On Sat, 11 May 2013 22:13:51 +0200, Albert ARIBAUD
albert.u.b...@aribaud.net wrote:
Hence, if an SPL script sort-of-hardcodes image start and end (or
relocation symbols as some do), then I prefer to leave it alone for now
and handle in the linker script factoring series later.
... but I do
Dear Bo Shen,
On 12.03.2013 07:15, Bo Shen wrote:
Add OHCI support for sama5d3x devices
can you please rebase this patch and send again?
Signed-off-by: Bo Shen voice.s...@atmel.com
---
change in v2:
- change #if defined to #ifdef for sama5d3
---
drivers/usb/host/ohci-at91.c | 14
Dear Bo Shen,
On 12.03.2013 07:15, Bo Shen wrote:
Add WDRBT bit support for sama5d3x devices
Signed-off-by: Bo Shen voice.s...@atmel.com
---
Change in v2:
no change
---
drivers/spi/atmel_spi.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
Dear Bo Shen,
On 12.03.2013 07:15, Bo Shen wrote:
Add macb support for sama5d3x devices
Signed-off-by: Bo Shen voice.s...@atmel.com
---
change in v2:
No change
---
drivers/net/macb.c |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/macb.c
Dear Bo Shen,
On 12.03.2013 07:15, Bo Shen wrote:
Add sama5d3xek support with following feature
- boot from NAND flash, PMECC support, 4bit ECC @ 512 bytes sector
- boot from SPI flash support
- boot from SD card support
- LCD support
- EMAC support
- USB support (OHCI)
no
Dear Bo Shen,
On 24.04.2013 04:46, Bo Shen wrote:
add network support with ksz8851_16mll on at91sam9n12ek board
Signed-off-by: Bo Shen voice.s...@atmel.com
Acked-by: Andreas Bießmann andreas.de...@googlemail.com
---
Change in v2
No change
---
board/atmel/at91sam9n12ek/at91sam9n12ek.c
On 2013-05-09 22:43, Wolfgang Denk wrote:
Dear Adnan Ali,
In message 518bb8c7.3090...@codethink.co.uk you wrote:
- Why do we have to calculate the crc32c_table[] at runtime? Our
regular CRC code uses a pre-calculated table; we should do the
same
here.
This is part of the
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
From: Bo Shen voice.s...@atmel.com
Using IP version to check whether it has wdrbt bit in mode register
Tested in at91sam9x5ek and at91sam9n12ek.
Signed-off-by: Bo Shen voice.s...@atmel.com
[fix warning about incompatible parameter]
Signed-off-by:
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
Since at91sam9n12 is a subset of at91sam9x5, so put all at91sam9n12
definitions in at91sam9x5 head file.
Signed-off-by: Josh Wu josh...@atmel.com
---
arch/arm/include/asm/arch-at91/at91sam9_matrix.h |2 +-
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
Add support for following features:
- nand boot, with PMECC 2bit ECC for 512 bytes sector
- SPI flash boot
- SD card boot
- LCD support
Signed-off-by: Josh Wu josh...@atmel.com
[fix -Wimplicit-function-declaration for at91_lcd_hw_init()]
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
From: Bo Shen voice.s...@atmel.com
Using IP version to check whether it has wdrbt bit in mode register
Tested in at91sam9x5ek and at91sam9n12ek.
Signed-off-by: Bo Shen voice.s...@atmel.com
[fix warning about incompatible parameter]
Signed-off-by:
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
Since at91sam9n12 is a subset of at91sam9x5, so put all at91sam9n12
definitions in at91sam9x5 head file.
