Hi,
On Thu, 19 Aug 2021 at 12:15, Tom Rini wrote:
> These sections are no longer relevant, remove.
>
> Signed-off-by: Tom Rini
> ---
> README | 13 -
> 1 file changed, 13 deletions(-)
>
> diff --git a/README b/README
> index fea0d3c0d0f9..495c1ae3549e 100644
> --- a/README
> +++
Hi,
On Wed, 18 Aug 2021 at 07:02, Tom Rini wrote:
> Finish moving this driver to Kconfig.
> - Update the dependency logic for Exynos5 too
> - Remove the unused CONFIG_SYS_I2C_S3C24X0_SPEED variable
> - Drop CONFIG_SYS_I2C_S3C24X0_SLAVE as it's always set to 0.
> - Move the internal
On Wed, Aug 25, 2021 at 10:01 AM Tom Rini wrote:
>
> On Wed, Aug 25, 2021 at 08:05:17AM +0800, Bin Meng wrote:
>
> > At present U-Boot CI testing is still using QEMU 4.2.0 which is
> > pretty old. Let's bump up to QEMU 6.1.0.
> >
> > ninja-build is added as the prerequisite required by QEMU
This converts the following to Kconfig:
CONFIG_RAMBOOT_PBL
CONFIG_SYS_FSL_PBL_PBI
CONFIG_SYS_FSL_PBL_RCW
Signed-off-by: Tom Rini
---
README| 9 ---
common/Kconfig.boot | 20 ++
configs/P2041RDB_NAND_defconfig
Based on include/configs/ls1046ardb.h it seems that CONFIG_RAMBOOT_PBL
should have been enabled, but was not. Enable and migrate the values to
Kconfig.
Cc: Mingkai Hu
Cc: Rajesh Bhagat
Signed-off-by: Tom Rini
---
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 3 +++
On Tue, Aug 17, 2021 at 5:08 PM Zong Li wrote:
>
> This patch set contains the SiFive composable cache support, and
> indroduce an interface to do cache initialization, each platform can
> overwrite it by their own implementation.
>
> Changed in v3:
> - Combine some patches
> - Drop the
On Wed, Aug 25, 2021 at 08:05:17AM +0800, Bin Meng wrote:
> At present U-Boot CI testing is still using QEMU 4.2.0 which is
> pretty old. Let's bump up to QEMU 6.1.0.
>
> ninja-build is added as the prerequisite required by QEMU 6.1.0.
>
> Note there is a bug in QEMU 6.1.0 Xilinx Zynq UART
On Wed, Aug 25, 2021 at 08:05:18AM +0800, Bin Meng wrote:
> genimage [1] is a tool to create flash/disk images. This is required
> by some targets, e.g.: sifive_unleashed, to generate sdcard or spi-nor
> images for real hardware, as well as U-Boot CI testing.
>
> [1]
Hi U-Boot folks,
On Mon, Aug 23, 2021 at 08:36:43PM +0800, Huang Jianan wrote:
> From: Huang Jianan
>
> Add erofs filesystem support.
>
> The code is adapted from erofs-utils in order to reduce maintenance
> burden and keep with the latest feature.
>
> Changes since v1:
> - fix the
Hi All,
Do you have update on this patch series?
We look forward to continuing the SPL FIT booting patch for Aspeed SoCs based
on this one.
Any advice and suggestions are appreciated.
Chiawei
> From: U-Boot On Behalf Of Chia-Wei Wang
> Sent: Friday, July 30, 2021 9:08 AM
>
> This patch
On 8/24/2021 5:41 PM, Tom Rini wrote:
> Rather than using CONFIG_SABRELITE to set FDTFILE for only that
> platform, switch to always setting this based on
> CONFIG_DEFAULT_DEVICE_TREE as this should always match the kernel
> device tree name anyhow.
>
> Cc: Troy Kisky
> Signed-off-by: Tom Rini
On 8/24/2021 5:41 PM, Tom Rini wrote:
> Move the CONFIG_DDR_MB symbol to Kconfig. A later clean-up would be to
> make dynamic memory size detection work based on how this is done on
> other i.MX6 platforms.
>
> Cc: Troy Kisky
> Signed-off-by: Tom Rini
> ---
> For example, mx6cuboxi does
On some cases, the actual number of bytes read can be shorter
than what was requested. This can be handled gracefully by
taking this difference into account instead of exiting.
Signed-off-by: Thibault Ferrante
---
tools/env/fw_env.c | 22 --
1 file changed, 12
On specific devices, read can return less bytes than expected.
I noticed this problem on a EEPROM chip with 16Kbyte of memory. Defining
an environment with more than 4Kbyte leads to less bytes read than expected
and failures from fw_printenv/fw_setenv.
This patch target to handle this issue by
On Tue, Aug 24, 2021 at 06:05:10PM -0700, Troy Kisky wrote:
> On 8/24/2021 5:41 PM, Tom Rini wrote:
> > Move the CONFIG_DDR_MB symbol to Kconfig. A later clean-up would be to
> > make dynamic memory size detection work based on how this is done on
> > other i.MX6 platforms.
> >
> > Cc: Troy
This converts the following to Kconfig:
CONFIG_QSPI_BOOT
Signed-off-by: Tom Rini
---
configs/am43xx_evm_qspiboot_defconfig | 2 +-
configs/ls1012a2g5rdb_qspi_defconfig | 1 -
configs/ls1012afrdm_qspi_defconfig | 1 -
This converts the following to Kconfig:
CONFIG_QSPI_BOOT
Signed-off-by: Tom Rini
---
configs/am43xx_evm_qspiboot_defconfig | 2 +-
configs/ls1012a2g5rdb_qspi_defconfig | 1 -
configs/ls1012afrdm_qspi_defconfig | 1 -
This converts the following to Kconfig:
CONFIG_SYS_FSL_DDR4
Signed-off-by: Tom Rini
---
README| 4
configs/ls1088aqds_defconfig | 1 -
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 2 +-
configs/ls1088aqds_qspi_defconfig
- Provide a default Kconfig value of the default script
- Largely continue to define this via the board Kconfig file
- For the boards that select a script based on defconfig rather than
TARGET, keep this within the defconfig.
Signed-off-by: Tom Rini
---
arch/arm/config.mk
Move the CONFIG_DDR_MB symbol to Kconfig. A later clean-up would be to
make dynamic memory size detection work based on how this is done on
other i.MX6 platforms.
Cc: Troy Kisky
Signed-off-by: Tom Rini
---
For example, mx6cuboxi does dynamic memory size detection and that code
could be adapted
Rather than using CONFIG_SABRELITE to set FDTFILE for only that
platform, switch to always setting this based on
CONFIG_DEFAULT_DEVICE_TREE as this should always match the kernel
device tree name anyhow.
Cc: Troy Kisky
Signed-off-by: Tom Rini
---
configs/mx6qsabrelite_defconfig | 1 -
The symbol CONFIG_IMX_NAND is not referenced in the code, remove it.
Signed-off-by: Tom Rini
---
configs/colibri-imx6ull_defconfig | 1 -
configs/colibri_vf_defconfig | 1 -
2 files changed, 2 deletions(-)
diff --git a/configs/colibri-imx6ull_defconfig
b/configs/colibri-imx6ull_defconfig
This converts the following to Kconfig:
CONFIG_SPL
Signed-off-by: Tom Rini
---
configs/mx6memcal_defconfig | 1 -
configs/riotboard_defconfig | 2 +-
2 files changed, 1 insertion(+), 2 deletions(-)
diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig
index
Currently, there is no over-arching symbol for access to
arch/arm/mach-imx nor the CONFIG symbols that are common over all of
these related platforms. This new CONFIG symbol will allow us to start
down this path.
Signed-off-by: Tom Rini
---
arch/arm/Kconfig | 13 +
This adds CI tests for SiFive Unleashed board.
QEMU supports booting exact the same images as used on the real
hardware out of the box, that U-Boot SPL loads U-Boot proper
from either an SD card or the SPI NOR flash, hence we can easily
set up CI to cover these 2 boot flows of SiFive Unleashed
This adds genimage [1] config files for generating SD card and spi-nor
images, which can be programmed to an SD card or SPI flash and boot
from there.
