[U-Boot] [PATCH][v2]board/ls2080ardb: Update board env based on SoC

As per current implementation, default value of board env is based on board filename i.e ls2080ardb. With distro support changes, this env is used to decide upon kernel dtb which is different for other SoCs (ls2088a, ls2081a) combination supported with this board. Add support to modify board env

[U-Boot] [PATCH v2 2/2] tools: .gitignore: Add libfdt related files

Some files are generated during libfdt build. Ignore them. This was wrongly put in the .gitignore in the root directory before. Now let's remove entries there and put them in the right place. Fixes: 34e2c285 ("gitignore: add intermediates from libfdt build") Signed-off-by: Bin Meng

[U-Boot] [PATCH v2 1/2] tools: .gitignore: Sort in alphabetical order

These are currently out of alphabetical order. Signed-off-by: Bin Meng --- Changes in v2: None tools/.gitignore | 19 +-- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/tools/.gitignore b/tools/.gitignore index ac0c979..6a487d2 100644 ---

[U-Boot] [PATCH v4 10/12] ARM: at91: mach: Add missing defines of MPDDRC

Add missing defines of Multiport DDR-SDRAM Controller (MPDDRC). Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass --- Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 4 1 file

[U-Boot] [PATCH v4 09/12] board: sama5d2_xplained: Make SPL work on spiflash

Because before switching to a lower clock source, we must switch the clock source first instead of last. So before configuring the PMC_MCKR register, invoke at91_mck_init_down() first. As said in datasheet, the the size of SPL must not exceed the maximum size allowed(64Kbytes). Signed-off-by:

[U-Boot] [PATCH v4 12/12] board: atmel: Add SAMA5D27 SOM1 EK board

From: Wenyou Yang The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: Wenyou Yang --- Changes

[U-Boot] [PATCH v4 08/12] ARM: at91: spl: Add boot device for boot from QSPI

Add the boot device for booting from the QSPI flash. Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass --- Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/mach-at91/spl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git

[U-Boot] [PATCH v4 07/12] ARM: at91: spl: Add mck function to lower rate while switching

Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This

[U-Boot] [PATCH v4 11/12] ARM: at91: Get the Chip ID of SAMA5D2 SiP

From: Wenyou Yang The SAMA5D2 SiP(System in Package) has different Chip IDs in the CHIPID and CHIP_EXID registers. Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass --- Changes in v4: None Changes in v3: None Changes in

[U-Boot] [PATCH v4 06/12] ARM: at91: spl: Adjust switching to oscillator for SAMA5D2

As said in 29.5.7 section of SAMA5D2 datasheet, before switching to the crystal oscillator, a check must be carried out to ensure that the oscillator is present and that its freqency is valid. Signed-off-by: Wenyou Yang Reviewed-by: Simon Glass ---

[U-Boot] [PATCH v4 05/12] atmel: common: Add function to display via DM_VIDEO's API

Add a function to display the company's logo and board information via the API from DM_VIDEO. This function can be shared by other atmel boards, so locate it in board/atmel/common folder. Signed-off-by: Wenyou Yang --- Changes in v4: None Changes in v3: None Changes

[U-Boot] [PATCH v4 02/12] board: sama5d2_xplained: Replace code of setting mac addr

Replace the code of setting the ethernet mac address with the code from the board/atmel/common folder. Signed-off-by: Wenyou Yang --- Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/dts/at91-sama5d2_xplained.dts | 5 +++

[U-Boot] [PATCH v4 03/12] board: sama5d4_xplained: Set mac address from eeprom

Add the code of setting the ethernet mac address from eeprom via the common code from the common folder. Signed-off-by: Wenyou Yang --- Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/dts/at91-sama5d4_xplained.dts | 5 +

[U-Boot] [PATCH v4 01/12] board: atmel: Create board/atmel/common folder

Create board/atmel/common folder to accommodate the common code shared by other atmel boards, now move the code of setting ethernet mac address from eeprom, which uses the i2c eeprom driver. Signed-off-by: Wenyou Yang --- Changes in v4: None Changes in v3: None

[U-Boot] [PATCH v4 00/12] board: atmel: Add new board SAMA5D27-SOM1-EK board.

