Hi Tom
Please pull one change for u-boot SoCFPGA.
Regards
Ley Foon
The following changes since commit 7149077353ef4837ab2fcdce5d7e52c5ed4b026a:
Azure/GitLab: Update to latest Docker container (2020-09-02 09:22:29 -0400)
are available in the Git repository at:
https://github.com/lftan/u-b
On 25/08/20 2:51 pm, Dario Binacchi wrote:
> The patch removes duplicate routines used by the two drivers.
>
> Signed-off-by: Dario Binacchi
Please squash it into previous patches.
Thanks and regards,
Lokesh
> ---
>
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-ti-divider.c | 2
On 25/08/20 2:51 pm, Dario Binacchi wrote:
> The implementation of this driver was needed to bind the device tree
> sub-nodes of the 'clocks' node. In fact, the lack of the compatible
> property in the 'clocks' node does not allow the generic 'syscon' or
> 'simple-bus' drivers linked to the 'scm
Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a
System Control Processor, or SCP. ARM Trusted Firmware (ATF)
communicates with the SCP over SCPI to implement the PSCI system suspend
and shutdown functionality. Currently, SCP firmware is optional; the
system will boot and run
Since commit d879616e9e64 ("spl: fit: simplify logic for FDT loading for
non-OS boots"), the SPL looks at the "os" properties of FIT images to
determine where to append the FDT.
The "os" property of the "firmware" image also determines how to execute
the next stage of the boot process, as in 1d379
Some boards, specifically 64-bit Allwinner boards (sun50i), are
extremely limited on SPL size. One strategy that was used to make space
was to remove the FIT "os" property parsing code, because it uses a
rather large lookup table.
However, this forces the legacy FIT parsing code path, which requir
The PinePhone is a smartphone produced by Pine64, with an A64 SoC,
2 or 3 GiB LPDDR3 RAM, 16 or 32 GiB eMMC, 720x1440 MIPI-DSI panel,
and Quectel EG25-G modem.
There are two main board revisions: 1.1 for early adopters, and 1.2
for mass production. Since there is code to detect the board revision
The variable "cmp_str" always leaves me wondering if it is the DT name
of the current board (yes) or DT name in the FIT config entry (no).
In preparation for expanding the functionality here, rename it to
something that obviously means "this is the DT name we are looking for".
Signed-off-by: Samu
All,
This patch series implements a feature to automatically choose the
right PinePhone device tree by probing the hardware. It then extends
the functionality to pass the chosen DTB name to the boot command.
Finally, I add device trees and a defconfig for the PinePhone.
I'm aware that Andre has c
Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE.
This meant that, regardless of the DT chosen by SPL (either by changing
the header in the image or by the selection code at runtime), Linux
always used the default DT.
By using the name from the SPL header (which, because of t
This overwrites the name loaded from the SPL image. It will be different
if there was previously no name provided, or if a more accurate name was
determined by the board variant selection logic. This means that the DT
name in the SPL header now always matches the DT appended to U-Boot.
Signed-off-
Instead of using an entirely separate matching algorithm, simply update
the name of the DT we want to match. Enabling this logic does not depend
on the FIT config name, only on the initial guess of the board name.
Importantly, the initial guess must be "sun50i-a64-pine64-plus", because
otherwise t
There are two different publicly-released revisions of the PinePhone
hardware, versions 1.1 and 1.2; and they need different device trees.
Since some GPIO pins were rerouted, we can use that to distinguish
between them.
Signed-off-by: Samuel Holland
---
arch/arm/mach-sunxi/Kconfig | 7 +++
This moves the validity checking and typecasts all to one place away
from the string comparison logic, and it detangles the compile-time
and runtime control flow.
The new helper will also be used by U-Boot proper in a future commit.
Signed-off-by: Samuel Holland
---
board/sunxi/board.c | 26 +++
On Thu, Sep 3, 2020 at 8:19 AM Bin Meng wrote:
>
> Hi Anup,
>
> On Thu, Sep 3, 2020 at 10:46 AM Anup Patel wrote:
> >
> > On Thu, Sep 3, 2020 at 7:32 AM Bin Meng wrote:
> > >
> > > Hi Anup,
> > >
> > > On Tue, Aug 18, 2020 at 6:03 PM Sean Anderson wrote:
> > > >
> > > > On 8/18/20 5:22 AM, Bin
> Am Montag, den 31.08.2020, 18:04 + schrieb John Robertson:
> > The existing driver is not compatible with the Driver Model.
