On Fri, 2 Aug 2024 at 23:00, Heiko Stuebner wrote:
>
> The Rock 5 ITX is board in ITX form factor using the RK358 SoC
type "is a board"
typo: "RK3588"
> It can be powered either by 12V, ATX power-supply or PoE.
>
> Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
> 2*2.5
Dragan Simic
> Signed-off-by: Christopher Obbard
Reviewed-by: Philipp Tomsich
On Mon, 3 Apr 2023 at 22:48, Jonas Karlman wrote:
>
> Add support for RK3588 to the sdhci driver. RK3588 has the inverter flag
> in TXCLK reg instead of RXCLK and also make use of a new CMDOUT reg.
> Add and use a quirks field to support such quirks.
>
> Signed-off-by: Jonas Karlman
> ---
> driv
On Sat, 23 Jul 2022 at 13:29, Nicolas Frattaroli
wrote:
>
> The default priority for the quality of service for the video
> output results in unsightly glitches on the output whenever there
> is memory pressure on the system, which happens a lot.
>
> This sets the VOP QoS to high priority, which f
On Fri, 18 Nov 2022 at 17:13, John Keeping wrote:
>
> This is read-only data, so mark it as such.
>
> Signed-off-by: John Keeping
Reviewed-by: Philipp Tomsich
On Fri, 18 Nov 2022 at 17:13, John Keeping wrote:
>
> Key data is never written so the parameter can be const, which allows
> putting fixed keys in .rodata.
>
> Signed-off-by: John Keeping
Reviewed-by: Philipp Tomsich
On Fri, 15 Jul 2022 at 17:37, Quentin Schulz wrote:
>
> From: Quentin Schulz
>
> On MMC storage media, the TPL/SPL needs to be flashed at offset 32KB.
> Instead of requesting the user to put the input the appropriate offsets,
> let's create u-boot-rockchip.bin with the padding already added.
NAK
On Thu, 14 Jul 2022 at 16:18, John Keeping wrote:
>
> Rockchip SoCs need the boot_devices array defined in order to map the
> bootloader's value to a U-Boot device. Implement this for rk3308.
>
> Signed-off-by: John Keeping
Reviewed-by: Philipp Tomsich
On Tue, 12 Jul 2022 at 17:38, Quentin Schulz wrote:
>
> From: Quentin Schulz
>
> The check to perform is on CONFIG_SPL_GPIO and not SPL_GPIO.
> Because this was never compiled in, it missed an include of cru.h that
> was not detected before. Let's include it too.
>
> Fixes: 07586ee4322a ("rockchi
On Tue, 12 Jul 2022 at 17:38, Quentin Schulz wrote:
>
> From: Quentin Schulz
>
> The check to perform is on CONFIG_SPL_DM_REGULATOR and not
> SPL_DM_REGULATOR.
>
> Fixes: 07586ee4322a ("rockchip: rk3399: Support common spl_board_init")
> Cc: Quentin Schulz
> Signed-off-by: Quentin Schulz
> ---
On Wed, 13 Apr 2022 at 11:07, Peng Fan (OSS) wrote:
>
> From: Peng Fan
>
> Since COUNTER_FREQUENCY is obselete, so set cntfrq_el0 if
> CONFIG_COUNTER_FREQUENCY is valid
>
> Signed-off-by: Peng Fan
Reviewed-by: Philipp Tomsich
On Tue, 22 Feb 2022 at 02:31, Peter Geis wrote:
>
> Fixup the bootrom recovery mode code to function in spl, so we can
> handle recovery mode in case u-boot loading is broken.
>
> Signed-off-by: Peter Geis
> ---
> arch/arm/mach-rockchip/Makefile| 6 +++---
> arch/arm/mach-rockchip/boot_
On Fri, 11 Mar 2022 at 19:15, Alper Nebi Yasak wrote:
>
> On 11/03/2022 18:43, Tom Rini wrote:
> > On Fri, Mar 11, 2022 at 12:05:42AM +0300, Alper Nebi Yasak wrote:
> >> I have a few Rockchip-related series [1] that I was expecting to land
> >> for v2022.04 (including improvements for chromebook_b
On Mon, 3 Jan 2022 at 13:04, wrote:
>
> From: Quentin Schulz
>
> Philipp does not work at Theobroma Systems anymore so let's swap
> Philipp's address with mine.
