Hi Albert,
first, thank you very much for taking the time to go over this
in such depth.
On 25.11.2015 16:20, Albert ARIBAUD wrote:
Hello all,
This is a follow-up to discussions on the IRC chan re: the fact that gd
(the global data pointer) is being assigned in various places, which is
not too
On 26.11.2015 04:17, Chin Liang See wrote:
Adding new environment usbload which will load zImage and
Linux DTB from USB mass storage through FAT file system.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
---
include/config
On 26.11.2015 03:32, Chin Liang See wrote:
Adding new environment qspiload which will load zImage and
Linux DTB from serial NOR flash. The default flash offset for
the images as below and they are configurable during run time.
- zImage located at 0xa with assuming file size 6MB
- Linux DTB l
On 11/03/2015 10:55 PM, Prabhakar Kushwaha wrote:
> Management complex Firmware, DPL and DPC are depolyed during u-boot boot
> sequence.
>
> Add new DPAA2 commands to manage Management Complex (MC) i.e. start mc, aiop
> and apply DPL from u-boot command prompt.
>
> Signed-off-by: Prabhakar Kush
The early MMU table doesn't enable all addresses. Unused addresses
are marked as invalid, as introduced by commit 9979922. An entry
was missing for NAND flash space, causing nand boot failure.
Signed-off-by: York Sun
CC: Alison Wang
CC: Prabhakar Kushwaha
---
Changes in v2:
Reduce the IFC m
Acked-by: Jaehoon Chung
On 11/26/2015 10:43 AM, Chin Liang See wrote:
> socfpga_dw_mmc driver will obtain the drvsel and
> smplsel value from device tree instead of definition
> in config header file.
>
> Signed-off-by: Chin Liang See
> Cc: Dinh Nguyen
> Cc: Dinh Nguyen
> Cc: Pavel Machek
>
> -Original Message-
> From: York Sun [mailto:york...@freescale.com]
> Sent: Thursday, November 26, 2015 1:03 AM
> To: Xie Shaohui-B21989; Ciubotariu Codrin Constantin-B43658
> Cc: Yuanzheng Li; u-boot@lists.denx.de; Liu Dave-R63238
> Subject: Re: [PATCH] eth: dtsec: fix TBI ANA setting bug
Adding new environment usbload which will load zImage and
Linux DTB from USB mass storage through FAT file system.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
---
include/configs/socfpga_arria5_socdk.h | 5 -
include/
From: Chin Liang See
socfpga_dw_mmc driver will obtain the drvsel and
smplsel value from device tree instead of definition
in config header file.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Pantelis Antoniou
Cc: Simon
Adding new environment qspiload which will load zImage and
Linux DTB from serial NOR flash. The default flash offset for
the images as below and they are configurable during run time.
- zImage located at 0xa with assuming file size 6MB
- Linux DTB located at 0x5 with assuming file size 28k
On Thu, Nov 26, 2015 at 10:26 AM, Peng Fan wrote:
> The following code will alloc memory for new_dev and ldev:
> "
> new_dev = mdio_alloc();
> ldev = malloc(sizeof(*ldev));
> "
> Either new_dev or ldev is NULL, directly return, but this may leak memory.
> So before return, using free(ldev) and mdi
The following code will alloc memory for new_dev and ldev:
"
new_dev = mdio_alloc();
ldev = malloc(sizeof(*ldev));
"
Either new_dev or ldev is NULL, directly return, but this may leak memory.
So before return, using free(ldev) and mdio_free(new_dev) to avoid
leaking memory, also free can handle NUL
On Thu, Nov 26, 2015 at 02:35:28AM +0100, Marek Vasut wrote:
>On Thursday, November 26, 2015 at 02:27:01 AM, Peng Fan wrote:
>> Hi Marek,
>>
>> On Thu, Nov 26, 2015 at 12:15:44AM +0100, Marek Vasut wrote:
>> >The following patch changed the PFUZE100 swbst register bit definitions
>> >and broke PMI
Adding new node drvsel and smplsel for SDMMC
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Pantelis Antoniou
Cc: Simon Glass
Cc: Jaehoon Chung
---
Changes for v3
- Split patch to separte DTS and driver patches
---
arch
socfpga_dw_mmc driver will obtain the drvsel and
smplsel value from device tree instead of definition
in config header file.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Pantelis Antoniou
Cc: Simon Glass
Cc: Jaehoon Chu
NORTHBRIDGE_INTEL_SANDYBRIDGE is for sandybridge, not ivybridge.
