Hi Tom,
I'm still actively supporting this board, and will do the rebase and DM
conversion.
I'm not sure about the process from here. Will I need to submit the patches
like for a new board again?
Thanks,
Tony Dinh
On Sat, May 22, 2021 at 5:48 AM Tom Rini wrote:
> These boards have not been co
Add more details to test cases by comparing each expected line with the
command's output. Add new test cases:
- sqfsls at an empty directory
- sqfsls at a sub-directory
Signed-off-by: Joao Marcos Costa
---
.../test_fs/test_squashfs/test_sqfs_ls.py | 80 ++-
1 file changed, 62
The previous strategy to know if a file was correctly loaded was to
check for how many bytes were read and compare it against the file's
original size. Since this is not a good solution, replace it by
comparing the checksum of the loaded bytes against the original file's
checksum. Add more test cas
Remove the previous OOP approach, which was confusing and incomplete.
Add more test cases by making SquashFS images with various options,
concerning file fragmentation and its compression. Add comments to
properly document the code.
Signed-off-by: Joao Marcos Costa
---
.../test_fs/test_squashfs/
Hello,
This patch series fixes the following issues:
- poor strategy to check if files were properly loaded
- wrong quoting style for strings
- tests failing at the second run because of a wrong clean-up strategy
Finally, it improves:
- code overall documentation level, with more comments and bet
From: MengLi
In uboot command line environment, watchdog is not able to be
stopped with below commands:
SOCFPGA_STRATIX10 # wdt dev watchdog@ffd00200
SOCFPGA_STRATIX10 # wdt stop
Refer to watchdog driver in linux kernel, it is also need to reset
watchdog after disable it so that the disable actio
From: MengLi
In latest u-boot code, watchdog feature is implemented, so enable
wdt command by default.
Signed-off-by: Meng Li
---
v2:
Change the title of this patch
---
configs/socfpga_stratix10_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/socfpga_stratix10_defconfig
Hello Ilias,
2021年5月23日(日) 17:07 Ilias Apalodimas :
>
> Hi Masami,
>
> On Wed, May 19, 2021 at 02:44:21PM +0900, Masami Hiramatsu wrote:
> > Hi,
> >
> > Here is the 4th version of the series (including some fixes for build
> > errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.
> >
On Mon, 26 Apr 2021 17:52:51 +0530
Jagan Teki wrote:
Hi Jagan,
> On Mon, Apr 26, 2021 at 4:57 PM Andre Przywara wrote:
> >
> > On Sun, 25 Apr 2021 18:03:05 +0530
> > Jagan Teki wrote:
> >
> > Hi Jagan,
> >
> > thanks for your input!
> >
> > > On Sun, Apr 25, 2021 at 3:30 PM Andre Przywara
Now that we have a runtime function to decide the default MMC device to
use on Allwinner boards, we don't need the hardcoded Kconfig variable
anymore (we do the same logic at runtime now).
Drop the sunxi defaults, and since there is only one other user left,
use one generic default of 0 now. An "i
At the moment the fastboot code relies on the Kconfig variable
CONFIG_FASTBOOT_FLASH_MMC_DEV to point to the MMC device to use for the
flash command. This value needs to be the *U-Boot device number*, which
recently got more dynamic, and depends on other MMC nodes in the
devicetree, but also on mmc
The default MMC device to use for the fastboot flash command is hard to
decide at runtime, since the numbering of the MMC devices depends on
devicetree nodes. On the hardware side, the eMMC is connected to device
2, but this might be U-Boot's device 1 or 2, depending on whether the DT
contains a Wi
At the moment the fastboot code relies on the Kconfig variable
CONFIG_FASTBOOT_FLASH_MMC_DEV to point to the MMC device to use for the
flash command. This value needs to be the *U-Boot device number*, which
is picked by the U-Boot device model at runtime. This makes it quite
tricky and fragile to f
TCF flag only means that all data was sent to FIFO. To check if the
data was sent out of FIFO we should also wait for the BUSY flag to be
cleared. Otherwise there is a race condition which can lead to
inability to write short (one byte long) data.