>
> Cc: Philipp Tomsich
> Cc: Quentin Schulz
> Signed-off-by: Quentin Schulz
Reviewed-by: Philipp Tomsich
On Wed, 3 Nov 2021 at 14:16, Simon Glass wrote:
>
> Some boards do not enable SPL_SERIAL so cannot use the debug UART. Add
> this condition to the code and drop use of the preprocessor while we are
> here.
>
> Signed-off-by: Simon Glass
Reviewed-by: Philipp Tomsich
On Mon, 25 Oct 2021 at 08:34, Nico Cheng wrote:
>
> We configured the drive strength and security of EMMC in
> arch_cpu_init().
>
> Signed-off-by: Nico Cheng
> ---
>
> Changes in v2:
> We use the rk_clrreg function instead of the writel to set eMMC sdmmc0 to
> secure.
> Modify comments to make th
On Mon, 25 Oct 2021 at 08:34, Nico Cheng wrote:
>
> Enable sdhci and sdmmc0 node in rk3568-u-boot.dtsi
>
> Signed-off-by: Nico Cheng
Reviewed-by: Philipp Tomsich
On Mon, 25 Oct 2021 at 08:34, Nico Cheng wrote:
>
> Enable SPL support in Kconfig and add some related option in
> rk3568_common.h
>
> Signed-off-by: Nico Cheng
> Signed-off-by: Jason Zhu
Acked-by: Philipp Tomsich
On Fri, 8 Oct 2021 at 04:01, Nico Cheng wrote:
>
> We configured the drive strength and security of EMMC in
> arch_cpu_init().
Could you point me to a public version of the TRM (and
ideally also of the datasheet), so I can review this series?
Thanks,
Philipp.
>
> Signed-off-by: Nico Cheng
> --
On Thu, 5 Aug 2021 at 10:28, Jon Lin wrote:
>
> Make px30 SFC clock configurable
>
> Signed-off-by: Jon Lin
Reviewed-by: Philipp Tomsich
ame
> manufacturer/ID.
>
> Signed-off-by: Chris Morgan
> Signed-off-by: Jon Lin
Reviewed-by: Philipp Tomsich
f used, must also be disabled in SPL
> mode when using A-TF anyway.
>
> Signed-off-by: Chris Morgan
> Signed-off-by: Jon Lin
Reviewed-by: Philipp Tomsich
On Tue, 29 Jun 2021 at 10:24, Yifeng Zhao wrote:
>
> This patch adds support for the RK3568 platform to this driver.
>
> Signed-off-by: Yifeng Zhao
I thought I had raised an objection to this patch previously, but did
not see a discussion...
So here we go again.
In 2017, we decided to split the
On Tue, 29 Jun 2021 at 10:25, Yifeng Zhao wrote:
>
> This enable hs400 and SDMA support for emmc on evb-rk3399.
>
> Signed-off-by: Yifeng Zhao
Reviewed-by: Philipp Tomsich
On Thu, 22 Jul 2021 at 01:14, Dennis Gilmore wrote:
>
> From: Dennis Gilmore
>
> This is a stripped down version of the vendor U-Boot patch by Aditya
> Prayoga found in the armbian repository. This patch is enough to have
> the 1G ethernet port, the micro SD card, eMMC, PCIe and UART. It sets
> u
I had attempted to merge HDMI using this approach in 2017, but after
some discussions with Simon, we used a 'mini-drivers' approach.
I would like to see a similar approach taken here.
See
https://patchwork.ozlabs.org/project/uboot/patch/1493394792-20743-4-git-send-email-philipp.toms...@theobroma-s
On Mon, 28 Jun 2021 at 11:20, Yifeng Zhao wrote:
>
> This enable hs200 and hs400 support for emmc on evb-rk3399.
