In the UEFI context GUIDs are expected to be rendered in upper case.
The patch uses the formerly unused bit 1 of the parameter str_format
of function uuid_bin_to_str() to indicate if we need upper or lower case
output.
Function uuid_string() in vsprint.c is adjusted to correctly set the bit
depen
common.h already includes uuid.h
Signed-off-by: Heinrich Schuchardt
---
lib/vsprintf.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 2403825dc9..3502b8088f 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -16,7 +16,6 @@
#include
#include
#includ
On 4/28/19 10:47 PM, Jagan Teki wrote:
If configured target has broken config enabled, trigger a warning
saying that the desired .config has broken configuration.
Cc: Heinrich Schuchardt
Signed-off-by: Jagan Teki
---
Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Makefile b
On 4/28/19 10:47 PM, Jagan Teki wrote:
Add bool text to describe what configurations is this for.
Update help text to describe the example use-case configs
which comes under CONFIG_BROKEN, they are
- legacy driver that would need dm conversion.
- legacy driver that doesn't have proper update sin
On 28.04.19 11:38, Weijie Gao wrote:
The MediaTek MT7620 and MT7628 SoCs are different.
Although they use the same memory controller, the lowlevel code (CPU PLL)
and other peripherals they use are totally different. Which means they
should use seperate mach directories.
s/seperate/separate
Cu
From: Brad Griffis
for suspend/resume robustness
update value for ext_phy_ctrl_36 for suspend/resume robustness
with hardware leveling enabled.
Match recommended values from EMIF Tools app note:
http://www.ti.com/lit/an/sprac70/sprac70.pdf
Signed-off-by: Brad Griffis
Signed-off-by: Keerthy
From: Brad Griffis
Adjust DQS skew in case where invert_clkout=1 is used.
Match recommended values from EMIF Tools app note:
http://www.ti.com/lit/an/sprac70/sprac70.pdf
Signed-off-by: Brad Griffis
Signed-off-by: Keerthy
---
arch/arm/mach-omap2/am33xx/ddr.c | 12 ++--
1 file changed,
From: Brad Griffis
Remove the RDLVL_MASK, RDLVLGATE_MASK, WRLVL_MASK & enable
PHY_INVERT_CLKOUT to enable Hardware leveling for am437x
as recommended by EMIF Tools app note:
http://www.ti.com/lit/an/sprac70/sprac70.pdf
Signed-off-by: Brad Griffis
Signed-off-by: Keerthy
---
board/ti/am43xx/bo
From: Brad Griffis
Add 1ms delay to avoid L3 timeout error during suspend resume.
Signed-off-by: Brad Griffis
Signed-off-by: Keerthy
---
arch/arm/mach-omap2/am33xx/ddr.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c
The series adds the support for hardware leveling. This needs the
kernel to be patched with hardware leveling support and the
kernel support is already in linux-next:
https://patchwork.kernel.org/project/linux-omap/list/?series=100273
Match recommended values from EMIF Tools app note:
http://www.
From: Brad Griffis
Enable HW leveling in RTC+DDR path. The mandate is to enable
HW leveling bit and then wait for 1 ms before accessing any
register.
Signed-off-by: Brad Griffis
Signed-off-by: Keerthy
---
arch/arm/mach-omap2/am33xx/board.c | 30 +-
1 file changed,
From: Brad Griffis
In case of RTC+DDR resume, need to restore EMIF context
before initiating hardware leveling.
Signed-off-by: Brad Griffis
[j-keer...@ti.com Fixed the am335x build issues]
Signed-off-by: Keerthy
---
Changes in v2:
* Added the am43xx specific changes under #ifdef
arch/arm
On 26/04/19 6:51 PM, Jean-Jacques Hiblot wrote:
> The size of the SPL for the am335x_evm is constrained. There is no need
> to have advanced SPL FIT features, so keep the SPL FIT support tiny.
