Le 22/01/2020 à 13:06, Anand Moon a écrit :
> As per mainline line kernel fix the clk tunig phase for
> mmc, set Core=180, Tx=180, Rx=0 clk phase for mmc initialization.
> As per S905X and S922X datasheet set the default values
> for clk tuning.
Please add you also add AXG/G12 setup.
>
>
Hi Tom,
Please pull the rockchip updates:
- Support redundant boot for rk3399
- Support binman for rockchip platform
- Update ram driver and add ddr4 support for rk3328
Travis:
https://travis-ci.org/keveryang/u-boot/builds/629913727
This PR remove the SF support in distro bootcmd.
Thanks,
-
Hi Wolfgang,
On Fri, 31 Jan 2020 at 01:18, Wolfgang Wallner
wrote:
>
> Hi Simon,
>
> > +Devices
> > +===
> > +
> > +Device bindings are described by their own individual binding files.
> > +
> > +U-Boot provides for some optional properties which are documented here.
> > +
> > + -
On Thu, Jan 30, 2020 at 07:27:57PM -0700, Simon Glass wrote:
> Hi Tom.
>
> On Thu, 30 Jan 2020 at 11:52, Tom Rini wrote:
> >
> > On Wed, Jan 29, 2020 at 07:17:09PM -0700, Simon Glass wrote:
> > > Hi Tom,
> > >
> > > On Thu, 23 Jan 2020 at 14:12, Tom Rini wrote:
> > > >
> > > > On Thu, Jan 23,
Hi Lukasz,
On 1/31/20 7:14 PM, Simon Glass wrote:
On Fri, 31 Jan 2020 at 06:39, Giulio Benetti
wrote:
Some device may enable CONFIG_CLK but not still support this clock in
CC, so better use debug() in place of dev_warn() otherwise a lot of
^^ this must be CCF. Can you correct commit log
On Fri, Jan 31, 2020 at 07:28:02PM +0100, Soeren Moch wrote:
>
>
> On 31.01.20 19:18, Stephen Warren wrote:
> > On 1/31/20 7:54 AM, Tom Rini wrote:
> >> On Fri, Jan 31, 2020 at 02:42:25PM +, Jon Hunter wrote:
> >>>
> >>> On 31/01/2020 14:05, Tom Rini wrote:
> On Fri, Jan 31, 2020 at
On 31.01.20 19:18, Stephen Warren wrote:
> On 1/31/20 7:54 AM, Tom Rini wrote:
>> On Fri, Jan 31, 2020 at 02:42:25PM +, Jon Hunter wrote:
>>>
>>> On 31/01/2020 14:05, Tom Rini wrote:
On Fri, Jan 31, 2020 at 01:24:21PM +, Jon Hunter wrote:
>
> On 31/01/2020 12:42, Soeren
On 1/31/20 7:54 AM, Tom Rini wrote:
On Fri, Jan 31, 2020 at 02:42:25PM +, Jon Hunter wrote:
On 31/01/2020 14:05, Tom Rini wrote:
On Fri, Jan 31, 2020 at 01:24:21PM +, Jon Hunter wrote:
On 31/01/2020 12:42, Soeren Moch wrote:
On 31.01.20 11:59, Jon Hunter wrote:
U-Boot supports
Hi Vignesh,
On Thu, 30 Jan 2020 at 22:12, Vignesh Raghavendra wrote:
>
> Hi Simon,
>
> On 31/01/20 7:57 am, Simon Glass wrote:
> > Hi Faiz,
> >
> > On Thu, 30 Jan 2020 at 08:22, Faiz Abbas wrote:
> >>
> >> Hi Simon,
> >>
> >> On 22/10/19 4:56 am, Simon Glass wrote:
> >>> With a bit of code
On Fri, 31 Jan 2020 at 06:39, Giulio Benetti
wrote:
>
> Some device may enable CONFIG_CLK but not still support this clock in
> CC, so better use debug() in place of dev_warn() otherwise a lot of
> boards will throw useless dev_warn()s.
