Hello all,
Take my apologies for the late activity and also for the mailer I am using,
which may disturb the following reading.
> Le 6 mai 2018 à 02:13, Tom Rini a écrit :
>
> On Sat, May 05, 2018 at 04:04:08PM -0700, Vagrant Cascadian wrote:
>
>> Hello U-Boot.
>>
>>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi all,
Is there any tutorial to help integrating a new platform into mainline u-boot ?
I may propose a new board upsream but the only information I have are an older
refork uboot.
Any advice will be welcome.
Thanks
++GK
-BEGIN PGP
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Hi,
Le 07/04/2015 02:39, Tom Rini a écrit :
On Sat, Apr 04, 2015 at 06:13:18PM +0200, drEagle wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Le 03/04/2015 23:46, Vagrant Cascadian a écrit :
On 2015-03-25, drEagle wrote:
Le 21/03/2015
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
Le 03/04/2015 23:46, Vagrant Cascadian a écrit :
On 2015-03-25, drEagle wrote:
Le 21/03/2015 15:53, Vagrant Cascadian a écrit :
It seems that OpenRD Ultimate with u-boot 2015.04-rc3 and newer no
longer builds from source, both in Debian
Hi Vagrant,
Le 21/03/2015 15:53, Vagrant Cascadian a écrit :
It seems that OpenRD Ultimate with u-boot 2015.04-rc3 and newer no
longer builds from source, both in Debian and with mainline git. It
appears to have overgrown the size limits set for it:
Looks like the NAND partition map had to be
Hi Prafulla,
Any news of this patch ?
Regards,
Gérald
Le 23/12/2014 14:04, drEagle a écrit :
Hi Prafulla,
Is it okay also for this patch which is a GuruPlug refresh for same config as
the SheevaPlug one.
Regards,
Gérald
Le 19/12/2014 08:20, Gerald Kerma a écrit :
Refresh for newer
Hi,
any news for this patch ?
Regards,
Gérald,
Le 23/12/2014 14:01, drEagle a écrit :
Hi Pantelis,
Is these patches reviewed and upstreamed ?
Regards,
Gérald
Le 17/12/2014 11:18, Pantelis Antoniou a écrit :
Hi Gerald,
Last pull-req for mmc was last Friday, I intend to issue
Le 23/12/2014 13:01, Prafulla Wadaskar a écrit :
-Original Message-
From: drEagle [mailto:drea...@doukki.net]
Sent: 23 December 2014 17:14
To: Prafulla Wadaskar
Cc: u-boot@lists.denx.de; l...@openwrt.org
Subject: Re: [U-Boot] [PATCH v3 0/6] SHEEVAPLUG :
REFRESH 201412
Hi
Hi Prafulla,
Have you review these patchs ?
Have you any comments or suggestions ?
Le 17/12/2014 15:27, drEagle a écrit :
Le 17/12/2014 15:24, Prafulla Wadaskar a écrit :
-Original Message-
From: Gérald Kerma [mailto:drea...@doukki.net]
Sent: 17 December 2014 19:33
To: u-boot
Hi Pantelis,
Is these patches reviewed and upstreamed ?
Regards,
Gérald
Le 17/12/2014 11:18, Pantelis Antoniou a écrit :
Hi Gerald,
Last pull-req for mmc was last Friday, I intend to issue another this Friday
too.
Regards
— Pantelis
On Dec 17, 2014, at 11:22 , drEagle drea
Hi Prafulla,
Is it okay also for this patch which is a GuruPlug refresh for same config as
the SheevaPlug one.
Regards,
Gérald
Le 19/12/2014 08:20, Gerald Kerma a écrit :
Refresh for newer kernel.
Prepare ENV settings for guruplugs to be OpenWRT ready.
+--+
| UBOOT|
Sorry...
I post to the wrong list !
Regards,
Gérald
Le 18/12/2014 15:59, Gerald Kerma a écrit :
Add some kirkwood plugs to uboot-envtools
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma drea...@doukki.net
---
Hi,
Any chance to be included in the next release of u-boot ?
