> From: Marcel Ziswiler
> Remove vendor pre-fix fsl, from uart-has-rtscts property.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX
> From: Marcel Ziswiler
> Add GPIO1_IO03__OSC32K_32K_OUT pin muxing.
> While at it also fix indentation of pinfunc header file.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> This function will be used by i.MX8 fuse driver.
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB
> This converts the following to Kconfig:
>CONFIG_USB_EHCI_MX5
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing
> From: Philippe Schenker
> Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
> SOC to request for a lower voltage during sleep. This is necessary
> because the voltage is changing too slow for the SOC to wake up
> properly.
> Signed-off-by: Philippe Schenker
> Acked-by: Marcel
> According to IMX8QXP/8QM config option, choose the clk/iomuxc
> compatible.
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing
> Add fuse write for i.MX8
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
> 1. Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
> partition. This fixes the issue, when MMC controllers are probed in
> a different order in U-boot and Linux kernel.
> 2. Fix legacy USB command (both sdboot and usbboot can be used now).
> Tested-by: Marcel Ziswiler
>
> As EHCI on i.MX5 has been converted to driver model, the board specific
> code, necessary for VBUS USB power supply setup is not needed anymore.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> The CONFIG_FSL_ESDHC is now enabled and defined in Kconfig, not in
> include/configs/kp_imx53.h
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software
> After DM conversion, the size of U-Boot binary to increase.
> Previous size is 480K after DM Conversion the new size is 557K
> So it's necessary to increase the dfu request for store u-boot-dtb.img in
> eMMC.
> Signed-off-by: Joris Offouga
Applied to u-boot-imx, master, thanks !
Best
> From: Marcel Ziswiler
> Migrate pinctrl and regulators to device tree resp. driver model:
> Ethernet, NAND and UART.
> Drop BOARD_EARLY_INIT_F as it is anyway no longer used.
> Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED.
> While at it also update copyright period.
>
> From: Stefan Agner
> Currently $loadaddr and $fdt_addr_r point to the same address. This
> might be not ideal for some distro boot scripts which make use of
> $loadaddr after loading the device tree.
> Make sure the two variables point to two different addresses. Moving
> $loadaddr is not
> From: Marcel Ziswiler
> Remove duplicate function declarations from the SCFW API header file.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Peng Fan
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> From: Marcel Ziswiler
> Add all the latest new SKUs:
> - Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT
> - Apalis iMX8 QuadMax 4GB IT
> - Apalis iMX8 QuadPlus 2GB Wi-Fi / BT
> - Apalis iMX8 QuadPlus 2GB",
> - Colibri iMX8 QuadXPlus 2GB IT
> - Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth
> - Colibri iMX8
> This commit enables the DM_USB on HSC|DDC i.MX53 based boards.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing
> From: Marcel Ziswiler
> Drop disabling SPL_SYS_THUMB_BUILD as we anyway do not use SPL.
> Enbale CRC32 verify, USB SDP and EFI loader support.
> Drop CMD_GPT and disabling RANDOM_UUID.
> Do savedefconfig which drops USB_FUNCTION_SDP.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
> After switching to DM/DTS support of esdhc3 - the code in this patch
> can be removed.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering
> This code has been ported from Linux kernel - tag v5.1-rc2.
> The difference from the kernel is the removal of:
> fsl,usbmisc = < 1>;
> fsl,usbphy = <>;
> properties, which are not needed for correct u-boot operation (as PHY
> setup is done in ehci-mx5.c file itself).
> Signed-off-by: Lukasz
> From: Stefan Agner
> Use CONFIG_TARGET_... at compile time to differentiate between
> Apalis iMX6, Colibri iMX6 and Colibri iMX6ULL. Avoid code
> duplication by moving question about Wi-Fi / Bluetooth before
> IT/non-IT decision.
> Signed-off-by: Stefan Agner
> Acked-by: Marcel Ziswiler
>
> From: Marcel Ziswiler
> Fix compatible node to use regular Toradex notation.
> Annotate device tree with standard Colibri pin muxing comments.
> Use open-drain I2C pin muxings.
> Alphabetically re-order iomuxc nodes.
> Rename snvs-ad7879-int-grp touch interrupt node as per Linux device tree.
>
> From: Marcel Ziswiler
> Clean-up handling of several SKUs.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering
> This setup is a bit special as Linux kernel (4.19) is not supporting
> in-kernel NFS rootfs mount and Distributed Switch Architecture (DSA)
> operation.
