Re: [U-Boot] [PATCH] net: zynq_gem: Fix masking of supported phydev features

On 6.3.2017 23:13, Joe Hershberger wrote: > On Sun, Mar 5, 2017 at 8:36 AM, Nathan Rossi wrote: >> When the zynq_gem driver initializes the phy it sets the supported >> features that the phy can support and advertise. However instead of >> masking the supported features

Re: [U-Boot] [PATCH 1/5] mtd: nand: add initialization flag

Hi Prabhakar, Thanks for your comments! > -Original Message- > From: Prabhakar Kushwaha > Sent: Tuesday, March 07, 2017 11:17 AM > To: Z.Q. Hou ; u-boot@lists.denx.de; > o...@buserror.net; york sun ; > mingkai...@freescale.com; s...@chromium.org;

Re: [U-Boot] rockchip breakage with "spl: Remove overwrite of relocated malloc limit"

Hi Heiko, That patch break all the Rockchip SoCs SPL which using spl_init(). Eddie send one patch for rk3288 by add a spl_early_init(), which is under review, I also look forward for better solution. Thanks, - Kever On 03/07/2017 08:42 AM, Heiko Stübner wrote: Hi, I just realized patch

Re: [U-Boot] [RESEND PATCH v4] usb: dwc2: add support for external vbus supply

Hi Marek, On 03/07/2017 10:55 AM, Marek Vasut wrote: On 03/06/2017 01:54 PM, Kever Yang wrote: Some board do not use the dwc2 internal VBUS_DRV signal, but use a gpio pin to enable the 5.0V VBUS power, add interface to enable the power in dwc2 driver. Signed-off-by: Kever Yang

Re: [U-Boot] [PATCH v5 09/11] armv8: ls2080a: Drop early MMU for SPL build

On 03/07/2017 05:31 AM, york sun wrote: On 03/06/2017 07:59 PM, Marek Vasut wrote: On 03/06/2017 06:02 PM, York Sun wrote: Early MMU improves performance especially on emulators. However, the early MMU is left enabled after the first stage of SPL boot. Instead of flushing D-cache and dealing

[U-Boot] [PATCH][v2]board: freescale: ls2080a/ls2088a: Enable PPA

Enable PPA on LS2080A, LS2088A boards: -LS2080ARDB, LS2080AQDS -LS2088ARDB, LS2088AQDS Signed-off-by: Santan Kumar Signed-off-by: Abhimanyu Saini Signed-off-by: Priyanka Jain --- Changes for v2: Changed the subject Made

[U-Boot] rockchip: config: enable the USB host for rk3288 based board

RK3288 using the dwc2 USB host controller, enable it and other usb host funtion like storage and ethernet. Signed-off-by: Eddie Cai --- configs/fennec-rk3288_defconfig | 3 +++ configs/firefly-rk3288_defconfig | 3 +++ configs/tinker-rk3288_defconfig | 3 +++ 3

[U-Boot] rockchip: dts: tinker: add usb host power supply node

Tinker board have a usb host. add dts node to provide power supply. Signed-off-by: Eddie Cai --- arch/arm/dts/rk3288-tinker.dts | 11 +++ arch/arm/dts/rk3288-tinker.dtsi | 12 2 files changed, 23 insertions(+) diff --git

Re: [U-Boot] [PATCH v5 09/11] armv8: ls2080a: Drop early MMU for SPL build

On 03/06/2017 07:59 PM, Marek Vasut wrote: > On 03/06/2017 06:02 PM, York Sun wrote: >> Early MMU improves performance especially on emulators. However, the >> early MMU is left enabled after the first stage of SPL boot. Instead >> of flushing D-cache and dealing with re-enabling MMU for the

Re: [U-Boot] [PATCH 08/20] arm: socfpga: add system manager for Arria 10

On 03/06/2017 08:39 AM, Ley Foon Tan wrote: On Sab, 2017-02-25 at 22:36 +0100, Marek Vasut wrote: On 02/22/2017 10:47 AM, Ley Foon Tan wrote: Add system manager support for Arria 10. But these are just headers, there's no system manager code here ? Yes. Mainly for system manager's register

Re: [U-Boot] [PATCH 07/20] arm: socfpga: add clock driver for Arria 10

On 03/06/2017 08:10 AM, Ley Foon Tan wrote: On Sab, 2017-02-25 at 22:35 +0100, Marek Vasut wrote: On 02/22/2017 10:47 AM, Ley Foon Tan wrote: Add clock driver support for Arria 10 and update Gen5 clock driver. Signed-off-by: Tien Fong Chee Signed-off-by: Ley Foon

