Hi,
> -Original Message-
> From: Siva Durga Prasad Paladugu
> Sent: Tuesday, May 28, 2019 3:36 PM
> To: Michal Simek ; Lukasz Majewski
>
> Cc: u-boot@lists.denx.de; ma...@denx.de; jjhib...@ti.com;
> s...@chromium.org; patrick.delau...@st.com
> Subject: RE: [PATCH
Hi,
> -Original Message-
> From: Michal Simek [mailto:michal.si...@xilinx.com]
> Sent: Monday, April 1, 2019 4:10 PM
> To: Siva Durga Prasad Paladugu ; Lukasz Majewski
>
> Cc: u-boot@lists.denx.de; ma...@denx.de; jjhib...@ti.com;
> s...@chromium.org; patrick.delau...
Hi Lukasz,
> -Original Message-
> From: Lukasz Majewski [mailto:lu...@denx.de]
> Sent: Tuesday, May 21, 2019 5:52 PM
> To: Siva Durga Prasad Paladugu
> Cc: Jean-Jacques Hiblot ; ma...@denx.de; Marcel Ziswiler
> ; u-boot@lists.denx.de; Miquel Raynal
> ; Stefan Roese
Hi,
-Original Message-
From: Marek Vasut [mailto:ma...@denx.de]
Sent: Tuesday, May 21, 2019 6:14 PM
To: Siva Durga Prasad Paladugu ; Jean-Jacques Hiblot
; lu...@denx.de
Cc: Marcel Ziswiler ; u-boot@lists.denx.de; Miquel
Raynal ; Stefan Roese ; Tom Rini
; Ryder Lee ; Heinrich
Hi,
Tested the series with one out of tree
patch(https://marc.info/?l=u-boot&m=155409909828219 ) on Xilinx ZynqMP and it
looks fine.
We may need to finalize on https://marc.info/?l=u-boot&m=155409909828219 as
well.
U-Boot 2019.04-rc4-00065-g5063fa3-dirty (May 21 2019 - 16:58:34 +0530)
Model:
Hi Lukasz,
> -Original Message-
> From: Lukasz Majewski [mailto:lu...@denx.de]
> Sent: Monday, April 01, 2019 4:04 PM
> To: Siva Durga Prasad Paladugu
> Cc: u-boot@lists.denx.de; ma...@denx.de; jjhib...@ti.com;
> s...@chromium.org; patrick.delau...@st.com; Michal Sime
Hi Lukasz,
> -Original Message-
> From: Lukasz Majewski [mailto:lu...@denx.de]
> Sent: Monday, April 01, 2019 1:03 PM
> To: Siva Durga Prasad Paladugu
> Cc: u-boot@lists.denx.de; ma...@denx.de; jjhib...@ti.com;
> s...@chromium.org; patrick.delau...@st.com; Michal Sime
If CONFIG_PHY is not enabled then the dwc3_setup_phy()
returns ENOTSUPP which can be still valid and intentional
so modify error check to handle this -ENOTSUPP.
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/usb/dwc3/dwc3-generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion
superspeed. Without this patch, the max packet size is
overflowed to zero as the bMaxPacketsize is of u8 and hence
host is not able to detect this device.
Signed-off-by: Siva Durga Prasad Paladugu
Reviewed-by: Bin Meng
---
Changes from RFC:
- Fixed typo in description as per comment.
---
drivers
superspeed. With out this patch, the max packet size is
overflowed to zero as the bMaxPacketsize is of u8 and hence
host is not able to detect this device.
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/usb/gadget/composite.c | 17 +++--
1 file changed, 15 insertions(+), 2
From: Vipul Kumar
This patch added support to read ITAP and OTAP delay values from
the device tree. If the DT does not contain tap delay values, the
predefined values will be used for the same.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
This bridge just needs to be configured based on
real phy negotiated speed and duplex.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
---
drivers/net/phy/Kconfig | 7 +++
drivers/net/phy/Makefile| 1 +
drivers/net/phy/phy.c
This patch moves fixed-link functionality code to a separate
routine inorder to make it more modular and cleaner.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
---
drivers/net/phy/phy.c | 34 +++---
1 file changed, 27 insertions(+), 7
This patch throws an error if 64-bit support is expected
but DMA hardware is not capable of 64-bit support. It also
prints a debug message if DMA is capable of 64-bit but not
using it.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
---
drivers/net/zynq_gem.c | 24
From: Vipul Kumar
This patch adds 64-bit addressing support for zynq gem.
