From: Dominic Rath
This driver is based on an older downstream TI kernel, with
changes and cleanups to work with mainline device-tree bindings.
Signed-off-by: Dominic Rath
Signed-off-by: Christian Gmeiner
---
drivers/net/phy/Kconfig | 6 +
drivers/net/phy/Makefile |
As the document said, I tried added "#define DEBUG" in each file but it
doesn't work.
If I add "#define debug printf" then, of course debug() is printed.
-Original Message-
From: U-Boot On Behalf Of Chan Kim
Sent: Wednesday, December 22, 2021 3:13 PM
To: U-Boot Mailing List
Subject: prin
Hello all,
I'm trying to boot from RAM using SPL only.
(Another scp processor loads the FIT image to the SDRAM before starting
u-boot-spl is started)
Since the debugger doesn't work yet, I have to rely on prints to debug.
The printf works fine (I once asked about initializing serial port he
On Mon, Dec 20, 2021 at 7:12 PM Andre Przywara wrote:
> From: Peter Hoyes
>
> Create a new documentation section for Arm Ltd boards with a sub-page
> for the FVP VExpress64 system.
>
> Signed-off-by: Peter Hoyes
> [Andre: remove Juno stub, RSTify]
> Signed-off-by: Andre Przywara
Reviewed-by:
On Mon, Dec 20, 2021 at 7:12 PM Andre Przywara wrote:
> The Juno Arm development board is an open, vendor-neutral, Armv8-A
> development platform.
> Add documentation that briefly outlines the hardware, and describes
> building and installation of U-Boot.
>
> Signed-off-by: Andre Przywara
This
Hi Peter,
On Tue, Dec 21, 2021 at 9:17 PM Peter Robinson wrote:
>
> This moves over the PMIC power init to DM and the associated i2c and
> regulator bits.
>
> Signed-off-by: Peter Robinson
> ---
> board/udoo/neo/neo.c | 139 +++--
> configs/udoo_neo_defconf
This moves over the PMIC power init to DM and the associated i2c and
regulator bits.
Signed-off-by: Peter Robinson
---
board/udoo/neo/neo.c | 139 +++--
configs/udoo_neo_defconfig | 10 +--
include/configs/udoo_neo.h | 5 --
3 files changed, 15 insertions
---
drivers/usb/gadget/dwc2_udc_otg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/dwc2_udc_otg.c
b/drivers/usb/gadget/dwc2_udc_otg.c
index 2f31814442..b30604eba0 100644
--- a/drivers/usb/gadget/dwc2_udc_otg.c
+++ b/drivers/usb/gadget/dwc2_udc_otg.c
@@ -4
---
arch/arm/mach-keystone/ddr3.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-keystone/ddr3.c b/arch/arm/mach-keystone/ddr3.c
index 9ee3284156..53117c2695 100644
--- a/arch/arm/mach-keystone/ddr3.c
+++ b/arch/arm/mach-keystone/ddr3.c
@@ -344,7 +344,7 @@ void d
---
drivers/ddr/altera/sequencer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 8a016f0628..e402f2929a 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -2770,7 +2770,7 @@
---
common/fdt_support.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 8992ac5d3f..a7dbe0efdf 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -1407,7 +1407,7 @@ int fdt_get_dma_range(const void *blob, int node,
---
drivers/core/of_addr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/core/of_addr.c b/drivers/core/of_addr.c
index 3fbc0a7afa..431dd4e565 100644
--- a/drivers/core/of_addr.c
+++ b/drivers/core/of_addr.c
@@ -367,7 +367,7 @@ int of_get_dma_range(const struct device_
---
drivers/net/fec_mxc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 40a86a3e12..811bc275c1 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1465,7 +1465,7 @@ static int fecmxc_probe(struct udevice *dev)
---
cmd/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 5b30b13e43..bb11aec9b7 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1012,7 +1012,7 @@ config CMD_IDE
select IDE
help
Provides an 'ide' command which allow
---
arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
index 41c89b8904..60769e139e 100644
--- a/arch/arm/cpu/armv8/fsl
---
drivers/usb/musb/musb_udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c
index b9510e3045..2ffcb7caaa 100644
--- a/drivers/usb/musb/musb_udc.c
+++ b/drivers/usb/musb/musb_udc.c
@@ -269,7 +269,7 @@ static void musb
---
drivers/mtd/ubispl/ubispl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/ubispl/ubispl.c b/drivers/mtd/ubispl/ubispl.c
index 03b31f002b..b58d8e8d56 100644
--- a/drivers/mtd/ubispl/ubispl.c
+++ b/drivers/mtd/ubispl/ubispl.c
@@ -953,7 +953,7 @@ retry:
---
arch/arm/mach-bcm283x/msg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-bcm283x/msg.c b/arch/arm/mach-bcm283x/msg.c
index 01a8ed2a7b..fe243e2dca 100644
--- a/arch/arm/mach-bcm283x/msg.c
+++ b/arch/arm/mach-bcm283x/msg.c
@@ -194,7 +194,7 @@ int bcm2711_noti
Hi,
as far as i have debugged it:
soc-config is in CONFIG_EXTRA_ENV_SETTINGS
distroboot (include/config_distro_bootcmd.h) lands in BOOTENV
magic is in include/env_default.h where at least CONFIG_EXTRA_ENV_SETTINGS is
only mapped
if CONFIG_USE_DEFAULT_ENV_FILE is not set, if set a generated head
On Tue, 21 Dec 2021 10:00:14 -0700
Josh Datko wrote:
> Thanks everyone for including me — I don’t have any code comments but I will
> say that this i2c driver, with the exception of the i2c default address
> (which looks like is being set via the device tree anyway), should also work
> with th
On Tue, 21 Dec 2021 17:17:22 +0100
Adrian Fiergolski wrote:
> This patch replaces use fdtdec_get_addr with recommended
> fdtdec_get_addr_size_auto_parent.
And why is that required?
If at all, I would rather change it to simple dev_read_addr().
Marek
On Tue, 21 Dec 2021 17:17:21 +0100
Adrian Fiergolski wrote:
> Once request is sent, and before receiving a response, the delay is required.
> This patch fixes missing delay for before first response try.
>
> Signed-off-by: Adrian Fiergolski
Reviewed-by: Marek Behún
On Tue, 21 Dec 2021 17:17:20 +0100
Adrian Fiergolski wrote:
> If the maximum number of wake-up attempts is exceeded, return -ETIMEDOUT.
>
> Signed-off-by: Adrian Fiergolski
Reviewed-by: Marek Behún
Apple's ARMv8 cores don't implement EL3 and therefore don't
provide a PSCI implementation. So don't attempt to use
PSCI to reset on machines using Apple SoCs.
Signed-off-by: Mark Kettenis
---
arch/arm/cpu/armv8/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm
This patch replaces use fdtdec_get_addr with recommended
fdtdec_get_addr_size_auto_parent.
Signed-off-by: Adrian Fiergolski
---
drivers/misc/atsha204a-i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/atsha204a-i2c.c b/drivers/misc/atsha204a-i2c.c
index d264
Once request is sent, and before receiving a response, the delay is required.
This patch fixes missing delay for before first response try.
Signed-off-by: Adrian Fiergolski
---
drivers/misc/atsha204a-i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/atsha204a
If the maximum number of wake-up attempts is exceeded, return -ETIMEDOUT.
Signed-off-by: Adrian Fiergolski
---
drivers/misc/atsha204a-i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/atsha204a-i2c.c b/drivers/misc/atsha204a-i2c.c
index 715dabb279..9d069f
Series of patches fixing atsha204a driver. Partially inspired by Enclustra's
repo [1].
[1] https://github.com/enclustra-bsp/xilinx-uboot
Adrian Fiergolski (3):
misc: atsha204a: return timeout from wakeup function
misc: atsha204a: add delay after sending the message
misc: atsha204a: fix i2c
Despite the official specification, BootROM does not look at the lowest bit
of ext field but rather checks if ext field is non-zero.