>
> Signed-off-by: Giulio Benetti
> ---
>
Hi Wolfgang,
On Fri, 31 Jan 2020 at 00:47, Wolfgang Wallner
wrote:
>
> Hello Simon,
>
> -"Simon Glass" schrieb: -
> > On Wed, 22 Jan 2020 at 08:01, Wolfgang Wallner
> > wrote:
> > >
> > > The Interrupt Timer Subsystem (ITSS) is not specific to Apollo Lake, so
> > > move it to a common
On Fri, Jan 31, 2020 at 03:58:48PM +0100, David Abdurachmanov wrote:
> On Fri, Jan 31, 2020 at 3:42 PM Jon Hunter wrote:
> >
> >
> > On 31/01/2020 14:05, Tom Rini wrote:
> > > On Fri, Jan 31, 2020 at 01:24:21PM +, Jon Hunter wrote:
> > >>
> > >> On 31/01/2020 12:42, Soeren Moch wrote:
> > >>>
Hi Tom,
Please pull more updates.
This includes various Denali NAND driver improvements,
and a little bit UniPhier platform changes.
Thanks.
The following changes since commit b00c3c995bf2293e32cd2be3cb4be7eb39c4ac26:
Prepare v2020.04-rc1 (2020-01-28 16:59:30 -0500)
are available in the
On Thu, Jan 30, 2020 at 10:21 PM Masahiro Yamada
wrote:
>
> If the "source" command is not given the address, it uses
> CONFIG_SYS_LOAD_ADDR, which is compile-time determined.
>
> Using the "loadaddr" environment variable is handier because it is
> relocated according to the memory base when
On Thu, Jan 30, 2020 at 10:21 PM Masahiro Yamada
wrote:
>
> gd->ram_base is not set at all if the end address of the DRAM ch0
> exceeds 4GB.
>
> Signed-off-by: Masahiro Yamada
> ---
Applied to u-boot-uniphier.
>
> arch/arm/mach-uniphier/dram_init.c | 7 +--
> 1 file changed, 1
On Thu, Jan 30, 2020 at 12:57 AM Masahiro Yamada
wrote:
>
> Now that the reset controlling of the Denali NAND driver (denali_dt.c)
> works for this platform, remove the adhoc reset deassert code.
>
> Signed-off-by: Masahiro Yamada
> ---
Applied to u-boot-uniphier.
> Changes in v2:
> - more
On Thu, Jan 30, 2020 at 12:57 AM Masahiro Yamada
wrote:
>
> Currently, the denali NAND driver in U-Boot configures the
> SPARE_AREA_SKIP_BYTES based on the CONFIG option.
>
> Recently, Linux kernel merged a patch that associates the proper
> value for this register with the DT compatible string.
On Thu, Jan 30, 2020 at 12:57 AM Masahiro Yamada
wrote:
>
> When the reset signal is de-asserted, the HW-controlled bootstrap
> starts running unless it is disabled in the SoC integration.
> It issues some commands to detect a NAND chip, and sets up registers
> automatically. Until this process
On Fri, Jan 31, 2020 at 3:42 PM Jon Hunter wrote:
>
>
> On 31/01/2020 14:05, Tom Rini wrote:
> > On Fri, Jan 31, 2020 at 01:24:21PM +, Jon Hunter wrote:
> >>
> >> On 31/01/2020 12:42, Soeren Moch wrote:
> >>> On 31.01.20 11:59, Jon Hunter wrote:
> U-Boot supports loading a user
On Fri, Jan 31, 2020 at 02:42:25PM +, Jon Hunter wrote:
>
> On 31/01/2020 14:05, Tom Rini wrote:
> > On Fri, Jan 31, 2020 at 01:24:21PM +, Jon Hunter wrote:
> >>
> >> On 31/01/2020 12:42, Soeren Moch wrote:
> >>> On 31.01.20 11:59, Jon Hunter wrote:
> U-Boot supports loading a user
On 31/01/2020 14:05, Tom Rini wrote:
> On Fri, Jan 31, 2020 at 01:24:21PM +, Jon Hunter wrote:
>>
>> On 31/01/2020 12:42, Soeren Moch wrote:
>>> On 31.01.20 11:59, Jon Hunter wrote:
U-Boot supports loading a user environment from a file in the
file-system. Therefore to make it
Hi,
> From: Simon Glass
> Sent: jeudi 30 janvier 2020 03:18
>
> On Fri, 24 Jan 2020 at 05:34, Patrick Delaunay
> wrote:
> >
> > The "env info" can be use for test with -d and -p parameter, in
> > scripting case the output of the command is not needed.
