Hi Chi,
On 10.11.2016 03:16, Kever Yang wrote:
Hi Chi,
On 11/10/2016 12:51 AM, Ding, ChiX wrote:
Hi there
I'm having problem getting USB 3.0 controller working properly on the
Intel Denverton x86 board.
First I tried to use xhci driver, but there doesn't seem to be any
xhci driver or generic d
According to Section 11.15.4.9.2 Indirect Write Controller of K2G SoC
TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit
data interface writes until the last word of an indirect transfer
otherwise indirect writes is known to fails sometimes. So, make sure
that QSPI indirect writ
> On 7 November 2016 at 02:21, Alison Wang wrote:
> >> On 11/04/2016 10:12 AM, Alexander Graf wrote:
> >> >
> >> >
> >> > On 04/11/2016 17:08, york sun wrote:
> >> >> On 11/04/2016 09:53 AM, Alexander Graf wrote:
> >> >>>
> >> >>>
> >> >>> On 04/11/2016 16:43, york sun wrote:
> >> On 11/04/20
This series is to support loading a 32-bit OS, the execution state will change
from AArch64 to AArch32 when jumping to kernel. The architecture information
will be got through checking FIT image, then U-Boot will load 32-bit OS or
64-bit OS automatically.
Spin-table method is used for secondary
Spin-table method is used for secondary cores to load 32-bit OS. The
architecture information will be got through checking FIT image and
saved in the os_arch element of spin-table, then the secondary cores
will check os_arch and jump to 32-bit OS or 64-bit OS automatically.
Signed-off-by: Alison W
As PSCI and secure monitor firmware framework are enabled, this patch is
to support loading 32-bit OS in such case. The default target exception
level returned to U-Boot is EL2, so the corresponding work to switch to
AArch32 EL2 and jump to 32-bit OS are done in U-Boot and secure firmware
together.
To support loading a 32-bit OS, the execution state will change from
AArch64 to AArch32 when jumping to kernel.
The architecture information will be got through checking FIT image,
then U-Boot will load 32-bit OS or 64-bit OS automatically.
Signed-off-by: Ebony Zhu
Signed-off-by: Alison Wang
Si
Hi Chi,
On 11/10/2016 12:51 AM, Ding, ChiX wrote:
Hi there
I'm having problem getting USB 3.0 controller working properly on the Intel
Denverton x86 board.
First I tried to use xhci driver, but there doesn't seem to be any xhci driver
or generic driver for x86
I only found the following
xhci-e
Hi,
On 09-11-16 22:42, Priit Laes wrote:
On Tue, 2016-11-08 at 17:38 +0100, Olliver Schinagl wrote:
The BIT macro is the preferred method to set bits.
This patch adds the bit macro and converts bit invocations.
Signed-off-by: Olliver Schinagl
---
drivers/net/phy/realtek.c | 5 +++--
1 fil
On 11/08/2016 10:04 PM, Shengzhou Liu wrote:
>>
> If we keep A009942 workaround in fsl_ddr_gen4.c,
> 1) we have to duplicate 3 same implement of A009942 separately in
> mpc85xx_ddr_gen3.c, arm_ddr_gen3.c and fsl_ddr_gen4.c, that is not a good
> idea.
> 2) we have to modify more code struct to in
On 11/08/2016 10:34 AM, Marcel Ziswiler wrote:
> Optional driver model handling integration.
>
> Signed-off-by: Marcel Ziswiler
> ---
>
> Changes in v2: None
[...]
> @@ -164,6 +130,7 @@ void pxa_putc_dev(unsigned int uart_index, const char c)
> if (!uart_regs)
> hang();
>
On 11/08/2016 10:34 AM, Marcel Ziswiler wrote:
> Migrate the PXA serial driver to be configured via Kconfig.