The same images will be used for U-Boot CI testing for this board.
[1] https://github.com/pengutronix/genimage
Signed-off-by: Bin Meng
---
genimage [1] is a tool to create flash/disk images. This is required
by some targets, e.g.: sifive_unleashed, to generate sdcard or spi-nor
images for real hardware, as well as U-Boot CI testing.
[1] https://github.com/pengutronix/genimage
Signed-off-by: Bin Meng
---
tools/docker/Dockerfile |
At present U-Boot CI testing is still using QEMU 4.2.0 which is
pretty old. Let's bump up to QEMU 6.1.0.
ninja-build is added as the prerequisite required by QEMU 6.1.0.
Note there is a bug in QEMU 6.1.0 Xilinx Zynq UART emulation codes.
A quick fix [1] was posted on QEMU mailing list but it it
Hi Patrick,
I'm having issues with some of the recent changes centered around FIP
support and CONFIG_STM32MP15x_STM32IMAGE. and commit f91783edf224 ("arm:
stm32mp: handle the OP-TEE nodes in DT with FIP support")
## Problem description
> +#ifdef CONFIG_STM32MP15x_STM32IMAGE
> + /*
On 8/24/21 8:13 PM, Adam Ford wrote:
On Tue, Aug 24, 2021 at 1:02 PM Marek Vasut wrote:
On 8/24/21 6:43 PM, Adam Ford wrote:
There are two versaclock programmable clock chips used to provide
reference clocks for both USB and Ethernet. Enable the driver
in the configs to run these clocks.
Use binman to pack images.
Note that imx8mm_venice supports several boards via multiple DTB's thus
in the fit node we must use:
- fit,fdt-list = "of-list"
- fdt-SEQ
- config-SEQ
Signed-off-by: Tim Harvey
---
arch/arm/dts/imx8mm-venice-u-boot.dtsi| 119 ++
Use the common imx8mm-venice-u-boot.dtsi (dtb for the
'DEFAULT_DEVICE_TREE) so that it inherits things like binman.
Signed-off-by: Tim Harvey
---
arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi | 66 ++-
1 file changed, 5 insertions(+), 61 deletions(-)
diff --git
Use the common imx8mm-venice-u-boot.dtsi (dtb for the
'DEFAULT_DEVICE_TREE) so that it inherits things like binman.
Signed-off-by: Tim Harvey
---
arch/arm/dts/imx8mm-venice-gw7902-u-boot.dtsi | 54 +--
1 file changed, 1 insertion(+), 53 deletions(-)
diff --git
Use the common imx8mm-venice-u-boot.dtsi (dtb for the
'DEFAULT_DEVICE_TREE) so that it inherits things like binman.
Signed-off-by: Tim Harvey
---
arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi | 62 +++
1 file changed, 9 insertions(+), 53 deletions(-)
diff --git
This series changes imx8mm-venice to use binman to pack images.
Tim Harvey (4):
arm64: dts: imx8mm-venice-gw700x-u-boot.dtsi: use
imx8mm-venice-u-boot.dtsi
arm64: dts: imx8mm-venice-gw7901-u-boot.dtsi: use
imx8mm-venice-u-boot.dtsi
arm64: dts: imx8mm-venice-gw7902-u-boot.dtsi: use
Now that the versaclock driver is available, point the ethernet
node at these clocks and configure the RGMII to enable Ethernet.
Signed-off-by: Adam Ford
---
V2: Fix subject heading
diff --git a/arch/arm/dts/beacon-renesom-som.dtsi
b/arch/arm/dts/beacon-renesom-som.dtsi
index
There are two versaclock programmable clock chips used to provide
reference clocks for both USB and Ethernet. Enable the driver
in the configs to run these clocks.
