On Tue, Dec 29, 2020 at 7:28 PM John Dunlap
wrote:
> Hi Koba, Very good so far. Rebooted with both external and internal
> displays running although in wrong modes which I changed. Will see how it
> reboots shortly. -- John
>
> dunlap@lt9:~$ uname -a
> Linux lt9 5.10.0-05
Hi Koba, Very good so far. Rebooted with both external and internal
displays running although in wrong modes which I changed. Will see how it
reboots shortly. -- John
dunlap@lt9:~$ uname -a
Linux lt9 5.10.0-051000drmtip20201228-generic #202012280203 SMP Mon Dec 28
02:08:22 UTC 2020 x86_64
onths ago I updated my dock with
WD19FirmwareUpdateLinux_01.00.14.
Regards, John
On Tue, Dec 29, 2020 at 8:49 AM John Dunlap
wrote:
> changed /etc/default/grub and attached.
> Also attached /var/log/dmesg
>
> The external display does not turn on at boot but by requesting differen
ut usually
with incorrect settings such as wrong aspect ratios and mirrored instead of
separate.
Also, the mouse (not attached to the dock) becomes unresponsive for several
seconds at a time.
-- John
On Tue, Dec 29, 2020 at 8:34 AM John Dunlap wrote:
> A while back that was some work-around.
A while back that was some work-around. I'll run it without. Anything
else?
On Tue, Dec 29, 2020 at 2:30 AM koba <1899...@bugs.launchpad.net> wrote:
> @John,
> why do you disable enable_dp_mst?
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https:/
.enable_guc=2 i915.enable_dp_mst=0"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash mem_sleep_default=deep
i915.enable_guc=2 i915.enable_dp_mst=0 drm.debug=0x11e log_buf_len=16M"
GRUB_CMDLINE_LINUX=""
On Mon, Dec 28, 2020 at 11:41 PM John Dunlap
wrote:
> I'm heading for
I'm heading for bed shortly but will watch the email for another 5 minutes.
-- John
On Mon, Dec 28, 2020 at 11:40 PM John Dunlap
wrote:
> It's pretty jerky. Then after a number of cycles of blinking screen on
> the laptop and the dock seemingly being restarted (the Ethernet
a bit before it
stopped being jerky. Attached is the dmesg. -- John
On Mon, Dec 28, 2020 at 11:18 PM John Dunlap
wrote:
> I suppose these .deb files are the ones you'd like me to try:
>
> -rw-rw-r-- 1 dunlap dunlap 11476820 2020-12-27 18:19
> linux-headers-5.
I suppose these .deb files are the ones you'd like me to try:
-rw-rw-r-- 1 dunlap dunlap 11476820 2020-12-27 18:19
linux-headers-5.10.0-051000drmtip20201228_5.10.0-051000drmtip20201228.202012280203_all.deb
-rw-rw-r-- 1 dunlap dunlap 1248336 2020-12-27 18:22
linux-headers-5.10.0-051000drmtip202012
Thanks. I got -4007-oem to run. At boot it presented correctly with a
login box on the external screen and the laptop screen available. However
when I logged in both screens went blank for a bit after which only the
laptop screen was alive but it wasn't the primary so just blank. Right
clicking
k to 5.6.0-1036-oem.
On Mon, Dec 28, 2020 at 7:58 PM John Dunlap
wrote:
> Apply all 5 modules?
>
> On Mon, Dec 28, 2020 at 7:55 PM koba <1899...@bugs.launchpad.net> wrote:
>
>> it seems the patches haven't been applied.
>> could you please try this? T
Apply all 5 modules?
On Mon, Dec 28, 2020 at 7:55 PM koba <1899...@bugs.launchpad.net> wrote:
> it seems the patches haven't been applied.
