Re: [U-Boot] Ping command

Dear smitha.va...@wipro.com, In message <07acdfb8eca8ef47863a613bc01bbb22032bc...@hyd-mkd-mbx02.wipro.com> you wrote: > > execute the PING > Command I get the following error > > >ping 172.16.52.20 > Using unknown device > ping failed; host 172.16.52.20 is not alive Check the source code and

Re: [U-Boot] Ping command

Hi Wolfgang Denk, I get the below messages. Its failing in the fec_send BD_ENET_TX_READY bit is not getting set. Any clue? EPN412> ping 172.16.52.20 Trying FCC1 ETHERNET pram_ptr->fen_genfcc.fcc_rbase 03efcc88 pram_ptr->fen_genfcc.fcc_tbase 03efcca8 Using FCC1 ETHERNET device sending ARP for ac10

Re: [U-Boot] Ping command

Dear smitha.va...@wipro.com, please stop top posting/ full quoting. You can find hints here: http://www.netmeister.org/news/learn2quote.html In message <07acdfb8eca8ef47863a613bc01bbb22032bc...@hyd-mkd-mbx02.wipro.com> you wrote: > > I get the below messages. Its failing in the fec_send BD_ENE

Re: [U-Boot] Ping command

Hi Wolfgang, I solved the unknow device issue by enabling the CONFIG_ETHER_ON_FCC1 in my config. Will check the TX clock configuration. Currently getting the blow messages. It says using the FCC1 ETHERNET. ping 172.16.52.60 Trying FCC1 ETHERNET pram_ptr->fen_genfcc.fcc_rbase 03efcc88 pram_ptr->f

Re: [U-Boot] Ping command

Hi Wolfgang, Thanks , ping is working the problem was with routing of the Tx clock. Thanks & Reagrds, Smitha Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclus