On 07/11/2023 08.30, Rasmus Villemoes wrote:
> I'll send a revert to Tom for the prematurely applied fixup.
Oh, I see that's already done. Good.
Rasmus
On 07/11/2023 01.46, Sean Anderson wrote:
> On 10/13/23 14:30, Rasmus Villemoes wrote:
>> On 12/10/2023 04.17, Sean Anderson wrote:
>>
>>> I was hoping you would respond to my most-recent email regarding this
>>> series.
>>> In particular:
>>>
>>> | Why does mkimage have to do this? Can't you just
пн, 6 лист. 2023 р. о 14:00 Peter Robinson пише:
>
> On Mon, Nov 6, 2023 at 10:18 AM Svyatoslav Ryhel wrote:
> >
> > This patchset adds support for gpio-uclass to work with pmic gpio childrens
> > properly and implements MAX77663 and PALMAS GPIO cells/children as a
> > reference and to be
Hi Nishanth,
On 04/11/23 12:51, Nishanth Menon wrote:
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmd and instead depend entirely on bootflow method of
starting the system up.
Signed-off-by: Nishanth Menon
---
configs/j7200_evm_a72_defconfig | 5 +++--
1
Hi Nishanth,
On 04/11/23 12:51, Nishanth Menon wrote:
Kernel commit 1b77265626a4 ("arm64: dts: ti: k3-j7200-mcu-wakeup: Add
HyperBus node") was merged to kernel without its dependent patch [1].
Similar fix is needed in U-Boot, and hbmc currently breaks boot. Till
this gets fixed in U-Boot,
Hi Nishanth
On 04/11/23 12:51, Nishanth Menon wrote:
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmd and instead depend entirely on bootflow method of
starting the system up.
Signed-off-by: Nishanth Menon
---
configs/j721e_evm_a72_defconfig | 5 +++--
1
Hi Nishanth,
On 04/11/23 12:51, Nishanth Menon wrote:
Add explicit boot_targets to indicate the specific boot sequence to
follow.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/j721e.env | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/ti/j721e/j721e.env
Hi Nishanth,
On 04/11/23 12:51, Nishanth Menon wrote:
Switch to using IS_ENABLED() for inline function usage.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 83 ++--
1 file changed, 42 insertions(+), 41 deletions(-)
diff --git
Hi Nishanth,
On 04/11/23 12:51, Nishanth Menon wrote:
When config is enabled, the esm dt probe makes sense. Simplify by
dropping board specific checks.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 10 ++
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git
Hi Nishanth,
On 04/11/23 12:51, Nishanth Menon wrote:
Drop headers that are no longer necessary for build
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 8
1 file changed, 8 deletions(-)
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index
> -Original Message-
> From: U-Boot On Behalf Of Jaehoon Chung
> Sent: Tuesday, November 7, 2023 3:42 PM
> To: 'Bhargav Raviprakash' ; u-boot@lists.denx.de
> Subject: RE: [PATCH v2 1/2] driver: power: add support for TPS65224
>
> Hi Bhargav,
>
> > -Original Message-
> > From:
Hi Bhargav,
> -Original Message-
> From: Bhargav Raviprakash
> Sent: Monday, November 6, 2023 11:07 PM
> To: u-boot@lists.denx.de
> Cc: jh80.ch...@samsung.com; Bhargav Raviprakash
> Subject: [PATCH v2 1/2] driver: power: add support for TPS65224
>
> Added support for PMIC TPS65224.
Hi Jaehoon,
On 11/1/23 08:20, Jaehoon Chung wrote:
> From: Jaehoon Chung
> Hi
>
> On 10/3/23 16:22, Kuan Lim Lee wrote:
> > From: Kuan Lim Lee
> >
> > Cadence SDMMC v6 controller has a lot of changes on initialize
> > compared to v4 controller. PHY is needed by v6 controller.
> >
> >
Hi Andrew,
On 06/11/23 22:34, Andrew Davis wrote:
On 11/4/23 3:11 AM, Nishanth Menon wrote:
Add base support for BeagleBone AI-64 board support.