> For that reason it was necessary to provide a bootarg to allow userspace
> enable it afterwards if needed.
> Signed-off-by: Lukasz Majewski
> Add i.MX8QM clocks definition
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich,
> Add i.MX8QM pads definition
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
> In this commit the esdhc3 controller is enabled as well as it is remaped
> to mmc0 to not break legacy code.
> The pinctrl setup (e.g. 0x1e4) is the same as one from in-board file
> definition.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano
> This patch imports the Linux kernel base board imx7d-pico.dtsi,
> pi board imx7d-pico-pi.dts and hobbit board imx7d-pico-hobbit.dts
> from Linux v5.1-rc1.
> Signed-off-by: Joris Offouga
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> From: Ye Li
> On mx7ulp B0, beside bank 0 and 1, the fuse bank 9, 10, 28 are changed to
> Redundancy mode not ECC, so they can support to program different bits of
> a word in multiple times.
> Signed-off-by: Ye Li
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best
> From: Marcel Ziswiler
> Migrate MMC to using driver model.
> Migrate USDHC to using pinctrl.
> While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing.
> While at it also update copyright period.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master,
> This commit switches to DM USB for warp7 and warp7_bl33 defconfigs.
> Signed-off-by: Pierre-Jean Texier
> Signed-off-by: Joris Offouga
> Reviewed-by: Fabio Estevam
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> This patch is necessary for convert this board to dm driver model
> DM GPIO requires gpio_request() to be called explicitly before
> doing any gpio operation
> Signed-off-by: Joris Offouga
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> This commit enables DM_MMC and DM_BLK on imx53 based HSC and DDC boards.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH,
> From: Marcel Ziswiler
> Just give the new Ethernet PHY power save mode circuitry time to settle.
> Signed-off-by: Marcel Ziswiler
> Acked-by: Max Krummenacher
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> Add i.MX8QM compatible
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office:
> After i.MX5's EHCI conversion to DM, the CONFIG_MXC_USB_PORT is not needed
> anymore and should be removed.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX
> This commit converts i.MX5's EHCI USB host driver to driver model (DM_USB).
> It is a straightforward conversion (to reuse as much code as possible),
> based on ehci-mx6.c code.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs.
> Signed-off-by: Pierre-Jean Texier
> Signed-off-by: Joris Offouga
> Reviewed-by: Fabio Estevam
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> This patch adds DT file hooks for Pico i.MX7D SOM and variant boards
> Signed-off-by: Joris Offouga
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing
> From: Gerard Salvatella
> Add support for new Colibri iMX6ULL SKUs.
> While at it also checkpatch fix the whole files.
> Signed-off-by: Gerard Salvatella
> Acked-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> From: Marcel Ziswiler
> Migrate Ethernet FEC to using driver model.
> Drop PHY_MICREL_KSZ90X1 which slipped in from Apalis iMX6.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> From: Marcel Ziswiler
> Re-synced the device tree with Linux 5.0.
> This fixes the following warnings:
> w+arch/arm/dts/imx6-apalis.dtb: Warning (reg_format): /soc/ipu@280/
> port@2/endpoint@0:reg: property has invalid length (4 bytes)
> (#address-cells == 2, #size-cells == 1)
>
> From: Ye Li
> On iMX8MQ Rev B1, reading from fuse box is not allowed. The
> OCOTP_READ_FUSE_DATA register is tied to magic number 0xff0055aa
> for chip rev. So u-boot has to disable the fuse sense function for it.
> Signed-off-by: Ye Li
> Tested-by: Anson Huang
> Signed-off-by: Peng Fan
> Add i.MX8QM MEK board support.
> Included a basic dts, enabled SPL FIT
> Boot log as below:
> U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
> Normal Boot
> Trying to boot from MMC2_2
> U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800)
> CPU: NXP
> From: Marcel Ziswiler
> Fix indentation using tab vs. spaces.
> Signed-off-by: Marcel Ziswiler
> Reviewed-by: Igor Opaniuk
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering
> Enable CMD_FUSE for i.MX8QXP MEK
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich,
> Add cpu type and Kconfig entry
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich,
> This commit enables the support for K's HSC|DDC imx53 based boards.
> It was also necessary to provide device tree description for regulators
> to avoid board specific code definition.