Signed-off-by: Josh Wu josh...@atmel.com
---
arch/arm/include/asm/arch-at91/at91sam9_matrix.h |2 +-
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
Add support for following features:
- nand boot, with PMECC 2bit ECC for 512 bytes sector
- SPI flash boot
- SD card boot
- LCD support
Signed-off-by: Josh Wu josh...@atmel.com
[fix -Wimplicit-function-declaration for at91_lcd_hw_init()]
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
Signed-off-by: Josh Wu josh...@atmel.com
---
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |4
board/atmel/at91sam9260ek/at91sam9260ek.c | 10 ++
include/configs/at91sam9260ek.h | 16
Dear Bo Shen,
Bo Shen voice.s...@atmel.com writes:
Using IP version for different setting
- Higher version supports 8bit mode
- Higher version bus width setting is different
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/mmc/gen_atmel_mci.c | 42
Dear Bo Shen,
Bo Shen voice.s...@atmel.com writes:
add mmc card support with atmel mci driver
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/mmc/gen_atmel_mci.c |5 -
1 file changed, 4 insertions(+), 1 deletion(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas
Dear Andreas Bießmann,
Andreas Bießmann andreas.de...@googlemail.com writes:
Signed-off-by: Andreas Bießmann andreas.de...@googlemail.com
Acked-by: Bo Shen voice.s...@atmel.com
---
Changes in v2:
* use only one ifdef for sam9G variants
board/atmel/at91sam9260ek/at91sam9260ek.c | 12
Dear Albert Aribaud,
please pull the following changes from u-boot-atmel/master into
u-boot-arm/master.
The following changes since commit cac423a730d3506154744485af1bbc1cd3a1e6a8:
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' (2013-05-11 22:24:28
+0200)
are available in the git
Dear Josh Wu,
Josh Wu josh...@atmel.com writes:
Signed-off-by: Josh Wu josh...@atmel.com
---
boards.cfg |1 +
include/configs/at91sam9260ek.h | 18 +-
2 files changed, 18 insertions(+), 1 deletion(-)
applied to u-boot-atmel/master, thanks!
Best
Dear Adnan Ali,
In message 81c88340404a46b9a36590eded5e3...@codethink.co.uk you wrote:
- Compare the code for crc32c_cal() in the patch with the
definition
of DO_CRC(x) in lib/crc32.c - to me, it appears to be the
same for
little endian code (it is redundant?), but different
Tom == Tom Rini tr...@ti.com writes:
Tom We always set a CONFIG_ENV_IS_...somewhere... so drop the initial define
Tom of NOWHERE.
Tom Signed-off-by: Tom Rini tr...@ti.com
Reviewed-by: Peter Korsgaard jac...@sunsite.dk
--
Bye, Peter Korsgaard
___
Tom == Tom Rini tr...@ti.com writes:
Tom Due to hardware design, we can't have NAND present (as we know of NAND
Tom today) when booting from SPI, so disable NAND then as that simplifies
Tom logic.
Sorry, this description is not clear to me. I didn't check in detail,
but as far as I remember
Tom == Tom Rini tr...@ti.com writes:
Tom Signed-off-by: Tom Rini tr...@ti.com
Tom ---
Tom include/configs/am335x_evm.h |7 +++
Tom 1 file changed, 7 insertions(+)
Tom diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
Tom index 945ec09..004a06a 100644
Tom
Tom == Tom Rini tr...@ti.com writes:
Space missing after ':' in subject.
Tom From: Steve Kipisz s-kipi...@ti.com
Tom This patch adds support for the NOR module that attaches
Tom to the memory cape for a Beaglebone board. This does not
Tom add booting support; only support so that you can
Tom == Tom Rini tr...@ti.com writes:
Tom From: Steve Kipisz s-kipi...@ti.com
Tom NOR requires that s_init be within the first 4KiB of the image so that
Tom we can perform the rest of the required pinmuxing to talk with the rest
Tom of NOR that we are found on. When NOR_BOOT is set we save
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 05/12/2013 05:34 PM, Peter Korsgaard wrote:
Tom == Tom Rini tr...@ti.com writes:
Tom From: Steve Kipisz s-kipi...@ti.com Tom NOR requires that
s_init be within the first 4KiB of the image so that Tom we can
perform the rest of the required
Tom == Tom Rini tr...@ti.com writes:
Why not use SPL when booting from NOR as well? You still want to
relocate into DDR.
Tom Frankly, I'm allergic to SPL for NOR. It's the historical and well
Tom understood case, we're r/o until we move from flash to DDR. And it is
Tom fast enough
Fix typo in wandboard README file.
Signed-off-by: Luka Perkov l...@openwrt.org
---
board/wandboard/README | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/wandboard/README b/board/wandboard/README
index e0b0b33..ce83bbe 100644
--- a/board/wandboard/README
+++
2013/5/10 Marek Vasut ma...@denx.de:
Dear Kuo-Jung Su,
From: Kuo-Jung Su dant...@faraday-tech.com
There is at least one non-EHCI compliant controller (i.e. Faraday EHCI)
known to implement a non-standard TDI stuff.