Moreover original Marvell doimage tool puts into the mhdr->ext field the
number of extended headers, so basically it sets ext filed to non-zero
value if some extende
To regenerate kwbimage from existing image, it is needed to have kwbimage
config file. Add a new option to generate kwbimage config file from
existing kwbimage when '-p 1' option is given.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools/kwbimage.c | 175
When there is no -p argument for dumpimage tool specified, extract the main
data image from kwbimage file. This makes dumpimage consistent with other
image formats.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools/kwbimage.c | 67 +---
1 f
Do not check for kwbimage configuration file when just showing information
about existing kwbimage file.
The check for kwbimage configuration file is required only when creating
kwbimage, not when showing information about image or when extracting data
from image.
With this change, it is possible
Avoid casting const to non-const.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools/kwbimage.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/kwbimage.h b/tools/kwbimage.h
index 8d37357e5abd..c000cba4b8d1 100644
--- a/tools/kwbimage.h
+++ b/tools/kwbima
ARM executable code included in kwbimage binary header, which is not
position independent, needs to be loaded and executed by BootROM at the
correct fixed address.
Armada BootROMs load kwbimage header (in which the executable code is also
stored) at fixed address 0x4000, which seems to be mapp
For debugging purposes it is good to know where the binary image would be
loaded and also it is needed to know if printed size is image size or the
size of header together with image.
Make it unambiguous by showoing that printed size is not the size of the
whole header, but only the size of execut
U-Boot SPL for mvebu platform is not compiled as position independent.
Therefore it is required to instruct BootROM to load U-Boot SPL at the
correct address. Loading of kwbimage binary code at specific address can be
now achieved by the new LOAD_ADDRESS token as part of BINARY command in
kwbimage
BootROMs on pre-A38x SoCs enabled its output on UART by default, but A38x'
BootROM has its output on UART disabled by default.
To enable BootROM output on A38x SoC, it is required to set DEBUG flag
(which only enables BootROM output and nothing more) in kwbimage. For UART
images this DEBUG flag is
Data delay is stored as 8-bit number in kwbimage structure. Ensure the
given value is at most 255.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools/kwbimage.c | 4
1 file changed, 4 insertions(+)
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 7759a5f94098..4b3b40ce24fb
Function image_headersz_v1() may return zero on fatal errors.
In this case the function already printed an error message.
Check the return value of image_headersz_v1() in kwbimage_generate(),
and exit on zero value with EXIT_FAILURE.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools
Preserve the order of BINARY, DATA and DATA_DELAY commands as they appear
in the input file. They may depend on each other.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools/kwbimage.c | 58 +++-
1 file changed, 38 insertions(+), 20 deletio
Deduplicate code that finishes OPT_HDR_V1_REGISTER_TYPE header by
extracing it into separate function.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools/kwbimage.c | 41 ++---
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/tools/kw
Usage of $(call cmd,...) is standard way to call other commands which
generate things.
It also has the advantage of printing build information in the form
KWBCFG arch/arm/mach-mvebu/kwbimage.cfg
if verbosity is disabled, and printing the build command otherwise.
Note that the '#' character nee
Register set header consists of sequence of DATA commands followed by
exactly one DATA_DELAY command. Thus if we are generating image with
multiple DATA_DELAY commands, we need to create more register set headers.
Fix calculation of image size with multiple DATA_DELAY commands and
correctly set po
Mark all local functions as static.
Signed-off-by: Pali Rohár
Reviewed-by: Marek Behún
---
tools/kwbimage.c | 37 +++--
1 file changed, 19 insertions(+), 18 deletions(-)
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 875f636c7a4f..9f852923dc61 100644
---
This patch series fixes generating images in kwbimage format, main fix
is setting correct load address of U-Boot SPL. Also it adds support for
generating kwbimage config file from existing kwbimage file via
dumpimage tool.
Pali Rohár (16):
tools: kwbimage: Mark all local functions as static
to
On Mon, Dec 20, 2021 at 06:12:04PM +, Andre Przywara wrote:
> The Juno Arm development board is an open, vendor-neutral, Armv8-A
> development platform.
> Add documentation that briefly outlines the hardware, and describes
> building and installation of U-Boot.
