Scott James Remnant wrote:
> Note that the ubuntu-boot contains a different script for this package
> with the same bug, so will need fixing (since that's what'll end up in
> karmic)
http://packages.ubuntu.com/search?keywords=ubuntu-boot says:
You have searched for packages that names contain ubu
Hi Leann,
I just installed the karmic package linux-image-2.6.31-9-generic.
Booting it led to a blank screen, but that's probably because I forgot
to disable kernel modesetting. I'll try that again.
Also, I am attaching a syslog of a typical freeze. I don't see anything
unusual before the free
I would prefer a solution that adapts the actual behaviour to the
documentation. User settings in /etc/sysctl.conf ought to take
precedence over package settings in /etc/sysctl.d/. Switching the order
in /etc/init.d/procps should do the trick. I'll test this and report
back.
--
sysctl.conf does n
It still is unfortunately. It hadn't happened for a long time and then
another freeze occured a couple of days ago. I am not sure if the system
was under heavy load, though.
I am currently using a kernel.org kernel version 2.6.30.5.
If you want the kernel configuration or anything else, let me
Same problem here. Only occurs after suspend-to-RAM, I think. Kernel
version is 2.6.28-14-generic. I can fix this by removing and re-adding
the ipw2200 module ("rmmod ipw2200; modprobe ipw2200").
** Attachment added: "dmesg.txt"
http://launchpadlibrarian.net/29940650/dmesg.txt
--
ipw2200 page
Here is what happens with a 2.6.30 kernel from kernel.org:
After booting the system, he lid button state is reported as "closed".
After closing the lid for several seconds and opening it again, it is correctly
reported as "open".
>From that point on, the state is correctly reported, but with a ra
Beeping has definitely stopped after I set APM to 255 (automated in a
boot script). Loud clicking has gone down to once every couple of days
or so.
--
Hard disk clicks and increasing Load_Retry_Count
https://bugs.launchpad.net/bugs/322331
You received this bug notification because you are a membe
I don't seem to be able to reproduce this with nautilus anymore, but the
expo applet still shows the same behaviour. (This is under 8.10 "intrepid".)
--
Two single clicks accepted as double-click
https://bugs.launchpad.net/bugs/226827
You received this bug notification because you are a member o
This seems to stop when I set APM to 255 (hdparm -B 255 /dev/).
Can you verify that?
--
Hard disk clicks and increasing Load_Retry_Count
https://bugs.launchpad.net/bugs/322331
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
Still doesn't work for me. Never has.
--
Terminal bell does not beep
https://bugs.launchpad.net/bugs/101838
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.co
Why is this a wishlist item? At least for network-manager-pptp, this
seems to be a regression from hardy, i.e. the GUI configuration dialog
under hardy provided the option of setting a custom MTU for PPTP
connections. (The fact that this setting was subsequently ignored is a
different issue, namely
*** This bug is a duplicate of bug 258743 ***
https://bugs.launchpad.net/bugs/258743
** This bug has been marked a duplicate of bug 258743
NM 0.7 Fails To Set Custom MTU
--
pppd sends packets exceeding MTU
https://bugs.launchpad.net/bugs/317567
You received this bug notification because y
Erno, I have nominated the problem for jaunty, i.e. proposed that it be
fixed before the release. To do that, simply click "Nominate for
release" near the top of the bug page and select the release(s) you want
to nominate the bug for.
--
SSH with GSSAPIAuthentication option on SSH servers are ver
Public bug reported:
Binary package hint: acpi-support
My hard disk (a Samsung HM160HC) emits a loud (and fairly scary) click
every couple of minutes or so. Sometimes this is accompanied by a louder
(and scarier) beeping noise. Every time it emits a click, the
Load_Retry_Count is increased by one
Trial and error: The magic number for the payload length is 1400.
Anything exceeding that terminates the connection. (Thus, the interface
MTU needs to be set to 1395.)
One more question: Why does pppd set the interface MTU to 1412 in the
first place, when it is called with "mtu 1200 mru 1500" in i
After manually setting the interface MTU to 1411, I found out that the
gateway does not accept packets with a payload length of 1416 either.
Also, when pppd receives an ICMP message with message code 4
("Fragmentation needed"), why doesn't it react by fragmenting and re-
sending the offending pack
Public bug reported:
Binary package hint: ppp
When I log on to a certain VPN of type "Microsoft VPN (PPTP)", the
connection is always dropped after some time. It turns out that this
happens when my computer sends a GRE-encapsulated PPP packet with a
payload length of 1417. The MTU of the network
Haven't tested the 2.6.27 Ubuntu kernel yet, but the issue remains the
same with a vanilla 2.6.27 kernel.
--
AltGr-ScrollLock does not work
https://bugs.launchpad.net/bugs/231022
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu
And when I say "gutsy", I mean "hardy".
Sorry about that...