Signed-off-by: Bin Meng
---
Changes in v2:
- Remove NORTHBRIDGE_INTEL_SANDYBRIDGE in Makefile too.
arch/x86/cpu/Makefile | 1 -
arch/x86/cpu/ivybridge/Kconfig | 33 +
2 files changed, 1
These are currently dead codes. Until we have complete ACPI support,
we don't know if it works or not. Remove to avoid confusion.
Signed-off-by: Bin Meng
Acked-by: Simon Glass
---
Changes in v2: None
arch/x86/cpu/ivybridge/cpu.c | 9 -
arch/x86/cpu/ivybridge/lpc.c
This Kconfig option name indicates it has something to do with cpu
socket, however it is actually not the case. Remove it and move
options inside it to NORTHBRIDGE_INTEL_IVYBRIDGE.
Signed-off-by: Bin Meng
Acked-by: Simon Glass
---
Changes in v2: None
arch/x86/cpu/ivybridge/Kconfig | 1
There are some options which are never used, and also some options
which are selected by others but have never been a Kconfg option.
Clean these up.
Signed-off-by: Bin Meng
Acked-by: Simon Glass
---
Changes in v2: None
arch/x86/cpu/ivybridge/Kconfig | 30 --
On Thu, 2015-11-26 at 10:33 +0900, Jaehoon Chung wrote:
> On 11/26/2015 10:10 AM, Chin Liang See wrote:
> > socfpga_dw_mmc driver will obtain the drvsel and
> > smplsel value from device tree instead of definition
> > in config header file.
> >
> > Signed-off-by: Chin Liang See
> > Cc: Dinh Nguye
On Thursday, November 26, 2015 at 02:27:01 AM, Peng Fan wrote:
> Hi Marek,
>
> On Thu, Nov 26, 2015 at 12:15:44AM +0100, Marek Vasut wrote:
> >The following patch changed the PFUZE100 swbst register bit definitions
> >and broke PMIC configuration on multiple boards, at least on the novena
> >and g
On 11/26/2015 10:10 AM, Chin Liang See wrote:
> socfpga_dw_mmc driver will obtain the drvsel and
> smplsel value from device tree instead of definition
> in config header file.
>
> Signed-off-by: Chin Liang See
> Cc: Dinh Nguyen
> Cc: Dinh Nguyen
> Cc: Pavel Machek
> Cc: Marek Vasut
> Cc: Ste
On Thu, 2015-11-26 at 02:26 +0100, Marek Vasut wrote:
> On Thursday, November 26, 2015 at 02:10:04 AM, Chin Liang See wrote:
> > socfpga_dw_mmc driver will obtain the drvsel and
> > smplsel value from device tree instead of definition
> > in config header file.
> >
> > Signed-off-by: Chin Liang Se
Hi Marek,
On Thu, Nov 26, 2015 at 12:15:44AM +0100, Marek Vasut wrote:
>The following patch changed the PFUZE100 swbst register bit definitions
>and broke PMIC configuration on multiple boards, at least on the novena
>and gw_ventana. This patch fixes it.
>
>commit 8fa46350a4c7dca7710362f6c871098557
On Thursday, November 26, 2015 at 02:10:04 AM, Chin Liang See wrote:
> socfpga_dw_mmc driver will obtain the drvsel and
> smplsel value from device tree instead of definition
> in config header file.
>
> Signed-off-by: Chin Liang See
> Cc: Dinh Nguyen
> Cc: Dinh Nguyen
> Cc: Pavel Machek
> Cc:
On Wednesday, November 25, 2015 at 06:57:48 AM, Ted Chen wrote:
> Add a condition of set_address and set_configuration to check
> if the request is standardized.
