V2:
- Add review-by as indicated - Peng Fan
- Squash commit 4 and 5 from v1 - Peng Fan
- Leave usdhc1 intact because of alias of mmc0 to usdhc3 - Bryan
- Add correction for spelling mistake in imx7d-pinfunc.h - Lukas Auer
- Imports imx7s-warp7.dts from kernel unmodified as a result of #1 - Bryan
V
On 09/01/19 17:21, Tom Rini wrote:
> On Wed, Jan 09, 2019 at 04:48:06PM +0100, Stefano Babic wrote:
>> Hi Tom,
>>
>> On 02/01/19 02:02, Tom Rini wrote:
>>> On Tue, Jan 01, 2019 at 02:51:53PM +0100, Stefano Babic wrote:
>>>
Hi Tom,
I dropped for the moment the following patches from D
On Wed, Jan 09, 2019 at 04:48:06PM +0100, Stefano Babic wrote:
> Hi Tom,
>
> On 02/01/19 02:02, Tom Rini wrote:
> > On Tue, Jan 01, 2019 at 02:51:53PM +0100, Stefano Babic wrote:
> >
> >> Hi Tom,
> >>
> >> I dropped for the moment the following patches from Denis:
> >>
> >> bootcount: i2c:
Hi Tien Fong,
On Sat, 29 Dec 2018 at 18:36, wrote:
>
> From: Tien Fong Chee
>
> Firmware loader would encounter problem if the MMC is accessed before
> initializing it. This patch would adding the support of probing block
> device and initializing MMC before the MMC is accessed by firmware loade
Hi Soeren,
On 08/01/19 12:03, Soeren Moch wrote:
> Hi Stefano,
>
> On 08.01.19 11:24, Stefano Babic wrote:
>> Hi Soeren,
>>
>> On 08/01/19 11:14, Soeren Moch wrote:
>>> Stefano,
>>>
>>> can you apply this for v2019.01? This is really a important fix to avoid
>>> environment and u-boot binary ove
On 09/01/19 16:42, Chris Spencer wrote:
> Stefano,
>
> On Wed, 9 Jan 2019 at 15:14, Stefano Babic wrote:
>>> https://patchwork.ozlabs.org/patch/1019908/
>>
>> I have seen this patch to solve "bashism", I confess I had to think
>> about what is it. "=" instead of "==" is quite unnatural for me, bu
Hi Tom,
On 02/01/19 02:02, Tom Rini wrote:
> On Tue, Jan 01, 2019 at 02:51:53PM +0100, Stefano Babic wrote:
>
>> Hi Tom,
>>
>> I dropped for the moment the following patches from Denis:
>>
>> bootcount: i2c: Add bus switching to the I2C bootcount driver
>> bootcount: Configure length
Stefano,
On Wed, 9 Jan 2019 at 15:14, Stefano Babic wrote:
> > https://patchwork.ozlabs.org/patch/1019908/
>
> I have seen this patch to solve "bashism", I confess I had to think
> about what is it. "=" instead of "==" is quite unnatural for me, but
> yes, first thing I do on a new installed syst
Hi Stefan, Lukasz,
On 04/01/19 16:05, Stefan Agner wrote:
> Hi Stefano,
>
> On 14.12.2018 14:40, Stefano Babic wrote:
>> On 14/12/18 14:30, Tom Rini wrote:
>>> On Fri, Dec 14, 2018 at 02:26:22PM +0100, Stefan Agner wrote:
On 14.12.2018 14:20, Tom Rini wrote:
> On Fri, Dec 14, 2018 at 02:
On 09/01/19 15:56, Chris Spencer wrote:
> [CC'd the list this time..]
