On 25 July 2011 18:14, Ralph Metzler r...@metzlerbros.de wrote:
Alex Zeffertt writes:
and then I burn the .kwb file into the flash using openocd.
Unfortunately I cannot get the Gig Eth ports to work in u-boot at the
moment. When I run the following at the command prompt the console
Dear Alex Zeffertt,
In message canniwjkvykei0qmrc8v5lvtar+q8czyetycpqdjzv34htcl...@mail.gmail.com
you wrote:
I can confirm that the issue is the same with OpenRD Ultimate. I.e.
ethernet is not working in HEAD but it is fine on tag v2011.06.
And what says git bisect ?
Best regards,
git bisect says:
c2dd0d45540397704de9b13287417d21049d34c6 is the first bad commit
commit c2dd0d45540397704de9b13287417d21049d34c6
Author: Aneesh V ane...@ti.com
Date: Thu Jun 16 23:30:49 2011 +
armv7: integrate cache maintenance support
- Enable I-cache on bootup
- Enable MMU
Hi list,
I've just bought an OpenRD Ultimate board and I've managed to get u-boot
running on it. I am building it like this, using the latest u-boot GIT
repo:
make mrproper CROSS_COMPILE=arm-none-linux-gnueabi-
make openrd_ultimate_config CROSS_COMPILE=arm-none-linux-gnueabi-
make u-boot.kwb
Alex Zeffertt writes:
and then I burn the .kwb file into the flash using openocd.
Unfortunately I cannot get the Gig Eth ports to work in u-boot at the
moment. When I run the following at the command prompt the console just
hangs and I have to reboot:
Marvell setenv ipaddr
5 matches
Mail list logo