>
> Signed-off-by: Yifeng Zhao
Reviewed-by: Philipp Tomsich
> On 02.12.2020, at 13:37, Andre Heider wrote:
>
> On 02/12/2020 11:35, Stefan Roese wrote:
>> On 02.12.20 10:12, Pali Rohár wrote:
>>> On Wednesday 02 December 2020 09:09:15 Stefan Roese wrote:
On 02.12.20 01:33, Pali Rohár wrote:
> On Wednesday 25 November 2020 19:20:06 Pali Rohár w
Simon,
On Wed, 25 Nov 2020 at 16:30, Simon Glass wrote:
> Here is a pointer to the docs I saw:
>
>
https://docs.python.org/3/library/argparse.html#argparse.ArgumentParser.set_defaults
>
> "Parser-level defaults can be particularly useful when working with
> multiple parsers. See the add_subparser
Simon,
On Wed, 25 Nov 2020 at 00:41, Simon Glass wrote:
> According to the Python documentation and my testing, it should
> propagate. Do you know what is going wrong here? If there is a
> problem, we should update the comment.
I don't see any code for propagating this in the argparse module:
t; > for the gcc project) are settings from subparsers, these would still
> > require an explicit commandline option mirroring the (ignored) default.
> >
> > This change ensures that defaults are updated in all parsers.
> >
> > Signed-off-by: Philipp Tomsich
>
Add defaults for FSF/GNU projects, such as gcc, that provide sensible
settings for those projects.
Signed-off-by: Philipp Tomsich
---
tools/patman/settings.py | 7 ++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/tools/patman/settings.py b/tools/patman/settings.py
index
To enable use of patman with FSF/GNU projects, such as GCC or
Binutils, no Signed-off-by may be added. This adds a command
line flag '--no-signoff' to suppress adding signoffs in patman
when processing commits.
Signed-off-by: Philipp Tomsich
---
tools/patman/control.py | 6 +++
commandline option mirroring the (ignored) default.
This change ensures that defaults are updated in all parsers.
Signed-off-by: Philipp Tomsich
---
tools/patman/settings.py | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/patman/settings.py b/tools/patman/settings.py
index
gt; or LPDDR2/3 initialized would require a code modification.
>
> So add Kconfig options similar to RK3399 to allow selecting the DDR4
> and LPDDR2/3 options instead, while DDR3 stays the default as before.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
> On 17.09.2020, at 11:42, Jack Mitchell wrote:
>
> In order to correctly calculate the designware watchdog
> timeouts, the watchdog clock is required. Implement required
> clocks to facilitate this.
>
> Signed-off-by: Jack Mitchell
Reviewed-by: Philipp Tomsich
> On 01.07.2020, at 17:47, Tom Rini wrote:
>
> Unless we mark the function as 'static inline' it may end up being
> non-inlined by the compiled and result in duplicate functions.
>
> Cc: Jagan Teki
> Cc: Kever Yang
> Signed-off-by: Tom Rini
Reviewed-by: Philipp Tomsich
is follows a similar change introduced into the Linux kernel at
> https://lore.kernel.org/netdev/20200609133140.1421109-2-he...@sntech.de
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
y delay values like now, mimic this behaviour.
>
> The behaviour is the same for all of vsc8530/8531/8540/8541 so move that
> to a shared function while at it.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
d with mass-storage and usb-ethernet on both usb3 and usb2 ports.
>
> Signed-off-by: Heiko Stuebner
> Reviewed-by: Kever Yang
Reviewed-by: Philipp Tomsich
nging them in sync again.
>
> This mimics the upstream Linux change found on:
> http://lore.kernel.org/r/20200604091239.424318-1-he...@sntech.de
>
> Signed-off-by: Heiko Stuebner
> Reviewed-by: Kever Yang
Reviewed-by: Philipp Tomsich
> On 04.06.2020, at 16:51, Jagan Teki wrote:
>
> On rockchip platforms, SPI boot image creation is not
> straightforward like MMC boot image creation where former
> requires to specify tpl, spl in multimage format in mkimage,
> and later simply do a concatenate mkimaged-tpl with spl.
>
> On t
eiko Stuebner
Reviewed-by: Philipp Tomsich
were done.
