-boot@lists.denx.de ; slahss ss
; u-boot@lists.denx.de
Subject: Re: [U-Boot] Hi, I am new to U-Boot, how do I get started?
You can start by asking a real question.
what are you trying to do?
Thanks, Ramon
On July 27, 2019 4:39:37 AM GMT+03:00, slahss ss wrote:
U
You can start by asking a real question.
what are you trying to do?
Thanks, Ramon
On July 27, 2019 4:39:37 AM GMT+03:00, slahss ss wrote:
>
>___
>U-Boot mailing list
>U-Boot@lists.denx.de
>https://lists.denx.de/listinfo/u-boot
--
Sent from my Androi
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On Mon, Apr 8, 2019 at 3:54 PM Beowulf F wrote:
> i saw in uboot smbios.c file you were writing directly to smbios. from
> what i read online smbios is readonly. are you able to do this on all
> systems or is this specific? sorry if this is a stupid question.
>
Not like OS, U-Boot is the one who
On 28 April 2015 at 14:51, Wandy Lau wrote:
> I am new to this project. But I am so interested with it and I want to dive
> into it. Where should I start ?
What you what to start with, see this wiki[1] for all details about
u-boot project
like documentation, development process, source code and e
I am new to this project. But I am so interested with it and I want to dive
into it. Where should I start ?
--
This is my life,but world of us~~
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
I add the Ti-edmaDriver reference
http://lists.denx.de/pipermail/u-boot/2014-October/191345.htmlarch/arm/include/asm/ti-common/ti-edma3.hdrivers/dma/Makefile
drivers/dma/ti-edma3.c My uboot Ver : U-Boot
2010.06My arch: DM8148 I want to know how to use ti-edma3.cdrive
Hi Michael,
On 5 March 2015 at 06:29, Michael van der Westhuizen
wrote:
> Resurrecting this old thread…
>
> Jason,
>
> We’re presently getting CONFIG_OF_EMBED up on a 32 bit PPC target and hit a
> problem that made me think of this thread.
>
> What we’re seeing (in v2014.07) is that the FDT poin
Resurrecting this old thread…
Jason,
We’re presently getting CONFIG_OF_EMBED up on a 32 bit PPC target and hit a
problem that made me think of this thread.
What we’re seeing (in v2014.07) is that the FDT pointer is not necessarily
aligned in the wrapper assembly file. We’ve worked around this
(sorry, forgot to cc list)
On 9 December 2014 at 07:17, Simon Glass wrote:
> Hi,
>
> On 8 December 2014 at 01:54, Duxiaoqiang wrote:
>> Hi Michael,
>>
>> Thanks for your information.
>>
>> My working result show that public exponent is not the only problem caused
>> by 64bit alignment, there ar
Hi,
On 4 December 2014 at 01:38, Michael van der Westhuizen
wrote:
> Hi All,
>
> Apologies for the delayed response, I’ve been on vacation.
>
> Since this was working for you (Duxiaoqiang) previously it suggests that you
> are using the default public exponent. If this is still the case you cou
Hi All,
Apologies for the delayed response, I’ve been on vacation.
Since this was working for you (Duxiaoqiang) previously it suggests that you
are using the default public exponent. If this is still the case you could, as
a temporary workaround, remove the public exponent from your public key
+Michael, U-Boot mailing list
Hi,
On 30 November 2014 at 19:26, Duxiaoqiang wrote:
>
> Hi Simon
>
>
>
> When I test verified boot with new version of U-boot and new version of
> mkimage, I encountered a alignment problem about RSA public key exponents.
>
>
>
> I tested verified boot successful
Hi Jason,
On 20 October 2014 20:52, Duxiaoqiang wrote:
> Hi Simon & All
>
>
>
> These days I tested verified U-Boot on ARM Foundation. And I found a problem
> when I tested like this:
>
> 1) Generate a FIT image and signature blob file like: mkimage –D “-I
> dts –O dtb –p 2000” –F kernel.it
Hi Simon & All
These days I tested verified U-Boot on ARM Foundation. And I found a problem
when I tested like this:
1) Generate a FIT image and signature blob file like: mkimage -D "-I dts
-O dtb -p 2000" -F kernel.its -k keys -K fvp.dtb -r signed_image.fit
2) Compile the Uboot li
Dear Duxiaoqiang,
In message
<1c178fd3e32fb24c8b1881fdcc155d8f8faaa...@szxema502-mbx.china.huawei.com> you
wrote:
>
>
> This week I downloaded the latest version of U-Boot and
> tested on ARM v8 platform, My boot environment was based on ARM
> trusted firmware: arm trusted firmware + U
Hi all
This week I downloaded the latest version of U-Boot and tested on ARM
v8 platform, My boot environment was based on ARM trusted firmware: arm trusted
firmware + Uboot + Linux.
