disabled use of JR0 in SPL and uboot, as JR0 is reserved
for secure boot.
Signed-off-by: Gaurav Jain
Reviewed-by: Ye Li
---
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 18 +-
arch/arm/dts/imx8mm.dtsi | 1 +
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 18 ++
i.MX8MM/MN/MP/MQ - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain
Reviewed-by: Ye Li
---
arch/arm/Kconfig | 2 +-
arch/arm/include/asm/arch-imx8m/imx-regs.h | 1 +
arch/arm/ma
From: Ye Li
Because we don't use SPL_DM on mx6sabresd and mx6sabreauto, so it is
unnecessary to have SPL DTB related configs and SPL_OF_CONTROL enabled.
Signed-off-by: Ye Li
Reviewed-by: Fabio Estevam
Reviewed-by: Gaurav Jain
---
configs/mx6sabreauto_defconfig | 2 --
configs/mx6sabresd_defc
i.MX6,i.MX6SX,i.MX6UL - added support for JR driver model.
removed sec_init() call, sec is initialized based on
job ring information processed from device tree.
Signed-off-by: Gaurav Jain
Reviewed-by: Ye Li
---
arch/arm/mach-imx/mx6/Kconfig | 20
arch/arm/mach-imx/mx6/soc.
i.MX7D - added support for JR driver model.
removed sec_init() call, sec is initialized based on
job ring information processed from device tree.
Signed-off-by: Gaurav Jain
Reviewed-by: Ye Li
---
arch/arm/Kconfig | 2 +-
arch/arm/mach-imx/mx7/Kconfig | 3 +++
arch/arm/mach-imx/m
added crypto node in device tree.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain
Reviewed-by: Ye Li
---
arch/arm/Kconfig | 2 +-
arch/arm/dts/imx7ulp.dtsi| 24
arch/arm/mach-imx/mx7ulp/Kco
i.MX8(QM/QXP) - updated device tree for supporting DM in SPL.
disabled use of JR1 in SPL and uboot, as JR1 is reserved
for SECO FW.
Signed-off-by: Gaurav Jain
Reviewed-by: Ye Li
---
arch/arm/dts/fsl-imx8dx.dtsi | 61 +++-
arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
i.MX8(QM/QXP) - added support for JR driver model.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain
Signed-off-by: Horia Geantă
Reviewed-by: Ye Li
---
arch/arm/Kconfig | 3 +++
arch/arm/include/asm/arch-imx8/imx-r
From: Ye Li
fix hwrng performance issue in kernel.
Signed-off-by: Ye Li
Acked-by: Gaurav Jain >
---
drivers/crypto/fsl/jr.c | 109 ++--
include/fsl_sec.h | 1 +
2 files changed, 94 insertions(+), 16 deletions(-)
diff --git a/drivers/crypto/fsl/jr.c
LS(1021/1012/1028/1043/1046/1088/2088), LX2160 - updated device tree
Signed-off-by: Gaurav Jain
Reviewed-by: Priyanka Jain
---
arch/arm/dts/fsl-ls1012a.dtsi | 46 ++-
arch/arm/dts/fsl-ls1028a.dtsi | 41 ++-
arch/arm/dts/fsl-ls1043a.dts
LS(1021/1012/1028/1043/1046/1088/2088), LX2160, LX2162
platforms are enabled with JR driver model.
removed sec_init() call from board files.
removed CONFIG_FSL_CAAM from defconfig files.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain
Revie
device tree imported from linux kernel.
c500bee1c5b2 (tag: v5.14-rc4) Linux 5.14-rc4
Signed-off-by: Gaurav Jain
Reviewed-by: Priyanka Jain
---
arch/powerpc/dts/p2041si-post.dtsi | 1 +
arch/powerpc/dts/p3041si-post.dtsi | 1 +
arch/powerpc/dts/p4080si-post.dtsi | 1 +
arch/powerpc/dts/
removed sec_init() call and CONFIG_FSL_CAAM from defconfig.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain
Reviewed-by: Priyanka Jain
---
arch/powerpc/cpu/mpc85xx/Kconfig | 44 +++
arch/powerpc/cpu/mpc85xx/cpu
Signed-off-by: Gaurav Jain
---
MAINTAINERS | 7 +++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 40a0e7ac72..e2f601d7cc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1258,3 +1258,10 @@ T: git https://source.denx.de/u-boot/u-boot.git
F: configs/tool
On 04/10/21, Alex G. wrote:
> On 10/4/21 3:32 PM, Jorge Ramirez-Ortiz, Foundries wrote:
> > Hello,
> >
hi Alex,
> > We are enabling secure boot on Zynqmp with SPL.