>
> Signed-off-by: Jean-Jacques Hiblot
Reviewed-by: Lokesh Vutla
Thanks and regards,
Lokesh
>
> -
On 26/04/19 6:51 PM, Jean-Jacques Hiblot wrote:
> FIT_IMAGE_TINY is used to reduce the size of the SPL by removing os-type
> tracking and recording the loadables into the loaded FDT. When this option
> is enabled, it is assumed that the next stage firmware is u-boot.
> However this does not play
Auer, Lukas 於 2019年4月26日 週五 上午4:58寫道：
>
> On Thu, 2019-04-25 at 09:00 +0800, Rick Chen wrote:
> > Bin Meng 於 2019年4月24日 週三 下午3:02寫道：
> > > On Wed, Apr 24, 2019 at 2:38 PM Andes wrote:
> > > > From: Rick Chen
> > > >
> > > > This patch will fix prior_stage_fdt_address write failure problem, when
Hi Lukas
Auer, Lukas 於 2019年4月26日 週五 上午4:56寫道：
>
> Hi Rick,
>
> On Wed, 2019-04-24 at 14:33 +0800, Andes wrote:
> > From: Rick Chen
> >
> > Add two defconfigs to support AE350 SMP booting from flash.
> >
> > Signed-off-by: Rick Chen
> > Cc: Greentime Hu
> > ---
> > configs/ae350_rv32_xip_defc
On Mon, 2019-04-29 at 08:50 +0800, Weijie Gao wrote:
> On Sun, 2019-04-28 at 17:30 +0530, Jagan Teki wrote:
> > On Sun, Apr 28, 2019 at 6:54 AM Weijie Gao wrote:
> > >
> > > On Sat, 2019-04-27 at 21:38 +0530, Jagan Teki wrote:
> > > > On Fri, Apr 26, 2019 at 2:53 PM Weijie Gao
> > > > wrote:
> >
Hi Lukas
Auer, Lukas 於 2019年4月26日 週五 上午4:55寫道：
>
> Hi Rick,
>
> Bin already included excellent feedback, I have just one more small nit
> below.
>
> On Wed, 2019-04-24 at 14:33 +0800, Andes wrote:
> > From: Rick Chen
> >
> > In smp flow these two features only can be enabled when U-Boot
> > boot
Hi Karsten
> From: Karsten Merker [mailto:mer...@debian.org]
> Sent: Friday, April 26, 2019 5:35 PM
> To: Rick Jian-Zhi Chen(陳建志)
> Cc: Anup Patel; Bin Meng; Lukas Auer; Tom Rini; U-Boot Mailing List; Palmer
> Dabbelt
> Subject: Re: [U-Boot] [PATCH] riscv: qemu: Use correct SYS_TEXT_BASE for
> S-m
> Subject: [PATCH v5 1/2] imx: fix building for i.mx8 without spl
>
> From: Marcel Ziswiler
>
> Building with Travis CI complained and stopped with the following error:
> +cc1: fatal error: opening output file spl/u-boot-spl.cfgout: No such
> file or directory
> +compilation terminated.
>
> Thi
On Sun, 2019-04-28 at 17:30 +0530, Jagan Teki wrote:
> On Sun, Apr 28, 2019 at 6:54 AM Weijie Gao wrote:
> >
> > On Sat, 2019-04-27 at 21:38 +0530, Jagan Teki wrote:
> > > On Fri, Apr 26, 2019 at 2:53 PM Weijie Gao
> > > wrote:
> > > >
> > > > This patch adds spi-mem driver for MediaTek MT7629 S
On Sat, Apr 27, 2019 at 10:08:34PM +0200, Simon Goldschmidt wrote:
>
>
> On 22.04.19 23:00, Tom Rini wrote:
> >On Mon, Apr 22, 2019 at 11:50:22PM +0300, Vladimir Zapolskiy wrote:
> >>Hi Jagan, Tom,
> >>
> >>On 04/19/2019 09:48 AM, Jagan Teki wrote:
> >>>Dropped
> >>>- lpc32xx_ssp driver
> >>>- CO
This series fixes building for i.MX8 without SPL and adds support for
more lpuart instances, cleans-up and extends the Toradex SKU handling
and last but not least introduces support for the Toradex Colibri
iMX8QXP 2GB WB IT V1.0B module.