Signed-off-by: Adam Ford
---
V2: Move from defconfig to kconfig
diff --git a/arch/arm/mach-rmobile/Kconfig.64
On Tue, Aug 24, 2021 at 1:13 PM Adam Ford wrote:
>
> On Tue, Aug 24, 2021 at 1:02 PM Marek Vasut wrote:
> >
> > On 8/24/21 6:43 PM, Adam Ford wrote:
> > > There are two versaclock programmable clock chips used to provide
> > > reference clocks for both USB and Ethernet. Enable the driver
> > >
On Tue, Aug 24, 2021 at 1:02 PM Marek Vasut wrote:
>
> On 8/24/21 6:43 PM, Adam Ford wrote:
> > There are two versaclock programmable clock chips used to provide
> > reference clocks for both USB and Ethernet. Enable the driver
> > in the configs to run these clocks.
> >
> > Signed-off-by: Adam
On 8/24/21 6:05 PM, Adam Ford wrote:
There is a QSPI NOR flash part on the board. Because this chip isn't
yet supported in Linux, but it is supported in U-Boot, and the
face that the RPC_SPI compatible names are different in U-Boot and
Linux, the device tree updates are confined to -u-boot.dtsi
On 8/24/21 6:43 PM, Adam Ford wrote:
There are two versaclock programmable clock chips used to provide
reference clocks for both USB and Ethernet. Enable the driver
in the configs to run these clocks.
Signed-off-by: Adam Ford
diff --git a/configs/r8a774a1_beacon_defconfig
On 8/24/21 6:43 PM, Adam Ford wrote:
Now that the versaclock driver is available, point the ethernet
node at these clocks and configure the RGMII to enable Ethernet.
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/beacon-renesom-som.dtsi
b/arch/arm/dts/beacon-renesom-som.dtsi
index
CONFIG_SYS_AT91_CPU_NAME looks to be unused.
Remove it and remove it from config_whitelist.txt
Signed-off-by: Eugen Hristev
---
include/configs/pm9261.h | 2 --
include/configs/pm9263.h | 2 --
scripts/config_whitelist.txt | 1 -
3 files changed, 5 deletions(-)
diff --git
Now that the versaclock driver is available, point the ethernet
node at these clocks and configure the RGMII to enable Ethernet.
Signed-off-by: Adam Ford
diff --git a/arch/arm/dts/beacon-renesom-som.dtsi
b/arch/arm/dts/beacon-renesom-som.dtsi
index d30bab3c8b..9fe541b607 100644
---
There are two versaclock programmable clock chips used to provide
reference clocks for both USB and Ethernet. Enable the driver
in the configs to run these clocks.
Signed-off-by: Adam Ford
diff --git a/configs/r8a774a1_beacon_defconfig
b/configs/r8a774a1_beacon_defconfig
index
Hi Marcel,
On Mon, 23 Aug 2021 at 09:09, Marcel Ziswiler wrote:
>
> From: Marcel Ziswiler
>
> Use binman to pack images.
>
> Signed-off-by: Marcel Ziswiler
>
> ---
>
> Changes in v2:
> - Explicitly pass filename to binman when generating binaries as
> suggested by Heiko.
> - Use proper
There is a QSPI NOR flash part on the board. Because this chip isn't
yet supported in Linux, but it is supported in U-Boot, and the
face that the RPC_SPI compatible names are different in U-Boot and
Linux, the device tree updates are confined to -u-boot.dtsi files.
In order to use the QSPI, TF-A
The Linux i2c driver supports i2c-scl-rising-time-ns,
and i2c-scl-falling-time-ns, but U-Boot uses hard-coded values
for these values.
Update the calculation by fetching them from the device tree if
present and use the previous values as the default if they are
missing.
Signed-off-by: Adam Ford
On 8/24/21 12:37 PM, Clément Léger wrote:
> Le Mon, 23 Aug 2021 07:42:58 +,
> a écrit :
>
>> On 8/4/21 5:55 PM, Clément Léger wrote:
>>> When SYSRESET is enabled, cpu_reset function is also defined in
>>> sysreset-uclass.c which lead to multiple definitions of this
>>> function since reset.c
There is no space in OCM for SPL stack because the space in OCM is occupied
by TF-A. That's why move relocate stack to DDR to 0x1800 address
and also enable SPL_SIZE_LIMIT not to be more then 0xfffea000 which is
default address for TFA.
It is good to summarize current DDR usage in SPL flow.