--
Misleading error message with mv and existing directories
https://bugs.launchpad.net/bugs/71174
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
u
It is, however, fixed in gutsy (coreutils 6.10-3ubuntu2):
$ mkdir -p a b/a
$ touch b/a/foo
$ mv a b
mv: cannot move `a' to `b/a': Directory not empty
--
Misleading error message with mv and existing directories
https://bugs.launchpad.net/bugs/71174
You received this bug notification because you
It seems to work fine right now. Marking as invalid. I'll re-open the
bug if I encounter the issue again.
Thanks for reminding me about this bug.
** Changed in: compiz-fusion-plugins-main (Ubuntu)
Status: Incomplete => Invalid
--
Windows cannot be moved properly in Expo view
https://bugs
> [This is an automated message]
>
> Please attach the output of `lspci -vvnn`, and attach your
> /var/log/Xorg.0.log file from after reproducing this issue. If you've made
> any customizations to your /etc/X11/xorg.conf please attach that as well.
I don't mean to be impolite, but what do thes
I also have this issue when booting into recovery mode.
So, on my machine, this has nothing to do with X.org, I think.
--
/proc/acpi/button/lid/*/state always says "open"
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
I haven't tested the new Ubuntu kernel yet, but I still have the same
issue (i.e., button state always reported as "closed") running a fresh
2.6.27.1 kernel from kernel.org.
--
/proc/acpi/button/lid/*/state always says "open"
https://bugs.launchpad.net/bugs/89860
You received this bug notificatio
Public bug reported:
Binary package hint: mac-fdisk
This may be more of a feature request.
mac-fdisk should be available for other architectures. If you need to
prepare a USB memory stick for installing Linux on a Mac, the stick
needs to be formatted as a Mac boot disk. For this you need mac-fdi
I've reported the same bug against xterm (bug #255322).
--
terminal does not handle tab character in last column correctly
https://bugs.launchpad.net/bugs/253579
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing lis
gnome-terminal (or, more precisely vte) has the same problem (bug
#253579), which the upstream maintainer won't fix, because xterm shows
the same behavior (cf.
http://bugzilla.gnome.org/show_bug.cgi?id=545869).
--
xterm does not handle tab character in last column correctly
https://bugs.launchpad
Public bug reported:
Binary package hint: xterm
If a line has a tab character in the last column, xterm does not display
the tab.
To reproduce:
> python -c 'print "x"*79 + "\tABC"'
(Assuming that your terminal width is 80 characters.)
Expected behavior:
The terminal should display 79 "x"s and
Changing status according to Bhavani Shankar's confirmation.
** Changed in: gnome-terminal (Ubuntu)
Status: New => Confirmed
--
terminal does not handle tab character in last column correctly
https://bugs.launchpad.net/bugs/253579
You received this bug notification because you are a membe
Public bug reported:
Binary package hint: git-core
The file /etc/bash_completion.d/git should contain the option "--color"
for git-log (somewhere around line 670).
I am using hardy with git-core 1:1.5.4.3-1ubuntu2.
** Affects: git-core (Ubuntu)
Importance: Undecided
Status: New
-
Public bug reported:
Binary package hint: gnome-terminal
If a line has a tab character in the last column, gnome-terminal does
not display the tab.
To reproduce:
> python -c 'print "x"*79 + "\tABC"'
(Assuming that your terminal width is 80 characters.)
Expected behavior:
The terminal should di
I haven't tried switching the video driver yet, but I can report that
the problem still occurs with the 2.6.26 kernel fresh from kernel.org.
--
/proc/acpi/button/lid/*/state always says "open"
https://bugs.launchpad.net/bugs/89860
You received this bug notification because you are a member of Ub
Ah, I see where I went wrong.
Environment variables set in ~/.profile need to be exported in order to
be present in x-session-manager and all its descendants. (Whereas they
will be present in login shells even when they are not exported.) The
line 'PATH=~/bin:"${PATH}"' (no export) and the fact th
Thank you for taking the time to answer this issue. Examining the answer
you have given me, this does not appear to resolve the issue, though...
I assume you refer to the following in
https://help.ubuntu.com/community/EnvironmentVariables:
"In order to set environment variables in a way that effe
Problem persists.
$ cat /proc/version
Linux version 2.6.24-18-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu
4.2.3-2ubuntu7)) #1 SMP Wed May 28 20:27:26 UTC 2008
$ cat /proc/version_signature
Ubuntu 2.6.24-18.32-generic
--
Clocksource tsc unstable add 10 seconds to the boot time.
https
Is that just regarding hardy, or firefox in general?
--
firefox using over 90% of CPU
https://bugs.launchpad.net/bugs/78786
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
I might be having the same problem. While playback of mp3 and ogg files
works fine, enabling the crossfader (and restarting rhythmbox) increases
rhythmbox's CPU usage from single digits to about 20 or 30%. This is
more pronounced for certain audio files than for others--though I
haven't been able t
There you go.