Further information at https://beagleboard.org/ai-64
Signed-off-by: Nishanth Menon
---
arch/arm/mach-k3/Kconfig | 1 +
On 11:11-20231106, Andrew Davis wrote:
> On 11/3/23 9:45 PM, Nishanth Menon wrote:
> > This file is used to emulate customer keys on TI development board
> > ecosystems, move it out of board/ directory and into mach-k3. And
> > change the relative paths to absolute path
On Mon, 6 Nov 2023 at 20:59, Caleb Connolly wrote:
>
> The pinctrl and GPIO drivers are currently heavily incompatible with
> upstream. Most Qualcomm pinctrl blocks feature "tiles" of pins, each at
> it's own address. Introduce support for these by allowing the soc driver
> to specify per-pin
On 2023/10/28 02:35, Johan Jonker wrote:
Keep track of the re-entries with help of the lr register.
This binary can be re-used and called from various BROM functions.
Only when it's called from the part that handles SPI, NAND or EMMC
hardware it needs to early return to BROM ones.
In download
On 2023/10/30 21:12, Tim Lunn wrote:
RV1126 fails to boot on 2024.01-rc1.
Commit 9e64428 changed the behaviour of bootph-pre-ram, to limit
nodes to spl phase. This caused rv1126 boards to fail to boot
with the current dts.
This patch updates the pmu/grf nodes to bootph-all tags as they are
On 2023/10/31 10:07, Tim Lunn wrote:
Provide configuration to read cpuid and generate a persistant
MAC address in ethaddr
Signed-off-by: Tim Lunn
Reviewed-by: Kever Yang
Thanks,
- Kever
---
arch/arm/dts/rv1126-u-boot.dtsi | 12
arch/arm/mach-rockchip/Kconfig | 2 ++
2
On 2023/10/31 10:07, Tim Lunn wrote:
Extend the otp driver to read rv1126 otp. This driver code was
adapted from the Rockchip BSP stack.
Signed-off-by: Tim Lunn
Reviewed-by: Kever Yang
Thanks,
- Kever
---
drivers/misc/rockchip-otp.c | 76 +
1 file
On 2023/11/3 17:28, Quentin Schulz wrote:
From: Quentin Schulz
Now that Ringneck requires some board-specific code (namely resetting
the MCU companion controller) to be run during SPL stage, let's enable
SPL_BOARD_INIT.
Cc: Quentin Schulz
Reviewed-by: Heiko Stuebner
Signed-off-by: Quentin
On 2023/11/3 17:28, Quentin Schulz wrote:
From: Quentin Schulz
It's happened that glitches on the STM32_RST and STM32_BOOT lines have
put the STM32 companion microcontroller into DFU mode making it not boot
its FW, rendering it useless for the user.
Considering that the STM32 companion
Hi Tom,
On Mon, 6 Nov 2023 at 13:46, Tom Rini wrote:
>
> On Mon, Nov 06, 2023 at 01:38:39PM -0700, Simon Glass wrote:
> > Hi Andre,
> >
> > On Mon, 6 Nov 2023 at 10:26, Andre Przywara wrote:
> > >
> > > On Sat, 4 Nov 2023 19:45:06 +
> > > Simon Glass wrote:
> > >
> > > Hi,
> > >
> > > > On
Hi Tony,
On Mon, 6 Nov 2023 at 23:41, Tony Dinh wrote:
>
> Hi Simon,
>
> On Mon, Nov 6, 2023 at 12:51 PM Tony Dinh wrote:
> >
> > On Mon, Nov 6, 2023 at 11:51 AM Tom Rini wrote:
> > >
> > > On Mon, Nov 06, 2023 at 11:42:51AM -0800, Tony Dinh wrote:
> > > > Hi Simon,
> > > >
> > > > On Mon, Nov
Hi Tom,
On Mon, 6 Nov 2023 at 13:15, Tom Rini wrote:
>
> On Mon, Nov 06, 2023 at 12:58:46PM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> >
> > On Mon, 6 Nov 2023 at 11:30, Tom Rini wrote:
> > >
> > > On Mon, Nov 06, 2023 at 10:25:00AM -0700, Simon Glass wrote:
> > > > Hi Tom,
> > > >
> > > > On
Hi Andre,
On Mon, 6 Nov 2023 at 21:55, Andre Przywara wrote:
>
> On Mon, 6 Nov 2023 13:38:39 -0700
> Simon Glass wrote:
>
> Hi Simon,
>
> > On Mon, 6 Nov 2023 at 10:26, Andre Przywara wrote:
> > >
> > > On Sat, 4 Nov 2023 19:45:06 +
> > > Simon Glass wrote:
> > >
> > > Hi,
> > >
> > > >
On 10/13/23 14:30, Rasmus Villemoes wrote:
On 12/10/2023 04.17, Sean Anderson wrote:
I was hoping you would respond to my most-recent email regarding this
series.