This series is available together with the last few clean-u
From: Marcel Ziswiler
This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB
IT V1.0B module. Unlike the V1.0A early access samples exclusively
booting from SD card, they are now strapped to boot from eFuses which
are factory fused to properly boot from their on-module eMMC. U-Bo
From: Marcel Ziswiler
Building with Travis CI complained and stopped with the following error:
+cc1: fatal error: opening output file spl/u-boot-spl.cfgout: No such
file or directory
+compilation terminated.
This fixes commit caceb739ea07 ("imx: build flash.bin for i.MX8") which
took SPL being e
> Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common
> header file path, so that we can get the correct path directly.
>
> Signed-off-by: Kever Yang
> ---
>
> .../include/asm/arch-rockchip/ddr_rk3188.h| 2 +-
> arch/arm/mach-rockchip/Kconfig| 2 +-
> arch/arm/ma
On Sun, 2019-04-28 at 14:24 -0400, Joe Hershberger wrote:
> > On Apr 28, 2019, at 12:52 PM, Stefano Babic wrote:
> >
> >
> >
> > > On 27/04/19 01:58, Peng Fan wrote:
> > > Hi Marcel,
> > >
> > > Please apply this patch, Joe has not pick it up.
> > > https://patchwork.ozlabs.org/patch/1085432/
Hello Simon,
Thank you for the repply.
>> You probably should use mrproper here, not distclean?
I do agree, mrproper should be used.
>> So what's $CC set to? I don't think you need ARCH=arm, works without that
>> for me.
Sorry, I forgot to say that ${CC} is pointig to Linaro gcc folder.
>>So SPL
The DA850 EVM has one USB 1.1 OHCI Host controller. With the
host controller now support DM_USB, this patch enables
the respective functions for the da850evm.
Signed-off-by: Adam Ford
diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig
index ee39b0b1bc..1845813b2e 100644
--- a/
This patch reuses some former code for the hawkboard, combines it
with some some similar DM_USB compatible code for the OHCI driver,
and enables the use of the da850's OHCI controller with DM_USB
compatibility.
Signed-off-by: Adam Ford
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kco
There are a few functions defined in the header file, but they are
not referenced by any Davinci code. In order to make a general
function in the future with static function declarations, this
patch will remove the references all together.
Signed-off-by: Adam Ford
diff --git a/arch/arm/mach-dav
From 323b5ea0eec7aac821eb2319ca0debda711e8bec Mon Sep 17 00:00:00 2001
From: Adam Ford
Date: Sun, 28 Apr 2019 16:42:42 -0500
Subject: [PATCH 0/4] Enable Host OHCI USB controller wtih DM_USB
This series enables some commented-out code, resurrects some older code
and enables DA850 OHCI USB Host co
There is a delay function that was commented out. This patch
re-enables it, because it will be needed for da850 ohci support.
Signed-off-by: Adam Ford
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 3b6f889f7b..2b0df88f49 100644
--- a/drivers/usb/host/ohci-hcd.c
+++
Hi Peng,
On Thu, 25 Apr 2019 at 02:37, Peng Fan wrote:
>
> Hi Simon,
>
> We have such piece dtb in device tree, however with SPL_OF_PLATDATA, it
> failed to compile.
> It could not correct get address-cells/size-cells from cpus node. Actually
> It not find the address-cell/size-cell property fro
Hi Urja,
On Fri, 26 Apr 2019 at 04:47, Urja Rannikko wrote:
>
> Hi,
>
> On Wed, Apr 24, 2019 at 3:54 AM Simon Glass wrote:
> >
> > Hi,
> >
> > On Wed, 3 Apr 2019 at 06:21, Urja Rannikko wrote:
> > >
> > > Based on snooping around the linux kernel rk8xx driver, and
> > > tested to work on the AS
Hi Urja,
On Fri, 26 Apr 2019 at 04:26, Urja Rannikko wrote:
>
> Hi Simon,
>
> On Wed, Apr 24, 2019 at 3:54 AM Simon Glass wrote:
> >
> > Hi Urja,
>
> >
> > Could we add a Kconfig to control this? Other devices shouldn't have this
> > code.
