Dear JJ,
On 08/07/2017 06:43 PM, Jean-Jacques Hiblot wrote:
> In the TI SOCs a PBIAS cell exists to provide a bias voltage to the MMC1
> IO cells. Without this bias voltage these I/O cells can not function
> properly. The PBIAS cell is controlled by software.
>
> Signed-off-by: Jean-Jacques Hiblo
Dear Tom,
Could you pull these patches to u-boot/master?
Sorry for late about reviewing patches.
Because of my late reviewing, some guys can't keep going their progress.
I had tested the buildman about all..As i see, there is no issue.
If there is any issue, let me know, plz.
Changelog on V2: Dr
Dear Tom,
I will resend the PR. Discard this PR.
Best Regards,
Jaehoon Chung
On 08/18/2017 02:39 PM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> Sorry for late about reviewing patches.
> Because of my late reviewing, some guys can't keep going their pro
Philipp,
On 08/17/2017 04:34 PM, Dr. Philipp Tomsich wrote:
On 17 Aug 2017, at 09:17, Kever Yang wrote:
Add sdram driver for rk3229 and other fix like pinctrl and sd node.
Changes in v2:
- split this patch in two patches
Kever Yang (5):
rockchip: rk322x: update dram bank size
rockchip
This patch add support of LS1088AQDS platform.
The LS1088A QorIQTM Development System (QDS) is a
high-performance computing, evaluation, and
development platform that supports the LS1088A QorIQ Architecture
processor.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Shaohui Xie
Signed-off-by: A
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin
platform that supports the LS1088A family SoCs. This patch add basic
support of the platform.
Signed-off-by: Alison Wang
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
Signed-off-by: Raghav Dogra
Signed-off-by:
The QorIQ LS1088A processor is built on the Layerscape
architecture combining eight ARM A53 processor cores
with advanced, high-performance datapath acceleration
and networks, peripheral interfaces required for
networking, wireless infrastructure, and general-purpose
embedded applications.
LS1088A
Dear Tom,
Could you pull these patches to u-boot/master?
Sorry for late about reviewing patches.
Because of my late reviewing, some guys can't keep going their progress.
I had tested the buildman about all..As i see, there is no issue.
If there is any issue, let me know, plz.
The following chang
It is not necessary for every SoC to have 2 SATA controller.
So put SATA1, SATA2 code under respective defines.
Signed-off-by: Prabhakar Kushwaha
Signed-off-by: Ashish Kumar
---
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/cpu/armv8/fs
LS2080 family has CCN-504 cache coherent interconnet.
Other SoCs from LSCH3 may have differnt interconnect like
LS1088.
Signed-off-by: Ashish Kumar
Signed-off-by: Prabhakar Kushwaha
---
For clean git am this "http://patchwork.ozlabs.org/patch/800408/";
should be applied first
README
Enable SPL_FIT_GENERATOR with path for it.
With this patch you can get u-boot.itb for rk3399-evb with:
> make u-boot.itb
Signed-off-by: Kever Yang
---
configs/firefly-rk3399_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_d
Since we support ATF in SPL and add script for it, let's make the
document up to date.
Signed-off-by: Kever Yang
---
board/rockchip/evb_rk3399/README | 79
1 file changed, 63 insertions(+), 16 deletions(-)
diff --git a/board/rockchip/evb_rk3399/README b
Hi Vikas,
Try to remove this magic (press 'c' on the keyboard when at the boot
time), I'd suggest to add a follow-up patch to move all the selected SPL
related configuration from "arch/arm/mach-stm32/Kconfig" under STM32F7
to default configuration file (stm32f746-disco_defconfig). Then if th
Add a script to generate binaries from bl31.elf, and generate
u-boot.its file for FIT image including u-boot, dtb and atf binaries.
Signed-off-by: Kever Yang
---
board/rockchip/evb_rk3399/mk_fit_atf.sh | 110
1 file changed, 110 insertions(+)
create mode 100755
Hi Simon,
On 08/17/2017 11:44 PM, Simon Glass wrote:
> Hi Jaehoon,
>
> On 17 August 2017 at 01:40, Jaehoon Chung wrote:
>>
>> Hi Simon,
>>
>> On 07/30/2017 02:34 AM, Simon Glass wrote:
>>> Note: This series is rebased to u-boot-mmc/master with a fix-up patch
>>> for a broken patch there.
>>>
>>>
Hi All,
Do you have any comments on this patch set?
Best Regards,
Wenyou Yang
On 2017/8/4 9:20, Wenyou Yang wrote:
The CONFIG_SYS_EXTRA_OPTIONS option is deprecated, remove the value
of this option from the board default config files.
Wenyou Yang (5):
ARM: at91: Move CONFIG_AT91FAMILY op
The following changes since commit 336aee50cf55d4d98ddf3a4412c18286e7f0a4c0:
Merge git://git.denx.de/u-boot-tegra (2017-08-16 18:12:58 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-coldfire.git master
for you to fetch changes up to a373024e7f70a04b7fed1c11be1fcd50
Signed-off-by: Lukasz Majewski
---
doc/README.dfutftp | 8
1 file changed, 8 insertions(+)
diff --git a/doc/README.dfutftp b/doc/README.dfutftp
index 0257f0d..66901e1 100644
--- a/doc/README.dfutftp
+++ b/doc/README.dfutftp
@@ -1,3 +1,11 @@
+#
+# Copyright (C) 2015
+#
+# Lukasz Majews
On 08/15/2017 03:00 AM, Tom Rini wrote:
The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere). Correct this check.
Cc: Lukasz Majewski
Signed-off-by: Tom Rini
---
common/fb_mmc.c |
Writing prepared FDT to persistent storage should be possible in
scripts. Create environment variables containing address and size
of the updated FDT. Scripts can use these variables after running
'spl export fdt ...' command to write the new blob to persistent
storage.
Signed-off-by: Anatolij Gus
Hi Pawel,
On 17 August 2017 at 12:48, Paweł Jarosz wrote:
> Simon,
>
>
> I had CONFIG_ENV_IS_NOWHERE set in wrong place (rk3066_common.h)
>
> Moving this config to board defconfig resolves the issue.
>
> Sorry for the confusion and thanks for the reply.
Ah OK, that's great! Thanks for letting me
Simon,
I had CONFIG_ENV_IS_NOWHERE set in wrong place (rk3066_common.h)
Moving this config to board defconfig resolves the issue.
Sorry for the confusion and thanks for the reply.
Regards
Paweł
W dniu 17.08.2017 o 19:46, Simon Glass pisze:
Hi Pawel,
On 17 August 2017 at 11:22, Paweł Jar
On 08/16/2017 12:11 AM, Thomas Petazzoni wrote:
> CONFIG_SYS_GENERIC_GLOBAL_DATA is no longer used by any board or
> platform, so support for it can be dropped.
>
> Signed-off-by: Thomas Petazzoni
Reviewed-by: Vladimir Zapolskiy
> ---
> README | 6 --
> common/board
W dniu 17.08.2017 o 19:46, Simon Glass pisze:
Hi Pawel,
On 17 August 2017 at 11:22, Paweł Jarosz wrote:
Hi,
i'm getting a error with last env patches (u-boot-rockchip repo).
U-boot booting halts on env_init() with message:
env_driver_lookup_default: No environment driver for location 14
Hello Thomas,
On 08/16/2017 12:07 AM, Thomas Petazzoni wrote:
> Hello,
>
> As you probably noticed with the few patches I sent late July, I am
> porting U-Boot to an old SH7786 platform.
nice, as time passes by, more and more U-Boot/SH users appear, now
there are two of us :)
Are you going to u
On Thu, Aug 17, 2017 at 12:57 PM, Heinrich Schuchardt
wrote:
> On 08/17/2017 01:49 PM, Rob Clark wrote:
>> On Tue, Aug 15, 2017 at 3:42 PM, Heinrich Schuchardt
>> wrote:
>>> Macro EFI_CALL was introduced to call an UEFI function.
>>> Unfortunately is did not support return values.
>>> Most UEFI
Hi Pawel,
On 17 August 2017 at 11:22, Paweł Jarosz wrote:
> Hi,
>
>
> i'm getting a error with last env patches (u-boot-rockchip repo).