The SAMA5D27-SOM1-EK board embeds a SAMA5D27 SOM1 module, which includes a SAMA5D27-SiP chip and QSPI flash, Phy and MAC EEPROM. The SAMA5D27 SiP integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. It is based on the patch, [PATCH v2] misc: Kconfig: Add SPL_I2C_EEPROM option

Re: [U-Boot] [PATCH] gitignore: add intermediates from libfdt build

On Wed, Sep 6, 2017 at 9:12 AM, Tom Rini wrote: > On Tue, Sep 05, 2017 at 04:57:07PM +0800, Simon Glass wrote: >> Hi Bin, >> >> On 5 September 2017 at 09:33, Bin Meng wrote: >> > On Thu, Aug 31, 2017 at 8:52 PM, Simon Glass wrote: >> >>

[U-Boot] [PATCH v2] misc: Kconfig: Add SPL_I2C_EEPROM option

This option is an SPL-variant of the I2C_EEPROM option to enable the driver for generic I2C-attached EEPROMs for SPL. Signed-off-by: Wenyou Yang --- Changes in v2: - Rebase the uboot/master (84a4206). drivers/misc/Kconfig | 8 drivers/misc/Makefile | 2 +-

Re: [U-Boot] [PATCH 03/19] arm: socfpga: Add driver for flash to program FPGA

On Sel, 2017-09-05 at 11:36 +0200, Marek Vasut wrote: > On 09/05/2017 11:23 AM, Chee, Tien Fong wrote: > > > > On Sel, 2017-09-05 at 11:04 +0200, Marek Vasut wrote: > > > > > > On 09/05/2017 07:53 AM, Chee, Tien Fong wrote: > > > > > > > > > > > > On Isn, 2017-09-04 at 11:39 +0200, Marek Vasut

Re: [U-Boot] [PATCH 00/23] efi_loader implement missing functions

On 09/06/2017 01:48 AM, Rob Clark wrote: > On Tue, Sep 5, 2017 at 4:55 AM, Simon Glass wrote: >> Hi, >> >> On 1 September 2017 at 22:45, Tom Rini wrote: >>> On Wed, Aug 30, 2017 at 04:16:34AM +0800, Simon Glass wrote: Hi, On 29 August 2017 at

Re: [U-Boot] [U-Boot, v2, 4/4] efi_loader: allow multiple source files for EFI apps

On 09/05/2017 09:24 PM, Alexander Graf wrote: >> With this patch an EFI application can be built >> out of multiple source files. >> >> All object files that are to be included into the EFI >> application %.efi must be added to variable %-objs. E.g. >> >> helloworld-objs = helloworld.o >> >>

[U-Boot] [PATCH 00/10] rockchip: add tpl and OPTEE support for rk3229

Add some generic options for TPL support for arm 32bit, and then and TPL support for rk3229(cortex-A7), and then add OPTEE support in SPL. Kever Yang (10): lib: add TPL_OF_LIBFDT option for TPL arm: add option for TPL support in arm 32bit arm: add a separate stack for TPL rockchip:

[U-Boot] Fix for SHA256 Password Bug

Hi All, The SHA256 password feature doesn't seem to be working. The size argument that was passed to hash_block was undefined. I'm not sure if this patch is the best approach, but it does fix it: --- uboot-2017.01/common/autoboot.c.orig2017-09-05 07:52:56.635162924 -0400 +++

Re: [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock

On Mon, Sep 04, 2017 at 07:37:01PM -0700, Eric Nelson wrote: >Hi Peng, > >Pardon the reference to an old update, but do you have a description >of the symptoms that brought about this patch? Sorry for late reply. Runtime calculation is better. The clk here is IPU HSP clock, which default sources

Re: [U-Boot] [PATCH v2 3/8] fat/fs: convert to directory iterators

On Tue, Sep 5, 2017 at 4:56 AM, Simon Glass wrote: > Hi Rob, > > On 3 September 2017 at 23:08, Łukasz Majewski wrote: >> On 09/02/2017 06:37 PM, Rob Clark wrote: >>> >>> And drop a whole lot of ugly code! > > :-) > >> >> >> +1 >> >> Reviewed-by: Łukasz Majewski

[U-Boot] [PATCH 09/10] rockchip: evb-rk3229: add README file for OP-TEE support

Detail of step by step to bring up the board with OP-TEE support. Signed-off-by: Kever Yang --- board/rockchip/evb_rk3229/README | 72 1 file changed, 72 insertions(+) create mode 100644 board/rockchip/evb_rk3229/README diff

[U-Boot] [PATCH 08/10] rockchip: evb-rk3229: add fit source file for itb

We package U-Boot and OP-TEE into one itb file for SPL, so that we can support OP-TEE in SPL. Signed-off-by: Kever Yang --- board/rockchip/evb_rk3229/fit_spl_optee.its | 48 + 1 file changed, 48 insertions(+) create mode 100644