> I suppose i can do that... but I will need to know a
On Fri, 26 Apr 2019 at 10:39, Heinrich Schuchardt wrote:
>
> display_options_get_banner_priv() overwrites bytes before the start of the
> buffer if the buffer size is less then 3. This case occurs in the Sandbox
> when executing the `ut_print` command.
>
> Correctly handle small buffer sizes. Adju
Mark MXS_SPI has BROKEN, this so the resulting build shows
warning for broken configuration enabled and associated code
will remove in v2019.07 release.
Cc: Marek Vasut
Cc: Fabio Estevam
Cc: Michael Trimarchi
Signed-off-by: Jagan Teki
---
drivers/spi/Kconfig | 1 +
1 file changed, 1 insertion
Mark FSL_ESPI has BROKEN, this so the resulting build shows
warning for broken configuration enabled and associated code
will remove in v2019.07 release.
Cc: Oleksandr Zhadan and Michael Durrant
Signed-off-by: Jagan Teki
---
drivers/spi/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git
Mark SH_SPI has BROKEN, this so the resulting build shows
warning for broken configuration enabled and associated code
will remove in v2019.07 release.
Signed-off-by: Jagan Teki
---
drivers/spi/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
If configured target has broken config enabled, trigger a warning
saying that the desired .config has broken configuration.
Cc: Heinrich Schuchardt
Signed-off-by: Jagan Teki
---
Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Makefile b/Makefile
index 66a09ac900..02c9a73d33 1006
Add bool text to describe what configurations is this for.
Update help text to describe the example use-case configs
which comes under CONFIG_BROKEN, they are
- legacy driver that would need dm conversion.
- legacy driver that doesn't have proper update since
from the releases.
Cc: Heinrich Sch
Mark LPC32XX_SSP has BROKEN, this so the resulting build shows
warning for broken configuration enabled and associated code
will remove in v2019.07 release.
Cc: Vladimir Zapolskiy
Cc: Albert ARIBAUD
Signed-off-by: Jagan Teki
---
drivers/spi/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff -
We have a warning text for non dm converted spi drivers,
but the plan is to mark all these respetive drivers into
CONFIG_BROKEN.
So, trigger a warning saying that these driver configurations
and associated code will remove in v2019.07 (earlier plan is
to remove it from v2019.04)
Signed-off-by: Ja
Mark SOFT_SPI has BROKEN, this so the resulting build shows
warning for broken configuration enabled and associated code
will remove in v2019.07 release.
Cc: Vasily Khoruzhick
Signed-off-by: Jagan Teki
---
drivers/spi/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/spi/Kconf
We have trigger a zap patches about the legacy spi driver
which are not converted into dm, but the seems like most
of the associated developers are unaware about the migration
plan for SPI.
So, as per Tom request and make the removal smooth mark
these non-dm drivers into BROKEN. The configs which
From: Mario Six
Replace the function name with a "%s" format string and the __func__
variable in debug statements (as proposed by checkpatch).
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 9 +
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/mpc8xxx
From: Mario Six
Minize the time the adapter is disabled (via SPI_MODE_EN
clearing/setting) to just the character length setting, and only set up
the temporary data writing variable right before we need it, so there is
a more clear distinction between setting up the SPI adapter, and setting
up the
From: Mario Six
Accesses to the register map are currently done by directly reading and
writing the structure.
Switch to the appropriate IO accessors instead.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 38 +++---
1 file changed, 19 insertions(+),
From: Mario Six
There are some comments on the same line as the code they document. Put
comments above the code lines they document, so the line length is not
unnecessarily increased.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 22 ++
1 file changed, 14 inserti
Now, we have few driver are fully converted into dm and few
are partially converted.
So, update the migration status accordingly.
Signed-off-by: Jagan Teki
---
doc/driver-model/MIGRATION.txt | 6 +-
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/doc/driver-model/MIGRATION.txt
From: Mario Six
Decreasing the bit length and increasing the write data pointer should
be done when there are more than 32 bit of data, not 16 bit.