>
> Signed-off-by: Ted Chen
> ---
> drivers/usb/host/xhci.c |6 --
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff
socfpga_dw_mmc driver will obtain the drvsel and
smplsel value from device tree instead of definition
in config header file.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Pantelis Antoniou
Cc: Simon Glass
Cc: Jaehoon Chu
Hi Marek,
On Thu, 2015-11-26 at 01:50 +0100, Marek Vasut wrote:
> On Thursday, November 26, 2015 at 01:41:12 AM, clsee wrote:
> > From: Chin Liang See
> >
> > socfpga_dw_mmc driver will obtain the drvsel and
> > smplsel value from device tree instead of definition
> > in config header file.
> >
On Thursday, November 26, 2015 at 01:41:12 AM, clsee wrote:
> From: Chin Liang See
>
> socfpga_dw_mmc driver will obtain the drvsel and
> smplsel value from device tree instead of definition
> in config header file.
>
> Signed-off-by: Chin Liang See
> Cc: Dinh Nguyen
> Cc: Dinh Nguyen
> Cc: P
From: Chin Liang See
socfpga_dw_mmc driver will obtain the drvsel and
smplsel value from device tree instead of definition
in config header file.
Signed-off-by: Chin Liang See
Cc: Dinh Nguyen
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Marek Vasut
Cc: Stefan Roese
Cc: Pantelis Antoniou
Cc: Simon
On Wednesday 25 November 2015 16:55:54 Sumeet Jauhar wrote:
> Hello All,
>
> I am new to Rpi and for a project I need to install Uboot for Rpi. For
> starters I installed Raspbian-jessie to the pi and it worked fine. Now I am
> attempting to use uboot but I don't succeed. I am trying to follow the
On Friday 20 November 2015 08:52:54 Martin Orgonas wrote:
> Hello,
>
> I have Raspberry Pi Model B+ V1.2.
> I would like to use official Raspbian OS with U-Boot.
> When Raspberry Pi turn on then U-Boot starts and run Raspbian kernel.img.
> But i do not have anything kernel boot message on LCD moni
On 2015-11-25, Marek Vasut wrote:
> The following patch changed the PFUZE100 swbst register bit definitions
> and broke PMIC configuration on multiple boards, at least on the novena
> and gw_ventana. This patch fixes it.
>
> commit 8fa46350a4c7dca7710362f6c871098557b934ad
> Author: Peng Fan
> Date
Simple patch to enable support for extfs filesystem in SPL,
this is useful to those who want to avoid vfat like plague.
Signed-off-by: Marek Vasut
Cc: Stefano Babic
---
include/configs/novena.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/novena.h b/include/configs/novena
The following patch changed the PFUZE100 swbst register bit definitions
and broke PMIC configuration on multiple boards, at least on the novena
and gw_ventana. This patch fixes it.
commit 8fa46350a4c7dca7710362f6c871098557b934ad
Author: Peng Fan
Date: Fri Aug 7 16:43:45 2015 +0800
power: r
The early MMU table doesn't enable all addresses. Unused addresses
are marked as invalid, as introduced by commit 9979922. An entry
was missing for NAND flash space, causing nand boot failure.
Signed-off-by: York Sun
CC: Alison Wang
CC: Prabhakar Kushwaha
---
arch/arm/include/asm/arch-fsl-la
On 2015-11-24, Marek Vasut wrote:
> From: Vagrant Cascadian
>
> Switch Novena to distro bootcmd, so it can be used with debian easily.
>
> Signed-off-by: Vagrant Cascadian
> Signed-off-by: Marek Vasut
> Cc: Sean Cross
> Cc: Stefano Babic
> ---
> include/configs/novena.h | 23 +
On Tue, Nov 24, 2015 at 09:25:08AM +0100, Stefan Roese wrote:
> Enabling the new tiny-printf function makes the SPL image fit again in
> the 8KiB restricted area.
>
> Signed-off-by: Stefan Roese
> Cc: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital sign
On Wed, Nov 25, 2015 at 05:34:54AM -0800, Bin Meng wrote:
> There are already Kconfig options for SPI flash drivers, but we
> have not moved them from config.h to defconfig files. This commit
> does this in a batch.
>
> Signed-off-by: Bin Meng
Applied to u-boot/master, thanks!