In particular:
| Why does mkimage have to do this? Can't you just use truncate or, in a
| binman context, align-size?
In both
Exit the UMS handler loop in case START-STOP UNIT SCSI command is
received. This is sent e.g. by the util-linux eject(1) command and
indicates to the device that it is supposed to spin down the media
and enter low power state.
This effectively adds support for exitting the 'ums' command from
host
A power domain id on sandbox should be in the range from zero to
ARRAY_SIZE(scmi_pwdom) - 1. Correct the validity check logic.
Signed-off-by: AKASHI Takahiro
Fixes: CID 467401
Fixes: CID 467405
---
drivers/firmware/scmi/sandbox-scmi_agent.c | 8
1 file changed, 4 insertions(+), 4
Hi Simon,
On Mon, Nov 6, 2023 at 12:51 PM Tony Dinh wrote:
>
> On Mon, Nov 6, 2023 at 11:51 AM Tom Rini wrote:
> >
> > On Mon, Nov 06, 2023 at 11:42:51AM -0800, Tony Dinh wrote:
> > > Hi Simon,
> > >
> > > On Mon, Nov 6, 2023 at 9:25 AM Simon Glass wrote:
> > > >
> > > > Hi Tony,
> > > >
> > >
On Mon, 6 Nov 2023 13:38:39 -0700
Simon Glass wrote:
Hi Simon,
> On Mon, 6 Nov 2023 at 10:26, Andre Przywara wrote:
> >
> > On Sat, 4 Nov 2023 19:45:06 +
> > Simon Glass wrote:
> >
> > Hi,
> >
> > > On Sat, 4 Nov 2023 at 17:13, Andre Przywara
> > > wrote:
> > > >
> > > > On Fri, 3
On 11/6/23 21:42, Simon Glass wrote:
+Marek Vasut
+Vagrant Cascadian
On Mon, 6 Nov 2023 at 10:33, John Paul Adrian Glaubitz <
glaub...@physik.fu-berlin.de> wrote:
Hi Simon!
On Mon, 2023-11-06 at 10:24 -0700, Simon Glass wrote:
So, I assume, I should just be able to write u-boot.bin to
On Mon, Nov 06, 2023 at 02:11:16PM +, Peter Robinson wrote:
> On Mon, Nov 6, 2023 at 1:28 PM Svyatoslav Ryhel wrote:
> >
> > пн, 6 лист. 2023 р. о 15:13 Peter Robinson пише:
> > >
> > > On Mon, Nov 6, 2023 at 11:58 AM Svyatoslav Ryhel
> > > wrote:
> > > >
> > > > пн, 6 лист. 2023 р. о
Linux DTs stuff a value indicating if the USID is a USID or a GSID in the
reg property, the Linux SPMI driver then reads the two address cells
separately. U-boot's dev_read_addr() doesn't know how to handle this, so
use ofnode_read_u32_index() to get just the USID.
The Qcom pmic driver doesn't
The core and chnl register ranges were swapped on SDM845. Fix it, and
fetch the register ranges by name instead of by index.
Drop the cosmetic "version" variable and clean up the debug logging.
Signed-off-by: Caleb Connolly
---
arch/arm/dts/sdm845.dtsi | 2 +-
drivers/spmi/spmi-msm.c | 46
Linux devicetrees use the "gpio-ranges" property, add support for
parsing it instead of "gpio-count" so that upstream DTs can be used with
U-Boot.
Signed-off-by: Caleb Connolly
---
drivers/gpio/qcom_pmic_gpio.c | 26 ++
1 file changed, 26 insertions(+)
diff --git
The power and resin keys were implemented as GPIOs here, but their only
use would be as buttons. Avoid the additional layer of introspection and
rework this driver into a button driver.
While we're here, replace the "qcom,pm8998-pwrkey" compatible with
"qcom,pm8941-pwrkey" to match upstream
priv->pid is uint32_t, but dev_read_addr() returns a uint64_t on arm64,
with the upper bits being used for error codes. Do error checking before
downcasting to u32 to prevent errors being silently ignored.
Signed-off-by: Caleb Connolly
---
drivers/gpio/qcom_pmic_gpio.c | 14 ++
1
(the db410c and 820c) are adjusted to use the new button
driver in their board init code.
This series is based on the pinctrl [1] and clock [2] cleanup series.
There may be some DTS conflicts applying it standalone.