> >
> > The issue however is that during secure boot, the bootrom not only
> > validates the first loader (SPL and PMUFW combo) but
On 05/10/21, Jorge Ramirez-Ortiz, Foundries wrote:
> On 04/10/21, Alex G. wrote:
> > On 10/4/21 3:32 PM, Jorge Ramirez-Ortiz, Foundries wrote:
> > > Hello,
> > >
>
> hi Alex,
>
> > > We are enabling secure boot on Zynqmp with SPL.
> > >
> > > The issue however is that during secure boot, the boo
Please note that this is not a resubmission of fdt_add_pubkey, I merely
mentioned that in passing (and cc'ed Roman because of his interest in
that) as a previous attempt at solving the problem of getting the public
key info baked into U-Boot's .dtb, an approach that I've since learnt is
not without
On 02/10/2021 02.38, Simon Glass wrote:
> At present U-Boot environment variables, and thus scripts, are defined
> by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text
> to this file and dealing with quoting and newlines is harder than it
> should be. It would be better if we co
On 03.10.21 20:40, Tom Rini wrote:
> On Sat, Sep 18, 2021 at 08:17:54AM +0200, Jan Kiszka wrote:
>
>> From: Jan Kiszka
>>
>> Add the DT entry for a watchdog based on RTI1. It requires additional
>> firmware on the MCU R5F cores to handle the expiry, e.g.
>> https://github.com/siemens/k3-rti-wdt.
On Sunday 03 October 2021 11:53:45 Stefan Roese wrote:
> Select SPL_SKIP_LOWLEVEL_INIT on 32bit Armada platforms via Kconfig,
> as this was removed from mach/config.h in a2ac2b96 ("Convert
> CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig").
>
> Signed-off-by: Stefan Roese
> Fixes: a2ac2b96 ("Convert
This converts the CONFIG_STM32_FLASH to Kconfig by using
tools/moveconfig.py
Signed-off-by: Patrick Delaunay
---
configs/stm32f429-discovery_defconfig | 1 +
configs/stm32f429-evaluation_defconfig | 1 +
configs/stm32f469-discovery_defconfig | 1 +
configs/stm32f746-disco_defconfig | 1 +
On 2021-09-30 18:09, Andre Przywara wrote:
> On Tue, 28 Sep 2021 10:01:40 +0200
> Stefan Agner wrote:
>
>> The current code invalidates the range after the read buffer since the
>> buffer pointer gets incremented in the read loop. Use a temporary
>> pointer to make sure we have a pristine pointer
Using the tools moveconfig.py to move the following config in the
defconfig files:
CONFIG_USB_HOST_ETHER
CONFIG_USB_ETHER_ASIX
CONFIG_USB_ETHER_MCS7830
CONFIG_USB_ETHER_SMSC95XX
These option are already migrated since the commit f58ad98a621c ("usb: net:
migrate USB Ethernet adapters to Kconfig
The current code invalidates the range after the read buffer since the
buffer pointer gets incremented in the read loop. Use a temporary
pointer to make sure we have a pristine pointer to invalidate the
correct memory range after read.
