On 26/04/13 12:08, Naveen Krishna Ch wrote:
> On 14 April 2013 22:48, Heiko Schocher wrote:
>> Hello Naveen Krishna,
>>
>>
>> On 13.04.2013 06:42, Naveen Krishna Ch wrote:
>>>
>>> On 6 April 2013 07:07, Naveen Krishna Chatradhi
>>> wrote:
Add support for hsi2c controller available on e
On 04/29/2013 05:39 AM, Heiko Schocher wrote:
> Hello Michal,
>
> AOn 23.04.2013 12:46, Michal Simek wrote:
>> Support Xilinx Zynq i2c controller.
>>
>> Signed-off-by: Joe Hershberger
>> Signed-off-by: Michal Simek
>> CC: Heiko Schocher
>> ---
>> Changes in v2:
>> - Remove CONFIG_ prefix from n
Hi all
Just replied to remind this patch.
Best Regards,
Jaehoon Chung
On 04/04/2013 03:49 AM, Simon Glass wrote:
> Hi Andy,
>
> On Sat, Mar 16, 2013 at 1:35 PM, Simon Glass wrote:
>
>> Hi Andy,
>>
>> On Tue, Feb 12, 2013 at 7:14 PM, Jaehoon Chung
>> wrote:
>>> Hi Simon,
>>>
>>> It looks good
I'm trying to get u-boot to read from a ubifs volume on an mx28evk
board, and failing :(.
I've got the nand partitioned:
MX28EVK U-Boot > mtdparts
device nand0 , # parts = 3
#: namesizeoffset mask_flags
0: bootloader 0x0030 0x
Hello Michal,
AOn 23.04.2013 12:46, Michal Simek wrote:
> Support Xilinx Zynq i2c controller.
>
> Signed-off-by: Joe Hershberger
> Signed-off-by: Michal Simek
> CC: Heiko Schocher
> ---
> Changes in v2:
> - Remove CONFIG_ prefix from non configurable macros (i2c)
> - Fix checkpatch warnings (i
Hello Su,
On 26.04.2013 10:02, Kuo-Jung Su wrote:
> From: Kuo-Jung Su
>
> Faraday FTI2C010 is a multi-function I2C controller
> which supports both master and slave mode.
> This patch simplily implements the master mode only.
>
> Signed-off-by: Kuo-Jung Su
> CC: Heiko Schocher
> ---
> driver
Currently I am booting from MMC/SD. mx28 SPI2 and MMC/SD are using same
port, can not be used together?
Thanks,
Smith
--
View this message in context:
http://u-boot.10912.n7.nabble.com/mx28evk-spi-boot-tp153575p153600.html
Sent from the U-Boot mailing list archive at Nabble.com.
2013/4/27 Scott Wood :
> On 04/26/2013 03:02:36 AM, Kuo-Jung Su wrote:
>>
>> From: Kuo-Jung Su
>>
>> Faraday FTNANDC021 is a integrated NAND flash controller.
>> It use a build-in command table to abstract the underlying
>> NAND flash control logic.
>>
>> For example:
>>
>> Issuing a command 0x10
2013/4/26 Marek Vasut :
> Dear Kuo-Jung Su,
>
>> From: Kuo-Jung Su
>>
>> The Faraday FOTG210 is an OTG chip which could operate
>> as either an EHCI Host or a USB Device as a time.
>>
>> Signed-off-by: Kuo-Jung Su
>> CC: Marek Vasut
>
> Same rambling as for the other patch, bits should have prop
2013/4/26 Marek Vasut :
> Dear Kuo-Jung Su,
>
>> From: Kuo-Jung Su
>>
>> This patch add supports to both Faraday FUSBH200 and FOTG210,
>> these controllers slightly differ from standard EHCI specification.
>
> How do they differ?
>
1. The reserved registers (0x1C - 0x3F) and CONFIGFLAG (0x40) reg
Dear Marek Vasut,
> The VDDMEM ramped up in very weird way as it was horribly misconfigured.
> Instead of setting up VDDMEM in one swipe, let it rise slowly the same
> way as VDDD and VDDA in spl_power_init.c and then only clear ILIMIT before
> memory gets inited. This makes sure the VDDMEM rises
From: Kuo-Jung Su
With MMU/D-Cache enabled, data might be retained at d-cache
rather than at DRAM when we execute 'go' command, and some
of the bare-metal softwares would always invalidate the entire
data cache at start-up, and then leads to a data lost issue.