Futhermore, it not only leave reserved and CONFIGFLAG registers
2013/5/10 Marek Vasut ma...@denx.de:
Dear Kuo-Jung Su,
From: Kuo-Jung Su dant...@faraday-tech.com
This patch makes the minimum power-on delay for USB HUB
become configurable. The original design waits at least
100 msec here, but some EHCI controlers(e.g. Faraday EHCI)
are known to require
From: Kuo-Jung Su dant...@faraday-tech.com
This patch adds support to both Faraday FUSBH200 and FOTG210,
the differences between Faraday EHCI and standard EHCI are
listed bellow:
1. The PORTSC starts at 0x30 instead of 0x44.
2. The CONFIGFLAG(0x40) is not only un-implemented, and
also has its
From: Kuo-Jung Su dant...@faraday-tech.com
This patch makes the minimum power-on delay for USB HUB
become configurable. The original design waits at least
100 msec here, but some EHCI controlers(e.g. Faraday EHCI)
are known to require much longer delay interval.
Signed-off-by: Kuo-Jung Su
From: Kuo-Jung Su dant...@faraday-tech.com
There is at least one non-EHCI compliant controller (i.e. Faraday EHCI)
known to implement a non-standard TDI stuff.
Futhermore, it not only leave reserved and CONFIGFLAG registers
un-implemented but also has their address spaces removed.
And thus, we
From: Kuo-Jung Su dant...@faraday-tech.com
This patch adds support to both Faraday FUSBH200 and FOTG210,
the differences between Faraday EHCI and standard EHCI are
listed bellow:
1. The PORTSC starts at 0x30 instead of 0x44.
2. The CONFIGFLAG(0x40) is not only un-implemented, and
also has its
From: Kuo-Jung Su dant...@faraday-tech.com
The Faraday FOTG210 is an OTG chip which could operate
as either an EHCI Host or a USB Device at a time.
Signed-off-by: Kuo-Jung Su dant...@faraday-tech.com
CC: Marek Vasut ma...@denx.de
---
Changes for v6:
- Nothing updates
Changes for v5:
-
Kbuild in U-Boot has been talked about for a while and I know of at least
one functioning attempt and mentions of independent progress. But I don't
see any patches on the mailing list and various people have suggested that
nothing is far advanced yet, so I decided to take a look.
For this effort,
Instead of explicitly speciying the directory for start.o, use any. There
should be only one.
Signed-off-by: Simon Glass s...@chromium.org
---
arch/arm/cpu/u-boot.lds | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index
This is an intial stab at changing Kconfig for U-Boot. So far it is missing
many things, notably SPL support and binary output. Also the output file is
vmlinux instead of u-boot.
Linux modules are not supported, but it is quite possible that some
enterprising soul will want to implement modules
Some Makefiles doen't define COBJS, but just use COBJS-y directly. This
messes with our Kconfig script which uses COBJS to decide which objects
are needed.
Also, for directories where COBJS produces an empty list, COBJS- must be
defined and non-empty, otherwise Kconfig will not create the empty
We need a few of these just to get things started.
Signed-off-by: Simon Glass s...@chromium.org
---
Kconfig | 11 +++
arch/Kconfig | 0
arch/arm/Kconfig | 0
arch/sandbox/Kconfig | 8
arch/x86/Kconfig | 0
5 files changed, 19 insertions(+)
To use this, do
make -f Makefile.kbuild
when building U-Boot, instead of just
make
Signed-off-by: Simon Glass s...@chromium.org
---
.gitignore| 6 ++
config.mk | 5 +
init/Makefile | 21 +
init/main.c | 0
rules.mk | 25
Hi, Marek Vasut
Hello Masahiro-san,
Dear Andrew Gabbasov,
This way of starting emails seems to be dangerously widely adopted ;-D
Thank you for your respond, but I could not understand what you mean.
Do you mean that starting emails with Dear is something strange?
Starting with Hi or
On Mon, May 6, 2013 at 1:03 PM, Simon Glass s...@chromium.org wrote:
On Mon, May 6, 2013 at 8:14 AM, Tom Rini tr...@ti.com wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 05/06/2013 10:11 AM, Michal Simek wrote:
Patman requires python 2.7.4 to run but it doesn't need to be
placed in
On Mon, May 6, 2013 at 8:33 AM, Simon Glass s...@chromium.org wrote:
Hi Tom,
On Fri, May 3, 2013 at 5:25 PM, Tom Rini tr...@ti.com wrote:
On Thu, May 02, 2013 at 05:46:02PM -0700, Simon Glass wrote:
Conflicting tags can prevent buildman from building two series which exist
one after the
Dear Kuo-Jung Su,
From: Kuo-Jung Su dant...@faraday-tech.com
There is at least one non-EHCI compliant controller (i.e. Faraday EHCI)
known to implement a non-standard TDI stuff.
Futhermore, it not only leave reserved and CONFIGFLAG registers
un-implemented but also has their address spaces
Dear Kuo-Jung Su,
From: Kuo-Jung Su dant...@faraday-tech.com
This patch makes the minimum power-on delay for USB HUB
become configurable. The original design waits at least
100 msec here, but some EHCI controlers(e.g. Faraday EHCI)
are known to require much longer delay interval.
Hi Julius,
On 5/11/2013 13:01, Julius Hemanth P wrote:
If Bo doesn't have any code in pipeline as of now, then I shall start
working on it.
Now, I don't have code in pipeline, you can work this on it.
Thanks.
BTW, you can take the reference code on github:
Hello Masahiro-san
Hi, Marek Vasut
Hello Masahiro-san,
Dear Andrew Gabbasov,
This way of starting emails seems to be dangerously widely adopted ;-D
Thank you for your respond, but I could not understand what you mean.
Do you mean that starting emails with Dear is something
Hi Simon,
Thank you for reviewing the patch set.
You need to apply the following patches for it to compile and work fine.
EXYNOS: Add API for power reset and exit wakeup
EXYNOS: LDS file move to common
EXYNOS4210: Configure GPIO for uart
EXYNOS: Move files from board/samsung to arch/arm.
From
Hi Tom,
On Sun, May 12, 2013 at 12:20 AM, Tom Rini tr...@ti.com wrote:
On Sat, May 11, 2013 at 11:27:41PM +0800, Sonic Zhang wrote:
Hi Tom,
On Thu, May 9, 2013 at 8:09 PM, Tom Rini tr...@ti.com wrote:
Some number of these changes haven't been posted to the list for review
yet. I'm
Hi Simon,
I applied the V5 patches on the latest u-boot-samsung tree and need
seem to compile fine.
Yes I will need to rebase them once the MMC patches get in, but will
wait for comments from Minkyu Kang as well
so that I can incorporate them and rebase the patch set once the MMC
patches get in.
Signed-off-by: Masahiro Yamada yamad...@jp.panasonic.com
---
.gitignore |6 ++
1 file changed, 6 insertions(+)
diff --git a/.gitignore b/.gitignore
index ed21203..4116448 100644
--- a/.gitignore
+++ b/.gitignore
@@ -79,5 +79,11 @@ cscope.*
/ctags
/etags
+# gnu global files
+GPATH
Hi Simon,
Thank you for reviewing the patches.
Will soon send a patch to add the serial FDT nodes to snow as well.
Regards,
Rajeshwari Shinde.
On Sat, May 11, 2013 at 11:41 PM, Simon Glass s...@chromium.org wrote:
On Tue, Apr 2, 2013 at 12:46 AM, Rajeshwari Shinde
rajeshwar...@samsung.com
Hi all,
I'm unable to receive DHCP packets using qemu-system-arm 1.4.91 with
u-boot (commit: 2988eac). Problem occurs on Ubuntu 12.04 (I tried also
Debian wheezy and there was no issue). I accidentally discover that
adding '-net dump,file=/tmp/dump.pcap' cause that problem disapear, but
want
From: Sonic Zhang sonic.zh...@analog.com
Signed-off-by: Sonic Zhang sonic.zh...@analog.com
---
arch/blackfin/cpu/initcode.c |7 +--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index 4b10b6c..8ef0b92 100644
---
From: Sonic Zhang sonic.zh...@analog.com
Signed-off-by: Sonic Zhang sonic.zh...@analog.com
---
arch/blackfin/cpu/serial.c | 60 +++-
1 files changed, 59 insertions(+), 1 deletions(-)
diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c
From: Sonic Zhang sonic.zh...@analog.com
Remove blackfin specific implementation of the generic serial API when
early print macro is defined.