This means it can perform send and receive operations on
64-bit address buffers.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
---
drivers/net/zynq_gem.c | 63
Hi Marek/Michal,
Can you please review and let me know if any comments otherwise, please take it
up.
Thanks,
Siva
> -Original Message-
> From: Siva Durga Prasad Paladugu [mailto:siva.durga.palad...@xilinx.com]
> Sent: Friday, September 07, 2018 4:27 PM
> To: u-boot@lists.
Hi Jagan,
Could you please take some time to look into this mail and let me now your
comments.
Thanks,
Siva
> -Original Message-
> From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Siva
> Durga Prasad Paladugu
> Sent: Wednesday, September 12, 2018 2:47 PM
Ping!
Thanks,
Siva
From: Siva Durga Prasad Paladugu
Sent: Friday, September 07, 2018 12:59 PM
To: 'u-boot@lists.denx.de'
Cc: Jagan Teki ; Michal Simek
Subject: QSPI driver for Zynq and ZynqMP
Hi Jagan,
We would like to upstream quad and dual modes(parallel and stacked) support
From: Vipul Kumar
Update the DWC3 USB driver to support a live tree.
Signed-off-by: Vipul Kumar
Signed-off-by: Siva Durga Prasad Paladugu
Tested-by: Michal Simek
---
Changes in v3:
- Used ofnode_valid() to check for node validity
This fixes the below compilation failure
for stih410
Hi Jagan,
We would like to upstream quad and dual modes(parallel and stacked) support for
qspi drivers of Zynq and ZynqMP. Can we send patches based on existing
framework(drivers/spi , this is what we are using on Xilinx tree) or you want
us to use any other?
I know we had discussion sometime b
Hi,
> -Original Message-
> From: Michal Simek [mailto:michal.si...@xilinx.com]
> Sent: Thursday, September 06, 2018 7:36 PM
> To: Siva Durga Prasad Paladugu ; u-
> b...@lists.denx.de
> Cc: Michal Simek ; ma...@denx.de;
> bmeng...@gmail.com; s...@chromiu
Hi,
> -Original Message-
> From: Marek Vasut [mailto:ma...@denx.de]
> Sent: Thursday, September 06, 2018 4:28 PM
> To: Siva Durga Prasad Paladugu ; u-
> b...@lists.denx.de
> Cc: Michal Simek ; bmeng...@gmail.com;
> s...@chromium.org; yamada.masah...@socionext.com; Vip
From: Vipul Kumar
Update the DWC3 USB driver to support a live tree.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Vipul Kumar
Tested-by: Michal Simek
---
Changes in v2:
- Fixed travis build issues with some platforms.
---
drivers/usb/common/common.c | 11
max-speed property is part of phynode and it has to be
read using ofnode_read_u32_default(). This fixes the issue
of incorrect max-speed read from DT.
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/net/zynq_gem.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a
Hi,
I have below queries on FAT filesystem support in uboot. It would be really
helpful if someone can provide some insight into these.
1. fatwrite command is not able to write into subdirectories, but able to
perform same ops on to root directory, its treating / as part of file name
whi
Hi Joe/Michal,
Can you please take it up if it is fine.
Thanks,
Siva
> -Original Message-
> From: Siva Durga Prasad Paladugu [mailto:siva.durga.palad...@xilinx.com]
> Sent: Monday, July 16, 2018 6:26 PM
> To: u-boot@lists.denx.de
> Cc: Michal Simek ; joe.her
Hi Heinrich/Rob,
Do we have any update on this issue.
Thanks,
Siva
> -Original Message-
> From: Vipul Kumar
> Sent: Monday, June 18, 2018 10:35 AM
> To: Heinrich Schuchardt ; u-boot@lists.denx.de
> Cc: Michal Simek ; Siva Durga Prasad Paladugu
> ; Rob Clark ; Ćukasz
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint of internal memory. This
configuration has only required qspi flash support and it
uses DCC as serial.
Signed-off-by: Siva Durga Prasad Paladugu
---
Chnages for v2:
- Fixed copyright year
- Fixed memory
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint of internal memory. This
configuration has only required qspi flash support and it
uses DCC as serial.
Signed-off-by: Siva Durga Prasad Paladugu
---
This patch is based on series
"[PATCH v6 0/5
This patch updates the zynq gem driver to support livetree.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Vipul Kumar
---
Changes for v2:
- Note that this patch is based on below two series.
https://patchwork.ozlabs.org/cover/936370/
and
https://patchwork.ozlabs.org/cover/936380
HI Joe,
> -Original Message-
> From: Siva Durga Prasad Paladugu
> Sent: Monday, July 16, 2018 2:32 PM
> To: 'joe.hershber...@ni.com' ; Grygorii Strashko
>
> Cc: u-boot ; Michal Simek ;
> Vipul Kumar
> Subject: RE: [U-Boot] [PATCH 3/3] net: zynq_gem: c
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint OCM memory. This configuration
only has required parallel nor flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v3:
- None, rebased on latest master
Changes from v2:
- None
Remove the SDRAM_BASE nad SDRAM_SIZE as it can now get these
details from DT.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v3:
- None
Changes from v2:
- None
Changes from v1:
- Removed commit reference from description as per comment
---
include/configs/zynq_cse.h | 3 ---
1
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint of memory. This configuration
has only required nand flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v3:
- Rebased on latest master
Changes from v2:
- None
Changes from v1
This patch renames the routine fdtdec_setup_memory_size()
to fdtdec_setup_mem_size_base() as it now fills the
mem base as well along with size.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v3:
- Separted the rename patch
---
arch/arm/mach-mvebu/arm64-common.c
This patch updates the ram_base to store the start address of
the first bank DRAM and the use this ram_base to calculate ram_top
properly. This patch fixes the erroneous calculation of ram_top
incase of non zero ram start address.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal
Hi Joe,
> -Original Message-
> From: Joe Hershberger [mailto:joe.hershber...@ni.com]
> Sent: Thursday, July 12, 2018 12:26 AM
> To: Siva Durga Prasad Paladugu ; Grygorii Strashko
>
> Cc: u-boot ; Joe Hershberger
> ; Michal Simek ; Vipul
> Kumar
> Subject: R
Hi Jagan,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Monday, July 16, 2018 2:00 PM
> To: Siva Durga Prasad Paladugu
> Cc: U-Boot Mailing List ; Michal Simek
>
> Subject: Re: [U-Boot] [PATCH v7 1/2] spi: zynqmp_gqspi: Add supp
Hi,
> -Original Message-
> From: Siva Durga Prasad Paladugu
> Sent: Tuesday, July 10, 2018 9:32 AM
> To: Grygorii Strashko ; u-boot@lists.denx.de
> Cc: joe.hershber...@ni.com; Michal Simek
> Subject: RE: [U-Boot] [PATCH 1/3] net: phy: ti: Modify to suppor
Hi,
> -Original Message-
> From: Grygorii Strashko [mailto:grygorii.stras...@ti.com]
> Sent: Monday, July 09, 2018 10:51 PM
> To: Siva Durga Prasad Paladugu ; u-
> b...@lists.denx.de
> Cc: joe.hershber...@ni.com; Michal Simek
> Subject: Re: [U-Boot] [PATCH 1/3] ne
This patch updates the zynq gem driver to support
livetree.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Vipul Kumar
---
drivers/net/zynq_gem.c | 29 ++---
1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/net/zynq_gem.c b/drivers/net
This patch adds support for livetree by using
dev_.. calls instead of fdtdec_..
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/net/phy/ti.c | 16 +++-
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
index 8f3ed8a
This patch adds support for livetree by using dev_..
calls instead of fdtdec_.. .
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/net/phy/xilinx_phy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/xilinx_phy.c b/drivers/net/phy/xilinx_phy.c
index
This patch adds qspi driver support for ZynqMP SoC. This
driver is responsible for communicating with qspi flash
devices.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v7:
- Removed reading of mode, clock phase and polarity from ofdata_to_platdata
as drivercan get from spi-uclass
This patch adds qspi driver support for all ZynqMP ZCU102
boards.
Signed-off-by: Siva Durga Prasad Paladugu
Acked-by: Michal Simek
---
Changes for v7:
- Added "spi-flash" to compatible strings.
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
-
This patch adds qspi driver support for all ZynqMP ZCU102
boards.
Signed-off-by: Siva Durga Prasad Paladugu
Acked-by: Michal Simek
---
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- Changed as per latest changes in 1/2
Changes for v2:
- Rebased on top
This patch adds qspi driver support for ZynqMP SoC. This
driver is responsible for communicating with qspi flash
devices.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v6:
- Removed spi_flash.h inclusion and other unused macros
- Fixed coding style comments
- Removed tx_rx_mode in
Hi Jagan,
> -Original Message-
> From: Jagan Teki [mailto:ja...@amarulasolutions.com]
> Sent: Wednesday, June 27, 2018 12:52 PM
> To: Siva Durga Prasad Paladugu
> Cc: U-Boot-Denx ; Jagan Teki
> ; Michal Simek
> Subject: Re: [U-Boot] [PATCH v5 1/2] spi: zynqmp_g
encrypted
image back to DDR as per destination address. The image has
to be encrypted using xilinx bootgen tool and to get only the
encrypted image from tool use -split option while invoking
bootgen.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v4:
- Moved license to top
This patch adds qspi driver support for ZynqMP SoC. This
driver is responsible for communicating with qspi flash
devices.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changed for v5:
- Removed zynqm_gqspi.h file which was added
by mistake.
Changes for v4:
- Moved macro definitions back to .c
This patch adds qspi driver support for all ZynqMP ZCU102
boards.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- Changed as per latest changes in 1/2
Changes for v2:
- Rebased on top of latest master and enabled qspi for
all
This patch adds qspi driver support for all ZynqMP ZCU102
boards.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v4:
- None
Changes for v3:
- Changed as per latest changes in 1/2
Changes for v2:
- Rebased on top of latest master and enabled qspi for
all zcu102 boards.
---
configs
This patch adds qspi driver support for ZynqMP SoC. This
driver is responsible for communicating with qspi flash
devices.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v4:
- Moved macro definitions back to .c
- Removed last_cmd and flash command checks in driver
- Used macros and
Hi Stefan,
> -Original Message-
> From: ste...@herbrechtsmeier.net [mailto:ste...@herbrechtsmeier.net]
> Sent: Friday, June 08, 2018 5:29 PM
> To: Siva Durga Prasad Paladugu
> Cc: Stefan Herbrechtsmeier ;
> u-boot@lists.denx.de; Michal Simek ;
> mon...@monstr.eu
Hi Stefan,
Yes, I checked and it looks fine functionally, I even tested it. Otherthan
this, I have few comments on this which I am going to reply to your RFC patch
mail.
Thanks,
Siva
> -Original Message-
> From: Siva Durga Prasad Paladugu
> Sent: Tuesday, June 12, 2018 9:1
encrypted
image back to DDR as per destination address. The image has
to be encrypted using xilinx bootgen tool and to get only the
encrypted image from tool use -split option while invoking
bootgen.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v3:
- Removed aesload and
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint OCM memory. This configuration
only has required parallel nor flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v2:
- None
Changes from v1:
- None
---
arch/arm/dts/Makefile
Remove the SDRAM_BASE nad SDRAM_SIZE as it can now get these
details from DT.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v2:
- None
Changes from v1:
- Removed commit reference from description as per comment
---
include/configs/zynq_cse.h | 3 ---
1 file changed, 3 deletions
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint of memory. This configuration
has only required nand flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v2:
- None
Changes from v1:
- Update memory node as per comment
- Removed
fdtdec_setup_memory_size() to
fdtdec_setup_mem_size_start() as this routine now takes care
of memory size and start.
Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek
---
Changes from v2:
- Used new varibale ram_start
- Rename fdtdec_setup_memory_size
Changes from v1:
- None
---
arch/arm
Hi Simon,
> -Original Message-
> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass
> Sent: Saturday, June 09, 2018 3:29 AM
> To: Michal Simek
> Cc: Siva Durga Prasad Paladugu ; U-Boot Mailing List
> ; Tom Rini
> Subject: Re: [PATCH 1/4] lib:
IT on both these.
I will talk to Michal, if he can send this patch on my behalf till my
e-mail issue got resolved
Thanks,
Siva
On Tue, Jun 12, 2018 at 5:57 PM, Masahiro Yamada <
yamada.masah...@socionext.com> wrote:
> 2018-06-12 21:00 GMT+09:00 Siva Durga Prasad Paladugu
> :
> > Thi
This patch fixes the mmc tuning command failures
when tuning pattern data needs to read back for
comparision against the excpected bit pattern.
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/mmc/sdhci.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers
_AVAIL;
if (!(cmd->resp_type & MMC_RSP_PRESENT))
Thanks,
Siva
> -Original Message-
> From: Michal Simek [mailto:michal.si...@xilinx.com]
> Sent: Tuesday, June 12, 2018 2:34 PM
> To: Masahiro Yamada ; Siva Durga
> Prasad Paladugu ; Michal Simek
> ; U-Boot
Hi Stefan,
> -Original Message-
> From: stefan.herbrechtsme...@weidmueller.com
> [mailto:stefan.herbrechtsme...@weidmueller.com]
> Sent: Monday, June 11, 2018 9:33 PM
> To: Siva Durga Prasad Paladugu ;
> ste...@herbrechtsmeier.net
> Cc: u-boot@lists.denx.de; michal.
Durga Prasad Paladugu
---
Changes from v2:
- Created separate commands for zynq aesload and aesloadp
as per comment
- Fixed all other coding style comments
Changes from v1:
- Defined two config synbols for RSA and AES separately
and used them wherever required.
- Used U_BOOT_CMD_KENT as per
net]
> Sent: Friday, June 08, 2018 5:29 PM
> To: Siva Durga Prasad Paladugu
> Cc: Stefan Herbrechtsmeier ;
> u-boot@lists.denx.de; Michal Simek ;
> mon...@monstr.eu
> Subject: [RFC PATCH] fpga: zynq: Add encrypted bitstream support with
> auto detect
>
> From: Stefan
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint of memory. This configuration
has only required nand flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v1:
- Update memory node as per comment
- Removed intc and fclk as per
Remove the SDRAM_BASE nad SDRAM_SIZE as it can now get these
details from DT.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v1:
- Removed commit reference from description as per comment
---
include/configs/zynq_cse.h | 3 ---
1 file changed, 3 deletions(-)
diff --git a/include
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint OCM memory. This configuration
only has required parallel nor flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v1:
- None
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts
Fill initial ram top with DDR base addr value from DT as not filling
it here always assumes it as zero while calculating relocation
offset and hence lead to failures in somecases. This will assumed
as zero if CONFIG_SYS_SDRAM_BASE is not defined.
Signed-off-by: Siva Durga Prasad Paladugu
Signed
Durga Prasad Paladugu
---
Changes from v1:
- Defined two config synbols for RSA and AES separately
and used them wherever required.
- Used U_BOOT_CMD_KENT as per comment
- Cleared DEVCFG_CTRL_PCAP_RATE_EN_MASK once decryption is
done.
Changes from RFC:
- Moved zynqaes to board/xilinx/zynq/cmds.c
CONFIG_MMC_SDHCI_ZYNQ through defconfig.