[U-Boot] [PATCH 07/10] rockchip: rk322x: dts: enable uart2 for SPL/TPL

When we use DM_SERIAL for serial driver, we need enable the dts node for the debug console. Signed-off-by: Kever Yang --- arch/arm/dts/rk3229-evb.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/dts/rk3229-evb.dts b/arch/arm/dts/rk3229-evb.dts index

[U-Boot] [PATCH 10/10] rockchip: evb-rk322x: update defconfig with tpl and optee support

Enable all the options for TPL/SPL and OPTEE. Signed-off-by: Kever Yang --- configs/evb-rk3229_defconfig | 28 1 file changed, 24 insertions(+), 4 deletions(-) diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig

[U-Boot] [PATCH 06/10] spl: add support to booting with OP-TEE

OP-TEE is an open source trusted OS, in armv7, its loading and running are like this: loading: - SPL load both OP-TEE and U-Boot running: - SPL run into OP-TEE in secure mode; - OP-TEE run into U-Boot in non-secure mode; More detail: https://github.com/OP-TEE/optee_os and search for 'boot

[U-Boot] [PATCH 03/10] arm: add a separate stack for TPL

TPL stack may different from SPL and sys stack, add support for separate one when the board defines it. Signed-off-by: Kever Yang --- arch/arm/lib/crt0.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S

[U-Boot] [PATCH 05/10] sysreset: enable driver support in SPL/TPL

SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: Kever Yang --- drivers/sysreset/Kconfig | 18 ++ drivers/sysreset/Makefile | 2 +- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git

[U-Boot] [PATCH 04/10] rockchip: rk322x: enable tpl support

Move original spl to tpl, and add spl to load next stage firmware, adapt all the address and option for them. Signed-off-by: Kever Yang --- arch/arm/mach-rockchip/Kconfig | 9 arch/arm/mach-rockchip/Makefile | 3 +-

[U-Boot] [PATCH 02/10] arm: add option for TPL support in arm 32bit

Some options like TPL_SYS_THUMB_BUILD, TPL_USE_ARCH_MEMCPY and TPL_USE_ARCH_MEMCPY are needed for TPL build in 32bit arm. Signed-off-by: Kever Yang --- arch/arm/Kconfig | 29 + 1 file changed, 29 insertions(+) diff --git

[U-Boot] [PATCH 01/10] lib: add TPL_OF_LIBFDT option for TPL

TPL may need use libfdt for dt decode, add option for it. Signed-off-by: Kever Yang --- lib/Kconfig | 10 ++ 1 file changed, 10 insertions(+) diff --git a/lib/Kconfig b/lib/Kconfig index d73052d..d2a6dae 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -204,6

Re: [U-Boot] [PATCH v2 7/8] fat/fs: move ls to generic implementation

On Tue, Sep 5, 2017 at 4:56 AM, Simon Glass wrote: > On 3 September 2017 at 00:38, Rob Clark wrote: >> Add a generic implementation of 'ls' using opendir/readdir/closedir, and >> replace fat's custom implementation. Other filesystems should move to >> the

Re: [U-Boot] [PATCH 0/3] Clean up make process for EFI payload

On 09/05/2017 04:23 PM, Andy Shevchenko wrote: > On Tue, 2017-09-05 at 03:19 +0200, Heinrich Schuchardt wrote: >> Currently we have a single EFI application that we can deliver >> integrated into U-Boot. It is a hello world application that >> can be called with 'bootefi hello'. >> >> The

[U-Boot] [PATCH v3 4/6] bootstage: Drop unused options

The CONFIG_BOOTSTAGE_USER_COUNT option is no-longer needed since we can now support any number of user IDs. Also BOOTSTAGE_ID_COUNT is not needed now. Drop these unused options. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- Changes in v3: None

[U-Boot] [PATCH v3 5/6] bootstage: Provide a separate record count setting for SPL

With SPL we often have limited memory and do not need very many bootstage records. Add a separate Kconfig option for SPL. Signed-off-by: Simon Glass --- Changes in v3: None Changes in v2: None common/Kconfig | 7 +++ common/bootstage.c | 6 +++--- 2 files changed,

[U-Boot] [PATCH v3 1/6] board_f: Drop the timer after relocation

Once U-Boot relocates itself the existing driver-model timer (if any) is no-longer valid until the device is reinitialised. Any use of the device may cause a crash. To handle this, set the timer to NULL after relocation. Signed-off-by: Simon Glass --- Changes in v3: - Bracket