This did not produce incorrect behavior, because the only time where the
two checks produce different outcomes is the case of 16 < bitlen < 32,
and
Support DM in the MPC8xxx SPI driver, and remove the legacy SPI
interface.
Signed-off-by: Mario Six
Signed-off-by: Jagan Teki
---
drivers/spi/Kconfig | 10 +--
drivers/spi/mpc8xxx_spi.c | 144 --
2 files changed, 112 insertions(+), 42 deletions(-)
dif
From: Mario Six
Instead of having a nested if block, just have two branches within the
overarching if block to eliminate one nesting level.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 12 +---
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/mpc8xx
From: Mario Six
Fix all "superfluous space after case" style errors.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 0393765b6f..1424e7febe 100644
--- a/
From: Mario Six
The transmission loop starts with setting some variables, which are only
used inside the loop. Reduce the scope to the loop to make the
declaration and initialization of these variables coincide.
In the case of char_size this also always initializes the variable
immediately with
From: Mario Six
Instead of having a table right before the code implementing the length
setting for documentation, have inline comments for the if branches
actually implementing the length setting described table's entries
(which is readable thanks to the set_char_len function).
Signed-off-by: M
> Prefer to use structure to access register if we can.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk3288/rk3288.c | 6 --
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing l
> Prefer to use structure to access register if we could.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk3399/rk3399.c | 5 -
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing l
From: Mario Six
Replace pre-processor defines with proper enums, and use the BIT macro
where applicable.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 26 +++---
1 file changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/sp
From: Mario Six
The function signatures in the driver are quite long as is. Use short
type names (uint etc.) to make them more readable.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 12 +---
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/mpc8xxx_s
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file for all rockchip SoCs later.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-ro
From: Mario Six
We do nothing in the loop if the "not empty" event was not detected. To
simplify the logic, check if this is the case, and skip the execution of
the loop early to reduce the nesting level and flag checking.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 23 +++
From: Mario Six
There are three variables that have camel-case names, which is not the
preferred naming style.
Give those variables more compliant names instead.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 22 +++---
1 file changed, 11 insertions(+), 11 deletions(
From: Mario Six
The comment before the transmission loop in conjunction with the
definition of SPI_TIMEOUT as 1000 implies that the loop is supposed to
have a timeout value of 1000 ms. But since there is no mdelay(1) or
similar in the loop body, the loop just runs 1000 times, without regard
for t
From: Mario Six
The variable "char_size" holds the number of bits to be transferred in
the current loop iteration. A better name would be "xfer_bitlen", which
we rename this variable to.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 8
1 file changed, 4 insertions(+), 4 del
This would be next version mpc8xxx dm conversion.
No functional changes in v2 apart from rebase, and this would
merge soon.
Changes for v2:
- rebase on master
- patch for SPI MIGRATION status
Any inputs?
Jagan.
Jagan Teki (2):
spi: mpc8xxx: Convert to DM
dm: MIGRATION: Update migration stat
From: Mario Six
Get rid of the is_read variable, and just keep the state of the "not
empty" and "not full" events in two boolean variables within the loop
body.
Signed-off-by: Mario Six
---
drivers/spi/mpc8xxx_spi.c | 12 +++-
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git
From: Mario Six
Introduce the to_prescale_mod and set_char_len inline functions to make
the code more readable.
Note that the added "if (bitlen > 16)" check does not change the
semantics of the current code, and hence only preserves the current
error (this will be fixed in a later patch in the s
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file for all rockchip SoCs later.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-ro
> Move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file later for all rockchip SoCs.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk3368-board-spl.c | 8 --
> arch/arm/mach-rockchip/rk3368-board-tpl.c | 33
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk3188-board-spl.c |
> Move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file later for all rockchip SoCs.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk322x-board-spl.c | 44 ++-
> arch/arm/mach-rockchip/rk322x-
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/mach-rockchip/rk3036-board-spl.c |
> Enable debug uart for kylin board in defconfig.
>
> Signed-off-by: Kever Yang
> ---
>
> configs/kylin-rk3036_defconfig | 4
> 1 file changed, 4 insertions(+)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https:/
> All Rockchip SoCs use DEBUG_UART_BOARD_INIT to init per board
> UART IOMUX, enable it by default.
