobbs --- changes for v2: - Move uuid_str_to_bin's prototype from uuid. to common.h - Place uuid.o make rule in sorted order and conditionalize changes for v3: - check for NULL pointers in uuid conversion function changes for v4: - add a UUID string validator changes in v5:

[U-Boot] [PATCH v5 10/13] net: bootp: add PXE/RFC 4578 DHCP options support

These options are required to be present in RFC 4578 compliant DHCP requests. They give more information to DHCP servers to allow serving different DHCP responses to different systems based on client architecture, client capabilities, UUID, or vendor. Signed-off-by: Jason Hobbs --- changes for v2

  1   2   >