> >
> > This patch makes the necessary changes while also removing obsolescent
> > calls/properties as follows:
> >
> > - fdtdec_* calls replaced with dev_read_* equiv
> Am Montag, den 31.08.2020, 18:04 + schrieb John Robertson:
> > CONFIG_BLK needs to be enabled by default to allow U-Boot to compile
> > after a 'make pic32mzdask_defconfig'.
> >
> > Signed-off-by: John Robertson
> > ---
> >
> > configs/pic32mzdask_defconfig | 2 +-
> > 1 file changed, 1 ins
Hi Anup,
On Thu, Sep 3, 2020 at 10:46 AM Anup Patel wrote:
>
> On Thu, Sep 3, 2020 at 7:32 AM Bin Meng wrote:
> >
> > Hi Anup,
> >
> > On Tue, Aug 18, 2020 at 6:03 PM Sean Anderson wrote:
> > >
> > > On 8/18/20 5:22 AM, Bin Meng wrote:
> > > > +Anup Patel
> > > >
> > > > On Wed, Jul 29, 2020 at
On Thu, Sep 3, 2020 at 7:32 AM Bin Meng wrote:
>
> Hi Anup,
>
> On Tue, Aug 18, 2020 at 6:03 PM Sean Anderson wrote:
> >
> > On 8/18/20 5:22 AM, Bin Meng wrote:
> > > +Anup Patel
> > >
> > > On Wed, Jul 29, 2020 at 5:57 PM Sean Anderson wrote:
> > >>
> > >> We may need to add a clock-frequency b
Hi Alper,
On Wed, 2 Sep 2020 at 16:21, Alper Nebi Yasak wrote:
>
> On 02/09/2020 20:07, Simon Glass wrote:
> > It looks like that version of git was not in Ubuntu 14.04 but appeared
> > in 16.04. I've just done some patches to make patman work in 14.04, so
> > I'd prefer to keep buildman working
Hi Anup,
On Tue, Aug 18, 2020 at 6:03 PM Sean Anderson wrote:
>
> On 8/18/20 5:22 AM, Bin Meng wrote:
> > +Anup Patel
> >
> > On Wed, Jul 29, 2020 at 5:57 PM Sean Anderson wrote:
> >>
> >> We may need to add a clock-frequency binding like for the K210.
> >>
> >> Signed-off-by: Sean Anderson
> >
>
> This converts the PLMT driver from the riscv-specific timer interface to be
> a DM-based UCLASS_TIMER driver.
>
> The clock-frequency/clocks properties are preferred over timebase-frequency
> for two reasons. First, properties which affect a device should be located
> near its binding in the de
>
> The riscv-timer driver currently serves as a shim for several riscv timer
> drivers. This is not too desirable because it bypasses the usual timer
> selection via the driver model. There is no easy way to specify an
> alternate timing driver, or have the tick rate depend on the cpu's
> configur
> From: Pragnesh Patel [mailto:pragnesh.pa...@sifive.com]
> Sent: Monday, August 24, 2020 10:44 PM
> To: u-boot@lists.denx.de; atish.pa...@wdc.com; bmeng...@gmail.com;
> anup.pa...@wdc.com; sagar.ka...@sifive.com; Rick Jian-Zhi Chen(陳建志)
> Cc: paul.walms...@sifive.com; Pragnesh Patel
> Subject: [P
Setting CONFIG_ENV_ADDR to something other than 0 stops gd->env_addr
from being allocated dynamically. When the environment is in SPI we need
it to be allocated as we can't use a direct memory mapped address.
Signed-off-by: Chris Packham
---
configs/T2080RDB_SPIFLASH_defconfig | 1 -
1 file cha
From: Marek Bykowski
The objective of this patch is to impose the correct attributes to
the RAM memory for the ARM CPU, as shown in the diagram below:
--
Non-Cached || Read-Write
Ordered | Peripherals |Not-Executab
On Wed, Sep 2, 2020 at 5:22 PM Chris Packham wrote:
>
> Hi,
>
> Just tried out v2020.10-rc3 on my T2080RDB and I've got the following
> splat. Haven't had a chance to decode it yet (pointers on how to
> translate the addresses for powerpc welcome) but I figured I'd get
> this out just in case anyo
Hi Sebastian,
On Wed, Sep 2, 2020 at 2:31 PM Sebastian Reichel
wrote:
>
> This series introduces support for a new i.MX6DL based GE patient
> monitor series.