>
> U-boot booting halts on env_init() with message:
>
>
> env_driver_lookup_default: No environment driver for location 14
>
> ...
>
> env_driver_lookup_default
Hi,
i'm getting a error with last env patches (u-boot-rockchip repo).
U-boot booting halts on env_init() with message:
env_driver_lookup_default: No environment driver for location 14
...
env_driver_lookup_default: No environment driver for location 14
initcall sequence 60445dc8 failed at c
The UEFI standard requires a watchdog timer that is preset to
five minutes. After this period the system is reset.
The watchdog shall be disabled by ExitBootServices.
An EFI application can call efi_set_watchdog_timer to either
reset the watchdog timer or disable it. This may be necessary
if the
UEFI API functions have different return types.
Some return a value of type EFI_STATUS other don't.
We therefore should not cast the return value of EFI_EXIT
to another type than the expression passed to EFI_EXIT.
Signed-off-by: Heinrich Schuchardt
---
include/efi_loader.h | 4 ++--
1 file chan
On 08/17/2017 01:49 PM, Rob Clark wrote:
> On Tue, Aug 15, 2017 at 3:42 PM, Heinrich Schuchardt
> wrote:
>> Macro EFI_CALL was introduced to call an UEFI function.
>> Unfortunately is did not support return values.
>> Most UEFI functions have a return value.
>>
>> So let's rename EFI_CALL to EFI_
It seems like we have two similar drivers for the same MUSB device.
Looking through the code, it appears as if mostly OMAP3 related boards
use the older MUSB driver, but other boards use the MUSB-NEW driver
which lead me to a few questions.
What is the differrence between them?
Is there a reason
Hi Philipp,
On 26 July 2017 at 05:22, Philipp Tomsich
wrote:
With both an imply from CMD_USB to USB_FUNCTION_MASS_STORAGE and with
USB_FUNCTION_MASS_STORAGE moved to Kconfig, we can now run moveconfig.
Signed-off-by: Philipp Tomsich
---
Changes in v3: None
Changes in v2: None
configs/CHI
Hi Jaehoon,
On 17 August 2017 at 01:40, Jaehoon Chung wrote:
>
> Hi Simon,
>
> On 07/30/2017 02:34 AM, Simon Glass wrote:
> > Note: This series is rebased to u-boot-mmc/master with a fix-up patch
> > for a broken patch there.
> >
> > This series completes the conversion of SATA to driver model.
>
On 08/17/2017 03:54 PM, Marek Vasut wrote:
On 08/17/2017 03:49 PM, Stefano Babic wrote:
On 16/08/2017 20:00, Stefan Agner wrote:
From: Stefan Agner
Add SDP (Serial Downloader Protocol) implementation for U-Boot. The
protocol is used in NXP SoC's boot ROM and allows to download program
images.
On 17/08/2017 15:54, Marek Vasut wrote:
> On 08/17/2017 03:49 PM, Stefano Babic wrote:
>> On 16/08/2017 20:00, Stefan Agner wrote:
>>> From: Stefan Agner
>>>
>>> Add SDP (Serial Downloader Protocol) implementation for U-Boot. The
>>> protocol is used in NXP SoC's boot ROM and allows to download pr
On 08/17/2017 03:49 PM, Stefano Babic wrote:
> On 16/08/2017 20:00, Stefan Agner wrote:
>> From: Stefan Agner
>>
>> Add SDP (Serial Downloader Protocol) implementation for U-Boot. The
>> protocol is used in NXP SoC's boot ROM and allows to download program
>> images. Beside that, it can also be us
On 16/08/2017 20:00, Stefan Agner wrote:
> From: Stefan Agner
>
> Add SDP (Serial Downloader Protocol) implementation for U-Boot. The
> protocol is used in NXP SoC's boot ROM and allows to download program
> images. Beside that, it can also be used to read/write registers and
> download complete
Hi Marek,
On Wed, Aug 9, 2017 at 4:49 PM, Marek Vasut wrote:
> On 08/09/2017 09:21 AM, Bin Meng wrote:
>> This converts CONFIG_USB_EHCI_PCI to a Kconfig option, and updates
>> all boards that use it.