--
Tom
signat
On Wed, Nov 25, 2015 at 05:34:53AM -0800, Bin Meng wrote:
> There are already Kconfig options for SPI drivers, but we
> have not moved them from config.h to defconfig files. This
> commit does this in a batch.
>
> Signed-off-by: Bin Meng
Applied to u-boot/master, thanks!
--
Tom
signature.as
Signed-off-by: Stefan Monnier
---
disk/part_dos.c | 29 +
include/ide.h | 8
2 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/disk/part_dos.c b/disk/part_dos.c
index 89263d3..6280660 100644
--- a/disk/part_dos.c
+++ b/disk/part_dos.c
@@ -26,
I just bumped into a problem where U-Boot refused to boot from my disk's
second partition because the sector number is "negative".
More specifically, my disk drive is 2TB, which means that the number of
512B blocks fits into an unsigned 32bit int but not into a signed 32bit
int. U-boot's "scsi par
On 11/23/2015 10:42 PM, Kushwaha Prabhakar-B32579 wrote:
>
>> -Original Message-
>> From: York Sun [mailto:york...@freescale.com]
>> Sent: Tuesday, November 24, 2015 11:14 AM
>> To: Kushwaha Prabhakar-B32579 ; u-
>> b...@lists.denx.de
>> Cc: Srivastava Pratiyush-B46174
>> Subject: Re: [
Hi Simon,
>>>
>>
>> Two biggest feature gaps so far are complete ACPI support, and SMM
>> support. ACPI is pretty much a must-have if we want power management
>> feature in the OS. F).
>>
>> ACPI support seems to be a must if we want to support booting Windows,
>> also we may need help from SeaBIO
+ Experts
On 11/24/2015 11:04 PM, Yuanzheng Li wrote:
> The TBI_ANA register is configurated with the wrong value 0x4001, refer
> to QorIQ Data Path Acceleration Architecture (DPAA) Reference Manual.
> It set the reserved areas, bit 1 and bit 11 to bit 15 in big endian,
> which should be cleared.
As of gcc 5.2.1 for Thumb-1, it is not possible any
more to assign gd from C code, as gd is mapped to r9,
and r9 may now be saved in the prolog sequence, and
restored in the epilog sequence, of any C functions.
Therefore arch_setup_gd(), which is supposed to set
r9, may actually have no effect, ca
board_init_f_mem() alters the C runtime environment's
stack it is actually already using. This is not a valid
behaviour within a C runtime environment.
Split board_init_f_mem into C functions which do not alter
their own stack and always behave properly with respect to
their C runtime environment.
On 25 November 2015 at 01:45, Bin Meng wrote:
> This Kconfig option name indicates it has something to do with cpu
> socket, however it is actually not the case. Remove it and move
> options inside it to NORTHBRIDGE_INTEL_IVYBRIDGE.
>
> Signed-off-by: Bin Meng
> ---
>
> arch/x86/cpu/ivybridge/Kc
On 25 November 2015 at 01:45, Bin Meng wrote:
> NORTHBRIDGE_INTEL_SANDYBRIDGE is for sandybridge, not ivybridge.
>
> Signed-off-by: Bin Meng
> ---
>
> arch/x86/cpu/ivybridge/Kconfig | 33 +
> 1 file changed, 1 insertion(+), 32 deletions(-)
Acked-by: Simon Glass
Hi Bin,
On 19 November 2015 at 20:38, Bin Meng wrote:
> Hi Simon,
>
> On Fri, Nov 20, 2015 at 11:09 AM, Simon Glass wrote:
>> Hi,
>>
>> I'm wondering what might come next for U-Boot x86 support.
>>
>> The PCI conversion to driver model is coming along nicely. The ACPI
>> support is only partiall
On 25 November 2015 at 01:45, Bin Meng wrote:
> These are currently dead codes. Until we have complete ACPI support,
> we don't know if it works or not. Remove to avoid confusion.
>
> Signed-off-by: Bin Meng
> ---
>
> arch/x86/cpu/ivybridge/cpu.c | 9 -
> arch/x86/cpu/ivybridg
On 25 November 2015 at 01:45, Bin Meng wrote:
> There are some options which are never used, and also some options
> which are selected by others but have never been a Kconfg option.
> Clean these up.