>
> And even then, if changes need to be made, this can very well also
> happen in the atf context itself, so there is no real need to
> diverge from the established build procedure and we can just go
> back to using the main make_fit_atf.py script.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
tream Linus commit found on
> https://lore.kernel.org/r/20200603132836.362519-1-he...@sntech.de
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
> On 03.06.2020, at 16:59, Heiko Stuebner wrote:
>
> From: Heiko Stuebner
>
> Tabs not spaces, so transform it to the common styling.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
e rockchip_* helpers to setup cpuid and
> macaddr")
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
EXT_BASE it is easy
> to enable a TPL build as well. Only obstacle is the usb-specific handling
> for the puma regulator, so make this conditional on actual usb options
> being enabled in SPL and U-Boot proper.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
e sd-slot, uarts, etc.
>
> So to untagle this and bring the whole thing more in line with mainline
> Linux, bring the rk3399-puma-haikou.dts over as well, drop the separate
> DDR-option devicetrees and instead replace them with a puma Kconfig option
> to select and include the needed DDR variant.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
he
> ATF path as well.
>
> Signed-off-by: Heiko Stuebner
> Reviewed-by: Kever Yang
Reviewed-by: Philipp Tomsich
ncreased in the future.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
t used anymore
> when returning from the function and should of course be freed.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
issible value), which makes
> verifications of signatures with that saltlen fail.
>
> Until this gets implemented at least document this behaviour.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
led for SPL, for example to
> verify u-boot proper from spl.
>
> So fix this by using the existing helpers to distinguis between
> build-steps.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
the established code.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
) to $(SPL_TPL_) to distinguish
> between both. If someone really needs FIT signature checking in
> TPL as well, a new TPL_RSA_VERIFY config symbol needs to be added.
>
> Signed-off-by: Heiko Stuebner
> Reviewed-by: Philipp Tomsich
> Reviewed-by: Kever Yang
> ---
> changes in
> conversion from the dt's big-endian to the needed uint64 value.
>
> Fixes: fc2f4246b4b3 ("rsa: Split the rsa-verify to separate the modular
> exponentiation")
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
;
>
> So similar to the main FIT_SIGNATURE entry selects HASH,
> select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE.
>
> Cc: Heinrich Schuchardt
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
ey to get included.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
> option to not end up in compile errors like:
>
>u-boot/lib/rsa/rsa-verify.c:328: undefined reference to `rsa_mod_exp'
>
> So select SPL_CRYPTO_SUPPORT in SPL_FIT_SIGNATURE.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
tinguis
nit: distinguis -> distinguish
> between both. If someone really needs FIT signature checking in
> TPL as well, a new TPL_RSA_VERIFY config symbol needs to be added.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
ENERATOR.
>
> In the script-case it will need to know what key to include for the
> key-hint and specified algorithm, so add an option for that key-name.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
> On 15.04.2020, at 05:25, Deepak Das wrote:
>
> adapting commit fa2047c47310 ("rockchip: rk3328: enable spl-fifo-mode
> for emmc and sdmmc") for rk3399.
> Since mmc to sram can't do dma, add patch to prevent aborts transferring
> TF-A parts.
>
> Signed-off-by: Deepak Das
> ---
> arch/arm/dts/r
> On 20.02.2020, at 04:10, Finley Xiao wrote:
>
> This adds the necessary data for handling eFuse on the rk3288.
>
> Signed-off-by: Finley Xiao
Reviewed-by: Philipp Tomsich
Major rework required: see below.
> ---
> drivers/misc/
> On 11.12.2019, at 14:26, Jagan Teki wrote:
>
> The maximum transfer length (in a single transaction) for the Rockchip
> SPI controller is 64Kframes (i.e. 0x1 frames) of 8bit or 16bit
> frames and is encoded as (num_frames - 1) in CTRLR1.
>
> So the 0x1 is offset value for 64K but th
Heiko,
> On 28.11.2019, at 10:44, Heiko Stuebner
> wrote:
>
> On 27.11.19 11:12, Paul Kocialkowski wrote:
>> Some generic PX30 SoMs found in the wild use UART3 as their debug output
>> instead of UART2 (used for MMC) and UART5.
>>
>> Make it possible to use UART3 as early debug output, with th
> On 26.11.2019, at 14:15, Andy Yan wrote:
>
> We need load some parts of ATF to sram, but rockchip
> dwmmc controllers can't do dma to non-ddr addresses
> space, so set the mmc controller into fifo mode in spl.
