Hello Gary,
some comments/questions below:
Gary Jennejohn wrote:
Note that the LOGO_X/LOG_Y macros are defined in RRvision.h to center
the logo on the screen and might be useful for other boards.
Signed-off-by: Gary Jennejohn [EMAIL PROTECTED]
add empty line between commit message and
Hello,
김영순 wrote:
I’ve worked on my custum board based on SEQUOIA.
I’d like to add new device (DSP, SIZE=256M, CS4).
I added tlbentry(256M) in init.S and defined CS4 in sequoia.h.
Init.S:
/* TLB-entry for EBC(DSP) */
tlbentry( CFG_DSP_BASE, SZ_256M, CFG_DSP_BASE,
Hello,
tomydevasia wrote:
I am currently working u-boot for AT91SAM9260 based board. In this board
we are using LXT971A as phy rather than davicom dm9161a as in
AT91SAM9260-EK. We have u-boot-1.1.5 version with AT91SAM9260 support, but
it is having phy support only for Davicom dm9161a .
-by: Anatolij Gustschin [EMAIL PROTECTED]
---
drivers/video/mb862xx.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index 9684cf3..733d9a2 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -173,6 +173,8
Manuel Sahm wrote:
if I apply the patch with:
patch -p1 patchat91.diff
some messages occur, is this correct ?
(Stripping trailing CRs from patch.)
patching file board/atmel/at91sam9260ek/at91sam9260ek.c
patch unexpectedly ends in middle of line
Hunk #1 succeeded at 183 with fuzz 2
On the at91sam9260ep development board there is an EEPROM
connected to the TWI interface (PA23, PA24 Peripheral A
multiplexing), so we cannot use these pins as ETX2, ETX3.
This patch configures PA10, PA11 pins for ETX2, ETX3
instead of PA23, PA24 pins.
Signed-off-by: Anatolij Gustschin [EMAIL
Wolfgang Denk wrote:
snip
3582 06/10 Manuel Sahm[U-Boot-Users] Teridian Phy Support tr78q21x3
3618 06/10 Anatolij Gustschi Re: [U-Boot-Users] Teridian Phy Support
tr78q21x3
- asked submitter for proper patch
patch now resubmitted as
[U-Boot-Users] [PATCH v2] at91: Fix to
Building for 4xx doesn't work since commit 4dbdb768:
In file included from 4xx_pcie.c:28:
include/asm/processor.h:971: error: expected ')' before 'ver'
make[1]: *** [4xx_pcie.o] Error 1
This patch fixes the problem.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
cpu/mpc85xx/cpu.c
Hello,
Manuel Sahm wrote:
In the U-Boot 1.3.3 there is already this patch included
yes, of course this is already included. I meant you have to
_reverse_ this patch (or in other words un-apply it, patch -p1 -R),
as it was not included in U-Boot 1.3.0 and as you sad, with U-Boot
1.3.0
Hello,
Manuel Sahm wrote:
I added a Teridian Phy Driver (tr78q21x3) to the Uboot version 1.3.0
It works. (even in linux when I use the linux generic macb driver)
If I try to use the latest u-boot-version (1.3.3) with the macb driver -
ethernet doesn?t work (in u-boot and linux).
I don?t
MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
causing overriding default -Os option. New gcc (ver. 4.2.2)
produces warnings while compiling net/net.c file with -O2
option. The patch is an attempt to fix this.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
include/net.h
Kumar Gala wrote:
On Apr 30, 2008, at 6:34 AM, Anatolij Gustschin wrote:
MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
causing overriding default -Os option. New gcc (ver. 4.2.2)
produces warnings while compiling net/net.c file with -O2
option. The patch is an attempt to fix
Hi Vasiliy,
Vasiliy Leoenenko wrote:
cfi_flash: support of long cmd in U-boot.
Some NOR flash chips needs support of commands with length grether than max
value size of uchar.
For example all M18 family chips use 0x1ff command in buffered write mode as
value of program loops count.
Hi,
zhanglei459 wrote:
Hi,all:
I find there is a new video driver mb862xx.c in u-boot 1.3.2,can it
support mb86297?Thanks a lot!
no, this driver currently supports mb86295 and mb86276 chips only. If
the time permits, I will try to extend it to support mb86297 chip too.
Best regards,
Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
with cache enabled (TLB Parity exeption). This patch
fixes the problem.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
cpu/ppc4xx/4xx_enet.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/cpu/ppc4xx
This patch fixes compilation error
cmd_usb.c: In function 'do_usb':
cmd_usb.c:552: error: void value not ignored as it ought to be
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
include/usb.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/usb.h b
Currently (since commit b2e2142c) u-boot crashes on
sequoia board while SPR test if CONFIG_4xx_DCACHE is
enabled. This patch disables the cache while SPR test.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
post/cpu/ppc4xx/spr.c | 14 ++
1 files changed, 14 insertions
U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
enabled. To reproduce the problem ensure that 'ethrotate'
environment variable isn't set to no and then run
tftp 20 not_existent_file.
This patch tries to fix the issue.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
cpu/ppc4xx
Fix warnings while compilation with new gcc in eldk-4.2
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
post/drivers/memory.c |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index fbc349a..fb96985 100644
Adds configuration option for ATI Radeon 9200 card
support to sequoia config file. If CONFIG_VIDEO
is enabled, TEXT_BASE should be changed to 0xFFF8.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
include/configs/sequoia.h | 26 +-
1 files changed, 25
This patch tries to get rid of some assembler warnings about
changed .got2 section type while compiling x86 bios emulator
code.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
drivers/bios_emulator/biosemu.c|4 ++--
drivers/bios_emulator/include/x86emu.h | 10
Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
800x600, 640x480 at 24, 16 and 8 bpp.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
drivers/video/ati_radeon_fb.c | 319 +++--
include/radeon.h |4 +
2 files changed, 308
Fix compile warning on lib_ppc/board.c:615
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
include/common.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/common.h b/include/common.h
index 13428b3..854c444 100644
--- a/include/common.h
+++ b/include
Hello,
Rodolfo Giometti wrote:
On Mon, Feb 11, 2008 at 08:42:08PM +0100, Anatolij Gustschin wrote:
Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
800x600, 640x480 at 24, 16 and 8 bpp. Hope this patch
won't screw up X300 and X700 support.
Can someone test/check this issue
Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
800x600, 640x480 at 24, 16 and 8 bpp. Hope this patch
won't screw up X300 and X700 support.
Signed-off-by: Anatolij Gustschin [EMAIL PROTECTED]
---
drivers/video/ati_radeon_fb.c | 401 +++--
1 files
25 matches
Mail list logo