[U-Boot] [PATCH v3 6/6] x86: Enable early timer for chromebook_link

Enable this option for link so that the timer is available earlier. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- Changes in v3: None Changes in v2: - Add new patch to enable early timer for chromebook_link configs/chromebook_link64_defconfig | 1

[U-Boot] [PATCH v3 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready

Use the new separate init function so that we can make use of the timer before driver model is started up. At some point we should consider adding the microsecond timer to the timer uclass interface since it would reduce the amount of plumbing here slightly. Signed-off-by: Simon Glass

[U-Boot] [PATCH v3 2/6] dm: x86: Allow TSC timer to be used before DM is ready

With bootstage we need access to the timer before driver model is set up. To handle this, put the required state in global_data and provide a new function to set up the device, separate from the driver's probe() method. This will be used by the 'early' timer also. Signed-off-by: Simon Glass

[U-Boot] [PATCH v3 0/6] x86: bootstage: Fix bootstage operation on link

Recent bootstage changes have provoked problems with chromebook_link. Bootstage uses the timer before driver model is ready, but link uses driver model for the timer. This series: - Updates the TSC timer to make the bootstage work before DM is ready - Provides a way to have a separate setting for

Re: [U-Boot] [PATCH 11/13] x86: braswell: Add FSP configuration

Hi Bin, On 26 August 2017 at 18:10, Bin Meng wrote: > Hi Simon, > > On Sun, Aug 27, 2017 at 6:39 AM, Simon Glass wrote: >> Hi Bin, >> >> On 26 August 2017 at 07:56, Bin Meng wrote: >>> Hi Simon, >>> >>> On Sat, Aug 26, 2017 at 9:39 PM,

Re: [U-Boot] [PATCH 5/5] x86: fsp: Configure SPI opcode registers before SPI is locked down

Hi Bin, On 26 August 2017 at 18:12, Bin Meng wrote: > Hi Simon, > > On Sun, Aug 27, 2017 at 6:40 AM, Simon Glass wrote: >> Hi Bin, >> >> On 26 August 2017 at 07:58, Bin Meng wrote: >>> Hi Simon, >>> >>> On Sat, Aug 26, 2017 at 9:39 PM,

Re: [U-Boot] [PATCH v2 3/6] dm: x86: Update timer_get_boot_us to work before DM is ready

Hi Bin, On 27 August 2017 at 23:18, Bin Meng wrote: > Hi Simon, > > On Sun, Aug 27, 2017 at 11:23 PM, Simon Glass wrote: >> Use the new separate init function so that we can make use of the timer >> before driver model is started up. >> >> At some point we

Re: [U-Boot] video: ipu_common: fix build error

Hi Eric, On Mon, Sep 04, 2017 at 07:48:56PM -0700, Eric Nelson wrote: >Hi Peng, > >Can you tell that I'm hunting a bug in an old version? > >I'm seeing a **very** intermittent regression between U-Boot >versions 2015.07 and 2016.05 and happened to spot something >in this patch. > >On 04/27/2016

Re: [U-Boot] [PATCH] gitignore: add intermediates from libfdt build

On Tue, Sep 05, 2017 at 04:57:07PM +0800, Simon Glass wrote: > Hi Bin, > > On 5 September 2017 at 09:33, Bin Meng wrote: > > On Thu, Aug 31, 2017 at 8:52 PM, Simon Glass wrote: > >> On 29 August 2017 at 17:47, Philipp Tomsich > >>

Re: [U-Boot] [PATCH 1/4] blk: Use macros for block device vendor/product/rev string size

On Sun, Sep 03, 2017 at 09:00:07PM -0700, Bin Meng wrote: > So far these are using magic numbers. Replace them with macros. > > Signed-off-by: Bin Meng > --- > > include/blk.h | 10 +++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/include/blk.h

Re: [U-Boot] [PATCH] env: Fix out of tree building of tools-all

On Tue, Sep 05, 2017 at 02:20:09PM -0400, Tom Rini wrote: > With the move of environment code from common/ to env/ a number of > changes needed to be made to various make targets. We missed updating > some of the files required for out of tree builds of the tools. Correct > the 'environ' target

Re: [U-Boot] [U-Boot,v2,1/2] env: Fix operation of 'make environ'

On Tue, Sep 05, 2017 at 01:53:58AM -0600, Simon Glass wrote: > This was broken by the recent environment refactoring. Specifically: > > $ make environ > scripts/Makefile.build:59: tools/environ/Makefile: No such file or directory > make[1]: *** No rule to make target 'tools/environ/Makefile'.