>
Reviewed-by: Sudeep Holla
-
On Mon, Dec 20, 2021 at 06:12:03PM +, Andre Przywara wrote:
> From: Peter Hoyes
>
> Create a new documentation section for Arm Ltd boards with a sub-page
> for the FVP VExpress64 system.
>
Reviewed-by: Sudeep Holla
--
Regards,
Sudeep
On Tue, Dec 21, 2021 at 9:33 AM Peter Robinson wrote:
>
> Enable support for USB and USB storage on the UDOO Neo.
>
> Signed-off-by: Peter Robinson
Reviewed-by: Fabio Estevam
On Tue, Dec 21, 2021 at 9:32 AM Peter Robinson wrote:
>
> The ethernet has a RMII not RGMII, also needs DM_MDIO and finally
> initialise it later in the process as it's not needed that early on
> and not everything is ready so it locks up the device.
>
> Signed-off-by: Peter Robinson
Reviewed-by
On Tue, Dec 21, 2021 at 9:32 AM Peter Robinson wrote:
>
> This fixes booting from the mSD card from both SPL and when
> using it for the OS booting. It also cleans up a few mmc
> booting bits that are no longer needed.
>
> Signed-off-by: Peter Robinson
Reviewed-by: Fabio Estevam
On Tue, Dec 21, 2021 at 9:32 AM Peter Robinson wrote:
>
> Calling gpio_request() prior to its usage is now mandatory.
>
> This fixes the following GPIO errors:
> gpio@20a8000: set_dir_flags: error: gpio GPIO4_16 not reserved
> gpio@20a8000: set_dir_flags: error: gpio GPIO4_13 not reserved
> gpio@2
Hi,
currently i use distroboot on my board which sets some environment-variables,
some other (memory addresses) were set in my soc-specific header file
(include/configs/rk3568_common.h).
But distroboot is a bit too limited for my needs (no tftp, no script, ...), so
imho i need to use the bootm
On Tue, Dec 21, 2021 at 09:00:44AM +0100, Heinrich Schuchardt wrote:
> doc/usage/index.rst in branch origin/next includes usage/environment twice.
> Remove the duplicate entry.
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Description: PGP signa
On Tue, Dec 21, 2021 at 09:00:44AM +0100, Heinrich Schuchardt wrote:
> doc/usage/index.rst in branch origin/next includes usage/environment twice.
> Remove the duplicate entry.
>
> Signed-off-by: Heinrich Schuchardt
> ---
> Hello Tom,
>
> this seems to be merge error. We need this patch to buil
Hi Sean,
On Sat, 18 Dec 2021 at 08:16, Sean Anderson wrote:
>
> On 12/18/21 10:08 AM, Simon Glass wrote:
> > This converts the following to Kconfig:
> > CONFIG_TIMESTAMP
> >
> > Signed-off-by: Simon Glass
> > ---
>
> [...]
>
> > diff --git a/net/Kconfig b/net/Kconfig
> > index 3d3329912da..1
Enable support for USB and USB storage on the UDOO Neo.
Signed-off-by: Peter Robinson
---
configs/udoo_neo_defconfig | 7 +++
include/configs/udoo_neo.h | 1 +
2 files changed, 8 insertions(+)
diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig
index 2a37757100..ca08de1bd4
This fixes booting from the mSD card from both SPL and when
using it for the OS booting. It also cleans up a few mmc
booting bits that are no longer needed.
Signed-off-by: Peter Robinson
---
arch/arm/dts/imx6sx-udoo-neo-u-boot.dtsi | 7 -
board/udoo/neo/neo.c | 40 ++
The ethernet has a RMII not RGMII, also needs DM_MDIO and finally
initialise it later in the process as it's not needed that early on
and not everything is ready so it locks up the device.
Signed-off-by: Peter Robinson
---
board/udoo/neo/neo.c | 3 ++-
configs/udoo_neo_defconfig | 2 +-
2
Calling gpio_request() prior to its usage is now mandatory.