[1]:
https://lore.kernel.org/u-boot/20231106-b4-qcom-pinctrl-v2-0-406e8d868...@linaro.org
On Mon, Nov 6, 2023 at 11:51 AM Tom Rini wrote:
>
> On Mon, Nov 06, 2023 at 11:42:51AM -0800, Tony Dinh wrote:
> > Hi Simon,
> >
> > On Mon, Nov 6, 2023 at 9:25 AM Simon Glass wrote:
> > >
> > > Hi Tony,
> > >
> > > On Wed, 4 Oct 2023 at 21:23, Tony Dinh wrote:
> > > >
> > > > Hi Simon,
> > > >
On Mon, Nov 06, 2023 at 01:38:39PM -0700, Simon Glass wrote:
> Hi Andre,
>
> On Mon, 6 Nov 2023 at 10:26, Andre Przywara wrote:
> >
> > On Sat, 4 Nov 2023 19:45:06 +
> > Simon Glass wrote:
> >
> > Hi,
> >
> > > On Sat, 4 Nov 2023 at 17:13, Andre Przywara
> > > wrote:
> > > >
> > > > On
+Marek Vasut
+Vagrant Cascadian
On Mon, 6 Nov 2023 at 10:33, John Paul Adrian Glaubitz <
glaub...@physik.fu-berlin.de> wrote:
> Hi Simon!
>
> On Mon, 2023-11-06 at 10:24 -0700, Simon Glass wrote:
> > > So, I assume, I should just be able to write u-boot.bin to
> /dev/mtdblock0?
> >
> > Maybe,
Hi Andre,
On Mon, 6 Nov 2023 at 10:26, Andre Przywara wrote:
>
> On Sat, 4 Nov 2023 19:45:06 +
> Simon Glass wrote:
>
> Hi,
>
> > On Sat, 4 Nov 2023 at 17:13, Andre Przywara wrote:
> > >
> > > On Fri, 3 Nov 2023 13:38:58 -0600
> > > Simon Glass wrote:
> > >
> > > Hi Simon,
> > >
> > > >
Hey all,
Here's the latest report. I _think_ I passed the right options to
get_maintainer.pl such that it would only look far enough back in git to
find the likely authors (along with listed maintainers of the files).
-- Forwarded message -
From:
Date: Mon, Nov 6, 2023 at 2:58
On Mon, Nov 06, 2023 at 12:58:46PM -0700, Simon Glass wrote:
> Hi Tom,
>
>
> On Mon, 6 Nov 2023 at 11:30, Tom Rini wrote:
> >
> > On Mon, Nov 06, 2023 at 10:25:00AM -0700, Simon Glass wrote:
> > > Hi Tom,
> > >
> > > On Sun, 5 Nov 2023 at 14:19, Tom Rini wrote:
> > > >
> > > > On Sun, Nov 05,
On Mon, Nov 06, 2023 at 05:26:01PM +, Andre Przywara wrote:
> On Sat, 4 Nov 2023 19:45:06 +
> Simon Glass wrote:
>
> Hi,
>
> > On Sat, 4 Nov 2023 at 17:13, Andre Przywara wrote:
> > >
> > > On Fri, 3 Nov 2023 13:38:58 -0600
> > > Simon Glass wrote:
> > >
> > > Hi Simon,
> > >
> > >
On Sun, Nov 05, 2023 at 11:42:45PM +0100, Marek Vasut wrote:
> Currently the renesas_sdhi_reset_tuning() unconditionally leaves SDHI
> clock enabled after the tuning reset. This is not always necessary.
>
> After the driver performed tuning reset at the end of probe function,
> or in the unlikely
Hi Tom,
On Mon, 6 Nov 2023 at 11:30, Tom Rini wrote:
>
> On Mon, Nov 06, 2023 at 10:25:00AM -0700, Simon Glass wrote:
> > Hi Tom,
> >
> > On Sun, 5 Nov 2023 at 14:19, Tom Rini wrote:
> > >
> > > On Sun, Nov 05, 2023 at 01:03:51PM -0700, Simon Glass wrote:
> > >
> > > > This image type is
On Mon, Nov 06, 2023 at 11:42:51AM -0800, Tony Dinh wrote:
> Hi Simon,
>
> On Mon, Nov 6, 2023 at 9:25 AM Simon Glass wrote:
> >
> > Hi Tony,
> >
> > On Wed, 4 Oct 2023 at 21:23, Tony Dinh wrote:
> > >
> > > Hi Simon,
> > >
> > > On Mon, Oct 2, 2023 at 12:25 PM Tony Dinh wrote:
> > > >
> > > >
Hey all,
It's release day and here is -rc2. Looking at my own queue I think I've
got everything out that's not for -next, but there might be a few fixes
I've overlooked and will give things a harder read once I've merged
other things in to -next and the page is just more readable to me.