Regards,
Gérald
Le 15/12/2014 12:14, Mario Schuknecht a écrit :
2014-12-13 21:35 GMT+01:00 Gérald Kerma drea...@doukki.net
mailto:drea...@doukki.net:
This serie of patches speed up access time of MVEBUMMC driver
Le 17/12/2014 15:24, Prafulla Wadaskar a écrit :
-Original Message-
From: Gérald Kerma [mailto:drea...@doukki.net]
Sent: 17 December 2014 19:33
To: u-boot@lists.denx.de; Prafulla Wadaskar
Cc: albert.u.b...@aribaud.net; l...@openwrt.org; Gérald
Kerma
Subject: [PATCH v3 0/6]
Hi Prafulla,
Without LIBFDT feature, all newer kernel are unusable !
I agree with a review may be needed with : [PATCH v3 2/2] arm: marvell: fix ENV
and MTDPARTS for sheevaplug
is there any problem with : [PATCH v3 1/2] arm: marvell: add LIBFDT support to
sheevaplug
Regards,
Gérald
Le
Hi Mario,
I test this patch but it is unsuccessfull with the seevaplug :
After upgrade with U-Boot 2015.01-rc2-dirty (Nov 25 2014 - 08:10:39)
Marvell-Sheevaplug
Marvell mmc list
Hi Prafulla,
Can anyone review these patches ?
Regards,
On 25/10/2014 07:54, Gerald Kerma wrote:
These series of patch :
- fixes ENV and MTDPARTS for sheevaplug
- add FDT support for sheevaplug
- add the possibility to use a bootstrap from nand (bootscript)
Gerald Kerma (2):
arm:
On 27/10/2014 08:18, Stefan Roese wrote:
Hi!
On 25.10.2014 07:59, drEagle wrote:
With the latest u-boot mainline from denx git, the kirkwood image old
version/format are broken;
Sheevaplug u-boot.kwb is no more flahsable and brick the plug.
Using an older mkimage version still work
...@lists.denx.de] On Behalf Of drEagle
Sent: 30 October 2014 20:15
To: Stefan Roese; Luka Perkov
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [BUG] kwimage v0 broken
On 27/10/2014 08:18, Stefan Roese wrote:
Hi!
On 25.10.2014 07:59, drEagle wrote:
With the latest u-boot mainline from denx git
Hi,
With the latest u-boot mainline from denx git, the kirkwood image old
version/format are broken;
Sheevaplug u-boot.kwb is no more flahsable and brick the plug.
Using an older mkimage version still work with the same u-boot binary.
u-boot (in elf loading mode) still work well also.
If I
Thank you Prafulla,
Is there a pull request planned to master 2014-10 release from
git-marvell ?
Regards
Le 2014-10-01 13:21, Prafulla Wadaskar a écrit :
-Original Message-
From: drEagle [mailto:drea...@doukki.net]
Sent: 26 September 2014 14:47
To: Prafulla Wadaskar; Albert ARIBAUD
Hi,
Is there any actions to take theses patches mainlined ?
Regards,
On 21/09/2014 08:47, drEagle wrote:
Hi Prafulla,
Is there any chance for theses patches to be reviewed in time for next
release ?
Can you get it reviewed by anyone else ?
Enjoy,
On 15/09/2014 06:36, drEagle
Hi Prafulla,
Is there any chance for theses patches to be reviewed in time for next release ?
Can you get it reviewed by anyone else ?
Enjoy,
On 15/09/2014 06:36, drEagle wrote:
Hi Preafulla,
Any news about these patches ?
Regards,
On 09/09/2014 08:59, Prafulla Wadaskar wrote:
Hi
Hi Preafulla,
Any news about these patches ?
Regards,
On 09/09/2014 08:59, Prafulla Wadaskar wrote:
Hi Everybody,
Sorry for being inactive on the thread...
I will pull these patches and provide a pull request to albert soon...
Regards...
Prafulla . . .
-Original Message-
Hi,
Is there any chance for this patch to be upstreamed in the next release ?
On sheevaplug if you try the latest u-boot you may be brick the plug.
It will be corrupted because of the size of the of the u-boot binary.
The fix of env location proposed is a needed fix.
I have still some few
Lifshitz (2):
env_mmc: add mmc_get_env_addr() prototype
env_mmc: support env partition setup in runtime
DrEagle (1):
What is this nickname doing here ? Where is the full name of this person ?
I do not know that nickname was forbidden to contribute.