Few weeks ago I did the same job on old U-Boot version, and it worked
well. I even tried FIT
(copying the mailing list - but please do this yourself from now on -
note you will need to join it first if you have not already)
Hi,
On 23 July 2014 03:20, Duxiaoqiang wrote:
> Hi Simon
>
>
>
> When I verified secure UBOOT with FIT image, I found a problem about
> it, and maybe need your
Dear Dimitar,
In message <1466257793.96923.1381071203850.javamail.apa...@mail22.abv.bg> you
wrote:
>
> My name is Dimitar Tomov. I'm student at Technical University of
> Sofia (Europe/Bulgaria).
Welcome.
I hope you are not disappointed when the first thing I do is asking
you to stick to standa
Hello to All,
My name is Dimitar Tomov. I'm student at Technical University of Sofia
(Europe/Bulgaria).
I have interest in embedded systems and some experience with embedded Linux
(have develop some specific Linux drivers, but nothing major).
0. Following "U-Boot Porting Guide" [Based on mess
Hi Developer :)
i have a question , N9 ( Nokia N9 ) have OMAP3630 1 GHz Armv7 CPU And
GPU PowerVR SGX530
Many Omap Device Have U-boot , it is posibel you port U-Boot to N9 ?
N9 Have VOL Up & VOL Down , and Power key But have not keyboard but these key
can a way for select
:( if you can plz, p
Hello,
it give me a great pleasure to write you i was browsing when i came
across your mail and i free to contact you ,i will be very happy to be in
communication with you if you will have the desire with me so that we can get
to know each other and see what happened in future. i will be very ha
hello
my name is Paulina and i seek for true friendship and
partner so i contact you,pls if you dont mind i will like
you to repl
hello
my name is Paulina and i seek for true friendship and
partner so i contact you,pls if you dont mind i will like
you to reply my mail
Dear friend f q
hi
a good news for you,< Web Portal> are mainly sale electronic products, now
our company is holding sale promotion, all products is sale in lowest price. if
you satisfied to our products and have any questions, you can freely contact us.
(iphone,Laptop,Television, Phon
Hi dear
With Due Respect And Humanity, I was compelled to write to you under
humanitarian grounds.I introducing my self as Miss kitni Sekani.I got your
contact from an online Directory and was delighted to contact you. I need
your help and I have a secured secret proposal and I seek a trust hone
Hi
this is an good website, there are many apple iphone, conon camera,latops,tv
and so on,
the price is much lower. very amazing.
Web : eorol.com
15:50:43
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u
Hi there
Greetings on behalf of the Imperial War Museum Duxford!
We appreciate you're very busy, and so just a quick note, if we may, to
introduce the idea of your organisation appearing in the Official Imperial War
Museum Duxford Air Show Programmes. These are collectors editions and available
Dear All:
A newbie post the first email.
Best Regards
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
hi..
i wanted to know where exactly.. the MAC address.. set in uboot
code where can i find those files...how.can.i read MAC adress from
flash..i am using 6280 ubootlader version.please guide me..
thanks & regards,
___
U-Boot mailing l
Dear Vaishali Dhakate,
you are violating a number of netiquette rules; this does not increase
the likelihood for a helpful reply.
- You hijack a mail thread.
- You top post / full quote (and even a message where I asked the OP
_not_ to do exactly this!
and some more.
Please read http://www.ne
On Tue, 7 Sep 2010 18:13:12 +0530, Vaishali Dhakate
wrote:
> Hi,
> I am looking for the website where I could browse the u-boot source code for
> Hawkboard only.
> As I dont have access to Linux machine right now.
> plz tell.
> Thanks
> Vaishali.
>
>
Aren't they here?
http://git.denx.de/
http
Hi , I am new to Linux crosscompilation ...u-boot and Porting Linux .
I plan to do this for Hawk board.
currently I am reading hapazardously..
http://elinux.org/Hawkboard Mainly from this source.tried to follow
these , alright ... still want to make sure I have the fundamentals in
place before I be
Hi,
I am looking for the website where I could browse the u-boot source code for
Hawkboard only.
As I dont have access to Linux machine right now.
plz tell.
Thanks
Vaishali.
On Fri, Sep 3, 2010 at 1:59 PM, Wolfgang Denk wrote:
> Dear "Tobias Waldekranz (Knutsson)",
>
> please STOP full quoting
Dear "Tobias Waldekranz (Knutsson)",
please STOP full quoting / top posting.
Read http://www.netmeister.org/news/learn2quote.html
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
Did you download the version from hawkboard.org?