>
> Patch 1: Add support for storing bootcount in SPI-flash
> Patch 2+3: Improve M41T62 RTC driver's reset routine.
> PATCH 4: Support disa
On 02/09/2020 20:07, Simon Glass wrote:
> It looks like that version of git was not in Ubuntu 14.04 but appeared
> in 16.04. I've just done some patches to make patman work in 14.04, so
> I'd prefer to keep buildman working for that also.
I'll keep that in mind. Looks like Ubuntu 14.04 has python
On 9/2/20 2:04 PM, Heinrich Schuchardt wrote:
> On 15.08.20 17:52, Sean Anderson wrote:
>> This patch adds the necessary device tree bindings.
>>
>> Signed-off-by: Sean Anderson
>> Reviewed-by: Simon Glass
>> ---
>>
>> (no changes since v2)
>>
>> Changes in v2:
>> - Convert to use pinmux property
Add a device tree binding for the BOOT button on the Maix board.
Signed-off-by: Heinrich Schuchardt
---
Together with
[PATCH 1/1] cmd/button: return button status
https://lists.denx.de/pipermail/u-boot/2020-September/425221.html
we can use the button status to decide which program to boot.
---
a
To make the button command useful in a shell script it should return the
status of the button:
* 0 (true) - pressed, on
* 1 (false) - not pressed, off
The button command takes only one argument. Correct maxargs.
Signed-off-by: Heinrich Schuchardt
---
cmd/button.c | 4 ++--
1 file changed, 2 in
On Wed, Sep 02, 2020 at 07:31:46PM +0200, Sebastian Reichel wrote:
> GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
> series (GE Bx50). It consists of a carrier PCB used in combination
> with a Congatec QMX6 SoM. This adds U-Boot support using device model
> everywhere and SP
On 02/09/2020 16:25, Edgar E. Iglesias wrote:
> On Wed, Sep 02, 2020 at 04:18:48PM +0100, Andr� Przywara wrote:
>> On 02/09/2020 15:53, Edgar E. Iglesias wrote:
>>> On Wed, Sep 02, 2020 at 03:43:08PM +0100, Andr� Przywara wrote:
On 02/09/2020 12:15, Michal Simek wrote:
>>
>> Hi,
>>
>>
On 15.08.20 17:52, Sean Anderson wrote:
> This patch adds the necessary device tree bindings.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Simon Glass
> ---
>
> (no changes since v2)
>
> Changes in v2:
> - Convert to use pinmux property
> - Don't hog ISP on boot
> - Re-order GPIOs to match the
On 8/5/20 3:26 PM, Marek Vasut wrote:
> Add SH4 R2Dplus machine configured to test various U-Boot PCI ethernet
> options -- RTL8139, EEPRO100, AMD PCnet, DEC Tulip.
Sorry for the delay. I've applied this now.
While this code is being used by all GE platforms its useful
to have it behind a config option for hardware bringup of
new platforms.
Signed-off-by: Sebastian Reichel
---
board/ge/bx50v3/Kconfig | 2 ++
board/ge/common/Kconfig | 7 +++
board/ge/common/Makefile | 3 ++-
board/ge/mx53ppd/Kco
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
series (GE Bx50). It consists of a carrier PCB used in combination
with a Congatec QMX6 SoM. This adds U-Boot support using device model
everywhere and SPL for memory initialization.
Proper configuration is provided as 'ge_b1x5v2
This separates the I2C specific code from the generic
GE vital product data code, so that the generic parts
can be used on hardware with VPD stored in SPI flash
memory.
Signed-off-by: Sebastian Reichel
---
board/ge/bx50v3/bx50v3.c | 2 +-
board/ge/common/vpd_reader.c | 12 ++--
boar
Add GPIO poweroff driver, which is based on the Linux
driver and uses the same DT binding.
Reviewed-by: Simon Glass
Signed-off-by: Sebastian Reichel
---
drivers/sysreset/Kconfig | 7 +++
drivers/sysreset/Makefile| 1 +
drivers/sysreset/poweroff_gpio.c | 92
This series introduces support for a new i.MX6DL based GE patient
monitor series.