>
> On Wed, 9 Jan 2019 at 13:56, Stefano Babic wrote:
>> Sorry, I was on holidays and afterwards I have to resume some work in
>> office ;-)
>>
>> I am now looking for which patches should be merged in release and I
>> will pic
On 1/9/19 8:05 AM, Bin Meng wrote:
> On Tue, Jan 8, 2019 at 7:19 PM Marek Vasut wrote:
>>
>> On 1/8/19 7:34 AM, Bin Meng wrote:
>>> On Tue, Jan 8, 2019 at 12:00 PM Ye Li wrote:
On 1/7/2019 5:54 PM, Bin Meng wrote:
> On Mon, Jan 7, 2019 at 10:45 AM Ye Li wrote:
>>
>> After u
[CC'd the list this time..]
On Wed, 9 Jan 2019 at 13:56, Stefano Babic wrote:
> Sorry, I was on holidays and afterwards I have to resume some work in
> office ;-)
>
> I am now looking for which patches should be merged in release and I
> will pick them up.
Hi Stefano,
If I may make my own (self
Hello,
We are trying to access uboot variables from our application running over
Linux.
We are using Yocto krogoth 2.1.1 for imx6ul evaluation kit
"mx6ul_14x14_evk".
We have built u-boot-fw-utils by adding "CORE_IMAGE_EXTRA_INSTALL +=
"u-boot-fw-utils" in the local.conf file.
Issues:
Hi Stefano,
> -Original Message-
> From: Stefano Babic [mailto:sba...@denx.de]
> Sent: 2019年1月9日 21:56
> To: Peng Fan ; sba...@denx.de
> Cc: Fabio Estevam ; u-boot@lists.denx.de;
> dl-uboot-imx
> Subject: Re: [PATCH 0/5] imx8: several fixes
>
> Hi Peng,
>
> On 02/01/19 13:10, Peng Fan w
Existing clock configure code has been followed based on the
legacy MMC dt node definitions and it cannot work with recent
dts(i) sync from Linux.
So, add clock configure code for Allwinner platforms which support
DM_MMC and eventually this will drop once CLK support is in Mainline.
Fixes: 3c92cc
Hi Peng,
On 02/01/19 13:10, Peng Fan wrote:
> Ping.
>
> Thanks,
> Peng.
>
Sorry, I was on holidays and afterwards I have to resume some work in
office ;-)
I am now looking for which patches should be merged in release and I
will pick them up.
Regards,
Stefano
>> -Original Message-
>>
On Wed, Jan 09, 2019 at 09:03:19AM +, André Przywara wrote:
> On 09/01/2019 03:44, Tom Rini wrote:
> > On Mon, Dec 17, 2018 at 10:05:45AM +, Andre Przywara wrote:
> >
> >> Commit d0851c893706 ("blk: Call part_init() in the post_probe() method")
> >> removed the call to part_init() in mmc.c
Hi Alexey,
On Wed, Jan 9, 2019 at 9:36 AM Alexey Brodkin
wrote:
>
> Hi Simon,
>
> > -Original Message-
> > From: Simon Goldschmidt [mailto:simon.k.r.goldschm...@gmail.com]
> > Sent: Tuesday, January 8, 2019 12:14 AM
> > To: Marek Vasut
> > Cc: Simon Goldschmidt ; Patrice Chotard
> > ;
>
On 08/01/2019 13:26, Peng Fan wrote:
-Original Message-
From: Bryan O'Donoghue [mailto:bryan.odonog...@linaro.org]
Sent: 2019年1月3日 9:45
To: u-boot@lists.denx.de
Cc: Fabio Estevam ; Peng Fan
; Bryan O'Donoghue ;
Stefano Babic
Subject: [PATCH 5/8] warp7: defconfig: Switch on IMX7 pi
On 08/01/2019 13:22, Peng Fan wrote:
Hi Bryan,
-Original Message-
From: Bryan O'Donoghue [mailto:bryan.odonog...@linaro.org]
Sent: 2019年1月3日 9:45
To: u-boot@lists.denx.de
Cc: Fabio Estevam ; Peng Fan
; Bryan O'Donoghue ;
Albert Aribaud ; Stefano Babic
Subject: [PATCH 3/8] arm: imx7s-
Setup proper DM_I2C dependency.