Furthermore, the U-Boot not only rel
2013/4/26 Wolfgang Denk :
> Dear Kuo-Jung Su,
>
> In message <1366963312-2901-1-git-send-email-dant...@gmail.com> you wrote:
>> From: Kuo-Jung Su
>>
>> With MMU/D-Cache enabled, data might be retained at cache
>> rather than at DRAM when we execute 'go' command, and some
>> of the bare-metal softw
On Sun, Apr 28, 2013 at 9:18 PM, Marek Vasut wrote:
> The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, otherwise
> they have issues with out-of-tree build where elftosb tool couldn't sometimes
> find the u-boot.bin and spl/u-boot-spl.bin .
>
> Preprocess these .bd files with sed an
The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, otherwise
they have issues with out-of-tree build where elftosb tool couldn't sometimes
find the u-boot.bin and spl/u-boot-spl.bin .
Preprocess these .bd files with sed and insert full path to u-boot.bin and
spl/u-boot-spl.bin to pre
The VDDMEM ramped up in very weird way as it was horribly misconfigured.
Instead of setting up VDDMEM in one swipe, let it rise slowly the same
way as VDDD and VDDA in spl_power_init.c and then only clear ILIMIT before
memory gets inited. This makes sure the VDDMEM rises sanely, not jumps up
and do
On Sun, Apr 28, 2013 at 8:13 PM, Marek Vasut wrote:
> Dear Otavio Salvador,
>
>> On Sun, Apr 28, 2013 at 8:02 PM, Marek Vasut wrote:
>> > Dear Otavio Salvador,
>> >
>> >> On Sun, Apr 28, 2013 at 3:39 PM, Marek Vasut wrote:
>> >> > The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed,
Dear Fabio Estevam,
>
> > From: Fabio Estevam
> >
> > commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR
> > voltage level, which causes mx23evk to fail to load a kernel.
> >
> > Put back the original values, so that mx23evk can boot a kernel again.
> >
> > Signed-off-by: Fabi
Dear Otavio Salvador,
> On Sun, Apr 28, 2013 at 8:02 PM, Marek Vasut wrote:
> > Dear Otavio Salvador,
> >
> >> On Sun, Apr 28, 2013 at 3:39 PM, Marek Vasut wrote:
> >> > The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed,
> >> > otherwise they have issues with out-of-tree build whe
On Sun, Apr 28, 2013 at 8:02 PM, Marek Vasut wrote:
> Dear Otavio Salvador,
>
>> On Sun, Apr 28, 2013 at 3:39 PM, Marek Vasut wrote:
>> > The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed,
>> > otherwise they have issues with out-of-tree build where elftosb tool
>> > couldn't someti
Dear Fabio Estevam,
> From: Fabio Estevam
>
> commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR voltage
> level, which causes mx23evk to fail to load a kernel.
>
> Put back the original values, so that mx23evk can boot a kernel again.
>
> Signed-off-by: Fabio Estevam
So, he
Dear Otavio Salvador,
> On Sun, Apr 28, 2013 at 3:39 PM, Marek Vasut wrote:
> > The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed,
> > otherwise they have issues with out-of-tree build where elftosb tool
> > couldn't sometimes find the u-boot.bin and spl/u-boot-spl.bin .
> >
> > Pr
If the environment contains an entry like "=value" "\0" we should throw
an error when parsing the environment. Otherwise, U-Boot will enter in
an infinite loop.
Signed-off-by: Lucian Cojocar
---
Changes for v2:
- Throw an error instead of silently skip the empty key
lib/hashtable.c |6 +
On Sun, Apr 28, 2013 at 3:39 PM, Marek Vasut wrote:
> The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, otherwise
> they have issues with out-of-tree build where elftosb tool couldn't sometimes
> find the u-boot.bin and spl/u-boot-spl.bin .
>
> Preprocess these .bd files with sed an
Enable LCD output support on M28EVK.