Fixes: 704e040a51d2 ("nvme: Apply cache operations on the DMA
> From: Patrick Delaunay
> Date: Mon, 4 Oct 2021 11:23:41 +0200
>
> Using the tools moveconfig.py to move the following config in the
> defconfig files:
> CONFIG_USB_HOST_ETHER
> CONFIG_USB_ETHER_ASIX
> CONFIG_USB_ETHER_MCS7830
> CONFIG_USB_ETHER_SMSC95XX
>
> These option are already migrate
On Mon, Oct 04, 2021 at 11:33:45AM +0200, Mark Kettenis wrote:
>
> > From: Patrick Delaunay
> > Date: Mon, 4 Oct 2021 11:23:41 +0200
> >
> > Using the tools moveconfig.py to move the following config in the
> > defconfig files:
> > CONFIG_USB_HOST_ETHER
> > CONFIG_USB_ETHER_ASIX
> > CONFIG_US
This define was left over from a previous revision, and was never used.
Signed-off-by: Patrick Delaunay
---
include/configs/am335x_sl50.h | 7 ---
scripts/config_whitelist.txt | 1 -
2 files changed, 8 deletions(-)
diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h
Redefine the macro CONFIG_IS_ENABLED is not allowed,
so this entry can be removed in whitelist file.
Signed-off-by: Patrick Delaunay
---
scripts/config_whitelist.txt | 1 -
1 file changed, 1 deletion(-)
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index b3ebd20c57..
Remove the latest reference of CONFIG_CONS_NONE in code
Signed-off-by: Patrick Delaunay
---
include/configs/MPC8560ADS.h | 1 -
scripts/config_whitelist.txt | 1 -
2 files changed, 2 deletions(-)
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 3a9ea03292..dcd538f
Remove the latest reference of CONFIG_SYS_FLASH_AMD_CHECK_DQ7 in code
Signed-off-by: Patrick Delaunay
---
include/configs/P2041RDB.h | 1 -
include/configs/corenet_ds.h | 1 -
scripts/config_whitelist.txt | 1 -
3 files changed, 3 deletions(-)
diff --git a/include/configs/P2041RDB.h b/includ
Remove the latest reference of CONFIG_NO_RELOCATION in code
Signed-off-by: Patrick Delaunay
---
include/configs/thunderx_88xx.h | 1 -
scripts/config_whitelist.txt| 1 -
2 files changed, 2 deletions(-)
diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h
index 1ce
Remove some config finishing by _ badly added by
scripts/build-whitelist.sh when joker is used in comments.
for example:
doc/uImage.FIT/command_syntax_extensions.txt:
... #ifdef CONFIG_OF_* | ...
cmd/nvedit.c:# error Define one of CONFIG_ENV_IS_IN_{EEPROM| \
FLASH|MMC|FAT|EXT4|\
On 30.09.21 23:08, Michael Walle wrote:
> Am 2021-09-30 19:17, schrieb Frieder Schrempf:
>> On 30.09.21 18:35, Michael Walle wrote:
>>> Am 2021-09-30 18:19, schrieb Frieder Schrempf:
In order to support unaligned updates, we simply read the first full
block and check only the requested pa
On 30.09.21 23:21, Michael Walle wrote:
> Am 2021-09-30 18:19, schrieb Frieder Schrempf:
>> From: Frieder Schrempf
>>
>> Currently 'sf update' supports only offsets that are aligned to the
>> erase block size of the serial flash. Unaligned offsets result in
>> something like:
>>
>> => sf update ${
On Fri, Sep 24, 2021 at 10:42 AM Alexandre Ghiti
wrote:
>
> As there is no GPIO to reset the HiFive Unmatched board, we must directly
> ask the da9063 PMIC for a reset: this small patchset adds the corresponding
> sysreset driver and enables it for this board.
>
> As the probing of this new device
Am 2021-10-04 12:31, schrieb Frieder Schrempf:
On 30.09.21 23:08, Michael Walle wrote:
Printing a warning might scare users, though. I'd prefer to fix the
online help, where only "erase and write" is mentioned.
Which document are you referring to? I don't really see the "sf"
command
docume
This reverts commit d5d726d3cc47691ace3c68fa31147ad104aaf579,
which breaks boards which ship with multiple SD/eMMC sockets.