It is an unfortunate reality that some PHY settings done by U-Boot
persist even after the PHY is reset and taken over by Linux, and even
more unfortunate that Linux has come to depend on things being set in a
certain way.
For example, on the NXP LS1028A-RDB, the felix switch ports are
connected
This snippet of code has a bothering "if (...) return 0" in it which
assumes it is the last piece of code running in dsa_port_probe().
This makes it difficult to add further code at the end of dsa_port_probe()
which does not depend on MAC address stuff.
So move the code to a dedicated function
Some drivers might want to execute code for each port at probe time, as
opposed to executing code just-in-time for the port selected for
networking.
To cater to that use case, introduce a .port_probe() callback method
into the DSA switch operations which is called for each available port,
at the
Make sure that the link status returned by phy_startup() is propagated
to the .start() method of struct eth_ops.
Signed-off-by: Vladimir Oltean
Reviewed-by: Ramon Fried
Tested-by: Michael Walle
---
drivers/net/mscc_eswitch/felix_switch.c | 4 +---
1 file changed, 1 insertion(+), 3
DM DSA uses "err" for error code values, so use this consistently.
Signed-off-by: Vladimir Oltean
Reviewed-by: Ramon Fried
Tested-by: Michael Walle
---
net/dsa-uclass.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/dsa-uclass.c b/net/dsa-uclass.c
index
Changes in v2:
Rebased on top of the master branch (solves this conflict:
https://patchwork.ozlabs.org/project/uboot/patch/20210629170839.2583797-4-olte...@gmail.com/
with Tim Harvey's patch to make DSA masters promiscuous)
This series makes the Felix DSA driver initialize all its connected PHYs
No one is calling this function from outside felix_switch.c.
Signed-off-by: Vladimir Oltean
Reviewed-by: Ramon Fried
Tested-by: Michael Walle
---
drivers/net/mscc_eswitch/felix_switch.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/mscc_eswitch/felix_switch.c
On Tuesday 24 August 2021 07:28:07 Christophe Leroy wrote:
> Le 08/08/2021 à 13:20, Pali Rohár a écrit :
> > It is unknown why version string is placed at specific position on these
> > powerpc mpc platforms. But there is no need to overload version_string
> > symbol. Just use common definition of
As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.
U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.
[1]
Select IMX_HAB to allow secure boot.
Signed-off-by: Fabio Estevam
---
configs/smegw01_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/smegw01_defconfig b/configs/smegw01_defconfig
index 8e2e95765b..0c980213b8 100644
--- a/configs/smegw01_defconfig
+++
Add redundant environment support as it is required
by SWUpdate.
While at it, place the CONFIG_ENV_OFFSET at 0x10 to allow
more headroom.
Signed-off-by: Fabio Estevam
---
configs/smegw01_defconfig | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git
When using SWUpdate, it is necessary to toggle between partitions.
Use the 'mmcpart' environment variable to accomplish that.
Signed-off-by: Fabio Estevam
---
include/configs/smegw01.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/configs/smegw01.h
Acked-by: Marek Behún
Acked-by: Marek Behún
Hi Paul,
On 24/08/2021 06:44, Ying-Chun Liu wrote:
From: "Ying-Chun Liu (PaulLiu)"
When purchasing imx8mm-cl-iot-gate it is able to customize the
memory size. It could be 1GB, 2GB and 4GB. We implement
board_phys_sdram_size() to detect the memory size for usage.
Signed-off-by: Ying-Chun Liu
> Date: Mon, 23 Aug 2021 16:01:46 -0400
> From: Tom Rini
>
> On Mon, Aug 23, 2021 at 11:25:42AM -0600, Simon Glass wrote:
> > Hi Mark,
> >
> > On Mon, 23 Aug 2021 at 05:54, Mark Kettenis wrote:
> > >
> > > > From: Simon Glass
> > > > Date: Wed, 18 Aug 2021 21:45:33 -0600
> > > >
> > > >
From: Bharat Gooty
Add pinctrl_ops->request api to configure pctrl
pad register in gpio mode.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
---
drivers/pinctrl/pinctrl-single.c | 34
1 file changed, 34 insertions(+)
diff --git
From: Bharat Gooty
Parse different gpio properties from dt as part of probe
function. This detail is required to enable pinctrl pad
later when gpio lines are requested.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
---
drivers/pinctrl/pinctrl-single.c | 52
From: Bharat Gooty
pinctrl-single:-
Add support to parse "pinctrl-single,gpio-range" and
"#pinctrl-single,gpio-range-cells" DT properties
Add pinctrl_ops request()
Bharat Gooty (2):
pinctrl: single: Parse gpio details from dt
pinctrl: single: Add request() api
Dear Christophe,
In message <75ae39aa-3762-6b90-c39a-7595fc417...@csgroup.eu> you wrote:
>
> > Also, could you look at this, why version string is at specific location
> > of u-boot.bin header?