Signed-off-by: Michal Simek
---
drivers/i2c/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 1ef22e6bcde2..09079e02d2ca 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -453,6 +453,7 @@ confi
Updates i2c muxes drivers to support livetree.
Similar changes were done by:
"net: zynq_gem: convert to use livetree"
(sha1: 26026e695afa794ac018a09e79a48120d322b60d)
Signed-off-by: Michal Simek
---
drivers/i2c/muxes/i2c-mux-uclass.c | 4 +---
drivers/i2c/muxes/pca954x.c| 2 +-
2 files
Hello Tom,
Am 08.01.2019 um 15:33 schrieb Tom Rini:
On Tue, Jan 08, 2019 at 12:33:06PM +0100, Heiko Schocher wrote:
Hello Tom,
please pull from u-boot-i2c.git master
The following changes since commit 53240275666acf32cb9811e44eaf2fd571a6cb75:
Merge tag 'for-v2019.01' of git://git.denx.de/
Hi Horatiu,
On mer., janv. 09 2019, Horatiu Vultur wrote:
> Add device tree based on evaluation board pcb110.
>
> Signed-off-by: Horatiu Vultur
> ---
> MAINTAINERS | 1 +
> arch/mips/dts/jr2_pcb110.dts | 74 +
> arch/mips/dts/mscc,jr2.dtsi | 187
> ++
On 22/12/18 1:13 PM, Simon Goldschmidt wrote:
> Am 21.12.2018 um 14:29 schrieb Simon Goldschmidt:
>> Am 21.12.2018 um 12:11 schrieb Vignesh R:
>>> Hi Simon,
>>> [...]
Hi Vignesh,
I just did a quick test on this but it fails to boot. I guess this could
be a size problem.
>
On 17/12/18 7:02 PM, Vignesh R wrote:
> In arch/sandbox/include/asm/types.h we have
> Therefore for 32 bit Sandbox build BITS_PER_LONG turns out to be 32 as
> CONFIG_PHYS64 is not set
>
> This messes up the current logic of GENMASK macro due to mismatch b/w
> size of unsigned long (64 bit) and t
On 15.11.18 05:58, AKASHI Takahiro wrote:
> Logically, details on u-boot block device used to implement efi file
> protocol are mostly unnecessary, as well as being duplicated, in
> efi_file structure.
> Moreover, a newly introduced flag, _EFI_DISK_FLAG_INVALID, should be
> honored in any file op
On 13.12.18 08:58, AKASHI Takahiro wrote:
> Heinrich,
>
> On Tue, Dec 11, 2018 at 08:55:41PM +0100, Heinrich Schuchardt wrote:
>> On 11/15/18 5:58 AM, AKASHI Takahiro wrote:
>>> Currently, efi_init_obj_list() scan disk devices only once, and never
>>> change a list of efi disk devices. This will
On 09/01/2019 03:44, Tom Rini wrote:
> On Mon, Dec 17, 2018 at 10:05:45AM +, Andre Przywara wrote:
>
>> Commit d0851c893706 ("blk: Call part_init() in the post_probe() method")
>> removed the call to part_init() in mmc.c, as this is done by the DM_MMC
>> framework.
>> However Allwinner is (sti
Create sysreset driver for Jaguar2 SOC family and update defconfig
to use it.
Signed-off-by: Horatiu Vultur
---
MAINTAINERS | 1 +
board/mscc/jr2/jr2.c| 8 +++
configs/mscc_jr2_defconfig | 2 ++
drivers/sysreset/Kconfig| 6 ++
drivers/sysr
Add device tree based on evaluation board pcb112.