Re: [U-Boot] [U-Boot, v2, 2/2] env: Add 'envtools' target to 'make help'

On Tue, Sep 05, 2017 at 01:53:59AM -0600, Simon Glass wrote: > The target is not currently mentioned anywhere. Add it to the help so > people can find it. > > Signed-off-by: Simon Glass Applied to u-boot/master, thanks! -- Tom signature.asc Description: Digital signature

Re: [U-Boot] [U-Boot, v3, 1/1] usb: gadget: g_dnl: Sync internal SN variable with env

On Fri, Sep 01, 2017 at 03:42:03PM +0300, Sam Protsenko wrote: > Since commit 842778a09104 ("usb: gadget: g_dnl: only set iSerialNumber > if we have a serial#") "fastboot devices" stopped to show correct device > serial number for TI boards, showing this line instead: > >

Re: [U-Boot] Please pull u-boot-video/master

On Tue, Sep 05, 2017 at 01:41:38PM +0200, Anatolij Gustschin wrote: > Hi Tom, > > Please pull these fixes for v2017.09. The IPU and splash driver changes > passed the full build test, here is a status report: > > https://travis-ci.org/vdsao/u-boot-video/builds/271856994 Ah good, thanks. >

Re: [U-Boot] [PULL] Please pull u-boot-rockchip/master

On Tue, Sep 05, 2017 at 11:25:17AM +0200, Dr. Philipp Tomsich wrote: > Tom, > > I have a few lingering fixes and config changes. > > Thanks, > Philipp. > > > The following changes since commit 0e88cdd17da393e7dd6040de6a3fda289c00a51e: > > Prepare v2017.09-rc4 (2017-09-04 09:02:48 -0400) >

[U-Boot] [PATCH V2 2/2] omap3: am3517_evm: Enable TI_COMMON_CMD_OPTION

Enable TI_COMMON_CMD_OPTIONS and remove similar options from the defconfig. Updated with savedefconfig. Tested-by: Derald D. Woods Signed-off-by: Adam Ford --- V2: Resync with 2017.09-RC4 board/logicpd/am3517evm/Kconfig | 2 ++

[U-Boot] [PATCH V2 1/2] ARM: OMAP3: am3517_evm: Move header to ti_omap3_common.h

Much of the AM3517 functions are copies of the standard definitions used in ti_omap3_common.h. Moving to include a common file reduces the amount of duplicative code and clutter. A few AM3517 specific functions (like EMIF4) are explictly defined and a few items are undefined or redefined, but

Re: [U-Boot] [PATCH 00/23] efi_loader implement missing functions

On Tue, Sep 5, 2017 at 4:55 AM, Simon Glass wrote: > Hi, > > On 1 September 2017 at 22:45, Tom Rini wrote: >> On Wed, Aug 30, 2017 at 04:16:34AM +0800, Simon Glass wrote: >>> Hi, >>> >>> On 29 August 2017 at 22:16, Rob Clark wrote: >>>

[U-Boot] [PATCH 2/2] mx6sabresd: Add Serial Download Protocol support

From: Fabio Estevam Add Serial Download Protocol support (SDP), which allows loading SPL and u-boot.img via imx_usb_loader tool as explained in doc/README.sdp. Signed-off-by: Fabio Estevam --- In order to get SDP functional on sabresd we need these

[U-Boot] [PATCH 1/2] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code

From: Fabio Estevam Instead of having every board file to add its own g_dnl_bind_fixup() implementation, move it to the common imx6 SPL code. Signed-off-by: Fabio Estevam Reviewed-by: Łukasz Majewski --- Changes since RFC: - Keep

Re: [U-Boot] rk3188/rock_defconfig sdmmc failures

Hi Artturi, Am Mittwoch, 6. September 2017, 01:50:38 CEST schrieb Artturi Alm: > So, being optimistic, i added compatible found from > arch/arm/dts/rk3xxx.dtsi, included by rk3188: > > diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c > index e7fcf89..a879fcd 100644 >

[U-Boot] rk3188/rock_defconfig sdmmc failures

Hi, i'd like to get U-Boot working on rockchip/rk3188(rock_defconfig). current as-is: U-Boot SPL 2017.09-rc4-9-ga0e80c9 (Sep 05 2017 - 23:47:57) Returning to boot ROM... U-Boot 2017.09-rc4-9-ga0e80c9 (Sep 05 2017 - 23:47:57 +0300) Model: Radxa Rock DRAM: 2 GiB MMC: MMC Device 0