>
> Signed-off-by: Bin Meng
> ---
>
> arch/x86/cpu/ivybridge/Kconfig | 30 -
Hi,
On 24 November 2015 at 23:44, Bin Meng wrote:
> On Wed, Nov 25, 2015 at 11:20 AM, Thomas Chou wrote:
>> Hi Simon,
>>
>> On 2015年11月25日 02:23, Simon Glass wrote:
>>>
>>>
>>> Please try u-boot-dm/testing. This seems to be a different problem:
>>>
>>> avr32: + grasshopper
>>> +lib/time
Yuan,
On 11/25/2015 01:14 AM, Yuan Yao-B46683 wrote:
> Hi Sinan Akman,
>
> Thanks for your review.
> There should not cause any problem with Rev1.0.
> The workaround should also apply to rev1.0.
Please squash your patch 4 & 5 and update your comment and commit message.
The erratum document chang
Hello all,
This is a follow-up to discussions on the IRC chan re: the fact that gd
(the global data pointer) is being assigned in various places, which is
not too much of a good thing.
In all architectures, common/init/board_init.c is built in, which
provides board_init_f_{mem,init_reserve}, in w
This patch writes the default values for TXTL and RXTL to UARTx_UFCR.
Without this patch some older kernel versions crash as UARTx_UFCR was
not always correctly initialized.
Signed-off-by: Maximilian Schwerin
---
drivers/serial/serial_mxc.c | 9 -
1 file changed, 8 insertions(+), 1 delet
There are already Kconfig options for SPI drivers, but we
have not moved them from config.h to defconfig files. This
commit does this in a batch.
Signed-off-by: Bin Meng
---
configs/B4420QDS_NAND_defconfig| 1 +
configs/B4420QDS_SPIFLASH_defconfig| 1
On Wednesday, November 25, 2015 at 02:15:13 PM, Przemyslaw Marczak wrote:
> On 11/25/2015 01:16 PM, Marek Vasut wrote:
> > On Wednesday, November 25, 2015 at 01:00:41 PM, Przemyslaw Marczak wrote:
> >> Hello Marek,
> >>
> >> On 11/25/2015 11:56 AM, Marek Vasut wrote:
> >>> On Wednesday, November 2
On 11/25/2015 01:16 PM, Marek Vasut wrote:
On Wednesday, November 25, 2015 at 01:00:41 PM, Przemyslaw Marczak wrote:
Hello Marek,
On 11/25/2015 11:56 AM, Marek Vasut wrote:
On Wednesday, November 25, 2015 at 11:40:36 AM, Przemyslaw Marczak wrote:
Hello Tim, Marek
On 11/20/2015 10:40 PM, Tim
On Wednesday, November 25, 2015 at 01:00:41 PM, Przemyslaw Marczak wrote:
> Hello Marek,
>
> On 11/25/2015 11:56 AM, Marek Vasut wrote:
> > On Wednesday, November 25, 2015 at 11:40:36 AM, Przemyslaw Marczak wrote:
> >> Hello Tim, Marek
> >>
> >> On 11/20/2015 10:40 PM, Tim Harvey wrote:
> >>> On
Hello Marek,
On 11/25/2015 11:56 AM, Marek Vasut wrote:
On Wednesday, November 25, 2015 at 11:40:36 AM, Przemyslaw Marczak wrote:
Hello Tim, Marek
On 11/20/2015 10:40 PM, Tim Harvey wrote:
On Fri, Nov 20, 2015 at 12:43 PM, Marek Vasut wrote:
Using 50 MiB malloc pool in SPL is nonsense. Sinc
After the conversion to SPL the defconfig was renamed, so adjust it.
Signed-off-by: Otavio Salvador
---
board/congatec/cgtqmx6eval/MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/congatec/cgtqmx6eval/MAINTAINERS
b/board/congatec/cgtqmx6eval/MAINTAINERS
ind
On Wednesday, November 25, 2015 at 11:40:36 AM, Przemyslaw Marczak wrote:
> Hello Tim, Marek
>
> On 11/20/2015 10:40 PM, Tim Harvey wrote:
> > On Fri, Nov 20, 2015 at 12:43 PM, Marek Vasut wrote:
> >> Using 50 MiB malloc pool in SPL is nonsense. Since the caches are not
> >> enabled in SPL, it ta
Hello Tim, Marek
On 11/20/2015 10:40 PM, Tim Harvey wrote:
On Fri, Nov 20, 2015 at 12:43 PM, Marek Vasut wrote:
Using 50 MiB malloc pool in SPL is nonsense. Since the caches are not
enabled in SPL, it takes 2 seconds to init the pool and has no obvious
benefit. Reduce the size to 1 MiB.