My Real name is Gérald Kerma
Hi Stefan,
On 26/07/2014 13:54, Stefan Roese wrote:
On 25.07.2014 21:07, Gerald Kerma wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver
and enable it for Sheevaplugs and OpenRD boards.
Signed-off-by: Gerald Kerma drea...@doukki.net
Looks good now, so:
Reviewed-by: Stefan Roese
Hi Stefan,
On 25/07/2014 09:15, Stefan Roese wrote:
Hi Gerald,
Thanks. But still some more comments below.
Thanks for the review.
Just sent a new version of the patch.
I still don't see why this function is needed for the MMC driver. It seems to
only be used from a debug() output. I
Hi Stefan,
On 25/07/2014 16:50, Stefan Roese wrote:
On 25.07.2014 15:27, Gerald Kerma wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver
and enable it for Sheevaplugs and OpenRD boards.
Signed-off-by: Gerald Kerma drea...@doukki.net
Please don't send this patch as base64 encoded. It
Please don't send this patch as base64 encoded. It makes it impossible to
apply this patch or run checkpatch on it.
I use git send-email and I have used the default encoding [UTF-8], what is
the preferred format that I may specify ?
My first name is Gérald.
So the message are sent in
On 25/07/2014 20:19, Stefan Roese wrote:
On 25.07.2014 19:07, Gerald Kerma wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver
and enable it for Sheevaplugs and OpenRD boards.
Signed-off-by: Gerald Kerma drea...@doukki.net
Thanks. This really looks better.
Only some mostly
Hi Pantelis,
Thansk for your feedback.
On 22/07/2014 17:36, Pantelis Antoniou wrote:
Hi Gerald,
On Jul 20, 2014, at 9:28 AM, Gerald Kerma wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver and enable it for
Sheevaplugs
and OpenRD boards.
- Fix some typo and missing lines from
Hi Prafulla,
On 20/07/2014 14:54, Prafulla Wadaskar wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver and
enable it for Sheevaplugs
and OpenRD boards.
- Fix some typo and missing lines from patch import
If above line is your change log info then it should put is below ---
Also
Hi Prafulla,
On 20/07/2014 14:54, Prafulla Wadaskar wrote:
This patch add Marvell kirkwood MVSDIO/MMC driver and
enable it for Sheevaplugs
and OpenRD boards.
- Fix some typo and missing lines from patch import
If above line is your change log info then it should put is below ---
Also
Le 05/07/2013 23:08, Albert ARIBAUD a écrit :
Hi Gérald,
Hello,
On Tue, 02 Jul 2013 23:17:51 +0200, DrEagle drea...@doukki.net wrote:
Hi,
I have started to rework all the MVSDIO driver, and some more enhancements,
to make a cool updated and workable SheevaPlug.
I have take the v2013.04
board
- add MVSATA sheevaplug support
- update sheevaplug defaults config
Signed-off-by: drEagle ub...@doukki.net
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
- add kirkwood_id to detect supported devices and revisions
Signed-off-by: drEagle ub...@doukki.net
arch/arm/cpu/arm926ejs/kirkwood/cpu.c |
arch/arm/include/asm/arch-kirkwood/cpu.h |
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
b/arch/arm/cpu/arm926ejs/kirkwood
- update kirkwood supported devices and revisions
Signed-off-by: drEagle ub...@doukki.net
arch/arm/include/asm/arch-kirkwood/config.h|
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 47771d5..c696dc4 100644
- add kw88f6282 device support
Signed-off-by: drEagle ub...@doukki.net
arch/arm/include/asm/arch-kirkwood/config.h|
arch/arm/include/asm/arch-kirkwood/kirkwood.h |
arch/arm/include/asm/arch-kirkwood/kw88f6282.h |
diff --git a/arch/arm/include/asm/arch-kirkwood/config.h
b/arch
- add kirkwood MVSDIO driver support
Signed-off-by: drEagle ub...@doukki.net
arch/arm/include/asm/arch-kirkwood/kirkwood.h |
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 47771d5..c696dc4 100644
--- a/arch/arm/include
because of timeout delay
Signed-off-by: drEagle ub...@doukki.net
drivers/mmc/Makefile |
drivers/mmc/mrvl_mmc.c |
include/mrvl_mmc.h |
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 1d6faa2
- add sheevaplug MVSDIO driver support
Signed-off-by: drEagle ub...@doukki.net
board/Marvell/sheevaplug/sheevaplug.c |
include/configs/sheevaplug.h |
diff --git a/board/Marvell/sheevaplug/sheevaplug.c
b/board/Marvell/sheevaplug/sheevaplug.c
index 16efe64
- add sheevaplug MVSATA driver support
Signed-off-by: drEagle ub...@doukki.net
include/configs/mv-common.h|
include/configs/sheevaplug.h |
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 405a842..e917e6f 100644
- update defaults sheevaplug config
Signed-off-by: drEagle ub...@doukki.net
include/configs/mv-common.h|
include/configs/sheevaplug.h |
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 405a842..e917e6f 100644
Hi,
I have started to rework all the MVSDIO driver, and some more enhancements, to
make a cool updated and workable SheevaPlug.
I have take the v2013.04 denx uBoot to base my patchs.
If you can take a look inside and give me needed feedback.
I want to precise that I do not easily practice GIT
Hi all,
-Original Message-
From: u-boot-bounces at lists.denx.de [mailto:u-boot-
bounces at lists.denx.de] On Behalf Of DrEagle
Sent: 22 September 2012 12:45
To: DrEagle
Cc: Lior Amsalem; u-boot at lists.denx.de; uboot at doukki.net
Subject: [U-Boot] [PATCH v2 0/5] Marvell
Le 24/09/2012 10:46, Prafulla Wadaskar a écrit :
-Original Message-
From: u-boot-boun...@lists.denx.de [mailto:u-boot-
boun...@lists.denx.de] On Behalf Of DrEagle
Sent: 22 September 2012 12:48
To: DrEagle
Cc: Lior Amsalem; u-boot@lists.denx.de; ub...@doukki.net
Subject: [U-Boot
This serie of patch add SDIO/MMC support to Sheevaplug board
Change from v1:
- Fix an issue with most SDHC cards because of timeout delay
drEagle (5):
Add Marvell SDIO/MMC driver for Kirkwood SoC
Add SDIO/MMC support for kirkwood SoC
Add SDIO/MMC support for Sheevaplug board
Fix env
Add Marvell SDIO/MMC driver for Kirkwood SoC
Signed-off-by: Gérald Kerma ub...@doukki.net
Signed-off-by: Lior Amsalem al...@marvell.com
---
drivers/mmc/Makefile |1 +
drivers/mmc/mrvl_mmc.c | 277
include/mrvl_mmc.h | 191
Add SDIO/MMC support for kirkwood SoC
Signed-off-by: drEagle drea...@doukki.net
---
arch/arm/include/asm/arch-kirkwood/kirkwood.h |1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 47771d5
Add SDIO/MMC support for Sheevaplug board
Signed-off-by: drEagle drea...@doukki.net
---
board/Marvell/sheevaplug/sheevaplug.c | 11 +++
include/configs/sheevaplug.h | 12
2 files changed, 23 insertions(+)
diff --git a/board/Marvell/sheevaplug/sheevaplug.c
b
Fix env address for Sheevaplug board
Move env address and offset from 0x6 to 0x8
Signed-off-by: drEagle drea...@doukki.net
---
include/configs/sheevaplug.h |5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/include/configs/sheevaplug.h b/include/configs
Fix an issue with most SDHC cards because of timeout delay
Signed-off-by: drEagle drea...@doukki.net
---
drivers/mmc/mrvl_mmc.c |5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/mrvl_mmc.c b/drivers/mmc/mrvl_mmc.c
index 8127961..bdafbc7 100644
--- a/drivers
Hi,
I found an issue of timeout problems.
Now all my cards read correctly, quickly and efficiently.
If someone need a precompiled u-boot binary for testing this version, fell free
to ask.
I will put it available online.
Le 22/09/2012 09:15, DrEagle a écrit :
This serie of patch add SDIO
This patch add a generic MMC driver for Marvell Kirkwood SoC
drEagle (1):
Add Marvell SDIO/MMC driver for Kirkwood SoC
drivers/mmc/Makefile |1 +
drivers/mmc/mrvl_mmc.c | 277
include/mrvl_mmc.h | 191
Signed-off-by: Gérald Kerma ub...@doukki.net
Signed-off-by: Lior Amsalem al...@marvell.com
---
drivers/mmc/Makefile |1 +
drivers/mmc/mrvl_mmc.c | 277
include/mrvl_mmc.h | 191 +
3 files changed, 469
This serie of patch add SDIO/MMC support to Sheevaplug board
drEagle (4):
Add Marvell SDIO/MMC driver for Kirkwood SoC
Add SDIO/MMC support for kirkwood SoC
Add SDIO/MMC support for Sheevaplug board
Fix env address for Sheevaplug board
arch/arm/include/asm/arch-kirkwood/kirkwood.h
Signed-off-by: Gérald Kerma ub...@doukki.net
Signed-off-by: Lior Amsalem al...@marvell.com
---
drivers/mmc/Makefile |1 +
drivers/mmc/mrvl_mmc.c | 277
include/mrvl_mmc.h | 191 +
3 files changed, 469
Signed-off-by: drEagle drea...@doukki.net
---
arch/arm/include/asm/arch-kirkwood/kirkwood.h |1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 47771d5..343214b 100644
--- a/arch/arm/include
Signed-off-by: drEagle drea...@doukki.net
---
board/Marvell/sheevaplug/sheevaplug.c | 11 +++
include/configs/sheevaplug.h | 12
2 files changed, 23 insertions(+)
diff --git a/board/Marvell/sheevaplug/sheevaplug.c
b/board/Marvell/sheevaplug/sheevaplug.c
index
Signed-off-by: drEagle drea...@doukki.net
---
include/configs/sheevaplug.h |5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 7d710bf..a10e825 100644
--- a/include/configs/sheevaplug.h
+++ b/include
I have a patch for the support of a generic MMC driver for kirkwood Soc.
I want to make some few more fix to have sheevaplugs been updated also.
Here is the complete changelog of my patch :
- Add Marvell SDIO/MMC driver for Kirkwood SoC
- Add SDIO/MMC support for Sheevaplug board
- Fix env
.
Best regards,
Wolfgang Denk
Amicalement,
drEagle
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
rootfstype=ubifs\0
/*
* Ethernet driver configuration
Regards,
Luka
Regards,
DrEagle
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
Le 09/05/2012 19:21, Daniel Stodden a écrit :
On Wed, 2012-05-09 at 08:25 -0500, David Purdy wrote:
On Wed, May 9, 2012 at 3:00 AM, Daniel Stodden
daniel.stod...@googlemail.com wrote:
Have you tried to put the bootrom in the debug mode ?
Hi,
Le 08/05/2012 01:40, Daniel Stodden a écrit :
On Sun, 2012-05-06 at 12:53 -0500, David Purdy wrote:
On Wed, May 2, 2012 at 2:16 PM, Luka Perkov ub...@lukaperkov.net wrote:
The kwboot program boots boards based on Marvell's Kirkwood platform
via Xmodem over their integrated UART.
Hi Luka,
Le 19/03/2012 16:50, Marek Vasut a écrit :
Dear Luka Perkov,
Hi Marek,
On Sun, Mar 18, 2012 at 04:15:53PM +0100, Marek Vasut wrote:
+ * Copyright (C) 2011 G??rald Kerma drea...@doukki.net
Can you please fix your name here?
I think your mail agent is not displaying UTF8
Hi all,
may be it can be also imported in debian-uboot package ?
more available at :
https://doukki.net/doku.php?id=wiki:notes:ib-nas6220-b
Le 16/03/2012 00:59, Luka Perkov a écrit :
Add support for new boards RaidSonic ICY BOX NAS6210 and NAS6220 boards.
Only difference between boards is
Hi,
I'm trying to add a new architecture to uboot.
What is the process and there is a documentation ?
It's an icybox nas6220-b which is similar to sheevaplug, except for
memory size and nand limit.
wiki.nas-portal.org/index.php/IB-NAS6220-B
Le 14/10/2011 10:24, DrEagle a écrit :
Hi,
I'm trying to add a new architecture to uboot.
What is the process and there is a documentation ?
It's an icybox nas6220-b which is similar to sheevaplug, except for
memory size and nand limit.
wiki.nas-portal.org/index.php/IB-NAS6220-B
70 matches
Mail list logo