Re: [U-Boot] [PATCH v3] arm: socfpga: fix issue with warm reset when CSEL is 0

On 03/06/2017 03:25 AM, Dalon Westergreen wrote: On Sun, 2017-03-05 at 18:49 +0100, Marek Vasut wrote: On 03/05/2017 06:38 PM, Dalon Westergreen wrote: On Tue, 2017-02-28 at 06:45 -0800, Dalon Westergreen wrote: On Mon, 2017-02-20 at 06:35 -0800, Dalon Westergreen wrote: On Mon,

Re: [U-Boot] [PATCH 10/20] arm: socfpga: add misc support for Arria 10

On 03/06/2017 09:00 AM, Ley Foon Tan wrote: On Sab, 2017-02-25 at 22:40 +0100, Marek Vasut wrote: On 02/22/2017 10:47 AM, Ley Foon Tan wrote: Add misc support for Arria 10 and minor fix on misc Gen5. Signed-off-by: Tien Fong Chee Signed-off-by: Ley Foon Tan

Re: [U-Boot] [PATCH v5 09/11] armv8: ls2080a: Drop early MMU for SPL build

On 03/06/2017 06:02 PM, York Sun wrote: Early MMU improves performance especially on emulators. However, the early MMU is left enabled after the first stage of SPL boot. Instead of flushing D-cache and dealing with re-enabling MMU for the second stage U-Boot, disabling it for SPL build

Re: [U-Boot] [RESEND PATCH v4] usb: dwc2: add support for external vbus supply

On 03/06/2017 01:54 PM, Kever Yang wrote: Some board do not use the dwc2 internal VBUS_DRV signal, but use a gpio pin to enable the 5.0V VBUS power, add interface to enable the power in dwc2 driver. Signed-off-by: Kever Yang Signed-off-by: Simon Glass

Re: [U-Boot] [PATCH 1/4] arm: socfpga: Removing unused passing parameter of socfpga_bridges_reset

On 03/06/2017 05:45 AM, Chee, Tien Fong wrote: On Ahd, 2017-03-05 at 01:57 +0100, Marek Vasut wrote: On 03/03/2017 01:50 PM, Chee Tien Fong wrote: From: Tien Fong Chee This patch removes the unused passing parameter of socfpga_bridges_reset function in Arria10.

Re: [U-Boot] [PATCH v3] usb: dwc2: add support for external vbus supply

On 03/06/2017 01:36 PM, Kever Yang wrote: Hi Simon, On 12/04/2016 02:27 AM, Simon Glass wrote: Hi Marek, Kever, On 3 December 2016 at 06:15, Marek Vasut wrote: On 12/03/2016 05:29 AM, Simon Glass wrote: From: Kever Yang Some board do not use the

Re: [U-Boot] [ PATCH] ARM: cache: runtime flag to suppress the "cache misaligned" message

On 03/06/2017 11:21 PM, Steve Rae wrote: The "chunks" in the "fastboot sparse image" are not aligned, resulting in many "cached misaligned" messages from check_cache_range(). Implement a runtime flag to suppress this message, and use this flag when processing the "fastboot sparse image". Let

Re: [U-Boot] [PATCH 2/2] arm: socfpga: Enable part command and EFI partition support for DE0-nano-SoC

On 03/05/2017 07:37 PM, Frank Kunz wrote: Am 05.03.2017 um 18:17 schrieb Marek Vasut: On 03/05/2017 01:54 PM, Frank Kunz wrote: Those features are used by distro boot with efi boot. Signed-off-by: Frank Kunz --- :100644 100644 b122135690... c22b54b48d... M

Re: [U-Boot] [PATCH 2/5] mtd: nand: remove nand size print from nand_init function

> -Original Message- > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Zhiqiang > Hou > Sent: Friday, March 03, 2017 7:01 PM > To: u-boot@lists.denx.de; o...@buserror.net; york sun ; > mingkai...@freescale.com; s...@chromium.org; Xiaobo Xie >

Re: [U-Boot] [PATCH 1/5] mtd: nand: add initialization flag

> -Original Message- > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Zhiqiang > Hou > Sent: Friday, March 03, 2017 7:01 PM > To: u-boot@lists.denx.de; o...@buserror.net; york sun ; > mingkai...@freescale.com; s...@chromium.org; Xiaobo Xie >

Re: [U-Boot] [PATCH 15/20] drivers: Makefile: include fpga build in SPL

On Isn, 2017-02-27 at 17:06 +0100, Michal Simek wrote: > On 25.2.2017 22:44, Marek Vasut wrote: > > > > On 02/22/2017 10:47 AM, Ley Foon Tan wrote: > > > > > > Arria 10 SPL needs the drivers/fpga. > > > > > > Signed-off-by: Tien Fong Chee > > > Signed-off-by: Ley Foon

Re: [U-Boot] [PATCH 14/20] arm: socfpga: add SPL support for Arria 10

On Sab, 2017-02-25 at 22:43 +0100, Marek Vasut wrote: > On 02/22/2017 10:47 AM, Ley Foon Tan wrote: > > > > Add SPL support for Arria 10. > > > > Signed-off-by: Tien Fong Chee > > Signed-off-by: Ley Foon Tan > > --- > >  