>>
>> Signed-off-by: Bin Meng
>
> Applied, thanks
>
Will this patch be in v2017.09?
Regards,
B
This patch enables support for the Rockchip RK3066 SD/MMC controller, which is
based on Designware IP. The device supports SD, SDIO, MMC and eMMC.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- dropped OF_PLATDATA
Changes since v2:
- none
Changes since v3:
- none
drivers/mmc/rockchip_dw
This patch allows building of nand_bbt, nand_ids, nand_util for nand drivers
that need it.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
Changes since v3:
- none
drivers/mtd/nand/Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mtd/n
rk3xxx.dtsi is used by rk3188 and rk3066. rk3188 uses alocated data in spl but
rk3066 needs it in tpl.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
Changes since v3:
- none
arch/arm/dts/rk3xxx.dtsi | 8
1 file changed, 4 insertions(+), 4 deletion
Sysreset drivers for rk3066 and rk3188 contain common elements which can be
reused.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
Changes since v3:
- none
.../include/asm/arch-rockchip/sysreset_common.h| 20 +++
arch/arm/mach-rockchip/Makefile
Rockchip bootrom first reads 1KB data from nand at offset 0x10080C00 and
executes it. Then waits for back to bootrom and loads another 32KB to sram
which also executes. Sdram initialisation code needs to be in one of these two
steps. Then bootloader loads another ~200KB of data at offset 0x6000
In current state dfu depends on cmd/mtdparts.c which isn't build in SPL.
This patch resolves it by cutting out unwanted code in SPL build.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
Changes since v3:
- removed unneded space
drivers/dfu/dfu_nand.c | 5 +++
Sandisk SDTNQGAMA is a 8GB size, 3.3V 8 bit chip with 16KB page size, 1KB write
size and 40 bit ecc support
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
Changes since v3:
- none
drivers/mtd/nand/nand_ids.c | 3 +++
1 file changed, 3 insertions(+)
diff --
dw_mmc supports two transfer modes in u-boot: idma and fifo.
This patch adds autodetection of transfer mode and eliminates setting this in
host config struct
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
Changes since v3:
- none
drivers/mmc/dw_mmc.c | 8 ++
Use live tree functions to fill dwc2_plat_otg_data structure in board_usb_init.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
Changes since v3:
- none
arch/arm/mach-rockchip/rk3066-board.c | 52 +--
1 file changed, 7 insertio
The Rockchip boot ROM requires a particular file format for booting from NAND:
* It starts with 512-byte, rc4 encoded header and is aligned to nand page size
* Then first 2KB of first stage loader (tpl) aligned to nand page size
* n empty pages
* second 2KB of first stage loader (tpl) aligned to
Add basic Rockchip nand driver.
Driver in current state has 16, 24, 40, 60 per 1024B BCH/ECC ability and 8 bit
asynchronous flash interface support. Other features will come later.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- fixed correct ecc checking
Changes
Add rockchip rk3066 sdram driver
Signed-off-by: Paweł Jarosz
Acked-by: Simon Glass
Acked-by: Philipp Tomsich
---
Changes since v1:
- use common rockchip_sdram_size
- moved sdram init from sdram_init.c
Changes since v2:
- none
Changes since v3:
- none
arch/arm/mach-rockchip/rk3066/Makefile
mk808 is a tv stick with two usb ports, micro sd card slot, hdmi and
nand onboard.
Signed-off-by: Paweł Jarosz
Acked-by: Simon Glass
Acked-by: Philipp Tomsich
Reviewed-by: Philipp Tomsich
---
Changes since v1:
- added nand support
- dropped spl of-platdata
Changes since v2:
- fixed dfu ram co
Add core skeleton for rk3066
Signed-off-by: Paweł Jarosz
Acked-by: Philipp Tomsich
---
Changes since v1:
- updated to shifted masks
- moved syscon.h below spl.h
- changed error to debug and return error reason
- changed Cortex-A7 to Cortex-A9
- added nand support
- added dfu support
- removed dr
rk3066 peripherials include usb, i2c, pwm, gpio, sdio, sdmmc, emmc, spi,
watchdog and uart
Signed-off-by: Paweł Jarosz
Reviewed-by: Simon Glass
Acked-by: Philipp Tomsich
Reviewed-by: Philipp Tomsich
---
Changes since v1:
- added nand dts node
Changes since v2:
- none
Changes since v3:
- none
Add support for system reset for rk3066 socs.