>
> Signed-off-by: Andy Yan
Re
ot correctly
> put both mmc controllers into fifo-mode, which also circumvents the
> issue for now.
>
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Sorry, I was confused and meant...
> On 20.11.2019, at 12:09, Philipp Tomsich
> wrote:
>
>
>
>> On 19.11.2019, at 12:04, Heiko Stuebner wrote:
>>
>> From: Heiko Stuebner
>>
>> Rockchips dwmmc controllers can't do dma to non-ddr addres
ead FIT image.
>
> So add handling for a u-boot,spl-fifo-mode to not put the mmc
> controllers into fifo mode for all time.
>
> The regular fifo-mode property still takes precedent and only
> if not set do we check for the spl-specific property.
>
> Suggested-by: Philipp Tomsic
Heiko,
> On 19.11.2019, at 11:03, Heiko Stuebner wrote:
>
> From: Heiko Stuebner
>
> As part of loading trustedfirmware, the SPL is required to place portions
> of code into the socs sram but the mmc controllers can only do dma
> transfers into the regular memory, not sram.
>
> The results of
refix.
> Therefore add the missing ones in other boards.
Good catch. One can thus tell what platform I originally tested this on ;-)
> Signed-off-by: Levin Du
Reviewed-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
ive ethaddr from cpuid")
> Signed-off-by: Heiko Stuebner
Reviewed-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Joel,
> On 10.09.2019, at 01:07, Simon Glass wrote:
>
> Hi Joel,
>
> On Sat, 7 Sep 2019 at 18:34, Joel Peshkin wrote:
>>
>>
>> Hi Simon,
>>
>> I need to create and upstream driver for a set of functions that manage
>> volatile information that persist across reboots. These are simple
Kever,
> On 02.08.2019, at 09:39, Matwey V. Kornilov wrote:
>
> From: Kever Yang
>
> This driver supports DDR3/LPDDR3/DDR4 SDRAM initialization.
How is the unified driver for the Designware DRAM controller coming along?
We’ve had that discussion over a year ago and it seems as if we’re still
> On 25.07.2019, at 18:39, Rohan Garg wrote:
>
> Hey
> On Wednesday, 24 July 2019 14:26:44 CEST Kever Yang wrote:
>> Hi Rohan,
>>
>> On 2019/7/24 下午7:09, Rohan Garg wrote:
>>> We should use the shared helpers to setup the necessary parts
>>>
>>> Signed-off-by: Rohan Garg
>>> ---
>>>
>>> ..
> On 14.07.2019, at 12:40, Niklas Schulze wrote:
>
> The RK3288 HDMI driver's rk3288_hdmi_enable() currently lacks a call to
> dw_hdmi_enable(). Thus, the HDMI output never gets enabled.
>
> Signed-off-by: Niklas Schulze
> Cc: Philipp Tomsich
Re
> On 11.07.2019, at 18:28, Rohan Garg wrote:
>
> Signed-off-by: Rohan Garg
Your commit message is empty on this one.
Please revise.
Thanks,
Philipp.
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
> On 08.07.2019, at 03:40, Peng Fan wrote:
>
> Pass spl_image and bootdev to board_return_bootrom.
> i.MX8MN needs the args to let ROM to load images
>
> Cc: Simon Glass
> Cc: Philipp Tomsich
> Cc: Kever Yang
> Signed-off-by: Peng Fan
R
> On 09.07.2019, at 15:55, Kever Yang wrote:
>
> No code is using this header file, remove it.
You are not removing the header file, but are simply not including it.
Thanks,
Phil.
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/li
> On 12.06.2019, at 17:30, Jagan Teki wrote:
>
> On Tue, Jun 11, 2019 at 8:36 PM Philipp Tomsich
> <mailto:philipp.toms...@theobroma-systems.com>> wrote:
>>
>>
>>
>>> On 11.06.2019, at 17:03, Jagan Teki wrote:
>>>
>&
> On 11.06.2019, at 16:50, Jagan Teki wrote:
>
> Yes, it can be possible to break this series into multiple sub series
> but idea here is to mark all the required changes to support LPDDR4
> in rk3399 in one set. if required we can break it from next versions.