>
> Signed-off-by: Marcel Ziswiler
> ---
>
> Changes in v2: None
Reviewed-by: Marek Vasut
--
Best regards,
Marek Vasut
___
U-Boot mailing
On 09/11/2016 10:50, Stephen Warren wrote:
On 11/09/2016 04:43 AM, Alexander Graf wrote:
On 07/11/2016 22:26, Stephen Warren wrote:
On 11/06/2016 03:24 AM, Alexander Graf wrote:
On 05/11/2016 23:01, Stephen Warren wrote:
On 11/02/2016 03:36 AM, Alexander Graf wrote:
The rpi has a prett
On 11/09/2016 04:03 AM, Ashish Kumar wrote:
>>
>> Do you have substantial change beside the changing name from mc_ram_addr to
>> mc_ram_aligned_base_addr?
>> [Ashish Kumar] It is not exactly name change. Here intent is to use
>> userdefine memory size for MC before this only 512MB of memory can
In most cases, the SPL and u-boot.img will be on the same boot media.
Since the SPL was loaded by the boot rom, the pinmux will already have
been configured for this media. This, the board will still be able to
boot successfully, or at least reach the u-boot console, where more
recovery options are
Hi there
I'm having problem getting USB 3.0 controller working properly on the Intel
Denverton x86 board.
First I tried to use xhci driver, but there doesn't seem to be any xhci driver
or generic driver for x86
I only found the following
xhci-exynos5.c: { .compatible = "samsung,exynos5250-xhci"
On 11/09/2016 04:43 AM, Alexander Graf wrote:
On 07/11/2016 22:26, Stephen Warren wrote:
On 11/06/2016 03:24 AM, Alexander Graf wrote:
On 05/11/2016 23:01, Stephen Warren wrote:
On 11/02/2016 03:36 AM, Alexander Graf wrote:
The rpi has a pretty simple way of resetting the whole system. Al
On Wed, 9 Nov 2016 15:32:37 +0100
Maxime Ripard wrote:
> Hi Boris,
>
> On Tue, Nov 08, 2016 at 05:27:48PM +0100, Boris Brezillon wrote:
> > On Tue, 8 Nov 2016 17:21:13 +0100
> > Maxime Ripard wrote:
> >
> > > From: Hans de Goede
> > >
> > > Enable the NAND and UBI support in the configura
Hi Heiko,
On Wed, Nov 09, 2016 at 08:47:12AM +0100, Heiko Schocher wrote:
> Am 08.11.2016 um 17:21 schrieb Maxime Ripard:
> > The CHIP Pro is a SoM made by NextThing Co, and that embeds a GR8 SIP, an
> > AXP209 PMIC, a WiFi BT chip and a 512MB SLC NAND.
> >
> > Since the first Allwinner device co
Hi Boris,
On Tue, Nov 08, 2016 at 05:27:48PM +0100, Boris Brezillon wrote:
> On Tue, 8 Nov 2016 17:21:13 +0100
> Maxime Ripard wrote:
>
> > From: Hans de Goede
> >
> > Enable the NAND and UBI support in the configuration header so that we can
> > (finally) use it.
> >
> > Signed-off-by: Hans
Hi Tom,
On Tue, Nov 08, 2016 at 10:44:18PM -0500, Tom Rini wrote:
> On Tue, Nov 08, 2016 at 11:19:20AM +0100, Maxime Ripard wrote:
>
> [snip]
> > I think the biggest drawback at the moment is that we maintain a list of
> > DIPs and the actions needed directly into the C code, which will make it
>
Hello York,
Please see inline.