Signe
Hi Peter,
On 24/11/2015 15:38, Bärtsch Peter wrote:
> Hello Stefano,
>
>
>
> I have seen , that my patch already exist :o but not active in master
> branch.
>
> Follow patch is the original from Ye.Le
If you take a patch from someone else, you cannot change author.
Patch was ok, but it was
In fact I tried each of the branches ; mainline ; Stephen Warren and also
Olex's branch. Olex branch seems to have USB support but it does not work for
me . I get a different error now .
Saying the "Unrecognized filesystem type **"
https://www.dropbox.com/s/n987ko6fxajco7p/P_20151125_182109.jpg
On Wednesday 25 November 2015 02:20:53, Huan Wang wrote:
> [Alison Wang] I didn't meet any issue when using sf commands to write and
> read the serial flash.
>
> Hi, Alexander,
>
> Could you show me the detail commands and process when you meet
> such issue? Then I can try to reproduce on m
Hello Jeroen,
that fixed the build problem ! many thanks:-)
Best regards,
Ayoub
2015-11-25 10:54 GMT+01:00 Jeroen Hofstee :
> Hello Ayoub,
>
>
> On 25-11-15 10:35, Ayoub Zaki wrote:
>
>> we have an am335x based custom board that use for our Project.
>> At the moment only a customized version o
Hello Ayoub,
On 25-11-15 10:35, Ayoub Zaki wrote:
we have an am335x based custom board that use for our Project.
At the moment only a customized version of uboot-2013.01.01 supports this
board.
As we use Yocto toolchains and we plan to upgrade to latest Yocto-2.0 that
comes with GCC5.2.
I would
Hello,
we have an am335x based custom board that use for our Project.
At the moment only a customized version of uboot-2013.01.01 supports this
board.
As we use Yocto toolchains and we plan to upgrade to latest Yocto-2.0 that
comes with GCC5.2.
I would like to be able to build this custom old ver
The pin multiplexing for the chip select pin was until now done in
spi_setup_slave/spi_free_slave. If an SPI slave was probed, its chip
select pin was never configured back to the possible alternate pin usage
until spi_free_slave was called, even if the bus was released and the
pins give back to th
Hello All,
I am new to Rpi and for a project I need to install Uboot for Rpi. For starters
I installed Raspbian-jessie to the pi and it worked fine. Now I am attempting
to use uboot but I don't succeed. I am trying to follow the instructions
http://elinux.org/RPi_U-Boot and http://arrizza.org/
The TBI_ANA register is configurated with the wrong value 0x4001, refer
to QorIQ Data Path Acceleration Architecture (DPAA) Reference Manual.
It set the reserved areas, bit 1 and bit 11 to bit 15 in big endian,
which should be cleared. But the normal functions of the auto-negotiation,
e.g. Pause an
From: Ted Chen
This patch adds driver support for the Realtek RTL8152B/RTL8153 USB
network adapters.
Signed-off-by: Ted Chen
[swarren, fixed a few compiler warnings]
[swarren, with permission, converted license header to SPDX]
[swarren, removed printf() spew during probe()]
Signed-off-by: Steph
Add a condition of set_address and set_configuration to check
if the request is standardized.
Signed-off-by: Ted Chen
---
drivers/usb/host/xhci.c |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ca598aa..cb8a04b
Add a condition of set_address and set_configuration to check
if the request is standardized.
Signed-off-by: Ted Chen
---
drivers/usb/host/xhci.c |6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ca598aa..cb8a04b
Hello Stefano,
I have seen , that my patch already exist :o but not active in master branch.
Follow patch is the original from Ye.Le
Kind regards
Peter Bärtsch
On mx6sx, the CCM register bits for GPMI are different as other
mx6 platforms. Modify the GPMI clock function to support mx6sx.