Speaking
Hi Simon,
On Mon, Nov 6, 2023 at 9:25 AM Simon Glass wrote:
>
> Hi Tony,
>
> On Wed, 4 Oct 2023 at 21:23, Tony Dinh wrote:
> >
> > Hi Simon,
> >
> > On Mon, Oct 2, 2023 at 12:25 PM Tony Dinh wrote:
> > >
> > > Hi Simon,
> > >
> > > On Sun, Oct 1, 2023 at 6:22 PM Simon Glass wrote:
> > > >
> >
On Mon, Nov 06, 2023 at 10:25:00AM -0700, Simon Glass wrote:
> Hi Tom,
>
> On Sun, 5 Nov 2023 at 14:19, Tom Rini wrote:
> >
> > On Sun, Nov 05, 2023 at 01:03:51PM -0700, Simon Glass wrote:
> >
> > > This image type is supposed to ignore the load address. But at present
> > > it fails if the load
Remove inclusion of common.h and add relevant
includes when necessary.
Signed-off-by: Christophe Leroy
---
arch/powerpc/cpu/mpc8xx/cache.c | 1 -
arch/powerpc/cpu/mpc8xx/cpu.c| 1 -
arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 -
arch/powerpc/cpu/mpc8xx/fdt.c| 1 -
Remove inclusion of common.h and add relevant
includes when necessary.
Signed-off-by: Christophe Leroy
---
board/cssi/cmpc885/cmpc885.c | 1 -
board/cssi/cmpc885/nand.c| 1 -
board/cssi/cmpc885/sdram.c | 3 ++-
board/cssi/cmpcpro/cmpcpro.c | 1 -
board/cssi/mcr3000/mcr3000.c | 1 -
Hi Martin,
On 2023-11-04 14:04, Martin Roukala (né Peres) wrote:
> When u-boot chainloads an EFI bootloader such as iPXE, we want to have
> already initialized the PCI subsystem so that network driver is loaded
> and ready to use by the bootloader.
This change slows down boot from emmc/sd-card
On 11/6/23 11:47 AM, Simon Glass wrote:
Hi Andrew,
On Mon, 6 Nov 2023 at 10:27, Andrew Davis wrote:
On 11/6/23 9:31 AM, Tom Rini wrote:
On Mon, Nov 06, 2023 at 11:23:51AM +0530, Manorit Chawdhry wrote:
Hi Simon,
On 11:22-20231005, Simon Glass wrote:
Hi Nishanth,
On Thu, 5 Oct 2023 at
Hi Andrew,
On Mon, 6 Nov 2023 at 10:27, Andrew Davis wrote:
>
> On 11/6/23 9:31 AM, Tom Rini wrote:
> > On Mon, Nov 06, 2023 at 11:23:51AM +0530, Manorit Chawdhry wrote:
> >> Hi Simon,
> >>
> >> On 11:22-20231005, Simon Glass wrote:
> >>> Hi Nishanth,
> >>>
> >>> On Thu, 5 Oct 2023 at 11:16,
On Mon, 6 Nov 2023 11:46:27 -0500
Tom Rini wrote:
Hi Tom,
> On Sat, Nov 04, 2023 at 05:12:12PM +, Andre Przywara wrote:
> > On Fri, 3 Nov 2023 13:38:58 -0600
> > Simon Glass wrote:
> >
> > Hi Simon,
> >
> > > Hi Heinrich,
> > >
> > > On Wed, 1 Nov 2023 at 14:20, Heinrich Schuchardt
>
Hi Simon!
On Mon, 2023-11-06 at 10:24 -0700, Simon Glass wrote:
> > So, I assume, I should just be able to write u-boot.bin to /dev/mtdblock0?
>
> Maybe, but you will likely brick the device if you have no other way
> to write to flash.