Re: [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code

On Tue, Sep 5, 2017 at 6:18 PM, Stefan Agner wrote: > Note that 0xfff was a rather randomly picked offset, not sure if we want that > in common code. Yes, I noticed that. I am inclined to go with 0xfff and then later we can even introduce a CONFIG option for the

Re: [U-Boot] [ANN] U-Boot v2017.09-rc4 released

Hi, On 09/04/2017 10:55 PM, Paul Barker wrote: I looks like u-boot v2017.09-rc4 is still unable to boot Linux on Raspberry Pi devices. I've just tested this now on a Raspberry Pi (original Model B) and confirmed that it gets stuck at "Starting kernel ...". FWIW, works for me. I think you

Re: [U-Boot] [RFC] toradex: imx6: Move g_dnl_bind_fixup() into common SPL code

On 03.09.2017 07:56, Fabio Estevam wrote: > From: Fabio Estevam > > Instead of having every board file to add its own g_dnl_bind_fixup() > implementation, move it to the common imx6 SPL code. > > Signed-off-by: Fabio Estevam > --- > Stefan, > > I

[U-Boot] USB Ethernet with device model

Hi, I've been working with USB-Ethernet gadget for quite some time on the Allwinner SoCs, especially because most Allwinner boards lack an ethernet controller. The thing is, it wasn't really upstreamable all this time since we've had also some boards that had a controller with DM_ETH. And

[U-Boot] [PATCH 2/2] arm: omap3_logic: Migrate SMC911X to Kconfig

With SMC911X supported in Kconfig, let's migrate the Logic PD OMAP3 board. Signed-off-by: Adam Ford --- configs/omap3_logic_defconfig | 4 include/configs/omap3_logic.h | 7 --- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git

[U-Boot] [PATCH 1/2] net: Add SMC911X driver to Kconfig

There are a variety of boards that need some cleanup in their respective include/configs file, but here is a foundation for them to begin their transisiton. Signed-off-by: Adam Ford --- drivers/net/Kconfig | 29 + 1 file changed, 29 insertions(+)

Re: [U-Boot] [PATCH] env: Fix out of tree building of tools-all

On Tue, Sep 5, 2017 at 7:20 PM, Tom Rini wrote: > With the move of environment code from common/ to env/ a number of > changes needed to be made to various make targets. We missed updating > some of the files required for out of tree builds of the tools. Correct > the

[U-Boot] [PATCH] i2c: muxes: pca954x: Add support for GPIO reset line

This commit adds support for GPIO reset lines matching the common linux "reset-gpios" devicetree binding. Signed-off-by: Moritz Fischer Cc: Heiko Schocher Cc: Stefan Roese Cc: Marek Behún Cc: Simon Glass

[U-Boot] [PATCH] env: Fix out of tree building of tools-all

With the move of environment code from common/ to env/ a number of changes needed to be made to various make targets. We missed updating some of the files required for out of tree builds of the tools. Correct the 'environ' target to know that we need to work under tools/env/ still (not

Re: [U-Boot] [ANN] U-Boot v2017.09-rc4 released

On Tue, Sep 5, 2017 at 6:55 PM, Tom Rini wrote: > On Tue, Sep 05, 2017 at 06:47:20PM +0100, Peter Robinson wrote: >> On Tue, Sep 5, 2017 at 6:42 PM, Tom Rini wrote: >> > On Tue, Sep 05, 2017 at 06:26:59PM +0100, Peter Robinson wrote: >> >> On Mon, Sep 4,

Re: [U-Boot] [ANN] U-Boot v2017.09-rc4 released

On Tue, Sep 05, 2017 at 06:47:20PM +0100, Peter Robinson wrote: > On Tue, Sep 5, 2017 at 6:42 PM, Tom Rini wrote: > > On Tue, Sep 05, 2017 at 06:26:59PM +0100, Peter Robinson wrote: > >> On Mon, Sep 4, 2017 at 2:05 PM, Tom Rini wrote: > >> > Hey all, > >>

Re: [U-Boot] [ANN] U-Boot v2017.09-rc4 released

On Tue, Sep 5, 2017 at 6:42 PM, Tom Rini wrote: > On Tue, Sep 05, 2017 at 06:26:59PM +0100, Peter Robinson wrote: >> On Mon, Sep 4, 2017 at 2:05 PM, Tom Rini wrote: >> > Hey all, >> > >> > It's release day and v2017.09-rc4 is out. It's a week until