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/Kconfig | 1 +
> arch/arm/mach-rockchip/Kconfig | 4
> 2 files changed, 1 insertion(+), 4 deletions(-)
>
Reviewed-by: Philipp
> This updates MAINTAINERS and git-mailrc to add me as a
> co-custodian for rockchip
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> Acked-by: Philipp Tomsich
> Acked-by: Jagan Teki
> Acked-by: Tom Rini
> ---
>
> MAINTAINERS| 1 +
> doc/git-mailrc | 3 ++-
> 2 files chang
> On Apr 28, 2019, at 12:52 PM, Stefano Babic wrote:
>
>
>
>> On 27/04/19 01:58, Peng Fan wrote:
>> Hi Marcel,
>>
>> Please apply this patch, Joe has not pick it up.
>> https://patchwork.ozlabs.org/patch/1085432/
>>
>> Stefano,
>>
>> Would you pick it up?
>
> It is acked by Joe, i assign
On 4/26/19 2:44 AM, AKASHI Takahiro wrote:
Currently in do_efi_boot_dump(), we directly read EFI variables from
related environment variables. To accommodate alternative storage
backends, we should switch to using the UEFI API instead.
Signed-off-by: AKASHI Takahiro
Reviewed-by: Heinrich Schu
On 27/04/19 01:58, Peng Fan wrote:
> Hi Marcel,
>
> Please apply this patch, Joe has not pick it up.
> https://patchwork.ozlabs.org/patch/1085432/
>
> Stefano,
>
> Would you pick it up?
It is acked by Joe, i assign the patch to me in patchwork and I pick it up.
Regards,
Stefano
>
>
>> Sub
Hi Marek,
On Thu, Apr 25 2019, Marek Behún wrote:
> The i2c slave disabling is done by mvtwsi driver and is not needed here.
>
> Signed-off-by: Marek Behún
> Cc: Baruch Siach
> ---
> board/CZ.NIC/turris_omnia/turris_omnia.c | 11 ---
> 1 file changed, 11 deletions(-)
>
> diff --git a/bo
On Sun, Apr 28, 2019 at 6:54 AM Weijie Gao wrote:
>
> On Sat, 2019-04-27 at 21:38 +0530, Jagan Teki wrote:
> > On Fri, Apr 26, 2019 at 2:53 PM Weijie Gao wrote:
> > >
> > > This patch adds spi-mem driver for MediaTek MT7629 SoC to access SPI-NOR
> > > and SPI-NAND flashes.
> > >
> > > Cc: Jagan T
> From: Jagan Teki
> Date: Sun, 28 Apr 2019 14:38:06 +0530
>
> On Sat, Apr 27, 2019 at 6:17 PM Emmanuel Vadot wrote:
> >
> >
> > Hi Jagan,
> >
> > On Sun, 21 Apr 2019 22:42:45 +0530
> > Jagan Teki wrote:
> >
> > > On Tue, Feb 5, 2019 at 4:24 PM Emmanuel Vadot wrote:
> > > >
> > > > Other make
`if (!strncmp(dev->name, name, strlen(name)))` might find out
the wrong device, it might find out `dram_pll_ref_sel`, when name is
`dram_pll`. So use strcmp to avoid such issue.
Signed-off-by: Peng Fan
---
drivers/core/uclass.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/
The MediaTek MT7620 and MT7628 SoCs are different.
Although they use the same memory controller, the lowlevel code (CPU PLL)
and other peripherals they use are totally different. Which means they
should use seperate mach directories.
Currently the mach mt7620 contains only architecture code of MT7
Sometimes u-boot specific dts nodes or properties can use
from config macros from respective rockchip family include/configs
files, example CONFIG_SPL_PAD_TO.
So, it's better to compile the dtbs based on the respective
rockchip family types rather than rockchip itself to avoid
compilation issues.
RK3399 platform has two stage boot loaders like SPL and
U-Boot proper. For each stage we need to burn the image
on to flash with respective offsets.