Signed-off-by: Siva Durga Prasad Paladugu
---
arch/arm/dts/Makefile | 4 +-
...{zynqmp-mini-emmc.dts => zynqmp-mini-emmc0.dts} | 20 ++-
arch/arm/dts/zynqmp-mini-emmc1.dts | 67 ++
...efcon
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint OCM memory. This configuration
only has required parallel nor flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/zynq-cse-nor.dts | 88
Remove the SDRAM_BASE nad SDRAM_SIZE as it can now get these
details from DT using 'commit 327f66622391
("lib: fdtdec: Fill initial ram top with DDR start value from dt")'
Signed-off-by: Siva Durga Prasad Paladugu
---
include/configs/zynq_cse.h | 3 ---
1 file changed,
Add configuration files/dtses for mini u-boot configuration
which runs on smaller footprint of memory. This configuration
has only required nand flash support.
Signed-off-by: Siva Durga Prasad Paladugu
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/zynq-cse-nand.dts | 90
Fill initial ram top with DDR base addr value from DT as not filling
it here always assumes it as zero while calculating relocation
offset and hence lead to failures in somecases. This will assumed
as zero if CONFIG_SYS_SDRAM_BASE is not defined.
Signed-off-by: Siva Durga Prasad Paladugu
Signed
Hi Stefan,
> -Original Message-
> From: Stefan Herbrechtsmeier [mailto:ste...@herbrechtsmeier.net]
> Sent: Thursday, May 31, 2018 10:57 PM
> To: Siva Durga Prasad Paladugu ; u-
> b...@lists.denx.de
> Cc: michal.si...@xilinx.com
> Subject: Re: [U-Boot] [PATCH] xilinx:
Hi Stefan,
> -Original Message-
> From: Stefan Herbrechtsmeier [mailto:ste...@herbrechtsmeier.net]
> Sent: Thursday, May 31, 2018 3:43 PM
> To: Siva Durga Prasad Paladugu ; u-
> b...@lists.denx.de
> Cc: michal.si...@xilinx.com
> Subject: Re: [U-Boot] [PATCH] xilinx:
This patch adds support for loading secure bitstreams on ZynqMP
platforms. The secure bitstream images has to be generated using
Xilinx bootgen tool.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v2:
- None
---
arch/arm/include/asm/arch-zynqmp/sys_proto.h | 6
configs
Durga Prasad Paladugu
---
Changes for v2:
- Correct the argc check as per comment.
---
cmd/fpga.c | 31 +++
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 14ad4e5..3f09d42 100644
--- a/cmd/fpga.c
+++ b/cmd/fpga.c
@@ -60,15
authenticated and device key
encrypted bitstream is as follows
"fpga loads 0 10 200 0 1"
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v2:
- None
---
cmd/Kconfig | 7 ++
cmd/fpga.c | 62 -
dr
Durga Prasad Paladugu
---
Changes from RFC:
- Moved zynqaes to board/xilinx/zynq/cmds.c and renamed as
"zynq aes".
- Moved boot image parsing code to a separate file.
- Squashed in to a single patch.
- Fixed coding style comments.
---
arch/arm/Kconfig | 1 +
board/xilinx/zy
Hi,
> -Original Message-
> From: Michal Simek [mailto:michal.si...@xilinx.com]
> Sent: Thursday, May 31, 2018 11:29 AM
> To: Siva Durga Prasad Paladugu ; u-
> b...@lists.denx.de
> Cc: michal.si...@xilinx.com
> Subject: Re: [PATCH 2/3] cmd: fpga: Add support to l
Hi,
> -Original Message-
> From: Michal Simek [mailto:michal.si...@xilinx.com]
> Sent: Wednesday, May 30, 2018 8:37 PM
> To: Siva Durga Prasad Paladugu ; u-
> b...@lists.denx.de
> Cc: michal.si...@xilinx.com
> Subject: Re: [PATCH 1/3] cmd: fpga: Reorder the arguments
This patch updates sdhci_send_command() to handle MMC
HS200 tuning command.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v1:
- Fixed spacings as per comment
---
drivers/mmc/sdhci.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/sdhci.c b
This patch adds HS200 suuport for ZynqMP and enables
the same for ZC1751 DC1 board which has eMMC on it.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes from v1:
- Fixed coding style as per comment
---
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 +
drivers/mmc/zynq_sdhci.c
This patch adds support for loading secure bitstreams on ZynqMP
platforms. The secure bitstream images has to be generated using
Xilinx bootgen tool.