Regards
-Original Message-
From: york sun
Sent: Tuesday, November 08, 2016 11:38 PM
To: Ashish Kumar ; Priyanka Jain ;
u-boot@lists.denx.de
Cc: Prabhakar Kushwaha
Subject: Re: [PATCH] driver: net: fsl-mc: Use aligned address for MC FW load
On 11/07/2016
From: Jagan Teki
Rename defconfig files for better compatible with
respective board names and dts files.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
board/engicam/icorem6/MAINTAINERS | 6 ++-
board/engicam/icorem6/README
From: Jagan Teki
Call dev->enetaddr or pdata->enetaddr directly
in eth_ops instead of local mac variable.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Acked-by: Joe Hershberger
Signed-off-by: Jagan Teki
---
drivers/net/fec_mxc.c | 18 ++
1 file changed, 6 inserti
From: Jagan Teki
Boot from MMC:
-
U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44)
Trying to boot from MMC1
U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44 +0530)
CPU: Freescale i.MX6D rev1.2 at 792 MHz
Reset cause: POR
Model: Engicam i.CoreM6 Quad/Dual RQS
From: Jagan Teki
Boot from MMC:
-
U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07)
Trying to boot from MMC1
U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:56:07 +0530)
CPU: Freescale i.MX6DL rev1.3 at 792 MHz
Reset cause: POR
Model: Engicam i.CoreM6 DualLite/Sol
From: Jagan Teki
Boot Log:
U-Boot SPL 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30)
Trying to boot from MMC1
U-Boot 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30 +0530)
CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU: Industrial temperature gra
From: Jagan Teki
Changes for v2:
- Add 'Acked-by' from Joe
- Add new i.CoreM6 RQS patches
Jagan Teki (7):
arm: dts: Add devicetree for i.MX6UL
arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial support
dm: net: fec: Add .read_rom_hwaddr
net: fec: Zap local mac variable
arm: imx6q: Ad
From: Jagan Teki
Add .read_rom_hwaddr on dm eth_ops.
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Acked-by: Joe Hershberger
Signed-off-by: Jagan Teki
---
drivers/net/fec_mxc.c | 32 +---
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/
From: Jagan Teki
Add i.MX6UL dtsi support from Linux.
Here is the last commit:
"ARM: dts: add gpio-ranges property to iMX GPIO controllers"
(sha1: bb728d662bed0fe91b152550e640cb3f6caa972c)
Cc: Stefano Babic
Cc: Matteo Lisi
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
arch/arm/dts/im
On 07/11/2016 22:26, Stephen Warren wrote:
On 11/06/2016 03:24 AM, Alexander Graf wrote:
On 05/11/2016 23:01, Stephen Warren wrote:
On 11/02/2016 03:36 AM, Alexander Graf wrote:
The rpi has a pretty simple way of resetting the whole system. All it
takes
is to poke a few registers at a well
From: Tang Yuantian
Variable sata_curr_device is used to indicate if
there is a available sata disk on board.
Previously, sata_curr_device is set in sata_initialize().
Now, sata_initialize() is separated from other sata commands.
Accordingly, sata_curr_device is removed from sata_initialize() to
The A80, having 2 clusters of 4 cores each, has an ARM CCI-400 hardware
block for cache coherency.
Add the base address for CCI-400, and also add the base address for CPUCFG.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 3 +++
1 file changed, 3 insertions(+)
di
The A80 has a 256 kiB secure SRAM. However the first 4 kiB are reserved
for CPU0 hotplug flags.
Signed-off-by: Chen-Yu Tsai
---
include/configs/sun9i.h | 4
1 file changed, 4 insertions(+)
diff --git a/include/configs/sun9i.h b/include/configs/sun9i.h
index cd9e08d8b1b9..e751c5e05c14 10064
Now that we have a basic version of PSCI firmware, enable non-secure
boot and PSCI on the A80.
Signed-off-by: Chen-Yu Tsai
---
board/sunxi/Kconfig | 4
1 file changed, 4 insertions(+)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index e1d4ab148f08..ae2fba1368cc 100644
--- a/board
The A80 is a big.LITTLE multi-cluster SoC, with a different layout for
the PRCM and CPUCFG registers. As such it needs a different PSCI
implementation.
This patch adds a basic version that allows bringing up the four cores
in the first cluster. The structure is based on existing sunxi PSCI code.
This patch adds the ability to power off cores in the first cluster of
the A80 SoC. Following the single cluster sunxi PSCI implementation,
the core being powered down signals core0 via secure monitor FIQ that
it should be shut down, and enters WFI.
Signed-off-by: Chen-Yu Tsai
---
This does not
The A80 also has the TrustZone Protection Controller (TZPC), called
the Secure Memory Touch Arbiter (SMTA).