Re: [U-Boot] [PATCH 1/1] arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD

On Tue, Mar 07, 2017 at 03:02:05AM +0200, Siarhei Siamashka wrote: > On Mon, 6 Mar 2017 17:54:17 -0500 > Tom Rini wrote: > > > On Tue, Mar 07, 2017 at 12:44:59AM +0200, Siarhei Siamashka wrote: > > > Hi Tom, > > > > > > On Mon, 6 Mar 2017 13:50:10 -0500 > > > Tom Rini

Re: [U-Boot] [PATCH 1/1] arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD

On Mon, 6 Mar 2017 17:54:17 -0500 Tom Rini wrote: > On Tue, Mar 07, 2017 at 12:44:59AM +0200, Siarhei Siamashka wrote: > > Hi Tom, > > > > On Mon, 6 Mar 2017 13:50:10 -0500 > > Tom Rini wrote: > > > > > Today, we have cases where we wish to build all

Re: [U-Boot] STM32F429 u-boot

Hi Bruno, Your email did reach the mailing list, it's just looks like, unfortunately, nobody can help you with this at the moment. Try Cc'ing or directly emailing somebody who works on U-Boot for STM32 SoCs, I definitely saw some patches recently. On Sun, Mar 5, 2017 at 11:21 PM, bruno

[U-Boot] rockchip breakage with "spl: Remove overwrite of relocated malloc limit"

Hi, I just realized patch b3d2861eb20a ("spl: Remove overwrite of relocated malloc limit") introduces breakage in my rk3188 uboot code (and should most likely also affect the very similar other rockchip spl boards). The boards call spl_init in their board_init_f functions because they need the

Re: [U-Boot] [RFC] odroid: Add support for the ODROID-X board variant

Hello, On Fri, 23 Oct 2015 19:53:28 +0900 Minkyu Kang wrote: > Dear Siarhei Siamashka, > > On 20/10/15 08:39, Siarhei Siamashka wrote: > > ODROID-X uses a slightly older revision of the same base board > > as the ODROID-X2. But the CPU module in ODROID-X uses an older > >

Re: [U-Boot] sdhci_transfer_data: Error detected in status(0x208002) problem on Tiny4412 board

On Fri, 3 Mar 2017 15:29:35 -0700 (MST) xiaojimmychen <807065...@qq.com> wrote: > Hello everyone! > > I am working with my Tiny4412 board, and the u-boot version is U-Boot > 2016.11. After burning the u-boot to sd card, and boot my board from it. > There are some error ouput to the console. It

Re: [U-Boot] [PATCH 1/1] arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD

On Tue, Mar 07, 2017 at 12:44:59AM +0200, Siarhei Siamashka wrote: > Hi Tom, > > On Mon, 6 Mar 2017 13:50:10 -0500 > Tom Rini wrote: > > > Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for > > various reasons. We also have cases where we only

Re: [U-Boot] [PATCH 1/2] arm: omap3: Compile clock.c with -marm option to unbreak OMAP3530

On Mon, Mar 06, 2017 at 03:16:52AM +0200, Siarhei Siamashka wrote: > Boards with OMAP3530 SoC fail to boot since commit bd2c4522c26d5 > ("ti: armv7: enable EXT support in SPL (using ti_armv7_common.h)") > because it enabled the use of Thumb2 for the SPL. > > Experiments have shown that the

Re: [U-Boot] [PATCH 1/1] arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD

Hi Tom, On Mon, 6 Mar 2017 13:50:10 -0500 Tom Rini wrote: > Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for > various reasons. We also have cases where we only build SPL in Thumb2 mode > due > to size constraints and wish to build the rest of

[U-Boot] [ PATCH] ARM: cache: runtime flag to suppress the "cache misaligned" message

The "chunks" in the "fastboot sparse image" are not aligned, resulting in many "cached misaligned" messages from check_cache_range(). Implement a runtime flag to suppress this message, and use this flag when processing the "fastboot sparse image". Signed-off-by: Steve Rae

Re: [U-Boot] arm: cache: misaligned operation with fastboot

On Fri, Mar 3, 2017 at 9:27 AM, Gary Bisson wrote: > Hi Steve, > > On Fri, Mar 3, 2017 at 12:03 AM, Steve Rae > wrote: > > > > Hi Gary, > > > > On Thu, Mar 2, 2017 at 3:12 AM, Lukasz Majewski wrote: > >> > >> Hi, > >> >

Re: [U-Boot] [PATCH] net: zynq_gem: Fix masking of supported phydev features

On Sun, Mar 5, 2017 at 8:36 AM, Nathan Rossi wrote: > When the zynq_gem driver initializes the phy it sets the supported > features that the phy can support and advertise. However instead of > masking the supported features such that it limits the available > features it