>
> I have no idea. AFAIKS it's been like that since the first version
> in git in 2002. Maybe
From: "Ying-Chun Liu (PaulLiu)"
When purchasing imx8mm-cl-iot-gate it is able to customize the
memory size. It could be 1GB, 2GB and 4GB. We implement
board_phys_sdram_size() to detect the memory size for usage.
Signed-off-by: Ying-Chun Liu (PaulLiu)
Cc: Fabio Estevam
Cc: Frieder Schrempf
From: "Ying-Chun Liu (PaulLiu)"
When purchasing imx8mm-cl-iot-gate it is able to customize the
memory size. It could be 1GB, 2GB and 4GB. We implement
board_phys_sdram_size() to detect the memory size for usage.
This patch was trying to fix the regression on mainline U-boot for
Le Mon, 23 Aug 2021 07:42:58 +,
a écrit :
> On 8/4/21 5:55 PM, Clément Léger wrote:
> > When SYSRESET is enabled, cpu_reset function is also defined in
> > sysreset-uclass.c which lead to multiple definitions of this
> > function since reset.c is build unconditionally. Add a check in
> >
Hi Tom,
> > > > > > >
[...]
> > > > > > > The series is available at u-boot-dm/bmea-working
> > > > > >
> > > > > > My question / concern is this. Would the next step here be to
> > > > > > implement the generic UEFI boot path? Today, I can write Fedora 34
> > > > > > for
> > > > > > AArch64
On Tue, 24 Aug 2021 at 08:11, Fabio Estevam wrote:
> Currently imx8mm-cl-iot-gate_defconfig fails to produce a working boot
> binary due to the lack of fip.bin:
>
> " BINMAN all
> Image 'main-section' is missing external blobs and is non-functional:
> blob-ext
>
> Some images are invalid"
>
>
From: Sven Auhagen
Since mvpp2 is using the new mdio driver and the cp110 has been
synced with the linux upstream, the mdio has to enabled in the
device tree file.
This is missing for some device tree files and therefore the
network cards do not come online.
Signed-off-by: Sven Auhagen
---
Since derivatives are moving to binman from usage of the FIT generator
script, and considering the warning introduced in f4a43d2925
("Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR"), usage of FIT
generator is discouraged.
Current FIT generator also generates broken output, since commit
Hi Sjoerd,
> The RPI firmware adjusts several property values in the dtb it passes
> to u-boot depending on the board/SoC revision. Inherit some of these
> when u-boot loads a dtb itself. Specificaly copy:
Overall this looks great.
> * /model: The firmware provides a more specific string
> *
On 23.08.21 04:43, Ying-Chun Liu wrote:
> From: "Ying-Chun Liu (PaulLiu)"
>
> When TEE is loaded, we need to restrict the memory usage based
> on rom_pointer[0]
>
> Signed-off-by: Ying-Chun Liu (PaulLiu)
> Cc: Fabio Estevam
> Cc: Frieder Schrempf
> Cc: uboot-imx
Reviewed-by: Frieder
Christophe
Sorry, this one slipped by somehow.
> On Aug 23, 2021, at 10:18 PM, Christophe Leroy
> wrote:
>
> Forgot to CC the list
>
> Le 24/08/2021 à 07:17, Christophe Leroy a écrit :
>> Jway, Alex,
>> Your commit 047e31ed4b4d ("led: led_cortina: Add CAxxx LED support") changed
>> the
80 matches
Mail list logo