Enable non-secure access to all the peripherals at boot time.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/cpu/armv7/sunxi/Makefile | 1 +
arch/arm/cpu/armv7/sunxi/tzpc.c
The A80 has a different PRCM register layout.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/include/asm/arch-sunxi/prcm_sun9i.h | 55
1 file changed, 55 insertions(+)
create mode 100644 arch/arm/include/asm/arch-sunxi/prcm_sun9i.h
diff --git a/arch/arm/include/asm/arch-
The A80 has a 256 kiB secure SRAM. However the first 4 kiB are reserved
for CPU0 hotplug flags.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/include/asm/arch-sunxi/cpu_sun9i.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun9i.h
b/arch/arm/include/asm/arch
The A80 is a big.LITTLE SoC with 4x Cortex-A7 in cluster 0 and 4x
Cortex-A15 in cluster 1.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/cpu/armv7/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index b9c4f4e79b9b..e37f1f328a34 10064
Hi everyone,
This series adds basic PSCI support for the A80 to enable SMP on the
first cluster. This at least allows people to use more than one core.
The term "basic" is used because the series does not add support for
multi-cluster cache and power management.
The PSCI code is based on existing
The A80 has a different CPUCFG register layout, likely due to having
2 clusters.
Signed-off-by: Chen-Yu Tsai
---
arch/arm/include/asm/arch-sunxi/cpucfg_sun9i.h | 51 ++
1 file changed, 51 insertions(+)
create mode 100644 arch/arm/include/asm/arch-sunxi/cpucfg_sun9i.h
di
Crap! I thought I spotted it but wasn't sure :)
If there needs to be a v2 i'll fix it; if the v1 is accepted, Joe could
hopefully fix that in the message *wink* :)
Olliver
On 09-11-16 00:17, Emilio López wrote:
Small nitpick:
El 08/11/16 a las 13:38, Olliver Schinagl escribió:
All inter
On Wed, Nov 9, 2016 at 6:38 PM, Hans de Goede wrote:
> Hi,
>
> On 09-11-16 11:21, Chen-Yu Tsai wrote:
>>
>> Hi everyone,
>>
>> This series adds basic PSCI support for the A80 to enable SMP on the
>> first cluster. This at least allows people to use more than one core.
>> The term "basic" is used b
Hi,
On 09-11-16 11:21, Chen-Yu Tsai wrote:
Hi everyone,
This series adds basic PSCI support for the A80 to enable SMP on the
first cluster. This at least allows people to use more than one core.
The term "basic" is used because the series does not add support for
multi-cluster cache and power m
On 7.11.2016 18:31, Joe Hershberger wrote:
> Hi Michal,
>
> https://patchwork.ozlabs.org/patch/690374/ was applied to u-boot-net.git.
Thanks,
Michal
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Offset 0x1 in the generated kwb image file is a set of flags, bit 0
enables debug output from the BootROM firmware. Allow a DEBUG option in
the kwb configuration to request debug output from the BootROM firmware.
Signed-off-by: Chris Packham
---
tools/kwbimage.c | 9 +
tools/kwbimage.h
Hi,
On 03/11/16 09:38, Andre Przywara wrote:
> Hi,
>
> On 03/11/16 08:49, Alexander Graf wrote:
>> On 11/03/2016 02:36 AM, Andre Przywara wrote:
>>> Hi,
>>>
>>> this is my first take on the SPL support for the Allwinner A64 SoC.
>>> The actual meat - the DRAM initialization code - has been provid
Offset 0x18 in some Marvell datasheets this field is redacted as
"reserved". This offset is actually a set of options and bits 2:0 allow
the selection of the UART baudrate.
Allow a BAUDRATE option to set the UART baudrate for any messages coming
from the BootROM firmware.
Signed-off-by: Chris Pac
From: Andrew Duda
checksum_algo's pad_len field isn't actually used to store the length of
the padding but the total length of the RSA key (msg_len + pad_len)
Signed-off-by: Andrew Duda
Signed-off-by: aduda
---
include/image.h | 2 +-
lib/rsa/rsa-verify.c | 6 +++---
2 files changed, 4
51 matches
Mail list logo