Re: [U-Boot] [PATCH v5 06/11] driver: net: fsl-mc: Update calculation of MC RAM

On Mon, Mar 6, 2017 at 11:02 AM, York Sun wrote: > Since the reserved RAM is tracked by gd->arch.resv_ram, calculation > of MC memory blocks can be simplified. The MC RAM is guaranteed to be > aligned by the reservation process. > > Signed-off-by: York Sun >

Re: [U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after free()

On Tue, Feb 21, 2017 at 1:47 AM, Ashish Kumar wrote: > Hello Joe, > > Please see inline. > > Regards > Ashish > > -Original Message- > From: Joe Hershberger [mailto:joe.hershber...@gmail.com] > Sent: Thursday, February 16, 2017 5:22 AM > To: Ashish Kumar

[U-Boot] [PATCH] tools: binman: change shebang from python into python2

This tool does not work with Python 3. Change the shebang to make sure the script is run by a Python 2 interpreter. Signed-off-by: Jörg Krause --- tools/binman/binman.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/binman/binman.py

[U-Boot] [PATCH] ARM: uniphier: set DRAM_SPARSE flag for LD21 boards

Commit 04cd4e7215d3 ("ARM: uniphier: remove DRAM base address from board parameters") accidentally unset the DRAM_SPARSE flag, and changed the physical map of the DRAM channels. Revive the original behavior. Fixes: 04cd4e7215d3 ("ARM: uniphier: remove DRAM base address from board parameters")

Re: [U-Boot] [PATCH v2] driver: net: ldpaa: Update priv->phydev after free()

Hello Joe, Could you please ack if there are no further queries. Regards Ashish -Original Message- From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Ashish Kumar Sent: Tuesday, February 21, 2017 1:17 PM To: Joe Hershberger Cc: u-boot

[U-Boot] [PATCH 1/1] arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD

Today, we have cases where we wish to build all of U-Boot in Thumb2 mode for various reasons. We also have cases where we only build SPL in Thumb2 mode due to size constraints and wish to build the rest of the system in ARM mode. So in this migration we introduce a new symbol as well,

[U-Boot] [PATCH v5 08/11] armv8: layerscape: Fix the sequence of changing MMU table

This patch follows the break-before-make process when making changes to MMU table. MMU is disabled before changing TTBR to avoid any potential race condition. Signed-off-by: York Sun --- Changes in v5: None Changes in v4: Revert the change of C bit in v3 patch. Changes in

[U-Boot] [PATCH v5 11/11] armv8: layerscape: Update early MMU for DDR after initialization

In early MMU table, DDR has to be mapped as device memory to avoid speculative access. After DDR is initialized, it needs to be updated to normal memory to allow code execution. To simplify the code, dram_init() is moved into a common file as a weak function. Signed-off-by: York Sun

[U-Boot] [PATCH v5 10/11] armv8: mmu: Add a function to change mapping attributes

Function mmu_change_region_attr() is added to change existing mapping with updated PXN, UXN and memory type. This is a break-before-make process during which the mapping becomes fault (invalid) before final attributres are set. Signed-off-by: York Sun --- Changes in v5: None

[U-Boot] [PATCH v5 05/11] armv8: layerscape: Rewrite memory reservation

For ARMv8 Layerscape SoCs, secure memory and MC memorey are reserved at the end of DDR. DDR is spit into two or three banks. This patch reverts commit aabd7ddb and simplifies the calculation of reserved memory, and moves the code into common SoC file. Secure memory is carved out first. DDR bank

[U-Boot] [PATCH v5 09/11] armv8: ls2080a: Drop early MMU for SPL build

Early MMU improves performance especially on emulators. However, the early MMU is left enabled after the first stage of SPL boot. Instead of flushing D-cache and dealing with re-enabling MMU for the second stage U-Boot, disabling it for SPL build simplifies the process. The performance penalty is

[U-Boot] [PATCH v5 02/11] armv8: ls2080a: Move CONFIG_FSL_MC_ENET to Kconfig

Use Kconfig option instead of config macro in header file. Clean up existing usage. Signed-off-by: York Sun --- Changes in v5: Rename RESV_RAM_TOP to RESV_RAM. Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 8

[U-Boot] [PATCH v5 06/11] driver: net: fsl-mc: Update calculation of MC RAM

Since the reserved RAM is tracked by gd->arch.resv_ram, calculation of MC memory blocks can be simplified. The MC RAM is guaranteed to be aligned by the reservation process. Signed-off-by: York Sun CC: Priyanka Jain --- Changes in v5: None Changes in

[U-Boot] [PATCH v5 03/11] armv8: ls2080a: Move CONFIG_SYS_MC_RSV_MEM_ALIGN to Kconfig