Patch 1: Add support for storing bootcount in SPI-flash
Patch 2+3: Improve M41T62 RTC driver's reset routine.
PATCH 4: Support disable_ldb_di_clock_sources for i.MX6DL
Patch 5: Add poweroff-gpio support
Patch 6-8: re
Allow using disable_ldb_di_clock_sources with just the combined
CONFIG_MX6QDL being enabled.
Signed-off-by: Sebastian Reichel
---
arch/arm/mach-imx/mx6/clock.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c
index
The file only contains RTC related code, so let's name
it accordingly.
Signed-off-by: Sebastian Reichel
---
board/ge/bx50v3/bx50v3.c | 2 +-
board/ge/common/Makefile | 2 +-
board/ge/common/{ge_common.c => ge_rtc.c} | 0
board/ge/common/{ge_common.h => ge_rtc.h}
In case of empty battery or glitches the oscillator fail
bit might be set. This will reset the bit in the reset
routine.
Signed-off-by: Sebastian Reichel
---
drivers/rtc/m41t62.c | 50
1 file changed, 50 insertions(+)
diff --git a/drivers/rtc/m41t62.
This takes care of resetting the 32kHz square wave, which is
used by some boards as clock source for the SoC.
Signed-off-by: Sebastian Reichel
---
drivers/rtc/m41t62.c | 89 +---
1 file changed, 83 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/m4
This driver allows to use SPI flash as backing store for
boot counter values with DM enabled.
Signed-off-by: Sebastian Reichel
---
drivers/bootcount/Kconfig | 10 +++
drivers/bootcount/Makefile| 1 +
drivers/bootcount/spi-flash.c | 125 ++
3 files chang
Hi Michal,
On Wed, 2 Sep 2020 at 04:27, Michal Simek wrote:
>
> Hi Simon,
>
> On 01. 09. 20 13:13, Simon Glass wrote:
> > This series allows binman to generate FITs that include multiple DTB
> > images and the configuration to use them.
> >
> > It is then possible to remove the sunxi FIT generato
Hi Alper,
On Wed, 2 Sep 2020 at 06:36, Alper Nebi Yasak wrote:
>
> This patch makes buildman create linked working trees instead of clones
> of the source repository, but keeps updating the older clones of the
> repository that might already exist. These worktrees share "everything
> except worki
On 9/2/20 5:15 AM, Michal Simek wrote:
> From: "Edgar E. Iglesias"
>
> When U-Boot binary exceeds 1MB with CONFIG_POSITION_INDEPENDENT=y
> compilation error is shown:
> /mnt/disk/u-boot/arch/arm/cpu/armv8/start.S:71:(.text+0x3c): relocation
> truncated to fit: R_AARCH64_ADR_PREL_LO21 against symb
On 9/2/20 8:26 AM, Heinrich Schuchardt wrote:
> On 01.09.20 03:19, Rick Chen wrote:
>> Hi Sean
>>
>>> On 8/20/20 4:47 AM, Rick Chen wrote:
Hi Sean
> Hi Sean
>
>> On 8/18/20 11:48 PM, Rick Chen wrote:
>>> Hi Tom
>>>
This patch adds the necessary configs and doc
On 9/2/20 9:42 AM, Tom Rini wrote:
> On Tue, Aug 18, 2020 at 06:50:06PM +0200, Marek Vasut wrote:
>
>> On 8/5/20 11:26 PM, Marek Vasut wrote:
>>> Add SH4 R2Dplus machine configured to test various U-Boot PCI ethernet
>>> options -- RTL8139, EEPRO100, AMD PCnet, DEC Tulip.
>>>
>>
>> Bump ?
>
> Ste
On Tue, Aug 18, 2020 at 06:50:06PM +0200, Marek Vasut wrote:
> On 8/5/20 11:26 PM, Marek Vasut wrote:
> > Add SH4 R2Dplus machine configured to test various U-Boot PCI ethernet
> > options -- RTL8139, EEPRO100, AMD PCnet, DEC Tulip.
> >
>
> Bump ?
Stephen?