> The GPIO pin description responsible for VBUS control has been moved from
> "hog" group to usbh1 dedicated
> From: Ludwig Zenz
> The four x16 DDR3 are wired in T-topology. From NXP AN4467:
> 'Although not required, T-Topologies may also benefit from performing
> Write Leveling as there are package delays on both the processor and DDR
> devices that can be de-skewed by performing Write Leveling.
> Add i.MX8QM clk driver, SDHC/FEC/UART/I2C supported.
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> After commit efd0b791069a ("eth: dm: fec: Add gpio phy reset binding")
> the in-board file definition of ETH PHY reset can be removed.
> Signed-off-by: Lukasz Majewski
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
> The existing calibration values were found to be incorrect
> in comparison to newly determined values.
> The new values were generated with the help of 5 boards. They have
> been determined with the NXP Utility 'DDR Stress Test (2.9.0)'.
> Signed-off-by: Ludwig Zenz
Applied to u-boot-imx,
Am 24.04.2019 um 15:55 schrieb Linder Pascal:
Hello everyone,
I want to add some supplementary security to my embedded system. The Flattened
Image Tree (FIT) to secure the operating system and the device tree, I have
already found. Now, I am wondering if I could also secure U-Boot itself
Hello everyone,
I want to add some supplementary security to my embedded system. The Flattened
Image Tree (FIT) to secure the operating system and the device tree, I have
already found. Now, I am wondering if I could also secure U-Boot itself before
starting it by the Secondary Program Loader
On Wed, Mar 20, 2019 at 03:32:39PM +0800, Shawn Guo wrote:
> It adds a Driver Model compatible reset driver for HiSlicon platform.
> The driver implements a custom .of_xlate function, and uses .data field
> as reset register offset and .id field as bit shift.
>
> Signed-off-by: Shawn Guo
>
On Fri, Mar 22, 2019 at 05:02:04PM +0100, Philippe Reynes wrote:
> Enable the led support in the configuration
> of the board bcm968580xref.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sun, Mar 24, 2019 at 04:46:37PM +0100, Fabien Parent wrote:
> Add Pinctrl driver for MediaTek MT8516 SoC.
>
> Signed-off-by: Fabien Parent
> Acked-by: Ryder Lee
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sun, Mar 24, 2019 at 04:46:33PM +0100, Fabien Parent wrote:
> Add config for handling MT8516 SoC.
>
> Signed-off-by: Fabien Parent
> Acked-by: Ryder Lee
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Fri, Mar 15, 2019 at 03:14:38PM +0100, Philippe Reynes wrote:
> The option write-protect may only change on the kernel command line,
> we add a property in the device tree to be more flexible.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
On Sun, Mar 24, 2019 at 04:46:38PM +0100, Fabien Parent wrote:
> Add support for MediaTek MT8516 SoC. This include the file
> that will initialize the SoC after boot and its device tree.
>
> Signed-off-by: Fabien Parent
> Reviewed-by: Tom Rini
Applied to u-boot/master, thanks!
--
Tom
On Mon, Apr 01, 2019 at 10:01:50PM +0200, Simon Goldschmidt wrote:
> Convert debug output from '%#lx' to '0x%lx' to be compatible with tiny
> printf used in SPL.
>
> Signed-off-by: Simon Goldschmidt
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 15, 2019 at 03:14:44PM +0100, Philippe Reynes wrote:
> Enable the nand support (driver and command)
> in the configuration of the board bcm968580xref.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Apr 08, 2019 at 05:35:28PM +0200, Eugeniu Rosca wrote:
> Fix below CP warning triggered by the 'iminfo' output in another patch:
> WARNING: 'addrress' may be misspelled - perhaps 'address'?
>
> Fixes: 4f1318b29c7a20 ("common: image: minimal android image iminfo support")
> Signed-off-by:
On Fri, Mar 22, 2019 at 05:02:05PM +0100, Philippe Reynes wrote:
> Allow the led bcm6858 driver to be used on bcm63158.
> They have the same led controller.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 22, 2019 at 05:02:06PM +0100, Philippe Reynes wrote:
> Add the led controller in the bcm63158 device tree.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot
On Thu, Apr 04, 2019 at 02:38:50PM +0200, Lars Povlsen wrote:
> This fixes relaction isses with the PSCI_TABLE entries in
> the psci_32_table and psci_64_table.