Signed-off-by: Paweł Jarosz
Reviewed-by: Simon Glass
Acked-by: Philipp Tomsich
---
Changes since v1:
- updated to shifted masks
Changes since v2:
- none
Changes since v3:
- none
drivers/sysreset/Makefile | 1 +
drivers/sysreset/sysrese
Add clock driver for rk3066 platform.
Signed-off-by: Paweł Jarosz
Acked-by: Philipp Tomsich
---
Changes since v1:
- updated to shifted masks
- moved clk init to tpl
Changes since v2:
- none
Changes since v3:
- none
arch/arm/include/asm/arch-rockchip/cru_rk3066.h | 189
drivers/clk/r
Add driver supporting pin multiplexing on rk3066 platform.
Signed-off-by: Paweł Jarosz
Acked-by: Philipp Tomsich
---
Changes since v1:
- updated to shifted masks
- added nand support
Changes since v2:
- none
Changes since v3:
- none
arch/arm/include/asm/arch-rockchip/periph.h | 1 +
driver
grf is needed by various drivers for rk3066 soc.
Signed-off-by: Paweł Jarosz
Acked-by: Philipp Tomsich
---
Changes since v1:
- updated to shifted masks
Changes since v2:
- none
Changes since v3:
- none
arch/arm/include/asm/arch-rockchip/grf_rk3066.h | 621
1 file cha
This patch serie adds support for Rockchip RK3066 processor.
Paweł Jarosz (19):
rockchip: rk3066: add grf header file
rockchip: rk3066: add rk3066 pinctrl driver
rockchip: rk3066: add sysreset driver
rockchip: rk3066: add clock driver for rk3066 soc
rockchip: rk3066: add rk3066 platform
Dear Stefano,
In message <1502970920-25167-1-git-send-email-sba...@denx.de> you wrote:
> Some files for i.MX do not yet have the SPDX ID to reference the correct
> license.
>
> Signed-off-by: Stefano Babic
> ---
>
> Changes:
> - mmc_host_def.h is GplV2 and not GPLv2 or later (W. Denk)
>
> arc
On 08/17/2017 09:01 AM, Masahiro Yamada wrote:
> 2017-08-17 15:39 GMT+09:00 Jaehoon Chung :
>> On 08/13/2017 01:55 AM, Marek Vasut wrote:
>>> On 08/10/2017 09:49 AM, Masahiro Yamada wrote:
Hi.
2017-08-07 17:30 GMT+09:00 Marek Vasut :
> On 08/07/2017 04:30 AM, Masahiro Yamada
Some files for i.MX do not yet have the SPDX ID to reference the correct
license.
Signed-off-by: Stefano Babic
---
Changes:
- mmc_host_def.h is GplV2 and not GPLv2 or later (W. Denk)
arch/arm/include/asm/arch-mx35/mmc_host_def.h | 18 +-
arch/arm/include/asm/arch-mx5/iomux-mx51
On 17/08/2017 12:56, Wolfgang Denk wrote:
> Dear Stefano
>
> In message <1502957972-18085-1-git-send-email-sba...@denx.de> you wrote:
>> Some files for i.MX do not yet have the SPDX ID to reference the correct
>> license.
>
> Be careful to use identical mappings!
>
>> --- a/arch/arm/include/asm/
On Tue, Aug 15, 2017 at 3:42 PM, Heinrich Schuchardt wrote:
> Macro EFI_CALL was introduced to call an UEFI function.
> Unfortunately is did not support return values.
> Most UEFI functions have a return value.
>
> So let's rename EFI_CALL to EFI_CALL_VOID and introduce a
> new EFI_CALL macro that
On 17.08.2017 12:27, Chris Packham wrote:
The db-88f6820-amc has four chips with 2Gb density giving a total of 1GB
DRAM. Update the board_topology_map to reflect the correct
configuration.