The flash memory is actually on a daughter board that can
On 11/6/23 9:31 AM, Tom Rini wrote:
On Mon, Nov 06, 2023 at 11:23:51AM +0530, Manorit Chawdhry wrote:
Hi Simon,
On 11:22-20231005, Simon Glass wrote:
Hi Nishanth,
On Thu, 5 Oct 2023 at 11:16, Nishanth Menon wrote:
On 12:10-20231005, Nishanth Menon wrote:
On 12:36-20231005, Tom Rini
On Sat, 4 Nov 2023 19:45:06 +
Simon Glass wrote:
Hi,
> On Sat, 4 Nov 2023 at 17:13, Andre Przywara wrote:
> >
> > On Fri, 3 Nov 2023 13:38:58 -0600
> > Simon Glass wrote:
> >
> > Hi Simon,
> >
> > > Hi Heinrich,
> > >
> > > On Wed, 1 Nov 2023 at 14:20, Heinrich Schuchardt
> > > wrote:
On Thu, 2 Nov 2023 at 12:51, Tony Dinh wrote:
>
> During bootstd scanning for bootdevs, if bootdev_hunt_drv() encounters
> a device not found error (e.g. ENOENT), let it return a successful status
> so that bootstd will continue scanning the next devices, not stopping
> prematurely.
>
>
Hi Bhargav,
On Mon, 6 Nov 2023 at 10:11, Bhargav Raviprakash wrote:
>
> Added support for PMIC TPS65224. Includes driver for pmic,
> and disabling Watchdog.
>
> Signed-off-by: Bhargav Raviprakash
> ---
> drivers/power/pmic/Kconfig| 6 ++
> drivers/power/pmic/Makefile | 1 +
>
Hi Tony,
On Wed, 4 Oct 2023 at 21:23, Tony Dinh wrote:
>
> Hi Simon,
>
> On Mon, Oct 2, 2023 at 12:25 PM Tony Dinh wrote:
> >
> > Hi Simon,
> >
> > On Sun, Oct 1, 2023 at 6:22 PM Simon Glass wrote:
> > >
> > > Hi Tony,
> > >
> > > On Tue, 26 Sept 2023 at 13:40, Tony Dinh wrote:
> > > >
> > >
Hi Tom,
On Sun, 5 Nov 2023 at 14:20, Tom Rini wrote:
>
> On Sun, Nov 05, 2023 at 01:03:52PM -0700, Simon Glass wrote:
>
> > If the image is compressed, then the existing check fails, since the
> > header is wrong.
> >
> > Move the check later in the boot process, after the kernel is
> >
Hi Tom,
On Mon, 6 Nov 2023 at 09:46, Tom Rini wrote:
>
> On Sat, Nov 04, 2023 at 05:12:12PM +, Andre Przywara wrote:
> > On Fri, 3 Nov 2023 13:38:58 -0600
> > Simon Glass wrote:
> >
> > Hi Simon,
> >
> > > Hi Heinrich,
> > >
> > > On Wed, 1 Nov 2023 at 14:20, Heinrich Schuchardt
> > >
Hi Heinrich,
On Sun, 5 Nov 2023 at 14:54, Heinrich Schuchardt
wrote:
>
> On 11/5/23 18:25, Simon Glass wrote:
> > Hi Heinrich,
> >
> > On Sun, 5 Nov 2023 at 03:47, Heinrich Schuchardt
> > wrote:
> >>
> >> On 11/4/23 21:42, Simon Glass wrote:
> >>> Hi Heinrich,
> >>>
> >>> On Sat, 4 Nov 2023 at
Hi Tom,
On Sun, 5 Nov 2023 at 14:19, Tom Rini wrote:
>
> On Sun, Nov 05, 2023 at 01:03:51PM -0700, Simon Glass wrote:
>
> > This image type is supposed to ignore the load address. But at present
> > it fails if the load address is missing. If it is zero, the image is
> > loaded at address 0,
Hi John,
On Mon, 6 Nov 2023 at 15:00, John Paul Adrian Glaubitz
wrote:
>
> Hi Simon,
>
> On Sun, 2023-11-05 at 16:29 +, Simon Glass wrote:
> > No, sorry I don't have any idea about that. You could check the
> > MAINTAINERS files in U-Boot and Linux for other people, perhaps, or
> > check
On 11/3/23 9:45 PM, Nishanth Menon wrote:
This file is used to emulate customer keys on TI development board
ecosystems, move it out of board/ directory and into mach-k3. And
change the relative paths to absolute paths in the binman paths.
While at it, drop the reference in verdin-binman file
From: Linus Walleij
Squashfs wasn't compiling because the lldiv() directives
turn into __udivdi3 and we are using private libgcc.
After this squashfs compiles for MIPS.