Use Kconfig option instead of config macro in header file. Signed-off-by: York Sun --- Changes in v5: Rename RESV_RAM_TOP to RESV_RAM. Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 8

[U-Boot] [PATCH v5 07/11] armv8: layerscape: Update MMU mapping with actual DDR size

Update mapping with actual DDR size. Non-existing memory should not be mapped as "normal" memory to avoid speculative access. Signed-off-by: York Sun --- Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/cpu/armv8/fsl-layerscape/cpu.c |

[U-Boot] [PATCH v5 04/11] efi: Add a hook to allow adding memory mapping

Instead of adding all memory banks, add a hook so individual SoC/board can has its own implementation. Signed-off-by: York Sun CC: Alexander Graf Reviewed-by: Alexander Graf --- Changes in v5: None Changes in v4: None Changes in v3: None

[U-Boot] [PATCH v5 01/11] armv8: Add global variable resv_ram

Use gd->arch.resv_ram to track reserved memory allocation. Signed-off-by: York Sun --- Changes in v5: Rename RESV_RAM_TOP to RESV_RAM in Kconfig Revise "help" message and add comment to explain how RESV_RAM is used. Changes in v4: None Changes in v3: None Changes in v2:

Re: [U-Boot] [linux-sunxi] Re: [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support

On Mon, Mar 06, 2017 at 03:11:29PM +, Andre Przywara wrote: > Hi, > > On 06/03/17 10:00, Maxime Ripard wrote: > > On Fri, Mar 03, 2017 at 09:55:25AM +, Andre Przywara wrote: > >> Hi, > >> > >> On 03/03/17 09:22, Maxime Ripard wrote: > >>> On Thu, Mar 02, 2017 at 12:03:20AM +0800, Icenowy

Re: [U-Boot] [linux-sunxi] Re: [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support

Hi, On 06/03/17 10:00, Maxime Ripard wrote: > On Fri, Mar 03, 2017 at 09:55:25AM +, Andre Przywara wrote: >> Hi, >> >> On 03/03/17 09:22, Maxime Ripard wrote: >>> On Thu, Mar 02, 2017 at 12:03:20AM +0800, Icenowy Zheng wrote: 2017年3月1日 23:51于 Maxime Ripard

[U-Boot] [RESEND PATCH v4] usb: dwc2: add support for external vbus supply

Some board do not use the dwc2 internal VBUS_DRV signal, but use a gpio pin to enable the 5.0V VBUS power, add interface to enable the power in dwc2 driver. Signed-off-by: Kever Yang Signed-off-by: Simon Glass --- Changes in v4: - Drop no use code

[U-Boot] [PATCH v2] arm: OMAP2+: nandecc: propagate error to command return status

Currently nandecc returns zero even if underlaying omap_nand_switch_ecc function fails. Fix that by propagating error returned to command return value. Signed-off-by: Ladislav Michl --- Changes: - v2: Add changelog text. arch/arm/include/asm/arch-am33xx/sys_proto.h | 2

Re: [U-Boot] [PATCH v3] usb: dwc2: add support for external vbus supply

Hi Simon, On 12/04/2016 02:27 AM, Simon Glass wrote: Hi Marek, Kever, On 3 December 2016 at 06:15, Marek Vasut wrote: On 12/03/2016 05:29 AM, Simon Glass wrote: From: Kever Yang Some board do not use the dwc2 internal VBUS_DRV signal, but use a

[U-Boot] [PATCH] rockchip: rk3036: dts: bind usb vbus-supply source

Bind usb host and otg vbus to its source. Signed-off-by: Kever Yang --- arch/arm/dts/rk3036-sdk.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/dts/rk3036-sdk.dts b/arch/arm/dts/rk3036-sdk.dts index bdc7b98..6754625 100644 ---

[U-Boot] [PATCH v4] usb: dwc2: add support for external vbus supply

Some board do not use the dwc2 internal VBUS_DRV signal, but use a gpio pin to enable the 5.0V VBUS power, add interface to enable the power in dwc2 driver. Signed-off-by: Kever Yang Signed-off-by: Simon Glass --- Changes in v4: - Drop no use code

Re: [U-Boot] [PATCH] sunxi: Add defconfig for Allwinner A23 EVB

On 16/02/2017 19:32, Maxime Ripard wrote: > On Thu, Feb 16, 2017 at 11:46:42AM +0100, Florent Jacquet wrote: >> This enables the support for the Allwinner A23 Evaluation Board (EVB), >> that already had a device tree (from Linux) but no defconfig. >> >> This board has an AXP223 PMIC, some NAND,

[U-Boot] [PATCH v1] x86: Remove unused option

There is option which is not used: CONFIG_ZBOOT_32 Remove it from default x86 config and from whitelist. Signed-off-by: Andy Shevchenko --- include/configs/x86-common.h | 1 - scripts/config_whitelist.txt | 1 - 2 files changed, 2 deletions(-) diff

Re: [U-Boot] [PATCH 00/17] SPL: extend FIT loading support

Hi Andre, I have test this patch set on rk3399 with ATF support. For patch 2~5, you can add: Tested-by: Kever Yang Thanks, - Kever On 03/01/2017 10:25 AM, Andre Przywara wrote: This is an updated and slightly extended version of the SPL FIT loading series I

[U-Boot] [PATCH v2] regmap: add support for address cell 2

ARM64 is using 64bit address which address cell is 2 instead of 1, update to support it when of-platdata enabled. Signed-off-by: Kever Yang --- drivers/core/regmap.c | 20 ++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git

Re: [U-Boot] Ethernet not detecting on Odroid u3

x.de/pipermail/u-boot/2015-October/231061.html Basically, a voltage regulator is not getting initialized because a call to the board_usb_init() function was lost during the DM conversion. You can try to compile U-Boot from my branch, it contains the rebased fixes which I have been using al

Re: [U-Boot] [linux-sunxi] Re: [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support

On Fri, Mar 03, 2017 at 09:55:25AM +, Andre Przywara wrote: > Hi, > > On 03/03/17 09:22, Maxime Ripard wrote: > > On Thu, Mar 02, 2017 at 12:03:20AM +0800, Icenowy Zheng wrote: > >> > >> 2017年3月1日 23:51于 Maxime Ripard 写道： > >>> > >>> Hi Andre, > >>> > >>> On

Re: [U-Boot] [RFC PATCH] kbuild: turn of dtc unit address warnings by default

On Mon, Feb 27, 2017 at 2:24 PM, Masahiro Yamada wrote: > DTC 1.4.2 or later checks DT unit-address without reg property and > vice-versa, and generates lots of warnings. Fixing DT files will > take for a while. Until then, let's turn off the check unless >

Re: [U-Boot] [PATCH] ARM: keystone: Pass SPI MTD partition table via kernel command line

Hi, On Saturday 04 March 2017 10:39 PM, Tom Rini wrote: > On Sat, Mar 04, 2017 at 06:17:30PM +0530, Vignesh R wrote: > >> SPI U-Boot image for K2 boards have now exceeded 512K partition >> allocated to it and no longer fit the partitions defined in kernel DTS >> file. Therefore, pass an updated

[U-Boot] STi U-boot git tree request

Hi Tom As kernel maintainer of STi machine (STMicroelectronics STiH407 family SoC), i am currently adding STiH407 support on U-boot (https://www.mail-archive.com/u-boot@lists.denx.de/msg239825.html). I am wondering if i need to get a custodian git tree for this machine in order to do

Re: [U-Boot] [PATCH v3 0/9] sunxi: DM-based CLK, RESET and PINCTRL

Andre, > On 06 Mar 2017, at 03:08, André Przywara wrote: > > On 01/03/17 21:19, Philipp Tomsich wrote: >> Hi everyone, >> >> here's the the new version of CLK, RESET and PINCTRL drivers to >> configure sunxi from the device-tree. This adds support for the >> upstream

Re: [U-Boot] [PATCH] regmap: add support for address cell 2

Hi Simon, On 02/17/2017 04:43 AM, Simon Glass wrote: Hi Kever, On 13 February 2017 at 01:28, Kever Yang wrote: ARM64 is using 64bit address which address cell is 2 instead of 1, update to support it when of-platdata enabled. Signed-off-by: Kever Yang

Re: [U-Boot] STM32F429 u-boot

Anyway I can ask this on the list ? My message is still awaiting moderation or fell in the spam folder... > Hi all, > > I am bringing up u-boot on a new custom board with STM32F429 cpu. To start, I modified the stm32f429 discovery board files by adding the proper gpio, size and address for the

[U-Boot] [PATCHv2 1/3] Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs

In some cases this is absolutely required, so select this for some secure features. This also requires migration of RSA_FREESCALE_EXP Cc: Ruchika Gupta Cc: Poonam Aggrwal Cc: Naveen Burmi Cc: Po Liu

Re: [U-Boot] [PATCH 0/8] Stop AXP from crashing when enabeling LDO3

Hey Jagan, FYI, I used the wrong e-mail address, I think it is still listed in some of the u-boot sources. Olliver On 01-03-17 15:06, Olliver Schinagl wrote: Hey Maxime, Jagan, On 01-03-17 14:00, Maxime Ripard wrote: Hi Oliver, On Wed, Mar 01, 2017 at 01:52:16PM +0100, Olliver Schinagl