In that case, you should be able to follow the instructions on:
http://elinux.org/Hawkboard#Compiling_u-boot_.28bootloader.29
If you are using the git version of u-boot replace
omapl_hawkboard_config with da850evm_config and try to boot that
first
You can find the official port of u-boot for the Hawkboard over at
hawkboard.org, but if you want to build the latest version of u-boot
that can be done as well.
The Hawkboard is very similar to the DA850 EVM so as a first step, you
could simply build u-boot for that board and it should boot just
Hi ,
I am trying to cross compile some libraries for ARM board
I will port a Linux OS to the hawkboard.
Want to study u-boot specific to this board so I ll be able to do
this. The first chore is to port u-boot on this board.
PLz help me , I was going through the uboot readme which directed me
to st
Thanks Guennadi.
I hope Nobuhiro san would answer to me.
This is my condition.
I have derived a board based on rsk7203 keeping in mind the hw of rks7203.
But I used 8 MBytes of Nor FLASH and 64 MBytes of SDRAM.
I have potred the linux-2.6.17 given with rsk7203 and I developed the kernel
driver fo
Thanks Guennadi.
I hope Nobuhiro san would answer to me.
This is my condition.
I have derived a board based on rsk7203 keeping in mind the hw of rks7203.
But I used 8 MBytes of Nor FLASH and 64 MBytes of SDRAM.
I have potred the linux-2.6.17 given with rsk7203 and I developed the kernel
driver fo
On Wed, 14 Jul 2010, Fabio Giovagnini wrote:
> Hi Guennadi.
> I saw your work about sh mobile.
> I have these problem:
> 1) I have my own board a little bit different than rsk7203; much NOR flash;
> much
> SDRAM;
> 2) To know better the structure I'd like to run from NOR flash without reloc.
>
Hi Guennadi.
I saw your work about sh mobile.
I have these problem:
1) I have my own board a little bit different than rsk7203; much NOR flash;
much
SDRAM;
2) To know better the structure I'd like to run from NOR flash without reloc.
How can I change noot.lds?
I'd not have the email of Nobuhiro
On Tue, 13 Jul 2010, Fabio Giovagnini wrote:
> Good morning,
> if any of you is involved in such a develop, I'd like to have discussion if
> possible about u-boot onto sh architecture
You're probably aware, that U-Boot is already running on SH. So, just post
your specific questions, you might w
Good morning,
if any of you is involved in such a develop, I'd like to have discussion if
possible about u-boot onto sh architecture
Thanks in advance
Best regards
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
Hi 2 all! Good subscrubtion, thx!
http://stydentkam.ru , http://ekzameny.net , http://referat-na-5.ru ,
http://hellocafe.ru , http://home-happy.ru , http://samkon.ru ,
http://scouts-russia.ru , http://bestxenon.ru , http://harmonia-plus.ru ,
http:
I'd like to make u-boot running on my sh2a 7203 based board, so I'd like to
staret from rsk+ status
Thanks a lot in advance
--
Fabio Giovagnini
Aurion s.r.l.
P.I e C.F.
00885711200
skype: aurion.giovagnini
Tel. +39.051.594.78.24
Cell. +39.335.83.50.919
www.aurion-tech.com
__
Thanks alot.
The very first problem was a permission problem, as you suggestied to ckech.
But now I think a Have a problem of irq losing form eth.
Thanks again
In data giovedì 18 marzo 2010 09:04:22, Wolfgang Denk ha scritto:
: > Dear Fabio Giovagnini,
>
> you are indeed completely off topic he
Dear Fabio Giovagnini,
you are indeed completely off topic here on the U-Boot list.
In message <201003180657.27345.fabio.giovagn...@aurion-tech.com> you wrote:
>
> Im able to mount the nfsroot filesystem but I get this message:
...
> Warning: unable to open an initial console.
^^^
I'm developing a custom board (designed by me) based on sh2a 7203 (Renesas).
I have some troubles with my SST flash, while I'm sure my eth0 card works.
For building my rootfs I use a script
Im able to mount the nfsroot filesystem but I get this message:
IP-Config: Complete:
device=eth0, addr=
Ok, thanks
Have a nice day
Alle 20:40, venerdì 5 febbraio 2010, Dennis Semakin ha scritto:
> Hi
> Maybe you should read README file from u-boot source code tree.
>
> 05.02.10, 17:40, "Fabio Giovagnini" :
> > I'm new of the list.
> > I'd like to build u-Boot for rsk+ 7203
> > because I designed
Hi
Maybe you should read README file from u-boot source code tree.
05.02.10, 17:40, "Fabio Giovagnini" :
> I'm new of the list.
> I'd like to build u-Boot for rsk+ 7203
> because I designed and produced a board sh2a 7203 based.