> could you please try this? Thanks
>
> https://drive.google.com/drive/folders/1975W_7C6IJg9q_IDy08WrJYaIk_zfRp8?usp=sharing
>
> --
> You received this bug no
-- Forwarded message -
From: John Dunlap
Date: Mon, Dec 28, 2020 at 7:34 PM
Subject: Re: [Bug 1899882] Re: hdmi monitor on
To: Bug 1899882 <1899...@bugs.launchpad.net>
Hi Koba,
I got these warnings during apt install linux-image-oem-20.04-edge:
W: Possible missing firmwar
Hi Koba,
I got these warnings during apt install linux-image-oem-20.04-edge:
W: Possible missing firmware /lib/firmware/i915/tgl_huc_7.5.0.bin for
module i915
W: Possible missing firmware /lib/firmware/i915/tgl_huc_7.5.0.bin for
module i915
W: Possible missing firmware /lib/firmware/i915/tgl_dmc_v
Symptoms still basically the same with more recent bios & kernel. --
John
XPS 13 9300 -- 50H3P53 -- laptop
WD19TB --- 4BWNW43 -- Thunderbolt dock
S2319HS -- B4TYZ13 -- 23" monitor using DisplayPort cable
uname -a: Linux lt9 5.6.0-1036-oem #39-Ubuntu SMP Wed Dec 2 08:54:16 UTC
2020 x86_64
:
XPS_13_9300_1.2.0.exe
On Sat, Oct 17, 2020 at 2:44 PM John Dunlap wrote:
> When the two displays are mirrored the 5.4.0-51-generic kernel has come
> out of suspend mode correctly about 10 times without any failures. I had
> trouble earlier with that kernel when the displays were not mirrored.
When the two displays are mirrored the 5.4.0-51-generic kernel has come out
of suspend mode correctly about 10 times without any failures. I had
trouble earlier with that kernel when the displays were not mirrored. --
John
On Fri, Oct 16, 2020 at 10:19 AM John Dunlap
wrote:
> dunlap@
the shift key on the laptop to get a login banner. The oem kernel has
failed that test three times, never responding correctly. -- John
On Fri, Oct 16, 2020 at 9:22 AM John Dunlap
wrote:
> The oem kernel failed to display both the laptop screen and the external
> monitor after a s
The oem kernel failed to display both the laptop screen and the external
monitor after a suspend. However the mouse did move the pointer around the
laptop screen. The only solution seemed to be to power cycle. -- John
On Fri, Oct 16, 2020 at 8:32 AM John Dunlap
wrote:
> So far so good w
So far so good with the oem kernel. I should have included in symptoms
that the problem is intermittent. -- John
On Thu, Oct 15, 2020 at 10:54 PM John Dunlap
wrote:
> Koba, Thanks. Running oem kernel now. Testing in the morning. -- John
>
> On Thu, Oct 15, 2020 at 10:31 PM k
Koba, Thanks. Running oem kernel now. Testing in the morning. -- John
On Thu, Oct 15, 2020 at 10:31 PM koba <1899...@bugs.launchpad.net>
wrote:
> @John
> #sudo apt update
> #sudo apt install linux-oem-20.04
>
> --
> You received this bug notification because you are subscribed to the bug
> repor
Hi Koba, I don't know how to do that. I did make a recovery thumb drive.
-- John
On Wed, Oct 14, 2020 at 10:30 PM koba <1899...@bugs.launchpad.net>
wrote:
> @John,
> could you try the oem kernel!?
>
>
> ** Changed in: linux (Ubuntu)
> Assignee: (unassigned) => koba (kobako)
>
> --
> You rec
Public bug reported:
XPS 13 9300 -- 50H3P53 -- Dell laptop
WD19TB --- 4BWNW43 -- Dell Thunderbolt dock
S2319HS -- B4TYZ13 -- Dell 23" external monitor
External monitor remains black when waking system after suspending.
Works OK when log out then log in or when reboot.
Using HDMI cable
I have a patch for mgetty which has been running for a more than a year
and cures the problem. - John
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/990680
Title:
mgetty won't timeout (gets hung)
My symptoms are similar. I have had 4 serial modems connected with an
8-port Comtrol RocketPort OctaCable PCI board to various Linux boxes for
more than 10 years without trouble until a few months ago. Currently
with Ubuntu 10.04.4 I must kill -9 the mgetty jobs to get things going
again after th
How do I switch back to unity 3D so I can try replacing the window
decorator?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/727143
Title:
Windows border disappears when closing Java windows
--
ubu
I'm using Unity 2D and it seems to fix the problem except that there is
no longer a maximize button on my debugging console window... :(
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/727143
Title:
W
I actually prefer Gnome Classic. How do I switch from unity?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/727143
Title:
Windows border disappears when closing Java windows
--
ubuntu-bugs mailing
I just built a new development machine and I am having the same problem
as everyone else when I attempt to run Jetbrains IntelliJ IDEA 10.x
Ultimate on a fully updated Ubuntu 11.x(Natty) x86_64. It is *extremely*
annoying because it makes it difficult to run the debugging console on
my other screen
29 matches
Mail list logo