Re: [U-Boot] [ANN] U-Boot v2017.09-rc4 released

On Tue, Sep 05, 2017 at 04:55:48PM +0800, Simon Glass wrote: > Hi Paul, > > On 5 September 2017 at 03:55, Paul Barker wrote: > > On Mon, Sep 4, 2017 at 2:05 PM, Tom Rini wrote: > >> Hey all, > >> > >> It's release day and v2017.09-rc4 is out. It's a

Re: [U-Boot] [ANN] U-Boot v2017.09-rc4 released

On Tue, Sep 05, 2017 at 06:26:59PM +0100, Peter Robinson wrote: > On Mon, Sep 4, 2017 at 2:05 PM, Tom Rini wrote: > > Hey all, > > > > It's release day and v2017.09-rc4 is out. It's a week until release > > day. Please let me know if you know of any regressions, thanks! > >

Re: [U-Boot] [ANN] U-Boot v2017.09-rc4 released

On Mon, Sep 4, 2017 at 2:05 PM, Tom Rini wrote: > Hey all, > > It's release day and v2017.09-rc4 is out. It's a week until release > day. Please let me know if you know of any regressions, thanks! I'm seeing an issue with a "make defconfig" we use in Fedora for various

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

On Tue, Sep 5, 2017 at 1:26 PM, Stefan Agner wrote: > Yes, I understand. > > I am just saying, I don't see a point to use that macro over i.MX 7's > Boot Information structure... Correct, and I did not suggest this either :-) ___

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

On 2017-09-05 09:18, Fabio Estevam wrote: > On Tue, Sep 5, 2017 at 1:05 PM, Stefan Agner wrote: > >> i.MX 7 has a Boot Information structure which is passed from the Boot >> ROM, so we have a much cleaner method there. >>

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

On Tue, Sep 5, 2017 at 1:05 PM, Stefan Agner wrote: > i.MX 7 has a Boot Information structure which is passed from the Boot > ROM, so we have a much cleaner method there. >

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

On 2017-09-05 06:45, Fabio Estevam wrote: > Hi Stefano, > > On Tue, Sep 5, 2017 at 8:16 AM, Stefano Babic wrote: > >> Maybe we get some further info from our "insider" (Fabio, Peng). It will >> be very interesting to know if we can apply this to all spectrum from >> i.MX6, or if

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

On 2017-09-05 04:13, Fabio Estevam wrote: > Hi Stefan, > > On Mon, Sep 4, 2017 at 10:21 PM, Stefan Agner wrote: >> From: Stefan Agner >> >> This macro allows to detect whether the boot ROM initialized USB >> already (serial downloader). This is helpful

Re: [U-Boot] [PATCH 0/3] Clean up make process for EFI payload

On Tue, 2017-09-05 at 03:19 +0200, Heinrich Schuchardt wrote: > Currently we have a single EFI application that we can deliver > integrated into U-Boot. It is a hello world application that > can be called with 'bootefi hello'. > > The Makefiles do not easily accomodate further EFI payloads >

[U-Boot] [PATCH v2 2/4] scripts/Makefile.lib: generalize building built in EFI app

Replace all occurences of helloworld by generalized forms. This allows us to build additional EFI applications that are included into the U-Boot binary without loading scripts/Makefile.lib with specific filenames. Signed-off-by: Heinrich Schuchardt --- v2 Removed

[U-Boot] [PATCH v2 3/4] efi_loader: usage of always in Makefile

Variable always should only be appended but not overwritten by lib/efi_loader/Makefile. Remove variable efiprogs which is not otherwise used. Signed-off-by: Heinrich Schuchardt --- v2 no change --- lib/efi_loader/Makefile | 5 +++-- 1 file changed, 3 insertions(+),

[U-Boot] [PATCH v2 4/4] efi_loader: allow multiple source files for EFI apps

With this patch an EFI application can be built out of multiple source files. All object files that are to be included into the EFI application %.efi must be added to variable %-objs. E.g. helloworld-objs = helloworld.o script/Makefile.lib automatically generates file %_efi.d containing

[U-Boot] [PATCH v2 0/4] Clean up make process for EFI payload

Currently we have a single EFI application that we can deliver integrated into U-Boot. It is a hello world application that can be called with 'bootefi hello'. The Makefiles do not easily accomodate further EFI payloads like a unit test for the EFI API or an EFI shell. This patch series changes

[U-Boot] [PATCH v2 1/4] efi_loader: rename __efi_hello_world_*

In scripts/Makefile.lib we build section including helloworld.efi. This allows to load the EFI binary with command 'bootefi hello'. scripts/Makefile.lib contains explicit references to strings containing helloworld and hello_world. This makes it impossible to generalize the coding to accomodate

