i.MX6,i.MX6SX,i.MX6UL - added support for JR driver model. removed sec_init() call, sec is initialized based on job ring information processed from device tree.
Signed-off-by: Gaurav Jain <gaurav.j...@nxp.com> Reviewed-by: Ye Li <ye...@nxp.com> --- arch/arm/mach-imx/mx6/Kconfig | 20 ++++++++++++++++++++ arch/arm/mach-imx/mx6/soc.c | 12 ++++++++---- 2 files changed, 28 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index 515c3020fa..8553a23309 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -346,6 +346,10 @@ config TARGET_MX6SABREAUTO select DM_THERMAL select SUPPORT_SPL imply CMD_DM + select FSL_CAAM + select FSL_BLOB + select MISC + select ARCH_MISC_INIT config TARGET_MX6SABRESD bool "mx6sabresd" @@ -356,6 +360,10 @@ config TARGET_MX6SABRESD select DM_THERMAL select SUPPORT_SPL imply CMD_DM + select FSL_CAAM + select FSL_BLOB + select MISC + select ARCH_MISC_INIT config TARGET_MX6SLEVK bool "mx6slevk" @@ -378,6 +386,10 @@ config TARGET_MX6SXSABRESD select DM select DM_THERMAL select SUPPORT_SPL + select FSL_CAAM + select FSL_BLOB + select MISC + select ARCH_MISC_INIT config TARGET_MX6SXSABREAUTO bool "mx6sxsabreauto" @@ -396,6 +408,10 @@ config TARGET_MX6UL_9X9_EVK select DM_THERMAL select SUPPORT_SPL imply CMD_DM + select FSL_CAAM + select FSL_BLOB + select MISC + select ARCH_MISC_INIT config TARGET_MX6UL_14X14_EVK bool "mx6ul_14x14_evk" @@ -405,6 +421,10 @@ config TARGET_MX6UL_14X14_EVK select DM_THERMAL select SUPPORT_SPL imply CMD_DM + select FSL_CAAM + select FSL_BLOB + select MISC + select ARCH_MISC_INIT config TARGET_MX6UL_ENGICAM bool "Support Engicam GEAM6UL/Is.IoT" diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index aacfc854a2..fa6c3778bb 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -4,6 +4,7 @@ * Sascha Hauer, Pengutronix * * (C) Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2021 NXP */ #include <common.h> @@ -23,7 +24,6 @@ #include <asm/arch/mxc_hdmi.h> #include <asm/arch/crm_regs.h> #include <dm.h> -#include <fsl_sec.h> #include <imx_thermal.h> #include <mmc.h> @@ -734,9 +734,13 @@ static void setup_serial_number(void) int arch_misc_init(void) { -#ifdef CONFIG_FSL_CAAM - sec_init(); -#endif + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev); + if (ret) + printf("Failed to initialize %s: %d\n", dev->name, ret); + setup_serial_number(); return 0; } -- 2.17.1