> >
> > This patch allows to deactivate
On Fri, Jan 31, 2020 at 01:24:21PM +, Jon Hunter wrote:
>
> On 31/01/2020 12:42, Soeren Moch wrote:
> > On 31.01.20 11:59, Jon Hunter wrote:
> >> U-Boot supports loading a user environment from a file in the
> >> file-system. Therefore to make it easier for users to override the
> >> default
This fix the following issue on the imx8qm_rom7720 board:
Booting from net ...
Could not get PHY for FEC0: addr 0
Could not get PHY for FEC0: addr 0
Could not get PHY for FEC0: addr 0
Could not get PHY for FEC0: addr 0
Can't find FEC0 clk rate: -19
This fix is necessary because of the changes
Hi Lukasz,
On 1/28/20 9:20 AM, Lukasz Majewski wrote:
Hi Giulio,
Add support for PLLV3 AV type.
If this code has been ported from Linux kernel, then provide SHA1,
branch, and commit message.
Oh sorry,
Code taken from Linux with below commit:
"ARM: imx: add common clock support for pllv3"
Dear Simon,
In message <11b25950-50a3-c9cd-3c2d-5b2d65830...@gmail.com> you wrote:
>
> Hm, U-Boot's 'hsearch_r' does not conform to this 'standard' since
> December 2012, see these 2 commits from 2012 and 2019:
Argh. What shall I say... this should get fixed ?
> Obviously, my comments have no
Dear Tom,
In message <20200130153827.GY13379@bill-the-cat> you wrote:
>
> > way to him? I would have thought that mail got delivered directly.
>
> I was thinking about the setting on if you get your own messages / ones
> you're on CC to or not, and if that was the copy say in Michal's inbox
> or
Dear Simon,
In message
you wrote:
>
> Can this be a mailman issue? If Michal was CCed, is mailman involved in the
> way to him? I would have thought that mail got delivered directly.
Correct, it's the sender's MTA who handles the action transmission.
The question here is if there was actually
Some device may enable CONFIG_CLK but not still support this clock in
CC, so better use debug() in place of dev_warn() otherwise a lot of
boards will throw useless dev_warn()s.
Signed-off-by: Giulio Benetti
---
drivers/serial/serial_lpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Dear Tom,
In message <20200130153216.GX13379@bill-the-cat> you wrote:
>
> > > You misunderstood. I am not asking if you see Peng in the get_maintainer
> > > output. Do you see him CC'd in the original patch email?
> >
> > Nope. I can't see him there.
>
> Wolfgang, is there some mailman setting
On 31/01/2020 12:42, Soeren Moch wrote:
> On 31.01.20 11:59, Jon Hunter wrote:
>> U-Boot supports loading a user environment from a file in the
>> file-system. Therefore to make it easier for users to override the
>> default environment, add support to the 'distro_bootcmd' to look for
>> and
From: Robert Beckett
Remove legacy uart pad and iomux code
Enable DM serial and mxc uart
Signed-off-by: Robert Beckett
---
board/ge/bx50v3/bx50v3.c| 24
configs/ge_bx50v3_defconfig | 3 +++
include/configs/ge_bx50v3.h | 10 ++
3 files changed, 5
Configure `CONFIG_SYS_BOOTMAPSZ' per guidance on u-boot@lists.denx.de.