Signe
Hi Ted,
On 25 November 2015 at 11:27, Ted Chen wrote:
> Add a condition of set_address and set_configuration to check
> if the request is standardized.
>
> Signed-off-by: Ted Chen
> ---
> drivers/usb/host/xhci.c |6 --
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/d
Hi Ted,
On 25 November 2015 at 11:00, Ted Chen wrote:
> From: Ted Chen
>
> This patch adds driver support for the Realtek RTL8152B/RTL8153 USB
> network adapters.
>
> Signed-off-by: Ted Chen
> [swarren, fixed a few compiler warnings]
> [swarren, with permission, converted license header to SPDX
Need to free memory avoid memory leak, when error.
Signed-off-by: Peng Fan
Cc: Simon Glass
Cc: Tom Rini
---
common/cli_hush.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/common/cli_hush.c b/common/cli_hush.c
index f075459..ab85225 100644
--- a/common/cli_hush.c
+++ b
"enable" is unsigned char type and its value will not be
negative, so discard "enable < 0".
Signed-off-by: Peng Fan
Cc: Diego Santa Cruz
Cc: Pantelis Antoniou
Cc: Andrew Gabbasov
Cc: Simon Glass
Cc: Stefano Babic
Cc: Tom Rini
---
common/cmd_mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 d
Hi Sinan Akman,
Thanks for your review.
There should not cause any problem with Rev1.0.
The workaround should also apply to rev1.0.
Best Regards,
Yuan Yao
> -Original Message-
> From: Sinan Akman [mailto:si...@writeme.com]
> Sent: Wednesday, November 25, 2015 12:10 AM
> To: Yuan Yao-B466
Hi Tom,
On 11/24/2015 07:56 PM, Tom Rini wrote:
On Tue, Nov 24, 2015 at 10:56:41AM +0100, Przemyslaw Marczak wrote:
Hello Tom,
On 11/23/2015 11:44 PM, Tom Rini wrote:
On Fri, Nov 20, 2015 at 08:06:16AM +0100, Lukasz Majewski wrote:
This commit provides definition and declaration of GPT veri
since:
commit: f05ad9ba "Add a way to skip relocation"
tqm5200s board fails to boot. Reason is that
board_init_f has a function parameter bootflag,
which is not setup in
in arch/powerpc/cpu/mpc5xxx/start.S _start
So board_init_f gets a undefined bootflag,
currently the gd pointer address. Unfortu
Hi Otavio,
On 19/11/2015 22:02, Otavio Salvador wrote:
> Congatec has several MX6 boards based on quad, dual, dual-lite and solo.
>
> Add SPL support so that all the variants can be supported
>
> Signed-off-by: Otavio Salvador
> ---
>
Whole series applied to u-boot-imx, thanks !
Best regards
This Kconfig option name indicates it has something to do with cpu
socket, however it is actually not the case. Remove it and move
options inside it to NORTHBRIDGE_INTEL_IVYBRIDGE.
Signed-off-by: Bin Meng
---
arch/x86/cpu/ivybridge/Kconfig | 15 ---
board/google/chromebook_l
These are currently dead codes. Until we have complete ACPI support,
we don't know if it works or not. Remove to avoid confusion.
Signed-off-by: Bin Meng
---
arch/x86/cpu/ivybridge/cpu.c | 9 -
arch/x86/cpu/ivybridge/lpc.c | 9 -
arch/x86/cpu/ivybridge/nort
There are some options which are never used, and also some options
which are selected by others but have never been a Kconfg option.
Clean these up.
Signed-off-by: Bin Meng
---
arch/x86/cpu/ivybridge/Kconfig | 30 --
board/google/chromebook_link/Kconfig |
NORTHBRIDGE_INTEL_SANDYBRIDGE is for sandybridge, not ivybridge.
Signed-off-by: Bin Meng
---
arch/x86/cpu/ivybridge/Kconfig | 33 +
1 file changed, 1 insertion(+), 32 deletions(-)
diff --git a/arch/x86/cpu/ivybridge/Kconfig b/arch/x86/cpu/ivybridge/Kconfig
index
89 matches
Mail list logo