Signed-off-by: Siva Durga Prasad Paladugu
---
arch/arm/include/asm/arch-zynqmp/sys_proto.h | 6
configs
authenticated and device key
encrypted bitstream is as follows
"fpga loads 0 10 200 0 1"
Signed-off-by: Siva Durga Prasad Paladugu
---
cmd/Kconfig | 7 ++
cmd/fpga.c | 62 -
drivers/fpga/f
Durga Prasad Paladugu
---
cmd/fpga.c | 31 +++
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/cmd/fpga.c b/cmd/fpga.c
index 14ad4e5..0981826 100644
--- a/cmd/fpga.c
+++ b/cmd/fpga.c
@@ -60,15 +60,31 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc
Hi,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Tuesday, May 29, 2018 10:22 AM
> To: Marek Vasut ; Siva Durga Prasad Paladugu
>
> Cc: U-Boot Mailing List ; Tom Rini
>
> Subject: Re: [U-Boot] [PATCH] sf: Enable FSR polling o
This patch updates sdhci_send_command() to handle MMC
HS200 tuning command.
Signed-off-by: Siva Durga Prasad Paladugu
---
drivers/mmc/sdhci.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 400f87e..1bbcf4b 100644
This patch adds HS200 suuport for ZynqMP and enables
the same for ZC1751 DC1 board which has eMMC on it.
Signed-off-by: Siva Durga Prasad Paladugu
---
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 +
drivers/mmc/zynq_sdhci.c | 25
2 files
Hi,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Wednesday, May 09, 2018 4:47 PM
> To: Siva Durga Prasad Paladugu
> Cc: Jagan Teki ; U-Boot-Denx b...@lists.denx.de>; michal.si...@xilinx.com
> Subject: Re: [U-Boot] [PATCH v3 1
Hi Jagan,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Wednesday, May 09, 2018 4:18 PM
> To: Siva Durga Prasad Paladugu
> Cc: Jagan Teki ; U-Boot-Denx b...@lists.denx.de>; michal.si...@xilinx.com
> Subject: Re: [U-Boo
Hi Jagan,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Wednesday, May 09, 2018 1:22 PM
> To: Siva Durga Prasad Paladugu
> Cc: Jagan Teki ; U-Boot-Denx b...@lists.denx.de>; michal.si...@xilinx.com
> Subject: Re: [U-Boo
Hi,
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Wednesday, May 09, 2018 1:12 PM
> To: Siva Durga Prasad Paladugu
> Cc: Jagan Teki ; U-Boot-Denx b...@lists.denx.de>; michal.si...@xilinx.com
> Subject: Re: [U-Boot] [PATCH v3 1
Hi Jagan,
> -Original Message-
> From: Jagan Teki [mailto:ja...@amarulasolutions.com]
> Sent: Wednesday, May 09, 2018 12:01 PM
> To: Siva Durga Prasad Paladugu
> Cc: U-Boot-Denx ; michal.si...@xilinx.com
> Subject: Re: [PATCH v3 1/2] spi: zynqmp_gqspi: Add support
This patch adds qspi driver support for ZynqMP SoC. This
driver is responsible for communicating with qspi flash
devices.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v3:
- Renamed all macros, functions, files and configs as per comment
- Used wait_for_bit wherever required
This patch adds qspi driver support for all ZynqMP ZCU102
boards.
Signed-off-by: Siva Durga Prasad Paladugu
---
Changes for v3:
- Changed as per latest changes in 1/2
Changes for v2:
- Rebased on top of latest master and enabled qspi for
all zcu102 boards.
---
configs
1 - 100 of 375 matches
Mail list logo