Signed-off-by: Chris Packham
---
When I setup this board I misinterpreted 2 Gigabits as 2 Gigabytes. It
ha
Dear Stefano
In message <1502957972-18085-1-git-send-email-sba...@denx.de> you wrote:
> Some files for i.MX do not yet have the SPDX ID to reference the correct
> license.
Be careful to use identical mappings!
> --- a/arch/arm/include/asm/arch-mx35/mmc_host_def.h
> +++ b/arch/arm/include/asm/arc
Hi Paweł,
In current state dfu depends on cmd/mtdparts.c which isn't build in SPL.
This patch resolves it by cutting out unwanted code in SPL build.
Signed-off-by: Paweł Jarosz
---
Changes since v1:
- none
Changes since v2:
- none
drivers/dfu/dfu_nand.c | 6 +-
1 file changed, 5 inserti
The db-88f6820-amc has four chips with 2Gb density giving a total of 1GB
DRAM. Update the board_topology_map to reflect the correct
configuration.
Signed-off-by: Chris Packham
---
When I setup this board I misinterpreted 2 Gigabits as 2 Gigabytes. It
happened to work so I never noticed it was wro
On 08/16/2017 08:00 PM, Stefan Agner wrote:
From: Stefan Agner
Use a completely independent USB Product ID for SPL. This allows
to differentiate a SDP running in SPL and SDP running in a U-Boot
which could not read the config block successfully.
Reviewed-by: Łukasz Majewski
Signed-off-by:
Hi Stefan,
From: Stefan Agner
Document the U-Boot Serial Download Protocol implementation and
some typical use cases.
Thanks for providing the description :-)
Reviewed-by: Łukasz Majewski
Signed-off-by: Stefan Agner
---
This ended up to be almost more a imx_usb documentation. But there
On 08/16/2017 08:00 PM, Stefan Agner wrote:
From: Stefan Agner
Add USB serial download protocol support to SPL. If the SoC started
in recovery mode the SPL will immediately switch to SDP and wait for
further downloads/commands from the host side.
Reviewed-by: Łukasz Majewski
Signed-off-by
On 08/16/2017 08:00 PM, Stefan Agner wrote:
From: Stefan Agner
Add SDP (Serial Downloader Protocol) implementation for U-Boot. The
protocol is used in NXP SoC's boot ROM and allows to download program
images. Beside that, it can also be used to read/write registers and
download complete Device
Add copyright and license header.
Signed-off-by: Peng Fan
Cc: Stefano Babic
---
arch/arm/mach-imx/mx7/psci-mx7.c | 7 +++
arch/arm/mach-imx/mx7/psci.S | 7 +++
2 files changed, 14 insertions(+)
diff --git a/arch/arm/mach-imx/mx7/psci-mx7.c b/arch/arm/mach-imx/mx7/psci-mx7.c
index 5
Hi Jaehoon,
On Thu, Aug 17, 2017 at 5:01 PM, Jaehoon Chung wrote:
> On 08/09/2017 04:21 PM, Bin Meng wrote:
>> This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of
>> individual vendor id & device id pair to support generic PCI SD host
>> controller.
>>
>> Signed-off-by: Bin Meng
On Thu, Aug 17, 2017 at 1:11 PM, wrote:
> 在 2017-08-17 11:40，Chen-Yu Tsai 写道：
>>
>> The BPI-M3 is an Allwinner A83T based SBC in the Bananapi/Bpi family.
>> It is roughly the same form factor as the BPI-M1+, with roughly the
>> same peripherals and connectors:
>>
>> - 2GB LPDDR3 DRAM
>> - 8GB
On 08/07/2017 06:43 PM, Jean-Jacques Hiblot wrote:
> In the TI SOCs a PBIAS cell exists to provide a bias voltage to the MMC1
> IO cells. Without this bias voltage these I/O cells can not function
> properly. The PBIAS cell is controlled by software.
>
> Signed-off-by: Jean-Jacques Hiblot
> Revie
On 08/09/2017 04:21 PM, Bin Meng wrote:
> This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of
> individual vendor id & device id pair to support generic PCI SD host
> controller.