Re: [U-Boot] [PATCH 0/8] Stop AXP from crashing when enabeling LDO3

Hey Maxime, Jagan, On 01-03-17 14:00, Maxime Ripard wrote: Hi Oliver, On Wed, Mar 01, 2017 at 01:52:16PM +0100, Olliver Schinagl wrote: Hi list, When powering up an AXP209, the default value for LDO3 output is enabled. This works fine. However if for whatever reason, LDO3 is disabled, for

Re: [U-Boot] [linux-sunxi] [PATCH 6/8] power: axp209: Add support for voltage rate control on LDO3

Hey Marcus, On 01-03-17 16:10, Marcus Weseloh wrote: Hi Oliver, 2017-03-01 13:52 GMT+01:00 Olliver Schinagl >: +#define AXP209_VRC_LDO3_EN BIT(3) +#define AXP209_VRC_DCDC2_ENBIT(2) +#define

Re: [U-Boot] [PATCH 0/8] Stop AXP from crashing when enabeling LDO3

Hey Maxime, On 01-03-17 14:00, Maxime Ripard wrote: Hi Oliver, On Wed, Mar 01, 2017 at 01:52:16PM +0100, Olliver Schinagl wrote: Hi list, When powering up an AXP209, the default value for LDO3 output is enabled. This works fine. However if for whatever reason, LDO3 is disabled, for example

[U-Boot] STM32F429 u-boot

Hi all, I am bringing up u-boot on a new custom board with STM32F429 cpu. To start, I modified the stm32f429 discovery board files by adding the proper gpio, size and address for the external DRAM, also the dram timings and USART gpio pins used I use the "bare" gcc 5.4 toolchain from ARM from

[U-Boot] [PATCH v3 00/11] Rewrite ARMv8 layerscape MMU

A recent debug revealed MMU for DDR shouldn't be enabled before DDR is initialized. Otherwise, a "normal memory" mapping may cause speculative access which may hang the system if accessing to DDR is not allowed at time. For Layerscape platforms, we have early MMU setup to speed up execution on

Re: [U-Boot] [PATCH] drivers: net: phy: atheros: apply the previous register setting for AR8031 to fix the voltage peak issue

On Wed, Feb 8, 2017 at 5:35 PM, Yung-Ching LIN wrote: > On Wed, Feb 8, 2017 at 10:47 AM, Joe Hershberger > wrote: >> On Wed, Feb 8, 2017 at 12:26 AM, Sekhar Nori wrote: >>> On Wednesday 08 February 2017 12:36 AM, Yung-Ching LIN

[U-Boot] sdhci_transfer_data: Error detected in status(0x208002) problem on Tiny4412 board

Hello everyone! I am working with my Tiny4412 board, and the u-boot version is U-Boot 2016.11. After burning the u-boot to sd card, and boot my board from it. There are some error ouput to the console. It seems like that my sd card doesn't initialize completely. I have enabled the MMC Debug

Re: [U-Boot] [linux-sunxi] [PATCH 6/8] power: axp209: Add support for voltage rate control on LDO3

Hi Oliver, 2017-03-01 13:52 GMT+01:00 Olliver Schinagl : > +#define AXP209_VRC_LDO3_EN BIT(3) > +#define AXP209_VRC_DCDC2_ENBIT(2) > +#define AXP209_VRC_LDO3_800uV_uS (BIT(1) | AXP209_VRC_LDO3_EN) > +#define AXP209_VRC_LDO3_1600uV_uS

[U-Boot] [PATCH v2 2/2] at91: video: DT binding for HLCDC driver

DT binding documentation for atmel HLCDC driver. Signed-off-by: Songjun Wu --- Changes in v2: None doc/device-tree-bindings/video/atme-hlcdc.txt | 38 +++ 1 file changed, 38 insertions(+) create mode 100644

[U-Boot] [PATCH v2 1/2] at91: video: Support driver-model for the HLCD driver

Add driver-model support to this driver. Signed-off-by: Songjun Wu --- Changes in v2: - Due to the peripheral clock driver improvement, remove the unneccessary clock calling. board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +

[U-Boot] [PATCH v2 0/2] at91: video: add driver for Atmel HLCD controller

The i2c driver includes two parts. 1) Driver code to implement the HLCD function. 2) Device tree binding documentation, it describes how to add the HLCD in device tree. Changes in v2: - Due to the peripheral clock driver improvement, remove the unneccessary clock calling. Songjun Wu (2):

Re: [U-Boot] [PATCH v3 4/8] armv8: Add workaround for USB erratum A-009007

OK York, will send new patch.. > -Original Message- > From: york sun > Sent: Tuesday, February 28, 2017 9:56 PM > To: Suresh Gupta > Cc: u-boot@lists.denx.de; Scott Wood ; Leo Li > ; Sriram Dash ; Rajesh

Re: [U-Boot] Complete verified uboot example

Hello, Here is a list of things I have tried: The raw zImage (which is compressed with XZ), various addresses from indeed load address 0x2300, entry at 0x23008000 (and the same), I've tried setting the FTD address since it sets itself neatly at 0x22f and change, which will probably get