This stm32mp1.h config is not used only by the ST reference
boards, but all the other STM32MP1 based boards in U-Boot, so
changes to this stm32mp1.h cannot break the other bo
Dear Simon,
In message <20211002003848.1803446-3-...@chromium.org> you wrote:
>
> +baudrate
> +see CONFIG_BAUDRATE
> +
> +bootdelay
> +see CONFIG_BOOTDELAY
> +
> +bootcmd
> +see CONFIG_BOOTCOMMAND
I know you only copied this, but the text is actually not helpful,
as it does not even m
Dear Simon,
In message
<20211001183842.v5.3.If789ba3e2667c46c03eda3386ca84a863baeda55@changeid> you
wrote:
>
> Add a feature that brings in a .env file associated with the board
> config, if present. To use it, create a file in a board//env
> directory called .env (or common.env if you want the
Dear Simon Glass,
In message
<20211001183842.v5.4.Ie78bfbfca0d01d9cba501e127f446ec48e1f7afe@changeid> you
wrote:
> In many cases environment variables need access to the U-Boot CONFIG
> variables to select different options. Enable this so that the environment
> scripts can be as useful as the o
Current CP1 pinctrl that is set on the Puzzle M801 is incorrect.
CP1 pins are only used for the SMI bus and the MSS I2C, all other
pins are just GPIO-s.
Due to this being set completely wrong, the pinctrl was actually
ended up being hardcoded in the board_early_init_f() step so that
SMI would work
Since the CP1 pinctrl is not properly set in the DTS, there is no
need for setting the pinctrl by writing hardcoded values to the MPP
registers.
So, drop the code relating to that.
Fixes: 87c220d0 ("arm: mvebu: mvebu_armada-8k: Add support for initializing iEi
Puzzle-M801 networking")
Signed-off
Hi,
On 9/8/21 1:59 AM, Alexandru Gagniuc wrote:
Although Falcon mode is very useful in improving boot speed, its
implementation is quite antiquated. A question that Falcon mode asks
is "Where do I look for the kernel". With MMC boot media, the correct
answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_S
On Tue, Sep 14, 2021 at 05:21:48AM +0200, Marek Vasut wrote:
> Both dummy.nbytes and dummy.buswidth may be zero. By not checking
> the later, it is possible to trigger division by zero and a crash.
> This does happen with tiny SPI NOR framework in SPL. Fix this by
> adding the check and returning
On 13.09.21 09:48, Jan Kiszka wrote:
> Hi all,
>
> Chao, please no top-post on mailing list. Also check your mail client,
> it seems to inject a lot of bogus newlines.
>
> On 08.09.21 06:55, chaochao2021666 wrote:
>>
>>
>>
>> HI Jagan
>>
>>
>>
>> sorry for the delay response.
>>
>>
>> And I have
On Wed, 29 Sep 2021 09:33:18 -0700
Tim Harvey thar...@gateworks.com wrote:
...
> One last question on this. I have never used U-Boot vidconsole before.
> It does work if I 'setenv stdout serial,videconsole' but if I saveenv
> and reboot vidconsole is not enabled. Should I expect it to be or is
> i
After DM_VIDEO conversion the 'vidconsole' is the correct name
for the frame buffer console. 'video' will not work, so update
the description of the config option.
Signed-off-by: Anatolij Gustschin
---
common/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/
On 10/1/21 1:08 PM, T Karthik Reddy wrote:
> Mini emmc does not use any pmufw and ZYNQMP_FIRMWARE is disabled.
> xilinx_pm_request() will not be compiled and causes undefined reference to
> `xilinx_pm_request' error. So add a weak function in zynq_sdhci.c file.
>
> Signed-off-by: T Karthik Redd
On 10/4/21 05:44, AKASHI Takahiro wrote:
# Resending the RFC as some of patches were deplicately submitted.
# See also
https://git.linaro.org/people/takahiro.akashi/u-boot.git efi/dm_disk
The purpose of this RPC is to reignite the discussion about how UEFI
subystem would best be integrated
Hi,
On 9/8/21 1:59 AM, Alexandru Gagniuc wrote:
Falcon mode requires a board-specific mechanism to select between
fast and normal boot. This is done via spl_start_uboot()
Use the USER2 button as the selection mechanism. This is connected to
GPIO PA13. This GPIO is already accessible via the "st
Hi Alexandru
On 9/8/21 1:59 AM, Alexandru Gagniuc wrote:
My goal when I started on this project a year ago was to get to linux
userspace within a second from power on. Oh, and it had to be secure!