In BFIN_BOOT_BYPASS mode, don't call generic serial_puts, because
early print in bypass mode is running before code binary is relocated
to the link
On Monday 13 May 2013 00:20:15 Sonic Zhang wrote:
Remove blackfin specific implementation of the generic serial API when
early print macro is defined.
In BFIN_BOOT_BYPASS mode, don't call generic serial_puts, because
early print in bypass mode is running before code binary is relocated
to
Hello Simon,
Am 11.05.2013 23:17, schrieb Simon Glass:
Hi Heiko,
On Sat, May 4, 2013 at 6:01 AM, Heiko Schocher h...@denx.de wrote:
Signed-off-by: Heiko Schocher h...@denx.de
Signed-off-by: Simon Glass s...@chromium.org
Cc: Henrik Nordström hen...@henriknordstrom.net
---
- changes for
Hi Simon,
Hi Akshay,
On Wed, Apr 3, 2013 at 12:27 AM, Akshay Saraswat aksha...@samsung.com wrote:
Exynos5 currently runs at full speed i.e. 1.7 GHz everytime.
Scaling down the clock speed in certain situations, may help in
reducing the ARM temperature and power consumption.
Signed-off-by:
This patch set adds cpu frequency scaling and tmu throttling
for exynos5.
Changes since v1:
- Patch-1: Added comment for the set voltage API.
- Patch-2: Added Acked-by: Simon Glass.
- Patch-3: Added Acked-by: Simon Glass.
- Patch-4: Added Acked-by: Simon Glass.
This patch adds pmic_set_voltage api in max77686.
As the name suggests, this api is required for switching
voltage from one level to another. Unit for the new
voltage value should be microvolts.
Signed-off-by: Akshay Saraswat aksha...@samsung.com
---
Changes since v1:
- Added comment for
Exynos5 currently runs at full speed i.e. 1.7 GHz everytime.
Scaling down the clock speed in certain situations, may help in
reducing the ARM temperature and power consumption.
Signed-off-by: Akshay Saraswat aksha...@samsung.com
Acked-by: Simon Glass s...@chromium.org
---
Changes since v1:
Adding tmu throttling support to smdk5250.
Signed-off-by: Akshay Saraswat aksha...@samsung.com
Acked-by: Simon Glass s...@chromium.org
---
Changes since v1:
- Added Acked-by: Simon Glass.
board/samsung/smdk5250/smdk5250.c | 19 +++
1 file changed, 19 insertions(+)
This patch enables cpu freq support for exynos5 by adding
config for it.
Signed-off-by: Akshay Saraswat aksha...@samsung.com
Acked-by: Simon Glass s...@chromium.org
---
Changes since v1:
- Added Acked-by: Simon Glass.
include/configs/exynos5250-dt.h |3 +++
1 file changed, 3
Hi Akshay,
On Sun, May 12, 2013 at 11:15 PM, Akshay Saraswat aksha...@samsung.com wrote:
Hi Simon,
Hi Akshay,
On Wed, Apr 3, 2013 at 12:27 AM, Akshay Saraswat aksha...@samsung.com wrote:
Exynos5 currently runs at full speed i.e. 1.7 GHz everytime.
Scaling down the clock speed in certain
Hi Simon,
Thank you for review comments,
On Sat, May 11, 2013 at 8:38 PM, Simon Glass s...@chromium.org wrote:
On Fri, Mar 22, 2013 at 6:45 PM, Simon Glass s...@chromium.org wrote:
Hi Rajeshwari,
On Fri, Mar 22, 2013 at 5:28 AM, Rajeshwari Shinde
rajeshwar...@samsung.com wrote:
This
Hello Simon,
Am 11.05.2013 23:33, schrieb Simon Glass:
Hi Heiko,
On Sat, May 4, 2013 at 6:01 AM, Heiko Schocher h...@denx.de wrote:
Signed-off-by: Heiko Schocher h...@denx.de
Signed-off-by: Simon Glass s...@chromium.org
Cc: Henrik Nordström hen...@henriknordstrom.net
---
- changes for
68 matches
Mail list logo