> > Not really ... that's how it all works. When Stefano sends pull RQ, it'll
> > go mainline.
>
> Aha, so it's not mainline yet after all ;-) But I get it; It's available in
> Fabio's repo and will be in Denx mainline soon.
Stefano's ... but it's almost mainline, for imx development, that's what
> Not really ... that's how it all works. When Stefano sends pull RQ, it'll go
> mainline.
Aha, so it's not mainline yet after all ;-) But I get it; It's available in
Fabio's
repo and will be in Denx mainline soon.
> I see no problems with the board DRAM detection on our board, no. I tested
>
> > Please use Stefano's imx git tree, which has support for mx28evk already.
>
> Thanks for the heads-up. It's a bit confusing and unexpected to have a
> mainline spread across different git trees; Will Stefano's mainline be
> integrated into the main-mainline sometime?
Not really ... that's how
> Please use Stefano's imx git tree, which has support for mx28evk already.
Thanks for the heads-up. It's a bit confusing and unexpected to have a mainline
spread across different git trees; Will Stefano's mainline be integrated into
the main-mainline sometime?
> m28evk and mx28evk differ in th
On Fri, Jan 6, 2012 at 3:54 PM, Robert Deliën wrote:
> Hi Marek,
>
> I'm currently working on U-Boot support for the Freescale i.mx28evk board. It
> started out as
> an update of the old Freescale supplied U-Boot 2009.08, but it ended up in
> reconfiguring
> your work on the Denx m28evk module.
> > make mx28evk_config? board/freescale/mx28evk
>
> Are you sure you checked it in? I checked, but I couldn't find it.
> (http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=include/config
> s;h=fe894c3b95e3d154264c2f8731b668c410131f01;hb=HEAD)
It's in u-boot-imx tree.
>
> > Yes, it ca
> make mx28evk_config? board/freescale/mx28evk
Are you sure you checked it in? I checked, but I couldn't find it.
(http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=tree;f=include/configs;h=fe894c3b95e3d154264c2f8731b668c410131f01;hb=HEAD)
> Yes, it can go both ways.
For the SoC I understand.
> >> I'm currently working on U-Boot support for the Freescale i.mx28evk
> >> board.
> >
> > This is already supported mainline.
>
> Hm; my workspace is quite up-to-date, but I didn't find it. What
> configuration should I use for the Freescale i.mx28evk board?
> m28evk_config boots the board, bu
>> I'm currently working on U-Boot support for the Freescale i.mx28evk board.
>
> This is already supported mainline.
Hm; my workspace is quite up-to-date, but I didn't find it. What configuration
should I use for the Freescale i.mx28evk board? m28evk_config boots the
board, but not much more. Th
> Hi Marek,
>
> I'm currently working on U-Boot support for the Freescale i.mx28evk board.
This is already supported mainline.
> It started out as an update of the old Freescale supplied U-Boot 2009.08,
> but it ended up in reconfiguring your work on the Denx m28evk module.
> Today I stumbled up
Hi Marek,
I'm currently working on U-Boot support for the Freescale i.mx28evk board. It
started out as
an update of the old Freescale supplied U-Boot 2009.08, but it ended up in
reconfiguring
your work on the Denx m28evk module. Today I stumbled upon a problem with
Ethernet.
It turned out that
11 matches
Mail list logo