Signed-off-by: Marek Vasut
Cc: Anatolij Gustschin
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
include/configs/m28evk.h | 19 +++
1 file changed, 19 insertions(+)
diff --git a/include/configs/m28evk.h b/include/configs/m2
Add basic LCD driver for i.MX233 and i.MX28. This driver allows framebuffer
console and framebuffer logo.
Signed-off-by: Marek Vasut
Cc: Anatolij Gustschin
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
drivers/video/Makefile |1 +
drivers/video/cfb_console.c |4 +
Extend the regs-lcdif.h with registers for i.MX233.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
arch/arm/include/asm/arch-mxs/regs-lcdif.h | 36 +---
1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/arch/arm/in
This function turns on the LCDIF clock and configures it's frequency. The
dividers settings are calculated within the function and the current
implementation should be fast and accurate.
Signed-off-by: Marek Vasut
Cc: Fabio Estevam
Cc: Otavio Salvador
Cc: Stefano Babic
---
arch/arm/cpu/arm926
Dear Andrew Gabbasov,
> Packed structure cfi_qry contains unaligned 16- and 32-bits members,
> accessing which causes problems when cfi_flash driver is compiled with
> -munaligned-access option: flash initialization hangs, probably
> due to data error.
>
> Since fixing the code to use some other
Dear tiger...@viatech.com.cn,
> Hi, experts:
> How to make doc/DocBook?
> I tried to execute "make htmldocs", it tips:
> "u-boot/doc/DocBook/fs.xml not found"
Bad, bad Simon broke it :b Easiest fix is to edit doc/DocBook/Makefile and
remove fs.xml from DOCBOOKS= .
Simon, can you commit the miss
The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, otherwise
they have issues with out-of-tree build where elftosb tool couldn't sometimes
find the u-boot.bin and spl/u-boot-spl.bin .
Preprocess these .bd files with sed and insert full path to u-boot.bin and
spl/u-boot-spl.bin to pre
I populated N25M256A spi norflash chip into freescale mx28evk board.
include/configs/mx28evk.h
/* SPI Flash */
#define CONFIG_SPI_FLASH
#define CONFIG_SF_DEFAULT_BUS 2
#define CONFIG_SF_DEFAULT_CS0
/* this may vary and depends on the installed chip */
#define CONFIG_SPI_FLASH_STMICRO
#define
Hi,
On Fri, 19 Apr 2013 21:29:33 +0530
Bhargav A K wrote:
> Hi All,
>
> I have enabled the following configurations.
> in my board's config header
>
> #define CONFIG_VGA_AS_SINGLE_DEVICE
> #define CONFIG_VIDEO
> #define CONFIG_CFB_CONSOLE
>
> video_hw_init() returns a pointer to GraphicsDevic
>
> On 12/04/2013 08:53, Alison Wang wrote:
> > This patch adds eSDHC driver support for vybrid platform.
> >
> > Signed-off-by: TsiChung Liew
> > Signed-off-by: Jason Jin
> > Signed-off-by: Alison Wang
> > ---
> > drivers/mmc/fsl_esdhc.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deleti
> On 12/04/2013 08:53, Alison Wang wrote:
> > This patch adds uart driver support for vybrid platform.
> >
> > Signed-off-by: TsiChung Liew
> > Signed-off-by: Jason Jin
> > Signed-off-by: Alison Wang
> > ---
>
> Hi Alison
>
> > diff --git a/drivers/serial/serial_vybrid.c
> > b/drivers/serial/
On 28/04/2013 12:36, Wang Huan-B18965 wrote:
>>
>> I would like to understand there common code should be put. As you
>> can see, for i.MX there is a imx_common directory that is valid
>> across ARM-Core.
> [Alison Wang] I'm trying to align the soc with i.mx platform and will
> use i.MX's imx_com
> On 12/04/2013 08:53, Alison Wang wrote:
> > This patch adds Freescale vybrid vf600 tower board support.
> >
> > Signed-off-by: TsiChung Liew
> > Signed-off-by: Jason Jin
> > Signed-off-by: Alison Wang
> > ---
>
> Hi Alison.
>
> > board/freescale/vybrid/Makefile| 40 +++
> > board/f
Packed structure cfi_qry contains unaligned 16- and 32-bits members,
accessing which causes problems when cfi_flash driver is compiled with
-munaligned-access option: flash initialization hangs, probably
due to data error.