Signed-off-by: Ian Ray
---
include/configs/ge_bx50v3.h | 3 ++-
include/configs/mx53ppd.h | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
From: Robert Beckett
Add backlight and panel devicetree definitions
Use UCLASS_PANEL to enable backlight via display enable handler
Remove old explicit gpio code for handling backlight
Use cls command to initiate display in HW agnostic manner
Enable DM regulator and pwm
Signed-off-by: Robert
From: Robert Beckett
Use `test' command to test for file existence instead of relying on the
old functionality of the `ext2load' command (which now reports an error
when attempting to load a zero length file).
Signed-off-by: Robert Beckett
Signed-off-by: Ian Ray
---
From: Robert Beckett
Remove old (pre-DM) i2c setup code.
Enable DM i2c.
Convert common code to use DM rtc.
Convert common code to read VPD from eeprom partition.
Convert the generic i2c PMIC init code to use the new da9063 driver.
mx53ppd only:
Correct RTC compatible in device tree.
Enable MXC
From: Robert Beckett
Remove legacy iomux setup for fec.
Enable phylib and DM fec.
Use Kconfig for enabling fec.
Signed-off-by: Robert Beckett
---
board/ge/mx53ppd/mx53ppd.c | 26 --
configs/mx53ppd_defconfig | 3 +++
include/configs/mx53ppd.h | 8
3 files
Enable DM_VIDEO for mx53ppd.
Enable DM_REGULATOR_FIXED and DM_PWM for the backlight.
Remove unused MX53PPD_LCD_POWER.
Remove old (incorrect) setup_iomux_lcd.
Enable backlight via display enable handler.
Use cls command to initiate display in HW agnostic manner.
Modify `failbootcmd' to use lcdputs.
Override the panel compatible string for LCD in U-Boot.
Include U-Boot device tree overrides in device-specific device trees so
that the panel compatible string is used.
Fixes: 8c26739859c6 ("board: ge: bx50v3: sync devicetrees from Linux")
Signed-off-by: Ian Ray
---
From: Robert Beckett
Add eeprom partitions to device tree.
Signed-off-by: Robert Beckett
---
arch/arm/dts/imx53-ppd-uboot.dtsi| 16
arch/arm/dts/imx53-ppd.dts | 3 ++-
arch/arm/dts/imx6q-bx50v3-uboot.dtsi | 16
arch/arm/dts/imx6q-bx50v3.dtsi
From: Robert Beckett
Set the correct offset length and chip address offset mask for each
device to allow correct access to total capacity of the devices.
Signed-off-by: Robert Beckett
---
drivers/misc/i2c_eeprom.c | 35 +++
1 file changed, 35 insertions(+)
This series finishes the conversion to DM mode for drivers used
on GE boards.
The first patch adds the ability to specify partitions for eeprom in
the device tree, and query eeprom device sizes.
Each partition creates a child device, allowing board code to find the
eeprom parition by name.
This
Drop PPD_UART_PAD_CTRL since it matches defaults.
Enable DM serial and MXC uart.
Signed-off-by: Ian Ray
Signed-off-by: Robert Beckett
---
board/ge/mx53ppd/mx53ppd.c | 3 ---
board/ge/mx53ppd/ppd_gpio.h | 6 --
configs/mx53ppd_defconfig | 3 +++
include/configs/mx53ppd.h | 9 +
From: Robert Beckett
Add bootcount node, linking to i2c eeprom "bootcount" partitions for
storage.
Enable i2c eeprom bootcount backend storage.
Enable bootcount command and use it for failbootcmd.
Signed-off-by: Robert Beckett
---
arch/arm/dts/imx53-ppd-uboot.dtsi | 7 ++-
From: Robert Beckett
Add bootcount node, linking to i2c eeprom "bootcount" partitions for
storage.