--
Tom
signature.asc
Description:
On 9/2/20 11:17 AM, Heinrich Schuchardt wrote:
> On 02.09.20 16:56, Sean Anderson wrote:
>>
>> On 9/2/20 8:26 AM, Heinrich Schuchardt wrote:
>>> On 15.08.20 17:52, Sean Anderson wrote:
This normalizes the documentatation to conform to kernel-doc style [1]. It
>>>
>>> Nits:
>>> %s/documentatati
On Wed, Sep 02, 2020 at 04:18:48PM +0100, André Przywara wrote:
> On 02/09/2020 15:53, Edgar E. Iglesias wrote:
> > On Wed, Sep 02, 2020 at 03:43:08PM +0100, Andr� Przywara wrote:
> >> On 02/09/2020 12:15, Michal Simek wrote:
>
> Hi,
>
> >>
> >>> From: "Edgar E. Iglesias"
> >>>
> >>> When U-Bo
On 02/09/2020 15:53, Edgar E. Iglesias wrote:
> On Wed, Sep 02, 2020 at 03:43:08PM +0100, Andr� Przywara wrote:
>> On 02/09/2020 12:15, Michal Simek wrote:
Hi,
>>
>>> From: "Edgar E. Iglesias"
>>>
>>> When U-Boot binary exceeds 1MB with CONFIG_POSITION_INDEPENDENT=y
>>> compilation error is sh
On 02.09.20 16:56, Sean Anderson wrote:
>
> On 9/2/20 8:26 AM, Heinrich Schuchardt wrote:
>> On 15.08.20 17:52, Sean Anderson wrote:
>>> This normalizes the documentatation to conform to kernel-doc style [1]. It
>>
>> Nits:
>> %s/documentatation/documentation/
>>
>>> also moves the documentation fo
On Wed, Sep 02, 2020 at 02:33:22PM +0200, Harm Berntsen wrote:
> When running Docker with user namespace remapping, the UID/GID of the
> files must be in the 0 - 65535 range. One toolchain's tar file included
> files outside of that range and thus I could not run the image on my
> GitLab runners.
Hi,
We have an imx.6 based custom board and we have emmc, SD card and SPI NOR
Flash(MX66L51235FZ2i-10g from Macronix) as boot devices on our board based on
imx6 (MC imx6D7CVT08AE) processor.
our requirement is to boot SPL + U-boot from the SPI NOR Flash and then load
the linux kernel from em
On 9/2/20 8:26 AM, Heinrich Schuchardt wrote:
> On 15.08.20 17:52, Sean Anderson wrote:
>> This normalizes the documentatation to conform to kernel-doc style [1]. It
>
> Nits:
> %s/documentatation/documentation/
>
>> also moves the documentation for pinctrl_ops inline, and adds argument and
>>
On Wed, Sep 02, 2020 at 03:43:08PM +0100, André Przywara wrote:
> On 02/09/2020 12:15, Michal Simek wrote:
>
> Hi,
Hi Andre,
>
> > From: "Edgar E. Iglesias"
> >
> > When U-Boot binary exceeds 1MB with CONFIG_POSITION_INDEPENDENT=y
> > compilation error is shown:
> > /mnt/disk/u-boot/arch/arm
Hi,
On 02. 09. 20 16:43, André Przywara wrote:
> On 02/09/2020 12:15, Michal Simek wrote:
>
> Hi,
>
>> From: "Edgar E. Iglesias"
>>
>> When U-Boot binary exceeds 1MB with CONFIG_POSITION_INDEPENDENT=y
>> compilation error is shown:
>> /mnt/disk/u-boot/arch/arm/cpu/armv8/start.S:71:(.text+0x3c):
On 02/09/2020 12:15, Michal Simek wrote:
Hi,
> From: "Edgar E. Iglesias"
>
> When U-Boot binary exceeds 1MB with CONFIG_POSITION_INDEPENDENT=y
> compilation error is shown:
> /mnt/disk/u-boot/arch/arm/cpu/armv8/start.S:71:(.text+0x3c): relocation
> truncated to fit: R_AARCH64_ADR_PREL_LO21 agai
On Wed, Sep 2, 2020 at 6:38 PM Marek Vasut wrote:
>
> On 9/2/20 8:13 AM, Frank Wunderlich wrote:
> > From: Chunfeng Yun
> >
> > Add a member to save xHCI version, it's used some times.