>
> Signed-off-by: Bin Meng
Sorry for late. Applied to u-boot-mmc. Thanks!
Best Regards,
Jaehoon Ch
On 08/09/2017 04:21 PM, Bin Meng wrote:
> This changes pci_mmc driver to use PCI_CLASS_SYSTEM_SDHCI instead of
> individual vendor id & device id pair to support generic PCI SD host
> controller.
>
> Signed-off-by: Bin Meng
> ---
>
> drivers/mmc/pci_mmc.c | 7 +--
> 1 file changed, 1 insert
On Tuesday 15 August 2017 02:58 AM, Tom Rini wrote:
> On Sat, Aug 12, 2017 at 11:59:32AM +0530, Lokesh Vutla wrote:
>
>> Signed-off-by: Lokesh Vutla
>> ---
>> arch/arm/dts/dra7-evm.dts | 276
>> --
>> 1 file changed, 23 insertions(+), 253 deletions(
> On 17 Aug 2017, at 09:17, Kever Yang wrote:
>
>
> Add sdram driver for rk3229 and other fix like pinctrl and sd node.
>
>
> Changes in v2:
> - split this patch in two patches
>
> Kever Yang (5):
> rockchip: rk322x: update dram bank size
> rockchip: rk322x: add sdram driver
> rockchip: r
Jagan,
> On 17 Aug 2017, at 08:39, Kever Yang wrote:
>
> Hi Jagan,
>
>
> On 08/10/2017 05:07 PM, Jagan Teki wrote:
>> Hi Simon/Philipp or any,
>>
>> I believe rk3288 has 20KB BootRom and 100KB internal SRAM and current
>> u-boot can archive the maximum size of u-boot-spl-dtb.bin which the
>>
> On 17 Aug 2017, at 09:51, Kever Yang wrote:
>
> Hi Philipp,
>
>
> On 07/27/2017 09:09 PM, Dr. Philipp Tomsich wrote:
>>> On 27 Jul 2017, at 15:04, Kever Yang wrote:
>>>
>>> Philipp,
>>>
>>>
>>> On 07/27/2017 08:16 PM, Dr. Philipp Tomsich wrote:
Kever,
> On 27 Jul 2017, at
Some files for i.MX do not yet have the SPDX ID to reference the correct
license.
Signed-off-by: Stefano Babic
---
arch/arm/include/asm/arch-mx35/mmc_host_def.h | 18 +-
arch/arm/include/asm/arch-mx5/iomux-mx51.h| 7 +--
arch/arm/include/asm/arch-mxs/iomux-mx23.h| 7
Tom,
there's a (trivial) fix for some fallout from
f94e643 (spl: consistently use $(SPL_TPL_) to select features for SPL
and TPL builds)
(and one unrelated trivial DTS change) in u-boot-rockchip/master ready for you.
Please pull.
Regards,
Philipp.
The following changes since commit 3
> During the the conversion to $(SPL_TPL_), the SPL_ fragment was
> left over for the NOR, XIP and YMODEM boot methods in SPL, making
> these unselectable.
>
> This commit fixes this by dropping the spurious 'SPL_' fragment
> from each line.
>
> Signed-off-by: Philipp Tomsich
> Reported-by: Bo S
During the the conversion to $(SPL_TPL_), the SPL_ fragment was
left over for the NOR, XIP and YMODEM boot methods in SPL, making
these unselectable.
This commit fixes this by dropping the spurious 'SPL_' fragment
from each line.
Signed-off-by: Philipp Tomsich
Reported-by: Bo Shen
Fixes: f94e64
Hi Stefano,
> -Original Message-
> From: Stefano Babic [mailto:sba...@denx.de]
> Sent: Thursday, August 17, 2017 4:09 PM
> To: Peng Fan ; U-Boot@lists.denx.de; Fabio Estevam
>
> Subject: Missing licenses in i.MX7 code
>
> Hi Peng,
>
> there are two files for i.MX7 that were merged witho
Dear Tom,
a quick check reveals that we have a very large number (4,300+) files
in the U-Boot tree have no SPDX license tags, or - even worse - no
license information at all.
