On Wednesday 06 August 2008, Steven A. Falco wrote:
> > Ack, we don't want hardware handshake enabled in U-Boot. But if I
> > understand this correctly, then this patch from Steven configures the
> > RTS/CTS lines correctly (they are multiplexed with other signals), so
> > that they *can* be used b
Stefan Roese wrote:
> On Friday 01 August 2008, Wolfgang Denk wrote:
>
>> In message <[EMAIL PROTECTED]> you wrote:
>>
>>> I have verified that the Sequoia (440EPx) does not have its UARTs
>>> properly configured. The attached patch corrects this by setting three
>>> bits in SDR0_PFC1 to e
On Friday 01 August 2008, Wolfgang Denk wrote:
> In message <[EMAIL PROTECTED]> you wrote:
> > I have verified that the Sequoia (440EPx) does not have its UARTs
> > properly configured. The attached patch corrects this by setting three
> > bits in SDR0_PFC1 to enable 4-wire mode, and to select cts
Wolfgang Denk wrote:
> In message <[EMAIL PROTECTED]> you wrote:
>
>> I have verified that the Sequoia (440EPx) does not have its UARTs
>> properly configured. The attached patch corrects this by setting three
>> bits in SDR0_PFC1 to enable 4-wire mode, and to select cts/rts
>> functionality fo
In message <[EMAIL PROTECTED]> you wrote:
>
> I have verified that the Sequoia (440EPx) does not have its UARTs
> properly configured. The attached patch corrects this by setting three
> bits in SDR0_PFC1 to enable 4-wire mode, and to select cts/rts
> functionality for the UARTs. Also, I modifie
I have verified that the Sequoia (440EPx) does not have its UARTs
properly configured. The attached patch corrects this by setting three
bits in SDR0_PFC1 to enable 4-wire mode, and to select cts/rts
functionality for the UARTs. Also, I modified the GPIO settings for
pins 34-37 to conform to the