> >
> > Signed-off-by: Chunfeng Yun
> > ---
> > drivers/usb/host/xhci-ring.c | 4 ++--
> > drivers/usb/host/xh
Remove NXP powerpc p1023rdb board support as it is no
longer maintained.
Signed-off-by: Priyanka Jain
---
arch/powerpc/cpu/mpc85xx/Kconfig | 8 -
board/freescale/p1023rdb/Kconfig | 12 -
board/freescale/p1023rdb/MAINTAINERS | 6 -
board/freescale/p1023rdb/Makefile| 8 -
board/
When running Docker with user namespace remapping, the UID/GID of the
files must be in the 0 - 65535 range. One toolchain's tar file included
files outside of that range and thus I could not run the image on my
GitLab runners. This patch fixes that and the U-Boot CI completes just
fine in my enviro
This patch makes buildman create linked working trees instead of clones
of the source repository, but keeps updating the older clones of the
repository that might already exist. These worktrees share "everything
except working directory specific files such as HEAD, index, etc." with
the source repo
On Wed, 2 Sep 2020 09:11:52 +0200
Andre Heider wrote:
> On 31/08/2020 09:52, Pali Rohár wrote:
> > On Monday 31 August 2020 05:25:38 Andre Heider wrote:
> >> From: Grzegorz Jaszczyk
> >>
> >> The settings of reference clock is done via pcie address space and
> >> not comphy address space - mov
On 01.09.20 03:19, Rick Chen wrote:
> Hi Sean
>
>> On 8/20/20 4:47 AM, Rick Chen wrote:
>>> Hi Sean
>>>
Hi Sean
> On 8/18/20 11:48 PM, Rick Chen wrote:
>> Hi Tom
>>
>>> This patch adds the necessary configs and docs for FPIOA and GPIO
>>> support
>>> on the K210.
On 15.08.20 17:52, Sean Anderson wrote:
> This normalizes the documentatation to conform to kernel-doc style [1]. It
Nits:
%s/documentatation/documentation/
> also moves the documentation for pinctrl_ops inline, and adds argument and
> return-value documentation. I have kept the usual function st
Add IO range property to fix below error on uboot
PCI: Failed autoconfig bar 18
Signed-off-by: Wasim Khan
---
Changes in v2:
- Updated commit subject
arch/arm/dts/fsl-lx2160a.dtsi | 18 --
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/fsl-lx2160a.d
Add platform data and a device structure for the spi device
present on am335x-icev2. This requires moving all omap3_spi
platform data structures and symbols to an omap3_spi.h so that
the board file can access them.
Signed-off-by: Faiz Abbas
---
arch/arm/mach-omap2/am33xx/board.c | 12 +
driv
Add an ofdata_to_platdata() callback to access dts in U-boot and
access all platform data in it. This prepares the driver for supporting
both device tree as well as static platform data structures in SPL.
Signed-off-by: Faiz Abbas
---
drivers/spi/omap3_spi.c | 37 ++--
There are devices which don't use OF_CONTROL or OF_PLATDATA but instead
rely on statically defined platdata. Block dm_scan_fdt_dev() with both
configs to avoid build failures under this condition.
Signed-off-by: Faiz Abbas
---
drivers/spi/spi-uclass.c | 2 +-
1 file changed, 1 insertion(+), 1 de
am335x internal SRAM is too small to support the addition of
SPI bootmode to the default defconfig. Add a separate spiboot_defconfig
Signed-off-by: Faiz Abbas
---
configs/am335x_evm_spiboot_defconfig | 93
1 file changed, 93 insertions(+)
create mode 100644 configs/
The following patches add spi boot support to TI's am335x-icev2 platform
Faiz Abbas (5):
arm: dts: am335x-icev2: Add spi node
configs: Add spiboot support for am335x
spi: spi-uclass: Block dm_scan_fdt_dev with OF_CONTROL to prevent
build failures
spi: omap3_spi: Read platform data in o
Add spi and spi nor flash nodes for am335x-icev2.