Contrast that to the two minutes it took the STLinux demo to come up.
It was obvious that the acce
i.MX31 support was removed, and the non dm-video driver
is obsolete and not used. Remove it.
Signed-off-by: Anatolij Gustschin
---
drivers/video/Makefile | 1 -
drivers/video/cfb_console.c | 7 -
drivers/video/mx3fb.c | 906
3 files changed, 91
Hey all,
It is release day and here is v2021.10. With this release
we are now at the third of our 2 years past a number of DM migration
deadlines. We're now at the point where it's watchdog related
migrations that are past due. This is actually a small list of boards
and I think can be quickly
Move CONFIG_VIDEO_MXS from board headers to Kconfig
and drop it from obsolete cfb_console driver.
Signed-off-by: Anatolij Gustschin
---
I'm CCing board maintainers, please review/ack.
configs/colibri-imx6ull_defconfig | 1 +
configs/colibri_imx7_defconfig| 1 +
configs/imxrt1050-evk_defconf
On Mon, Oct 04, 2021 at 09:28:43AM +0200, Rasmus Villemoes wrote:
> On 02/10/2021 02.38, Simon Glass wrote:
> > At present U-Boot environment variables, and thus scripts, are defined
> > by CONFIG_EXTRA_ENV_SETTINGS. It is painful to add large amounts of text
> > to this file and dealing with quot
On 04.10.21 01:34, Tom Rini wrote:
> On Sat, Sep 18, 2021 at 08:17:53AM +0200, Jan Kiszka wrote:
>
>> From: Jan Kiszka
>>
>> This adds support for the IOT2050 Basic and Advanced devices. The Basic
>> used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS
>> quad-core version.
>>
>
On Mon, Oct 04, 2021 at 05:54:46PM +0200, Jan Kiszka wrote:
> On 04.10.21 01:34, Tom Rini wrote:
> > On Sat, Sep 18, 2021 at 08:17:53AM +0200, Jan Kiszka wrote:
> >
> >> From: Jan Kiszka
> >>
> >> This adds support for the IOT2050 Basic and Advanced devices. The Basic
> >> used the dual-core AM65
Hi Anatolij,
On Mon, Oct 4, 2021 at 12:33 PM Anatolij Gustschin wrote:
>
> Move CONFIG_VIDEO_MXS from board headers to Kconfig
> and drop it from obsolete cfb_console driver.
>
> Signed-off-by: Anatolij Gustschin
> ---
> I'm CCing board maintainers, please review/ack.
Reviewed-by: Fabio Estevam
Hi,
On 10/4/21 1:48 PM, Marek Vasut wrote:
This reverts commit d5d726d3cc47691ace3c68fa31147ad104aaf579,
which breaks boards which ship with multiple SD/eMMC sockets.
This stm32mp1.h config is not used only by the ST reference
boards, but all the other STM32MP1 based boards in U-Boot, so
change
On 04.10.21 18:02, Tom Rini wrote:
> On Mon, Oct 04, 2021 at 05:54:46PM +0200, Jan Kiszka wrote:
>> On 04.10.21 01:34, Tom Rini wrote:
>>> On Sat, Sep 18, 2021 at 08:17:53AM +0200, Jan Kiszka wrote:
>>>
From: Jan Kiszka
This adds support for the IOT2050 Basic and Advanced devices. T
On 10/4/21 6:34 PM, Patrick DELAUNAY wrote:
Hi,
Hi,
On 10/4/21 1:48 PM, Marek Vasut wrote:
This reverts commit d5d726d3cc47691ace3c68fa31147ad104aaf579,
which breaks boards which ship with multiple SD/eMMC sockets.