This patch create a single image using binman, so that
user can get rid of burning different stage boot images.
without this patch:
Add u-boot.itb BUILD_TARGET for Rockchip platform when SPL_LOAD_FIT
is being used.
This can get rid of building itb explicitly with 'make u-boot.itb'
so, from now all required images will build just by make.
Signed-off-by: Jagan Teki
---
Kconfig | 2 +-
doc/README.rockchip | 2 --
2
Rockchip platform has its python script that would generate various
bl31_*bin for creating u-boot.itb file by taking bl31.elf as input.
These bl31_*.bin files are generated in u-boot root directory and
have no rule to clean it up. so add support for it by adding in
command entry of clean target in
Right now puma rk3399 board need to copy bl31-rk3399.bin and
rk3399m0.bin into u-boot source directory to make use of building
u-boot.itb.
So, add environment variable
- BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
platform BL31 env)
- PMUM0 for rk3399m0.bin
If the bui
Rockchip platform would require an explicit call to mkimage for
creating bootable images which indeed specific to SoC family
along with boot devices.
Example of creating bootable image for rk3399 family with SD
boot device as
₹ mkimage -n rk3399 -T rksd -d ./spl/u-boot-spl-dtb.bin u-boot-spl-rock
Right now rockchip platform need to copy bl31.elf into u-boot
source directory to make use of building u-boot.itb.
So, add environment variable BL31 like Allwinner SoC so-that the
bl31.elf would available via BL31.
If the builds are not exporting BL31 env, the make_fit_atf.py
explicitly create du
On Sat, Apr 27, 2019 at 6:17 PM Emmanuel Vadot wrote:
>
>
> Hi Jagan,
>
> On Sun, 21 Apr 2019 22:42:45 +0530
> Jagan Teki wrote:
>
> > On Tue, Feb 5, 2019 at 4:24 PM Emmanuel Vadot wrote:
> > >
> > > Other make_fit script (like imx or sunxi) use the BL31 environment
> > > variable to indicate t
Currently rockchip platform is using explicit 'make u-boot.itb' for
building u-boot.itb but if we enable CONFIG_BUILD_TARGET as 'u-boot.itb'
then the resulting u-boot.itb directly will create by make.
But, that indeed make travis build fail since it require python-pyelftools
host package.
So add
binman tools for creating single image build will create image.map
at the end, which has information about binman image node details.
current u-boot, is unable to clean this image.map so add a command
entry in clean target in Makefile.
Signed-off-by: Jagan Teki
---
Makefile | 3 ++-
1 file chan
This is v2 for previous series[1] to create single bootable image
using binman for rk3399 platform.
This series resolved the travis-ci build issuesi[2] which were listed
in previous series.
Series introduce BL31 env for exporting bl31.elf, If the builds
are not exporting BL31 env, the make_fit_a
was going over README.kconfig and noticed these references:
$ grep -r autoconfig.mk *
doc/README.kconfig: - spl/include/autoconfig.mk(generated by the old
config for SPL)
doc/README.kconfig: - tpl/include/autoconfig.mk(generated by the old
config for TPL)
doc/README.kconfig:
erase also the redundant environment location if offset is defined
this is a possible implementation without adding additional parameter
to env erase command
Signed-off-by: Frank Wunderlich
---
cmd/nvedit.c | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/cmd/nvedit.c
On Sat, Apr 27, 2019 at 5:19 PM Jagan Teki wrote:
>
> Add initial support for Nanopc T4 board.
>
> Specification
> - Rockchip RK3399
> - Dual-Channel 4GB LPDDR3-1866
> - SD card slot
> - 16GB eMMC
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI, eDP
> - USB 3.0, 2.0
> - US
allow env erase on secondary offset using CONFIG_ENV_OFFSET_REDUND
Suggested-by: Simon Goldschmidt
Signed-off-by: Frank Wunderlich
---
cmd/nvedit.c | 2 +-
env/env.c | 4 ++--
env/mmc.c | 9 +++--
include/environment.h | 4 ++--
4 files changed, 12 insertion
1 - 100 of 105 matches
Mail list logo