> I'm in trouble with some errors; where can I start to study mo
I'm new of the list.
I'd like to build u-Boot for rsk+ 7203
because I designed and produced a board sh2a 7203 based.
I'm in trouble with some errors; where can I start to study more?
Thanks a lot in advange
--
Fabio Giovagnini
Aurion s.r.l.
CF e P.IVA 00885711200
Tel. +39.051.594.78.24
Cell. +
Hi, hope everything is well.
I would like to invite you to www.uniqueBidWin.com . An auction where new
Iphone 32Gs is sold for $7.07
Find a bonuss just for yourself.
Want to make money from home, visit http://uniquebidwin.com/affiliate/
Best
___
U-Boot
On Fri, 2009-07-24 at 20:01 +0530, Aggrwal Poonam-B10812 wrote:
> > > I could not understand common/memsize.c, how it works?
> >
> > It writes markers at specific memory locations and then reads
> > these back. The algorithm is chosen to be fast but still to
> > be able to detect mirrored addres
Hi Aggrwal,
>> > I could not understand common/memsize.c, how it works?
>>
>> It writes markers at specific memory locations and then reads
>> these back. The algorithm is chosen to be fast but still to
>> be able to detect mirrored address ranges and other memory errors.
> Suppose I configure
> -Original Message-
> From: u-boot-boun...@lists.denx.de
> [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Wolfgang Denk
> Sent: Friday, July 24, 2009 11:41 AM
> To: IaMaPlAyEr
> Cc: u-boot@lists.denx.de
> Subject: Re: [U-Boot] hi, I could not understand the
Dear IaMaPlAyEr,
In message <2ae8403e0906242014k7e37b8f0tebaffaeeaea3f...@mail.gmail.com> you
wrote:
>
> I could not understand common/memsize.c, how it works?
It writes markers at specific memory locations and then reads these
back. The algorithm is chosen to be fast but still to be able to
de
Hi,
> Thanks for your patient explanation, I acquired a lot.
Glad if it helped.
> I just find in linux, arch/mips/bcm47xx/prom.c, there is a segment code just
> like what I suggest above.
> And move the code to my old box which bootloader is redboot, it works well.
> (Of
> course I also tryed m
Hi
Detlev Zundel =D
Thanks for your patient explanation, I acquired a lot.
yes, you are right, I think a little about the compatibility of the code.
yes, the compatibility!
I just find in linux, arch/mips/bcm47xx/prom.c, there is a segment code just
like what I suggest above.
And move the code
Hi,
> thanks for your reply.
> sorry for my ability of writing and understanding the code
> =D
>
> btw, How contribute my idea of this function, I means, it should be more
> clean or easy just like this:
>
>
> unsigned long get_ram_size(volatile long *base, long maxsize)
> {
>
> unsigned
hi~
thanks for your reply.
sorry for my ability of writing and understanding the code
=D
btw, How contribute my idea of this function, I means, it should be more
clean or easy just like this:
unsigned long get_ram_size(volatile long *base, long maxsize)
{
unsigned long mem;
fo
Hi ya,
> I could not understand common/memsize.c, how it works?
Like a charm ;)
> maxsize / sizeof (long), what's meaning of it? why sizeof (long) is
> dividend?
As the comment in line 50 states, "cnt" is used in pointer arithmetic,
so addr is increased in sizeof(long) bytes. maxsize however i
Hi all,
I could not understand common/memsize.c, how it works?
maxsize / sizeof (long), what's meaning of it? why sizeof (long) is
dividend?
just like stack, push every step mem addr to save:
save[i++] = *addr;
and then?
thanks
--
--
Sincerely,
HaveF
_
On Fri, May 29, 2009 at 12:49:52PM +0800, lanmanck wrote:
> hi:
> i am going to port uboot1.1.6 nand flash driver to my arm926ejs board.use
> /drivers/nand/nand.c. not nand_legacy.c .
> out cpu chip has a nand flash controller,the program flow is as below:
As Wolfgang pointed out, that is very o
Dear lanmanck,
In message <8741663.90171243572592561.javamail.corem...@bj163app88.163.com> you
wrote:
>
> i am going to port uboot1.1.6 nand flash driver to my arm926ejs board.use
> /drivers/nand/nand.c. not nand_legacy.c .
Forget it. U-Boot 1.1.6 is dead and buried and totally unsupported.
Pl
hi:
i am going to port uboot1.1.6 nand flash driver to my arm926ejs board.use
/drivers/nand/nand.c. not nand_legacy.c .
out cpu chip has a nand flash controller,the program flow is as below:
1、set address to controller's register
2、set command to controller's register
3、write controller's special
i want request to subscription the U-Boot-users mailing list
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
67 matches
Mail list logo