On 2022-08-26 14:33, Manoj Sai wrote:
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index 388f3bc9ff..140eba3d1c 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -55,11 +55,9 @@
#define CONFIG_SYS_INIT_RAM_SIZE 0x8
-/*
Hi,
On 2021-04-06 05:59, Peng Fan (OSS) wrote:
Burn the flash.bin to the MicroSD card at offset 32KB:
.. code-block:: bash
$sudo dd if=build/flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
+ $sudo dd if=build/u-boot.itb of=/dev/sd[x] bs=1K seek=384 conv=notrunc; sync
Hi Fabio,
On 2021-02-23 00:10, Fabio Estevam wrote:
Hi Peter,
On Sun, Feb 14, 2021 at 4:20 PM Peter Bergin wrote:
Update imx-atf and firmware-imx to latest released versions.
Update address of ATF_LOAD_ADDR that has changed to 0x97 in imx-atf
commit
directly inside u-boot source dir. Restructure
the workflow
and copy binaries after defconfig to ensure that build directory is created.
Signed-off-by: Peter Bergin
Cc: Andrey Zhizhikin
---
v2:
- Corrected ATF_LOAD_ADDR in commit message
- Changed workflow to copy binaries after build directory
Hi Andrey,
thanks for the review!
On 2021-02-12 19:16, ZHIZHIKIN Andrey wrote:
Hello Peter,
-Original Message-
From: Peter Bergin
Sent: Friday, February 12, 2021 2:57 PM
To: u-boot@lists.denx.de
Cc: Peter Bergin ; ZHIZHIKIN Andrey
Subject: [PATCH] doc: board: freescale: imx8mp_evk
source dir.
Signed-off-by: Peter Bergin
Cc: Andrey Zhizhikin
---
doc/board/freescale/imx8mp_evk.rst | 24
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/doc/board/freescale/imx8mp_evk.rst
b/doc/board/freescale/imx8mp_evk.rst
index ccffcf7257..5ca3bb8199
Hi Andrey,
On 2021-02-12 09:22, ZHIZHIKIN Andrey wrote:
Hello Peter,
In the latest ATF, the LOAD_ADDR has been changed from 0x96 to 0x97. This was
done by commit 48733cb4e ("MLK-24913: plat: imx8mp: change the bl31 physical load
address").
Thanks for the notice! I hadn't seen that.
Hi,
this has been put aside for a while but tested this again and problem
still remains for me.
Hi,
I'm following the README
to bring up u-boot on a imx8mp EVK board. My
boot ends up in this on the
console:
U-Boot SPL 2020.10-rc5-00049-gd44d46e9fa (Sep 30 2020 - 11:46:20 +0200)
Hi,
I'm following the README
(https://gitlab.denx.de/u-boot/u-boot/-/tree/master/board/freescale/imx8mp_evk)
to bring up u-boot on a imx8mp EVK board. My boot ends up in this on the
console:
U-Boot SPL 2020.10-rc5-00049-gd44d46e9fa (Sep 30 2020 - 11:46:20 +0200)
Normal Boot
WDT:
9 matches
Mail list logo