>
> This is the initial set for
> On 11.06.2019, at 17:03, Jagan Teki wrote:
>
> On Tue, Jun 11, 2019 at 8:23 PM Philipp Tomsich
> wrote:
>>
>>
>>
>>> On 11.06.2019, at 16:50, Jagan Teki wrote:
>>>
>>> Yes, it can be possible to break this series into multiple
+Kever.
> On 08.06.2019, at 20:05, Tom Rini wrote:
>
> Hey,
>
> With Heinrich's series to enforce a size limit on SPL and Simon
> Goldschmidt's enhancements on top of that, we're now seeing that
> tinker-rk3288 has an SPL that is too large to function. And it's now
> also causing the build to
Jagan,
> On 09.05.2019, at 14:36, Jagan Teki wrote:
>
> On Thu, May 9, 2019 at 6:01 PM Paul Kocialkowski
> mailto:paul.kocialkow...@bootlin.com>> wrote:
>>
>> Hi,
>>
>> On Thu, 2019-05-09 at 16:15 +0530, Jagan Teki wrote:
>>> Hi Paul,
>>>
>>> On Thu, May 9, 2019 at 12:38 PM Paul Kocialkowski
debug_uart_init() to rk322x.c
rockchip: rk3288: use grf structure to access soc_con2
rockchip: rk3288: add board_debug_uart_init()
rockchip: rk3368: move board_debug_uart_init() to rk3368.c
rockchip: rk3399: use grf structure to access reg
rockchip: rk3399: add board_debug_
> rockchip platform header file is in 'arch-rockchip'
> instead of arch-$(SOC) for all SoCs.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> ---
>
> arch/arm/cpu/armv8/start.S | 4
> arch/arm/include/asm/gpio.h | 2 +-
> arch/arm
> Rockchip use 'arch-rockchip' instead of arch-$(SOC) as common
> header file path, so that we can get the correct path directly.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> ---
>
> .../include/asm/arch-rockchip/ddr_rk3188.h| 2 +-
> The ARCH_SOC name default as 'rockchip' and we put all the
> header file in 'arch/arm/include/asm/arch-rockchip/', but
> the 'rockchip' is not the SOC name, let's correct it after
> we update all the source file.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsiich
> ---
>
> arch/ar
> Prefer to use structure to access register if we could.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> Tested-by: Andy Yan
> ---
>
> arch/arm/mach-rockchip/rk3399/rk3399.c | 5 -
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
Appl
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file for all rockchip SoCs later.
>
> Signed-off-by: Kever Yang
>
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file for all rockchip SoCs later.
>
> Signed-off-by: Kever Yang
>
> Move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file later for all rockchip SoCs.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> Tested-by: Andy Yan
> ---
>
> arch/arm/mach-ro
> Prefer to use structure to access register if we can.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> ---
>
> arch/arm/mach-rockchip/rk3288/rk3288.c | 6 --
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
Applied
> Move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file later for all rockchip SoCs.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> ---
>
> arch/arm/mach-rockc
> Use board_debug_uart_init() for UART iomux init instead of
> do it in board_init_f, and move the function to soc file so
> that we can find all the soc/board setting in soc file and
> use a common board file.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> Enable debug uart for kylin board in defconfig.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> ---
>
> configs/kylin-rk3036_defconfig | 4
> 1 file changed, 4 insertions(+)
>
Applied to u-boot-rockchip, thanks!
___
> All Rockchip SoCs use DEBUG_UART_BOARD_INIT to init per board
> UART IOMUX, enable it by default.
>
> Signed-off-by: Kever Yang
> Reviewed-by: Philipp Tomsich
> ---
>
> arch/arm/Kconfig | 1 +
> arch/arm/mach-rockchip/Kconfig | 4
> 2 fi
88_common.h | 2 +-
> include/configs/rk322x_common.h | 2 +-
> include/configs/rk3288_common.h | 2 +-
> include/configs/rk3368_common.h | 2 +-
> include/configs/rv1108_common.h | 2 +-
> 100 files changed, 288 insertions(+), 290 deletions(-)
>
Reviewed-by: Philipp Tomsich
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
1 - 100 of 3364 matches
Mail list logo