Signed-off-by: Horatiu Vultur
---
MAINTAINERS | 1 +
arch/mips/dts/serval2_pcb112.dts | 60
2 files changed, 61 insertions(+)
create mode 100644 arch/mips/dts/serval2_pcb112.dts
dif
Add board support and configuration for Jaguar2 SOC family.
The detection of the board type in this family is based on the phy ids.
Signed-off-by: Horatiu Vultur
---
arch/mips/dts/Makefile | 1 +
arch/mips/mach-mscc/Makefile | 5 +-
board/mscc/common/Makefile | 4 ++
board/mscc/com
Add device tree based on evaluation board pcb111.
Signed-off-by: Horatiu Vultur
---
arch/mips/dts/jr2_pcb111.dts | 74
1 file changed, 74 insertions(+)
create mode 100644 arch/mips/dts/jr2_pcb111.dts
diff --git a/arch/mips/dts/jr2_pcb111.dts b/arch/
Add device tree based on evaluation board pcb110.
Signed-off-by: Horatiu Vultur
---
MAINTAINERS | 1 +
arch/mips/dts/jr2_pcb110.dts | 74 +
arch/mips/dts/mscc,jr2.dtsi | 187 +++
3 files changed, 262 insertions(+)
crea
As the Ocelot and Luton SoCs, this family of SoCs are found
in Microsemi Switches solution.
Signed-off-by: Horatiu Vultur
---
arch/mips/mach-mscc/Kconfig| 9 +
arch/mips/mach-mscc/cpu.c | 7 +
arch/mips/mach-mscc/dram.c
The Jaguar2 SOC family has 63 gpio pins therefore I extended mscc-common
to support new numbe of pins and remove any platform dependency from
mscc-common.
Signed-off-by: Horatiu Vultur
---
MAINTAINERS | 1 +
drivers/pinctrl/mscc/Kconfig | 9 +
drivers/pinct
This patch series add support for MSCC Jaguar2 SOC family. In this
family there are the following boards: Jagaur2(pcb110),
Jaguar2-48(pcb111) and Serval2(pcb112).
This is based off the u-boot-mips/next repository
This version address comments from Daniel Schwierzeck
v3-changes:
- remove any ta
On 09.01.19 09:35, Heinrich Schuchardt wrote:
>
>
> On 1/8/19 2:05 PM, Alexander Graf wrote:
>>
>>
>> On 28.12.18 12:41, Heinrich Schuchardt wrote:
>>> If we want to properly unload images in Exit() the memory should always be
>>> allocated in the same way. As we allocate memory when reading fr
Hi Simon,
> -Original Message-
> From: Simon Goldschmidt [mailto:simon.k.r.goldschm...@gmail.com]
> Sent: Tuesday, January 8, 2019 12:14 AM
> To: Marek Vasut
> Cc: Simon Goldschmidt ; Patrice Chotard
> ;
> Simon Glass ; Anup Patel ; Lokesh
> Vutla ;
> Alexey Brodkin ; Patrick Delaunay
On 1/8/19 2:05 PM, Alexander Graf wrote:
>
>
> On 28.12.18 12:41, Heinrich Schuchardt wrote:
>> If we want to properly unload images in Exit() the memory should always be
>> allocated in the same way. As we allocate memory when reading from file we
>> should do the same when the original image
CONFIG_DW_SERIAL is no longer used anywhere so let's forget about it.
Signed-off-by: Alexey Brodkin
Cc: Tom Rini
Cc: Adam Ford
Cc: Mario Six
Cc: Tuomas Tynkkynen
Cc: Alex Kiernan
Cc: Simon Glass
Cc: "Jörg Krause"
Cc: Stephen Warren
---
include/configs/axs10x.h | 1 -
include/configs/
Hi Daniel,
First, thank you for all the feedback.
I have created a new patch series that will fix the issue that you
addressed bellow but the fix it would not use compatible string, because
that presume that I need to change the other pinctrl-drivers(ocelot, luton).
I was thinking if it is OK the
101 - 142 of 142 matches
Mail list logo