Signed-off-by: Daniil Stas
Cc: Patrick Delaunay
Disabling clk_ck clock leads to link up status loss in phy, which
leads to auto-negotiation restart before each network command
execution.
This issue is especially big for PXE boot protocol because of
auto-negotiation restarts before each configuration filename trial.
To avoid this issue don't di
On 5/23/21 7:00 PM, Sean Anderson wrote:
ut_asserteq_strn is defined twice. Remove one definition.
Fixes: 33d7edfd5f ("test: Add a way to check part of a console line or skip it")
Signed-off-by: Sean Anderson
Reviewed-by: Heinrich Schuchardt
From: "Ying-Chun Liu (PaulLiu)"
Add initial support for Advantech RSB-3720 board.
The initial support includes:
- MMC
- eMMC
- I2C
- FEC
- Serial console
Signed-off-by: Darren Huang
Signed-off-by: Kevin12.Chen
Signed-off-by: Phill.Liu
Signed-off-by: Tim Liang
Signed-off-by: wei.zeng
Si
On 5/23/21 9:40 PM, Tom Rini wrote:
On Thu, May 20, 2021 at 05:36:03PM +0200, Heinrich Schuchardt wrote:
In cpu_to_be32_array() and be32_to_cpu_array() we should not compare an int
counter to a size_t parameter. Correct the type of the counter.
Signed-off-by: Heinrich Schuchardt
---
include
On Thu, May 20, 2021 at 05:36:03PM +0200, Heinrich Schuchardt wrote:
> In cpu_to_be32_array() and be32_to_cpu_array() we should not compare an int
> counter to a size_t parameter. Correct the type of the counter.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> include/linux/byteorder/generic.h |
On Fri, May 21, 2021 at 05:01:34PM +0200, Marek Vasut wrote:
> The following changes since commit 27c2236f8acfa311eed2c8f8d210824fadd25483:
>
> Merge tag 'xilinx-for-v2021.07-rc3' of
> https://source.denx.de/u-boot/custodians/u-boot-microblaze (2021-05-19
> 11:50:25 -0400)
>
> are available in
ut_asserteq_strn is defined twice. Remove one definition.
Fixes: 33d7edfd5f ("test: Add a way to check part of a console line or skip it")
Signed-off-by: Sean Anderson
---
include/test/ut.h | 17 -
1 file changed, 17 deletions(-)
diff --git a/include/test/ut.h b/include/test/ut
This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM. Remove it. As this is the last
ARCH_T4160 platform, remove that support as well.
Signed-off-by: Tom Rini
---
Changes in v2:
- Only remove T4160 support and not T4240RDB as well.
---
From: "Ying-Chun Liu (PaulLiu)"
Add board dts for imx8mm-cl-iot-gate
Signed-off-by: Darren Huang
Signed-off-by: Kevin12.Chen
Signed-off-by: Phill.Liu
Signed-off-by: Tim Liang
Signed-off-by: wei.zeng
Signed-off-by: Ying-Chun Liu (PaulLiu)
Cc: uboot-imx
---
arch/arm/dts/imx8mp-rsb3720-a1-u
From: "Ying-Chun Liu (PaulLiu)"
Add initial support for Advantech RSB-3720 board.
The initial support includes:
- MMC
- eMMC
- I2C
- FEC
- Serial console
Ying-Chun Liu (PaulLiu) (2):
arm: dts: add imx8mp-rsb3720-a1 dts file
arm: imx8m: add support for Advantech RSB-3720
arch/arm/dts/M
Hi Masami,
On Wed, May 19, 2021 at 02:44:21PM +0900, Masami Hiramatsu wrote:
> Hi,
>
> Here is the 4th version of the series (including some fixes for build
> errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.
>
> This series includes not only DeveloperBox support but also some f
25 matches
Mail list logo