>
> When using 32-bit adress pointers relocation was not being applied to
> the tables, causing PSCI handlers to point to the
On Fri, Mar 22, 2019 at 05:02:08PM +0100, Philippe Reynes wrote:
> Enable the led support in the configuration
> of the board bcm963158.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 22, 2019 at 05:02:03PM +0100, Philippe Reynes wrote:
> Enable the led controller in the device tree
> of the board bcm968580xref.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 15, 2019 at 03:14:35PM +0100, Philippe Reynes wrote:
> This patch port the file include/linux/completion.h
> from linux 4.18 to u-boot. It define the structure
> but all the function are stubbed.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
On Sun, Apr 07, 2019 at 05:57:40PM +0200, Heinrich Schuchardt wrote:
> If CONFIG_UNIT_TEST is enabled we should enable the individual tests by
> default to ensure good test coverage.
>
> Signed-off-by: Heinrich Schuchardt
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description:
On Sun, Mar 24, 2019 at 04:46:36PM +0100, Fabien Parent wrote:
> Add clock driver for MediaTek MT8516 SoC.
>
> Signed-off-by: Fabien Parent
> Acked-by: Ryder Lee
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sun, Mar 24, 2019 at 04:46:32PM +0100, Fabien Parent wrote:
> Some MediaTek SoC need an additional clock "source_cg". Enable
> this new clock. We reuse the same clock name as in the kernel.
>
> Signed-off-by: Fabien Parent
> Acked-by: Ryder Lee
Applied to u-boot/master, thanks!
--
Tom
On Fri, Mar 22, 2019 at 05:02:07PM +0100, Philippe Reynes wrote:
> Enable the led controller in the device tree
> of the board bcm963158.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Mon, Apr 08, 2019 at 05:35:27PM +0200, Eugeniu Rosca wrote:
> According to Android image format [1], kernel image resides at 1 page
> offset from the boot image address. Grab the magic number from there
> and allow U-Boot to handle LZ4-compressed KNL binaries instead of
> hardcoding
On Fri, Mar 15, 2019 at 04:32:33PM +0100, Thierry Reding wrote:
> From: Thierry Reding
>
> If a platform defines CONFIG_NR_DRAM_BANKS, each DRAM bank will be added
> as a PCI region. The number of MAX_PCI_REGIONS therefore needs to scale
> with the number of DRAM banks, otherwise we will end up
On Tue, Mar 26, 2019 at 01:04:00PM +0100, Stefan Roese wrote:
> This patch adds a short message to the SPL NAND loader, which displays
> the source and destinations addresses including the size of the
> loaded image, like this:
>
> U-Boot SPL 2019.04-rc3-00113-g486efd8aaf (Mar 15 2019 - 14:18:02
On Fri, Mar 22, 2019 at 05:02:01PM +0100, Philippe Reynes wrote:
> The driver add the support of the led IP on bcm6858.
> This led IP can drive up to 32 leds, and can handle
> blinking.
>
> Signed-off-by: Philippe Reynes
> Reviewed-by: Daniel Schwierzeck
Applied to u-boot/master, thanks!
--
On Fri, Mar 15, 2019 at 03:14:46PM +0100, Philippe Reynes wrote:
> Enable the nand controller in the device tree
> of the board bcm963158.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sun, Mar 24, 2019 at 04:46:34PM +0100, Fabien Parent wrote:
> We either need to use IS_ENABLED(CONFIG_FOO) or CONFIG_IS_ENABLED(FOO).
> IS_ENABLE(FOO) will always return false.
>
> This commit fixes the comparison by using the CONFIG_IS_ENABLED(FOO)
> syntax.
>
> Signed-off-by: Fabien Parent
On Fri, Mar 15, 2019 at 03:14:43PM +0100, Philippe Reynes wrote:
> Enable the nand controller in the device tree
> of the board bcm968580xref.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Mar 20, 2019 at 03:32:38PM +0800, Shawn Guo wrote:
> Some reset controllers support different polarities for reset operation,
> so let's add a polarity field into struct reset_ctl.
>
> Signed-off-by: Shawn Guo
> Acked-by: Joe Hershberger
Applied to u-boot/master, thanks!
--
Tom
On Fri, Mar 22, 2019 at 05:02:02PM +0100, Philippe Reynes wrote:
> Add the led controller in the bcm6858 device tree.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot
On Fri, Mar 15, 2019 at 03:14:34PM +0100, Philippe Reynes wrote:
> The macro devm_ioremap is only defined for configuration
> that doesn't have ioremap. But this macro may also be
> defined on configuration with ioremap.