This fixes the following GPIO errors:
gpio@20a8000: set_dir_flags: error: gpio GPIO4_16 not reserved
gpio@20a8000: set_dir_flags: error: gpio GPIO4_13 not reserved
gpio@20a8000: set_dir_flags: error: gpio GPIO4_0 not reserved
gpio@20a8000
As explained in commit 3bedbcc3aa18 ("arm: mvebu: a38x: serdes: Don't
overwrite read-only SAR PCIe registers") it is required to set Maximum Link
Width bits of PCIe Root Port Link Capabilities Register depending of number
of used serdes lanes. As this register is part of PCIe address space and
not
Function mvebu_pcie_port_parse_dt() is called only from
mvebu_pcie_of_to_plat() function. Both these function parse DT properties
required to setup mvebu pcie. So inline mvebu_pcie_port_parse_dt() function
into mvebu_pcie_of_to_plat() to have all code related to parsing DT
properties at one place.
Enabling and disabling PCIe ports is done via address space of system
controller. All 32-bit Armada SoCs use low 4 bits in SoC Control 1 Register
for enabling and disabling some or more PCIe ports. Correct mapping needs
to be set in particular DTS files.
DT API for mvebu-reset is prepared for impl
In first phase just parse DT properties and fill struct mvebu_pcie. In
second phase setup all PCIe links (without enabling them). And in the last
third phase enable all PCIe links and create UCLASS_PCI device for each
one.
Because parsing of DT is done before UCLASS_PCI is created, we cannot use
D
After function mvebu_pcie_probe() returns U-Boot DM expects that PCIe link
is already up. In followup patches link initialization will be moved from
SPL to proper and therefore explicitly link up delay is required.
Delay mvebu_pcie_probe() for 100ms to ensure that PCIe link is up after
function fi
Do not call pci_set_region() for resources which were not properly mapped.
This prevents U-Boot to access unmapped memory space.
Update MBUS_PCI_MEM_SIZE and MBUS_PCI_IO_SIZE macros to cover all PCIe MEM
and IO ranges. Previously these macros covered only address ranges for the
first PCIe port. Be
SoC specific macro SOC_REGS_PHY_BASE is used for two things:
* calculation of base PCIe port address
* filling PCIe register with address of internal registers
For calculating base PCIe port address use function
ofnode_translate_address() which translates DT "assigned-addresses" to
final PCIe por
A385 controlcenterdc board does not use PCI DM properly and touches some
PCIe devices directly in its board code.
This controlcenterdc spl_board_init() function expects that PCIe link is
already initialized. Link itself is initialized in a38x serdes code but
this will change in future and link ini
The only user of board_pex_config() weak function is A385 controlcenterdc
board. It looks like that code in its board_pex_config() function needs to
be executed after PCIe link is up. Therefore put this code into
spl_board_init() function which is called after a38x serdes initialization,
and theref
This patch series removes gdsys's board_pex_config() function by
converting it to spl_board_init(), adds a new mvebu-reset driver for
enabling / disabling PCIe ports and finally moves PCIe code from serdes
driver to pci_mvebu.c driver.
After all these changes, PCIe link is not initialized in serde
On Tuesday 21 December 2021 09:19:12 Stefan Roese wrote:
> Hi Pali,
>
> On 12/20/21 14:30, Pali Rohár wrote:
> > On Saturday 18 December 2021 14:53:52 Stefan Roese wrote:
> > > Hi Pali,
> > >
> > > On 12/16/21 11:28, Pali Rohár wrote:
> > > > On Wednesday 15 December 2021 09:10:50 Stefan Roese wr
On Sat, Dec 18, 2021 at 9:10 PM Fabio Estevam wrote:
>
> CMD_DM is useful for showing the whole DM tree.
>
> Enable it via "imply CMD_DM".
>
> Signed-off-by: Fabio Estevam
Reviewed-by: Peter Robinson
> ---
> arch/arm/mach-imx/mx6/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/
On Sat, Dec 18, 2021 at 9:10 PM Fabio Estevam wrote:
>
> Increase CONFIG_ENV_OFFSET to avoid the environment region to
> overlap with U-Boot proper.