This stm32mp1.h config is not used only by the ST reference
boards, but all
On Mon, Oct 04, 2021 at 11:11:08AM -0400, Tom Rini wrote:
> Hey all,
>
> It is release day and here is v2021.10. With this release
> we are now at the third of our 2 years past a number of DM migration
> deadlines. We're now at the point where it's watchdog related
> migrations that are past d
This has not been supported by toolchains for some time and has been
putting out a warning. Drop this.
Signed-off-by: Tom Rini
---
arch/powerpc/cpu/mpc8xx/config.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/cpu/mpc8xx/config.mk
b/arch/powerpc/cpu/mpc8xx/c
On Mon, Oct 04, 2021 at 04:47:53PM +0200, Heinrich Schuchardt wrote:
>
>
> >
[...]
> > My approach in this RFC:
> >
> > Due to functional differences in semantics, it would be difficult
> > to identify "udevice" structure as a handle in UEFI world. Instead, we will
> >
Hi Akashi-san,
>
[...]
> +int blk_create_partitions(struct udevice *parent)
> +{
> + int part, count;
> + struct blk_desc *desc = dev_get_uclass_plat(parent);
> + struct disk_partition info;
> + struct disk_part *part_data;
> + char devname[32];
> + struct udevice *dev;
On Mon, Oct 04, 2021 at 12:44:14PM +0900, AKASHI Takahiro wrote:
> Every time a sata bus/port is scanned and a new device is detected,
> we want to call device_probe() as it will give us a chance to run additional
> post-processings for some purposes.
>
> In particular, support for creating partit
On Mon, Oct 04, 2021 at 12:44:22PM +0900, AKASHI Takahiro wrote:
> Add efi_disk_create() function.
>
> Any UEFI handle created by efi_disk_create() can be treated as a efi_disk
> object, the udevice is either a UCLASS_BLK (a whole raw disk) or
> UCLASS_PARTITION (a disk partition).
>
> So this fu
On Sun, 03 Oct 2021 12:50:06 -0600, Simon Glass wrote:
> Add missing hyphens and reword one sentence for clarity.
>
> Signed-off-by: Simon Glass
> ---
>
> .../devicetree/bindings/example-schema.yaml | 14 -
> .../devicetree/bindings/writing-bindings.rst | 2 +-
> .../devicetree/bind
On Sun, Oct 03, 2021 at 12:51:53PM -0600, Simon Glass wrote:
> U-Boot makes use of the devicetree for its driver model. Devices are bound
> based on the hardware description in the devicetree.
>
> Since U-Boot is not an operating system, it has no command line or user
> space to provide configurat
Hello,
We are enabling secure boot on Zynqmp with SPL.
The issue however is that during secure boot, the bootrom not only
validates the first loader (SPL and PMUFW combo) but it will also
expect a signed bitstream during load(FPGA).
Since currently the SPL load of an FPGA image from FIT does not
On 10/4/21 3:32 PM, Jorge Ramirez-Ortiz, Foundries wrote:
Hello,
We are enabling secure boot on Zynqmp with SPL.
The issue however is that during secure boot, the bootrom not only
validates the first loader (SPL and PMUFW combo) but it will also
expect a signed bitstream during load(FPGA).
Sin
On Mon, 26 Jul 2021 18:19:48 +0200 (CEST)
Manuel Dipolt wrote:
Hi Manuel,
> This patch enables clock for the r_pio gpios for the h3
Thanks for the patch, but can you say what this is needed for or what
it fixes?
Also this patch looks mangled, the leading spaces in the diff context
are gone, a
> -Original Message-
> From: Roman Bacik
> Sent: Friday, October 1, 2021 3:40 PM
> To: U-Boot Mailing List
> Cc: Bharat Gooty ; Rayagonda Kokatanur
> ; Roman Bacik
> ; Dario Binacchi ;
> Pratyush Yadav ; Simon Glass ;
> Vignesh Raghavendra
> Subject: [PATCH v2 1/2] pinctrl: single: Parse
Hi Takahiro,
On Sun, 3 Oct 2021 at 21:44, AKASHI Takahiro wrote:
>
> # Resending the RFC as some of patches were deplicately submitted.