> This patch remove the condition for the macro devm_ioremap,
> so it's
On Fri, Mar 15, 2019 at 03:14:37PM +0100, Philippe Reynes wrote:
> The parameter page isn't always in big endian, so we add
> an option to choose the endiannes of the parameter page.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP
On Fri, Mar 15, 2019 at 03:14:41PM +0100, Philippe Reynes wrote:
> Enable the nand support (driver and command)
> in the configuration of the board bcm96838gerg.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Wed, Mar 20, 2019 at 03:32:40PM +0800, Shawn Guo wrote:
> It adds the driver for HIGMACV300 Ethernet controller found on HiSilicon
> SoCs like Hi3798CV200. It's based on a downstream U-Boot driver, but
> quite a lot of code gets rewritten and cleaned up to adopt driver model
> and PHY API.
>
On Fri, Mar 15, 2019 at 03:14:47PM +0100, Philippe Reynes wrote:
> Enable the nand support (driver and command)
> in the configuration of the board bcm963158.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sun, Mar 24, 2019 at 04:46:35PM +0100, Fabien Parent wrote:
> Add the implementation for the CLK_GATE_SETCLR_INV and
> CLK_GATE_NO_SETCLR flags.
>
> Signed-off-by: Fabien Parent
> Acked-by: Ryder Lee
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 15, 2019 at 12:18:41PM +, Ibai Erkiaga wrote:
> Current relocation code is limited to 21bit PC-relative addressing
> which might not be enough for bigger code sizes. The following patch
> increases the addressing to 32bit PC-relative. This feature is
> specially interesting if
On Fri, Mar 15, 2019 at 03:14:31PM +0100, Philippe Reynes wrote:
> From: Marc Gonzalez
>
> Linux commit d45bc58dd3b ("mtd: nand: import nand_hw_control_init()")
>
> The code to initialize a struct nand_hw_control is duplicated across
> several drivers. Factorize it using an inline function.
>
On Fri, Mar 15, 2019 at 03:14:33PM +0100, Philippe Reynes wrote:
> This patch port the function readX_relaxed and
> writeX_relaxed from kernel 4.18.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 15, 2019 at 03:14:45PM +0100, Philippe Reynes wrote:
> Add the nand controller in the bcm63158 device tree.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
On Fri, Mar 15, 2019 at 03:14:32PM +0100, Philippe Reynes wrote:
> From: Boris Brezillon
>
> Linux commit 97d90da8a88 ("mtd: nand: provide several helpers
> to do common NAND operations")
>
> This is part of the process of removing direct calls to ->cmdfunc()
> outside of the core in order to
On Fri, Mar 15, 2019 at 03:14:42PM +0100, Philippe Reynes wrote:
> Add the nand controller in the bcm6858 device tree.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot
On Wed, Mar 20, 2019 at 03:32:41PM +0800, Shawn Guo wrote:
> The 'phy' reset of gmac device in kernel device tree is not generic
> enough for u-boot to use, so we need to overwrite the 'resets' property
> as needed. With this device tree fixup and poplar_defconfig changes,
> Ethernet starts
On Fri, Mar 15, 2019 at 03:14:39PM +0100, Philippe Reynes wrote:
> Add the nand controller in the bcm6838 device tree.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
___
U-Boot
On Fri, Mar 15, 2019 at 03:14:36PM +0100, Philippe Reynes wrote:
> The driver brcmnand come from linux kernel 4.18.
> Only SoC bcm6838 and bcm6858 are supported.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 15, 2019 at 03:14:40PM +0100, Philippe Reynes wrote:
> Enable the nand controller in the device tree
> of the board bcm96838gerg.
>
> Signed-off-by: Philippe Reynes
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Mar 15, 2019 at 04:32:32PM +0100, Thierry Reding wrote:
> From: Thierry Reding
>
> Make sure that we don't overflow the hose->regions array, otherwise we
> would end up overwriting the hose->region_count field and cause mayhem
> to ensue. Also print an error message when we'd be
On Wed, Mar 13, 2019 at 09:46:45AM +0100, Stefano Babic wrote:
> The initial environment is linked to the u-boot binary. Modifying the
> environment from User Space with the env tools requires that the tools
> are always built together with the bootloader to be sure that they
> contain the
On Tue, Mar 05, 2019 at 11:29:38PM +0800, tien.fong.c...@intel.com wrote:
> From: Tien Fong Chee
>
> In previously label which will be expanded to the node's full path was
> used, and now replacing label with most commonly used DT phandle. The
> codes were changed accordingly to the use of DT
301 - 400 of 14785 matches
Mail list logo