Enable i2c eeprom bootcount backend storage.
Enable bootcount command and use it for failbootcmd.
Signed-off-by: Robert Beckett
---
arch/arm/dts/imx6q-bx50v3-uboot.dtsi | 7 ++-
On 31.01.20 11:59, Jon Hunter wrote:
> U-Boot supports loading a user environment from a file in the
> file-system. Therefore to make it easier for users to override the
> default environment, add support to the 'distro_bootcmd' to look for
> and load a user environment in a file called 'uEnv.txt'
U-Boot supports loading a user environment from a file in the
file-system. Therefore to make it easier for users to override the
default environment, add support to the 'distro_bootcmd' to look for
and load a user environment in a file called 'uEnv.txt' in the same
locations where an extlinux.conf
>-Original Message-
>From: U-Boot On Behalf Of Vikas Singh
>Sent: Thursday, January 23, 2020 11:22 AM
>To: Priyanka Jain ; u-boot@lists.denx.de
>Subject: [PATCH] lx2160a: Add the serdes configurtion details for QDS
Sp mistake in configuration. n
>
>Add 8_10_0 and 21_2_0 seredes protocol
Enable CONFIG_SPL_ETH_SUPPORT to fix ethernet boot support.
Signed-off-by: Faiz Abbas
---
configs/am43xx_evm_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index 2e64879beb..075c09b626 100644
---
The following patches fix ethernet boot in am437x-evm.
Faiz Abbas (2):
arm: dts: am437x-gp-evm: Add some nodes to u-boot.dtsi
configs: am43xx_evm: Enable SPL_ETH_SUPPORT
arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 16
configs/am43xx_evm_defconfig | 1 +
2 files
Add scm_conf syscon node and its parents as well as the ethernet phy
node to u-boot.dtsi. This enables ethernet boot.
Signed-off-by: Faiz Abbas
---
arch/arm/dts/am437x-gp-evm-u-boot.dtsi | 16
1 file changed, 16 insertions(+)
diff --git a/arch/arm/dts/am437x-gp-evm-u-boot.dtsi
building mtk ethernet driver for aarch64 (mt7622) results
in warnings/errors
"error: cast from pointer to integer of different size"
Fixes: 23f17164d9 ("ethernet: MediaTek: add ethernet driver for MediaTek
ARM-based SoCs")
Signed-off-by: Frank Wunderlich
---
changes since v2: change to ulong
Hi Sean,
> Hi Lukasz,
>
> On 1/29/20 7:29 PM, Lukasz Majewski wrote:
> >> Yes, but then clk_get_parent throws a fit, which gets called by
> >
> > Could you explain what "throw a fit" means here? I'm a bit
> > confused.
>
> Ok, so imagine I have a clk_divider in a composite clock. When
>
arg, seems i had used wrong config...sorry
i guess ulong should be the right one for both platforms...will do some more
tests and post v3
regards Frank
> Gesendet: Donnerstag, 30. Januar 2020 um 19:29 Uhr
> Von: "Tom Rini"
> This is still a problem with the rest of the ethernet series
Hi Simon,
> +Devices
> +===
> +
> +Device bindings are described by their own individual binding files.
> +
> +U-Boot provides for some optional properties which are documented here.
> +
> + - acpi,has-power-resource : (boolean) true if this device has a power
> resource.
> +This causes
Hi Marek,
> From: Marek Vasut
> Sent: jeudi 30 janvier 2020 03:23
>
> On 1/29/20 5:51 PM, Patrick DELAUNAY wrote:
> > Hi Marek,
>
> Hi,
>
> >> From: Marek Vasut
> >> Sent: mardi 28 janvier 2020 13:16
> >>
> >> On 1/28/20 10:11 AM, Patrick Delaunay wrote:
> >>> From: Antonio Borneo
> >>>
>
56 matches
Mail list logo