Signed-off-by: Faiz Abbas
---
arch/arm/dts/am335x-icev2.dts | 50 +++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/dts/am335x-icev2.dts b/arch/arm/dts/am335x-icev2.dts
index 37484cb6f5..2a1b3a53e9 100644
From: "Edgar E. Iglesias"
When U-Boot binary exceeds 1MB with CONFIG_POSITION_INDEPENDENT=y
compilation error is shown:
/mnt/disk/u-boot/arch/arm/cpu/armv8/start.S:71:(.text+0x3c): relocation
truncated to fit: R_AARCH64_ADR_PREL_LO21 against symbol `__rel_dyn_end'
defined in .bss_start section in
For UBI partitions ("partubi" in dfu_alt_info), dfu_fill_entity_mtd sets
the mtd.ubi flag; however other functions incorrectly check for nand.ubi
instead. Fix this by checking for the correct flag.
Signed-off-by: Guillermo Rodriguez
Cc: Lukasz Majewski
---
drivers/dfu/dfu_mtd.c | 4 ++--
1 file
From: Aaron Williams
This header will be used by the DDR driver (lmc). Its ported from the
2013 Cavium / Marvell U-Boot repository.
Signed-off-by: Aaron Williams
Signed-off-by: Stefan Roese
---
Changes in v3:
- Remove "https://spdx.org/licenses"; line
Changes in v2:
- Some unsupported Octeo
On 9/2/20 8:13 AM, Frank Wunderlich wrote:
> From: Chunfeng Yun
>
> Add a member to save xHCI version, it's used some times.
>
> Signed-off-by: Chunfeng Yun
> ---
> drivers/usb/host/xhci-ring.c | 4 ++--
> drivers/usb/host/xhci.c | 1 +
> include/usb/xhci.h | 1 +
> 3 files chan
Hi Simon,
On 01. 09. 20 13:13, Simon Glass wrote:
> This series allows binman to generate FITs that include multiple DTB
> images and the configuration to use them.
>
> It is then possible to remove the sunxi FIT generator script, so this
> series handles that also.
>
> With this, sunxi is fully
> -Original Message-
> From: Priyanka Jain
> Sent: Wednesday, September 2, 2020 12:49 PM
> To: Meenakshi Aggarwal ; u-
> b...@lists.denx.de
> Cc: Varun Sethi
> Subject: RE: [PATCH 1/2] armv8: lx2162a: Add Soc changes to support
> LX2162A
>
>
>
> >-Original Message-
> >From:
Anatolij,
> Did you define CONFIG_BMP_24BPP in your board config file?
Yes. Without this define the command "bmp display " does not do anything
if the given BMP is a 24BPP BMP. With this define the a 24 BPP BMP I displayed
but with wrong colors because the framebuffer of my (i.MX6) board expect
On 01/09/2020 22.48, Thirupathaiah Annapureddy wrote:
> Anti rollback protection is required when there is a need to retire
> previous versions of FIT images due to security flaws in them.
> Currently U-Boot Verified boot does not have rollback protection to
> protect against known security flaws.
>-Original Message-
>From: Meenakshi Aggarwal
>Sent: Tuesday, September 1, 2020 3:03 PM
>To: u-boot@lists.denx.de; Priyanka Jain
>Cc: Varun Sethi ; Meenakshi Aggarwal
>; Ioana Ciornei ;
>Qiang Zhao ; Hui Song ;
>Manish Tomar ; Vikas Singh
>
>Subject: [PATCH 2/2] armv8: lx2162aqds: Add sup
>-Original Message-
>From: Meenakshi Aggarwal
>Sent: Tuesday, September 1, 2020 3:03 PM
>To: u-boot@lists.denx.de; Priyanka Jain
>Cc: Varun Sethi ; Meenakshi Aggarwal
>
>Subject: [PATCH 1/2] armv8: lx2162a: Add Soc changes to support LX2162A
>
>From: Meenakshi Aggarwal
>
>LX2162 is LX
On 31/08/2020 09:52, Pali Rohár wrote:
On Monday 31 August 2020 05:25:38 Andre Heider wrote:
From: Grzegorz Jaszczyk
The settings of reference clock is done via pcie address space and not
comphy address space - move the settings in appropriate place.
This aligns hw initialization of pcie advk
On 31.08.20 20:08, Atish Patra wrote:
> On Thu, Aug 27, 2020 at 9:16 AM Heinrich Schuchardt
> wrote:
>>
>> If a reserved memory node in the device tree has the property no-map,
>> remove it from the UEFI memory map provided by GetMemoryMap().
>>
>> Signed-off-by: Heinrich Schuchardt
In the mail
88 matches
Mail list logo