>
> Signed-off-by: Fabio Estevam
Reviewed-by: Peter Robinson
> ---
> configs/udoo_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-
On Sat, Dec 18, 2021 at 9:10 PM Fabio Estevam wrote:
>
> After the conversion to DM the SD card shows up as 'mmc 2'
> device.
>
> Adjust the 'mmcdev' and the distro command 'func' accordingly.
>
> Signed-off-by: Fabio Estevam
Reviewed-by: Peter Robinson
> ---
> configs/udoo_defconfig | 1 +
> i
> From: Jaehoon Chung
> Date: Tue, 21 Dec 2021 08:00:38 +0900
Hello Jaehoon,
> Dear Mark,
>
> On 12/7/21 4:03 AM, Mark Kettenis wrote:
> > This series adds support for the power management controller found on
> > Apple SoCs based on the device tree bindings submitted to upstream
> > Linux. Thi
Hi Tom,
please pull the following Marvell MVEBU related patches into next:
- pci_mvebu: Misc improvements and cleanup (Pali)
- turris_mox: Remove extra newline after module topology (Marek)
-
On 11/11/21 16:35, Marek Behún wrote:
From: Marek Behún
Remove extra newline after module topology is printed.
Signed-off-by: Marek Behún
Applied to u-boot-marvell/next
Thanks,
Stefan
---
board/CZ.NIC/turris_mox/turris_mox.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/board/
On 11/11/21 16:35, Marek Behún wrote:
From: Pali Rohár
The global data pointer is not used in this driver, remove it's
declaration.
Signed-off-by: Pali Rohár
Signed-off-by: Marek Behún
Applied to u-boot-marvell/next
Thanks,
Stefan
---
drivers/pci/pci_mvebu.c | 3 ---
1 file changed,
On 12/18/21 19:28, Simon Glass wrote:
Comment some functions that need more information.
Signed-off-by: Simon Glass
---
(no changes since v6)
Changes in v6:
- Fix comment style in setup_info_table()
lib/efi/efi_stub.c | 22 ++
1 file changed, 22 insertions(+)
diff --g
On 11/11/21 16:35, Marek Behún wrote:
From: Pali Rohár
Use more appropriate resource_size() function when working with data in
struct resource.
Signed-off-by: Pali Rohár
Signed-off-by: Marek Behún
Applied to u-boot-marvell/next
Thanks,
Stefan
---
drivers/pci/pci_mvebu.c | 12 ++---
On 11/11/21 16:35, Marek Behún wrote:
From: Pali Rohár
Function mvebu_pcie_setup_wins() sets up all other BARs, so move setup of
BAR[0] to this function to have common code at one place.
In the past, commit 193a1e9f196b ("pci: pci_mvebu: set BAR0 after memory
space is set") moved setup of BAR[
On 12/18/21 19:28, Simon Glass wrote:
This should return false when the EFI app is running, since UEFI has done
the required low-level init. Fix it.
Signed-off-by: Simon Glass
---
(no changes since v1)
include/init.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/inclu
Hi Pali,
On 12/20/21 14:30, Pali Rohár wrote:
On Saturday 18 December 2021 14:53:52 Stefan Roese wrote:
Hi Pali,
On 12/16/21 11:28, Pali Rohár wrote:
On Wednesday 15 December 2021 09:10:50 Stefan Roese wrote:
Hi Pali,
On 12/13/21 11:27, Pali Rohár wrote:
On Monday 13 December 2021 08:41:30
Add missing colon.
Signed-off-by: Heinrich Schuchardt
---
include/efi.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/efi.h b/include/efi.h
index 0ec5913ddd..1432038838 100644
--- a/include/efi.h
+++ b/include/efi.h
@@ -321,7 +321,7 @@ struct efi_info_hdr {
* stru
doc/usage/index.rst in branch origin/next includes usage/environment twice.
Remove the duplicate entry.
Signed-off-by: Heinrich Schuchardt
---
Hello Tom,
this seems to be merge error. We need this patch to build 'make htmldocs'.
Please, apply to origin/next without further pull request.
Best re
84 matches
Mail list logo