Signed-off-by: Linus Walleij
Signed-off-by: Daniel Schwierzeck
---
Linus, this is the updated and optimized version of
From: Daniel Schwierzeck
The intention of change_k0_cca() is to read the C0.Config register into
register $t0, update $t0 with the new cache coherency mode passed in $a0
and write back $t0 to C0.Config. With MIPS32 R2 or later instruction
sets, this can be achieved with a single instruction with
On 11/4/23 3:11 AM, Nishanth Menon wrote:
Add base support for BeagleBone AI-64 board support.
Further information at https://beagleboard.org/ai-64
Signed-off-by: Nishanth Menon
---
arch/arm/mach-k3/Kconfig |1 +
board/beagle/beagleboneai64/Kconfig |
Added support for PMIC TPS65224 regulators. Includes driver for
buck and ldo.
Signed-off-by: Bhargav Raviprakash
---
drivers/power/regulator/Kconfig | 10 +
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/tps65224_regulator.c | 495 +++
Added support for PMIC TPS65224. Includes driver for pmic,
and disabling Watchdog.
Signed-off-by: Bhargav Raviprakash
---
drivers/power/pmic/Kconfig| 6 ++
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/tps65224.c | 141 ++
TPS65224 is a Power Management IC which provides regulators and others
features like GPIOs, RTC, watchdog, ADC, ESMs (Error Signal Monitor),
and PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC
can communicate through the I2C.
Add support for TPS65224 PMIC in U-boot. This
On 11/3/23 9:45 PM, Nishanth Menon wrote:
This file is common for all of K3, move it out of board/ directory and
into mach-k3. And change the relative paths to absolute paths in the
binman paths.
While at it, drop the reference in verdin-binman file which is
redundant.
Signed-off-by: Nishanth
Remove unused devicetree, can be re-added later, in case
some board would use it.
Signed-off-by: Angelo Dureghello
---
arch/m68k/dts/mcf54xx.dtsi | 72 --
1 file changed, 72 deletions(-)
delete mode 100644 arch/m68k/dts/mcf54xx.dtsi
diff --git
On 11/4/23 2:21 AM, Nishanth Menon wrote:
Refactor J721E J7200 definition to make this independent of board
macros.
Signed-off-by: Nishanth Menon
---
arch/arm/mach-k3/arm64-mmu.c | 50 ++--
1 file changed, 25 insertions(+), 25 deletions(-)
diff --git
The intention of change_k0_cca() is to read the C0.Config register into
register $t0, update $t0 with the new cache coherency mode passed in $a0
and write back $t0 to C0.Config. With MIPS32 R2 or later instruction
sets, this can be achieved with a single instruction with INS. The
source and
NR_MMU_REGIONS is a copy/paste from another platform that extends
this list later. We do not do that, so let the list be the size
of the initializer list.
Signed-off-by: Andrew Davis
---
arch/arm/mach-k3/arm64-mmu.c | 34 ++
1 file changed, 6 insertions(+), 28
From: Linus Walleij
Squashfs wasn't compiling because the lldiv() directives
turn into __udivdi3 and we are using private libgcc.
After this squashfs compiles for MIPS.
Signed-off-by: Linus Walleij
Signed-off-by: Daniel Schwierzeck
---
Linus, this is the updated and optimized version of
Hi Tom,
sure, i remove the unused dtsi,
patch will follow.
Regards,
angelo
On 06/11/23 5:32 PM, Tom Rini wrote:
On Sat, Nov 04, 2023 at 09:58:07PM +0100, Angelo Dureghello wrote:
Hi Tom,
Reviewed by: Angelo Dureghello
Thanks for the cleanup, m68k boards build fine.
fsl_mcdmafec driver
On 10:45-20231106, Andrew Davis wrote:
> On 11/4/23 2:21 AM, Nishanth Menon wrote:
> > J7200 shares quite a few characteristics with J721E. However a few sets
> > are different. Introduce a Kconfig to differentiate the two to allow for
> > new boards to be introduced
On Sat, Nov 04, 2023 at 05:12:12PM +, Andre Przywara wrote:
> On Fri, 3 Nov 2023 13:38:58 -0600
> Simon Glass wrote:
>
> Hi Simon,
>
> > Hi Heinrich,
> >
> > On Wed, 1 Nov 2023 at 14:20, Heinrich Schuchardt
> > wrote:
> > >
> > > On 11/1/23 19:05, Andre Przywara wrote:
> > > > On Tue,
On 11/4/23 2:21 AM, Nishanth Menon wrote:
J7200 shares quite a few characteristics with J721E. However a few sets
are different. Introduce a Kconfig to differentiate the two to allow for
new boards to be introduced in a seamless manner.