Re: [U-Boot] Complete verified uboot example

Hello, Still for some reason - there is an issue with booting from the FIT. With a version of Uboot without the FIT related CONFIGs enabled; everything works. Here is me taking my zImage and converting it to a u-image ( I am not sure on the addresses) mkimage -A arm -O linux -C none -T kernel

[U-Boot] U-boot FIT Signature

Hi Markus, Hi Maria, On Mon, 2017-02-20 at 12:33 +0100, Maria Sepulveda wrote: The reason to store the public key on an external device is to verify that it is our hardware. Do you want to verify it is your hardware or do you want to verify the Software is the one you designated to run on

Re: [U-Boot] [PATCH v3 4/8] armv8: Add workaround for USB erratum A-009007

> -Original Message- > From: york sun > Sent: Friday, February 24, 2017 10:31 PM > To: Suresh Gupta > Cc: u-boot@lists.denx.de; Scott Wood ; Leo Li > ; Sriram Dash ; Rajesh Bhagat >

Re: [U-Boot] Complete verified uboot example

Looks like far more progress: #> setenv my_bootcount 0; bootm 0xD0084000 Initial value for argc=3 Final value for argc=3 ## Current stack ends at 0x23f11db8 * kernel: cmdline image address = 0xd0084000 Reading image header from dataflash address d0084000 to RAM address 2200 FIT/FDT

Re: [U-Boot] Complete verified uboot example

Okay - it seems, after working my way through a bunch of the documentation and examples in /doc/uImage.FIT - I noticed a discrepancy /dts-v1/; /{ description = "Configuration to load a Basic Kernel"; #address-cells = <1>; images { linux_kernel@1 { description = "Linux zImage"; data =

[U-Boot] [PATCH v2] board: ns2: Add support for Broadcom Northstar 2

Add support for the Broadcom Northstar2 SoC and SVK (bcm958712k). The BCM5871X is a series of quad-core 64-bit 2GHz ARMv8 Cortex-A57 processors targeting a broad range of networking applications. Signed-off-by: Jon Mason --- arch/arm/Kconfig | 9

Re: [U-Boot] [PATCH v2 02/13] sunxi: Add initial support for R40

On Mon, Mar 06, 2017 at 04:05:07PM +0800, Chen-Yu Tsai wrote: > The R40 is the successor to the A20. It is a hybrid of the A20, A33 > and the H3. > > The R40's PIO controller is compatible with the A20, > Reuse the A20 UART and I2C muxing code by adding the R40's macro. > > The display pipeline

Re: [U-Boot] [PATCH v2 01/13] sunxi: Split up long Kconfig lines

On Mon, Mar 06, 2017 at 04:05:06PM +0800, Chen-Yu Tsai wrote: > Currently we have some lines in board/sunxi/Kconfig that are very long. > These line either provide default values for a set of SoCs, or limit > some option to a subset of sunxi SoCs. > > Fortunately Kconfig makes it easy to split

Re: [U-Boot] [PATCH 11/20] arm: socfpga: add pinmux for Arria 10

On Sab, 2017-02-25 at 22:41 +0100, Marek Vasut wrote: > On 02/22/2017 10:47 AM, Ley Foon Tan wrote: > > > > Add pinmux support for Arria 10. > > > > Signed-off-by: Tien Fong Chee > > Signed-off-by: Ley Foon Tan > > --- > >  

[U-Boot] [PATCH v2 09/13] sunxi: Use H3/A64 DRAM initialization code for R40

The R40 seems to have a variant of the memory controller found in the H3 and A64 SoCs. Adapt the code for use on the R40. The changes are based on released DRAM code and comparing register dumps from boot0. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard

[U-Boot] [PATCH v2 11/13] sunxi: Fix CPUCFG address for R40

The R40 has the CPUCFG block at the same address as the A20. Fix it. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard --- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 6 -- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git

[U-Boot] [PATCH v2 03/13] sunxi: Enable AXP221s in I2C mode with the R40 SoC

The R40 SoC uses the AXP221s in I2C mode to supply power. Some regulator's common usages have changed, and also the recommended voltage for existing usages have changed. Update the defaults to match. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard

[U-Boot] [PATCH v2 10/13] sunxi: Enable SPL for R40

Now that we can do DRAM initialization for the R40, we can enable SPL support for it. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard --- board/sunxi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/board/sunxi/Kconfig

[U-Boot] [PATCH v2 05/13] sunxi: Add mmc[1-3] pinmux settings for R40

The PIO is generally compatible with the A20, except that it routes the full 8 bits and eMMC reset pins for mmc2. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard --- board/sunxi/board.c | 17 +++-- 1 file changed, 15

  1   2   >