I think this should be cleaned up. And I am aware that this would
be a lot of effort, and there will be discussions where
Hi Peng,
there are two files for i.MX7 that were merged without any license
information. Rather I have not seen this before. They are:
arch/arm/mach-imx/mx7/psci-mx7.c
arch/arm/mach-imx/mx7/psci.S
and they were added with:
commit 7de4703691498e18c58f375d724818e4d0db6223
Author: Peng Fan
Date:
CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED must be turned on for Baytrail.
Signed-off-by: Bin Meng
---
arch/x86/cpu/baytrail/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/cpu/baytrail/Kconfig b/arch/x86/cpu/baytrail/Kconfig
index 9374c12..9f9c924 100644
--- a/arch/x86/cpu/baytrai
This converts CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED to a Kconfig option.
Signed-off-by: Bin Meng
---
arch/x86/Kconfig | 7 +++
arch/x86/cpu/turbo.c | 2 +-
scripts/config_whitelist.txt | 1 -
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/x86/Kconfig b/
Add space around operator "+", make it
match the coding style.
Signed-off-by: Andy Yan
---
Changes in v2: None
arch/arm/include/asm/armv8/mmu.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index 7752741.
Macro VA_BITS and PTE_BLOCK_BITS are not used
in the code, so remove them.
Signed-off-by: Andy Yan
Reviewed-by: Philipp Tomsich
---
Changes in v2:
- remove CONFIG_SYS_PTL2_BITS from the whitelist
arch/arm/include/asm/armv8/mmu.h | 9 -
scripts/config_whitelist.txt | 2 --
2 files
USB High Speed (HS) EYE Height Adjustment
USB HS speed eye diagram fails with the default value at
many corners, particularly at a high temperature
Optimal eye at TXVREFTUNE value to 1001 is ovserved, change
set the same value.
Signed-off-by: Sriram Dash
Signed-off-by: Suresh Gupta
Signed-off-b
Hi Philipp,
On 07/27/2017 09:09 PM, Dr. Philipp Tomsich wrote:
On 27 Jul 2017, at 15:04, Kever Yang wrote:
Philipp,
On 07/27/2017 08:16 PM, Dr. Philipp Tomsich wrote:
Kever,
On 27 Jul 2017, at 13:47, Kever Yang wrote:
The emmc number is 0, correct it for fastboot parameter.
I provided
Low Frequency Periodic Singaling (LFPS) Peak-to-Peak Differential
Output Voltage Test Compliance fails using default transmitter settings
Change settings required for transmitter signal swings to pass
compliance tests.
Signed-off-by: Sriram Dash
Signed-off-by: Rajesh Bhagat
Signed-off-by: Sures
On 08/01/2017 09:27 PM, Anatolij Gustschin wrote:
> From: Angelo Dureghello
>
> This patch allows to show the EXT_CSD[179] partition_config
> register info, just by specifying the dev param:
>
> U-Boot> mmc partconf 0
> EXT_CSD[179], PARTITION_CONFIG:
> BOOT_ACK: 0x0
> BOOT_PARTITION_ENA
Rx Compliance tests may fail intermittently at high
jitter frequencies using default register values
Changes identified in test setup makes the Rx compliance test pass
Signed-off-by: Sriram Dash
Signed-off-by: Rajesh Bhagat
Signed-off-by: Suresh Gupta
Signed-off-by: Ran Wang
---
Change in v3:
The default setting for USB High Speed Squelch Threshold results
in a threshold close to or lower than 100mV. This leads to Receive
Compliance test failure for a 100mV threshold.
The changes shift the threshold from ~100mV towards ~130mV resulting
in passing of USB High Speed Receiver Sensitivity
Low Frequency Periodic Signaling(LFPS) Peak-to-Peak Differential
Output Voltage Test Compliance fails using default transmitter
settings
Change setting required for transmitter signal swings to pass
compliance tests.
Signed-off-by: Sriram Dash
Signed-off-by: Rajesh Bhagat
Signed-off-by: Suresh
1 - 100 of 118 matches
Mail list logo