Signed-off-by: Nishanth Menon
---
;
> are available in the Git repository at:
>
> https://source.denx.de/u-boot/custodians/u-boot-amlogic.git
> tags/u-boot-amlogic-20231106
>
> for you to fetch changes up to c550e81171940932664a85bda315a6a073aae23c:
>
> ARM: configs: libretech-ac: enable USB_DFU like in meson6
On Wed, Oct 25, 2023 at 11:08:44AM +0300, Baruch Siach wrote:
> Older DesignWare Ethernet MAC versions that this driver supports can
> only work with 32-bit DMA source/destination addresses. Some platforms
> have no physical RAM at the lowest 4GB address space. For these
> platforms the driver
On Wed, Oct 11, 2023 at 06:58:25PM +0800, Bin Meng wrote:
> e1000_eth_ids holds compatible strings for e1000 devices, but it
> is meaningless as e1000 is a PCI device and there is no such
> compatible string assigned to e1000 by the DT bindings community.
>
> Drop it.
>
> Signed-off-by: Bin
On Sat, Oct 07, 2023 at 09:53:12PM -0400, Sean Anderson wrote:
> Add an option to trace all packets send/received. This can be helpful when
> debugging protocol issues, as the packets can then be imported into
> wireshark [1] and analyzed further.
>
> [1]
On Fri, Oct 06, 2023 at 02:24:39PM +0200, Frank de Brabander wrote:
> Setting the clock delay from the device tree settings
> rx-internal-delay-ps and tx-internal-delay-ps was broken:
>
> - The expected value in the device tree is suppose to be a
>delay in picoseconds, but the driver only
From: Fabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
From: Fabio Estevam
The aliases and chosen nodes are currently indented using spaces.
Fix them to use the standard tab indentation.
Signed-off-by: Fabio Estevam
---
arch/arm/dts/imx7s-warp-u-boot.dtsi | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git
On Fri, Sep 15, 2023 at 04:10:06PM +0200, Michal Simek wrote:
> There is no reason to setup ROM source if read_rom_hwaddr hook doesn't
> exist or reading mac address fails. It is ending up with confusion about
> mac address source.
>
> It is nicely visible if you put mac address to DT as
>
On Wed, Aug 23, 2023 at 01:03:43AM +0800, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen
>
> It adds the driver for the internal MDIO bus of HIFEMAC Ethernet
> controller. It's based on the mainstream linux driver.
>
> Signed-off-by: Yang Xiwen
Applied to u-boot/master, thanks!
--
Tom
On Wed, Aug 23, 2023 at 01:03:42AM +0800, Yang Xiwen via B4 Relay wrote:
> From: Yang Xiwen
>
> It adds the driver for HIFEMAC Ethernet controller found on HiSilicon
> SoCs like Hi3798MV200. It's based on the mainstream linux driver, but
> quite a lot of code gets rewritten and cleaned up to
On Tue, Aug 08, 2023 at 06:05:16PM +0200, Robert Marko wrote:
> Marvell LinkStreet switches support Clause 45 MDIO on the internal bus.
>
> C45 read or writes require the register address to be written first to
> the SMI PHY Data register, and then a special C45 Write Address Register
> OP is
On Tue, Aug 08, 2023 at 06:05:15PM +0200, Robert Marko wrote:
> Driver is currently defining the mask and bit shifting itself,
> there is no need for that as U-Boot has generic bitfield macros that help
> us achieve the same result but in a cleaner way.
>
> Signed-off-by: Robert Marko
Applied
On Thu, Jul 27, 2023 at 09:58:14AM +0800, Dylan Hung wrote:
> Add optional reset control, especially for the Aspeed SOC. For the
> hardware without a reset line, the reset assertion/deassertion will be
> skipped.
>
> Signed-off-by: Dylan Hung
> Reviewed-by: Ryan Chen
> Reviewed-by: Ramon Fried
On Fri, Dec 09, 2022 at 02:33:14PM +0800, Ley Foon Tan wrote:
> Set upper 32bit address for DMA descriptors and buffer address to support
> 64-bit addressing.
>
> Signed-off-by: Ley Foon Tan
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
1 - 100 of 185 matches
Mail list logo