> # See also
> https://git.linaro.org/people/takahiro.akashi/u-boot.git efi/dm_disk
>
> The purpose of this RPC is to reignite the discussion about how UEFI
>
On Sat, 2 Oct 2021 23:32:34 +0200
Nikola Pavlica wrote:
Hi Nikola,
> This patch uses the (almost) the same settings as those found in the
> original Android firmware. As such, it gurantees good compatibility.
>
> V2: Small fixes/changes to the config
>
> V3: Checkpatch fixes
Please try to fi
On Sun, 3 Oct 2021 21:16:54 +0800
Chukun Pan wrote:
> This adds support for the NanoPi R1S H5 board.
>
> Allwinner H5 SoC
> 512MB DDR3 RAM
> 10/100/1000M Ethernet x 2
> RTL8189ETV WiFi 802.11b/g/n
> USB 2.0 host port (A)
> MicroSD Slot
> Reset button
> Serial Debug Port
> WAN - LAN - SYS LED
>
On Thu, Sep 02, 2021 at 06:45:29PM +0200, Michael Walle wrote:
> This series sync the device tree of the LS1028A SoC with the linux one.
> To ease future debugging and reviewing, we first clean up the existing one,
> removing bogus nodes, moving all CCSR related nodes in /soc and update the
> drive
On Mon, Oct 04, 2021 at 09:45:35PM +0300, Ilias Apalodimas wrote:
> On Mon, Oct 04, 2021 at 12:44:14PM +0900, AKASHI Takahiro wrote:
> > Every time a sata bus/port is scanned and a new device is detected,
> > we want to call device_probe() as it will give us a chance to run additional
> > post-proc
On Mon, Oct 04, 2021 at 09:40:21PM +0300, Ilias Apalodimas wrote:
> Hi Akashi-san,
>
> >
>
> [...]
>
> > +int blk_create_partitions(struct udevice *parent)
> > +{
> > + int part, count;
> > + struct blk_desc *desc = dev_get_uclass_plat(parent);
> > + struct disk_partition info;
> > + s
On Mon, Oct 04, 2021 at 09:50:02PM +0300, Ilias Apalodimas wrote:
> On Mon, Oct 04, 2021 at 12:44:22PM +0900, AKASHI Takahiro wrote:
> > Add efi_disk_create() function.
> >
> > Any UEFI handle created by efi_disk_create() can be treated as a efi_disk
> > object, the udevice is either a UCLASS_BLK
On Mon, Oct 04, 2021 at 04:47:53PM +0200, Heinrich Schuchardt wrote:
>
>
> On 10/4/21 05:44, AKASHI Takahiro wrote:
> > # Resending the RFC as some of patches were deplicately submitted.
> > # See also
> >https://git.linaro.org/people/takahiro.akashi/u-boot.git efi/dm_disk
> >
> > The purpos
On Mon, Oct 04, 2021 at 09:07:35PM +0300, Ilias Apalodimas wrote:
> On Mon, Oct 04, 2021 at 04:47:53PM +0200, Heinrich Schuchardt wrote:
> >
> >
> > >
>
> [...]
>
> > > My approach in this RFC:
> > >
> > > Due to functional differences in semantics, it would be difficu
This patchset adds the support for following:
1) CAAM Driver model for all i.MX, layerscape, PPC platforms.
2) Added crypto node in device tree files.
3) CAAM support for blob key encryption key(bkek), random number generation.
4) fix build issue for mx6sabre: Remove SPL DTB related configs and
SP
added device tree support for job ring driver.
sec is initialized based on job ring information processed
from device tree.
Signed-off-by: Gaurav Jain
Reviewed-by: Ye Li
---
cmd/Kconfig | 1 +
drivers/crypto/fsl/Kconfig | 7 +
drivers/crypto/fsl/Makefile | 3 +-
drivers/c
added api and descriptor for blob key encryption key(bkek) generation.
added api for random number generation.
Signed-off-by: Gaurav Jain
Signed-off-by: Ji Luo
Reviewed-by: Ye Li
---
drivers/crypto/fsl/desc.h | 5 +++
drivers/crypto/fsl/fsl_blob.c | 82 +++
85 matches
Mail list logo