Since fixing the code to use some other way of accessing those fields
seems
> On 12/04/2013 08:53, Alison Wang wrote:
> > This series contains the support for vybrid CPU and vf600 tower board.
> >
> > The Vybrid devices are a family of Freescale's latest Dual Single Core
> > offering with ARM Cortex A5 and CM4 based processors for Advanced
> > Connected Radio, Entry Infot
On 26/04/2013 13:34, Benoît Thébaudeau wrote:
> PUE requires PKE to mean something, as do pull values with PUE, so do not
> compell users to explicitly use PKE and PUE everywhere. This is also what is
> done on Linux and what has already been done for i.MX51.
>
> By the way, remove some unused pad
On 26/04/2013 13:34, Benoît Thébaudeau wrote:
> This macro will be useful for future changes.
>
> Signed-off-by: Benoît Thébaudeau
> ---
> arch/arm/include/asm/imx-common/iomux-v3.h |3 +++
> 1 file changed, 3 insertions(+)
>
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
On 26/04/2013 13:34, Benoît Thébaudeau wrote:
> Keep pad control definitions together, and organize definitions in a more
> legible way.
>
> Signed-off-by: Benoît Thébaudeau
> ---
> arch/arm/include/asm/imx-common/iomux-v3.h | 33
>
> 1 file changed, 19 insertions
On 26/04/2013 13:34, Benoît Thébaudeau wrote:
> Commit dc88403 "iomux-v3: Place pad control definitions into common file"
> broke
> mx51_efikamx because it made i.MX6's pad control definitions conflict with
> i.MX51's.
>
> i.MX51's pad control definitions are actually common to some other i.MX
>
On 25/04/2013 22:16, Marek Vasut wrote:
> Implement BOOT_OFFSET command for imximage. This command is parallel
> to current BOOT_FROM command, but allows more flexibility in configuring
> arbitrary image header offset. Also add an imximage.cfg with default
> offset values into arm/arch/imx-common/
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 1
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 16
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> Add an mxc_ocotp driver for i.MX6.
>
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH,
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> Make all mpc512x code point to the new common fsl_iim driver, and remove the
> former mpc512x-specific iim driver.
>
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
==
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> This allows to test the iim driver in the mainline tree.
>
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> Add a fsl_iim driver common to i.MX and MPC.
>
> Signed-off-by: Benoît Thébaudeau
> ---
> Changes in v4:
> - Remove the bit interface.
> - Fix the checkpatch warning about the usage of volatile.
> - Remove useless quotes in #error.
> - Unsplit l
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 1
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> This can be useful for fuse-like hardware, OTP SoC options, etc.
>
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=
DENX S
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> Define the UID (SoC unique ID) fuses, and the fuses available for the user.
>
> Signed-off-by: Benoît Thébaudeau
> ---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
===
On 23/04/2013 22:17, Benoît Thébaudeau wrote:
> IIM:
> - Homogenize prg_p naming (the reference manuals are not always
> self-consistent
>for that).
> - Add missing SCSx and bank registers.
> - Fix the number of banks on i.MX53.
>
> OCOTP:
> - Rename iim to ocotp in order to avoid confusi
On 26/04/2013 18:01, Fabio Estevam wrote:
> From: Fabio Estevam
>
> commit 5c2f444c9 (mxs: Reset the EMI block on mx23) changed the DDR voltage
> level, which causes mx23evk to fail to load a kernel.
>
> Put back the original values, so that mx23evk can boot a kernel again.
>
> Signed-off-by:
Dear Lucian Cojocar,
In message <517c5a5a.2010...@gmail.com> you wrote:
>
> I had an error (typo) in my predefined environment. Basically I had this:
>
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "key" "\0" "=value" "\0"
>
> It would be nice if U-Boot told me that there was something wrong wit
From: "Haijun.Zhang"
Add platform support for p1020rdb-pd
Signed-off-by: Jerry Huang
Signed-off-by: Haijun Zhang
CC: Sun Yusong-R58495
CC: u-boot@lists.denx.de
---
board/freescale/p1_p2_rdb_pc/ddr.c | 2 +-
boards.cfg | 4
include/configs/p1_p2_rdb_pc.h | 1
57 matches
Mail list logo