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

Hi Eric, On 05/09/2017 15:49, Eric Nelson wrote: > Hi Stefano, > > On 09/05/2017 04:16 AM, Stefano Babic wrote: >> Hi Stefan, >> On 05/09/2017 03:21, Stefan Agner wrote: >>> From: Stefan Agner >>> >>> This macro allows to detect whether the boot ROM initialized USB >>>

Re: [U-Boot] video: ipu_common: fix build error

Hi Fabio, On 09/05/2017 06:33 AM, Fabio Estevam wrote: Hi Eric, On Mon, Sep 4, 2017 at 11:49 PM, Eric Nelson wrote: Hi Peng, Can you tell that I'm hunting a bug in an old version? I'm seeing a **very** intermittent regression between U-Boot versions 2015.07 and 2016.05 and

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

Hi Stefano, On 09/05/2017 04:16 AM, Stefano Babic wrote: Hi Stefan, On 05/09/2017 03:21, Stefan Agner wrote: From: Stefan Agner This macro allows to detect whether the boot ROM initialized USB already (serial downloader). This is helpful to reliably detect if the

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

Hi Stefan, On Tue, Sep 5, 2017 at 1:50 AM, Stefan Agner wrote: > Note this idea is borrowed from NXP downstream and seems to work here: > http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/arch/arm/include/asm/arch-mx7/imx-regs.h?h=imx_v2016.03_4.1.15_2.0.0_ga#n1204

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

Hi Stefano, On Tue, Sep 5, 2017 at 8:16 AM, Stefano Babic wrote: > Maybe we get some further info from our "insider" (Fabio, Peng). It will > be very interesting to know if we can apply this to all spectrum from > i.MX6, or if there is some MX6 variant where the Bootrom is doing

Re: [U-Boot] [PATCH v1 1/2] imx: add macro to detect whether USB has been initialized

Hi Stefan, On 09/04/2017 09:50 PM, Stefan Agner wrote: On 2017-09-04 19:57, Eric Nelson wrote: On 09/04/2017 06:21 PM, Stefan Agner wrote: + +/* + * If ROM fell back to USB recover mode, USBPH0_PWD will be clear to use USB + * If boot from the other mode, USB0_PWD will keep reset value +

Re: [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock

Hi Stefano, On 09/05/2017 06:30 AM, Stefano Babic wrote: On 05/09/2017 14:56, Fabio Estevam wrote: Hi Eric, On Mon, Sep 4, 2017 at 11:37 PM, Eric Nelson wrote: --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -225,7 +225,11 @@

Re: [U-Boot] video: ipu_common: fix build error

Hi Eric, On Mon, Sep 4, 2017 at 11:49 PM, Eric Nelson wrote: > Hi Peng, > > Can you tell that I'm hunting a bug in an old version? > > I'm seeing a **very** intermittent regression between U-Boot > versions 2015.07 and 2016.05 and happened to spot something > in this patch.

Re: [U-Boot] [U-Boot,2/3] imx: mx6: correct IPU clock

On 05/09/2017 14:56, Fabio Estevam wrote: > Hi Eric, > > On Mon, Sep 4, 2017 at 11:37 PM, Eric Nelson wrote: > >>> --- a/include/configs/mx6sabre_common.h >>> +++ b/include/configs/mx6sabre_common.h >>> @@ -225,7 +225,11 @@ >>> #define CONFIG_BMP_16BPP >>> #define

Re: [U-Boot] [PATCH v3 1/1] usb: gadget: g_dnl: Sync internal SN variable with env

On 09/01/2017 02:42 PM, Sam Protsenko wrote: > Since commit 842778a09104 ("usb: gadget: g_dnl: only set iSerialNumber > if we have a serial#") "fastboot devices" stopped to show correct device > serial number for TI boards, showing this line instead: > > fastboot > > This

[U-Boot] [PATCH] ARM: rmobile: Fix SD divider settings on Gen3

On RCar M3 and on RCar H3 newer than and not including ES1.0, the SD clock must be divided by 4 rather than 2 because a hardware workaround present only in the H3 ES1.0 has been removed from these chips. U-Boot currently only supports M3 and H3 ES 2.0 and newer, so configure the SD pre-divider to

[U-Boot] [PATCH v2] arm64: ls1012ardb: Add distro boot support

Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD and USB) and execute autoboot script. Signed-off-by: Bhaskar Upadhaya Signed-off-by:

  1   2   >