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/14635500/Xorg.0.log
--
Two single clicks accepted as double-click
https://bugs.launchpad.net/bugs/226827
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
This probably isn't related to Xorg. The problem occurs much earlier:
The key combo stops working after running
/scripts/init-top/console-setup from the initrd.
I will investigate further to find out exactly which of the actions of
said script causes this.
--
AltGr-ScrollLock does not work
ht
Public bug reported:
Pressing AltGr-ScrollLock should show the current register contents on
the console. (See "fn_show_ptregs()" in file "drivers/char/keyboard.c"
and http://tldp.org/HOWTO/Keyboard-and-Console-HOWTO-8.html#ss8.2 ) It
doesn't. Pressing these keys does nothing at all.
Shift-ScrollL
CPU is still hot in hardy.
--
CPU Temperature significantly higher in Edgy than in Dapper
https://bugs.launchpad.net/bugs/67906
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
htt
Public bug reported:
Binary package hint: coreutils
Here's a wishlist item:
The BSD version of cp(1) has a "-n" command line option (cf.
http://www.freebsd.org/cgi/man.cgi?query=cp&sektion=1). It means: "Do
not overwrite an existing file."
This is a pretty nice thing to have if you want to copy
Attachments as per the Kernel Team Bug Policy
(https://wiki.ubuntu.com/KernelTeamBugPolicies).
Please note that the dmesg output does not contain the freeze.
Also attached is a short snippet of the syslog around the time of the
freeze. It basically shows nothing...
** Attachment added: "uname
Public bug reported:
My system sometimes freezes under heavy load.
Symptoms are:
- The cursor can still be moved.
- The system is completely unresponsive otherwise.
- The screen is not updated (except for cursor movement).
- Pressing Control-Alt-Backspace does not work.
- Pressing Control-Alt-F1
I can confirm this bug. I am using hardy (updated from gutsy) with
gnome-screensaver 2.22.2-0ubuntu1.
Please let me know what other information I can provide to help debug
this.
** Changed in: ubuntu
Status: New => Confirmed
** Changed in: gnome-screensaver (Ubuntu)
Sourcepackagename: Non
I am experiencing the same issue under hardy on a Samsung X20 XVM 1730 V
laptop. The lid button state is always reported as "closed", though.
For me, this used to work up until gutsy, I think. It is definitely a
regression.
--
/proc/acpi/button/lid/*/state always says "open"
https://bugs.launchp
I am experiencing exactly the same issue as Dagfinn Ilmari Mannsåker.
How can I see my XKB rules? What other information can I provide that
could be helpful?
One additional small observation: Under gutsy, switching worked by
pressing and holding the right Alt key (Alt Gr) and subsequently
pressin
Does this happen during a single download or with multiple downloads,
i.e. does Thunderbird just download two copies of a message or does it
download a second copy of a previously downloaded message at a later
time?
If you are complaining about the latter issue, I can confirm that
behavior. I am n
This might be the wrong place to complain about this, but the same thing bugs
me about the default (online) homepage in hardy: http://start.ubuntu.com/8.04/
This page will be seen almost exclusively by Ubuntu users. So why does its
stylesheet exclusively use Windows fonts?
(If anyone knows how to
Public bug reported:
Several apps accept two single clicks as a double-click.
(I take a double-click to mean two clicks on the same object within a
certain--short--time.)
Examples:
1. Nautilus: Open a window in list view, click on a file (or folder) and
quickly click on the file above it. (You
I think this bug is a duplicate of bug #41411. Can you confirm this?
--
bad default aliasing for 'arial'
https://bugs.launchpad.net/bugs/203824
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@list
I think the problem is that "CONFIG_X86_TSC" is not set in the kernel
configuration. If it were, the idle functions in
drivers/apci/processor_idle.c would mark the TSC as unstable, preventing
this bug.
--
Clocksource tsc unstable add 10 seconds to the boot time.
https://bugs.launchpad.net/bugs/19
I can confirm this behaviour.
I am not sure that you've correctly identified the cause, though.
Looking at the disassembled machine code for both function calls, I
found that 'printf("%s\n")' isn't handled by printf() at all -- the
compiler inserts a call to puts() instead. puts(), in turn, calls
Confirmed under gutsy with libc6 2.6.1-1ubuntu10.
Note that the output is sent to standard output for LD_DEBUG=help, but
to standard error for all other values.
** Changed in: glibc (Ubuntu)
Status: New => Confirmed
--
manpage for ld.so mistake
https://bugs.launchpad.net/bugs/121768
You
Hello Leann,
I haven't downloaded the hardy LiveCD yet, but I am running a custom-
built 2.6.24 kernel (configuration attached) and I still get no terminal
beep.
** Attachment added: "kernel configuration"
http://launchpadlibrarian.net/11813664/config-2.6.24-phil-20080125
--
Terminal bell do
I haven't tested Zealot's fix yet, but it looks promising.
The man page for pam_unix has the following to say about the nullok_secure
option that is used in /etc/pam.d/common-auth:
The default action of this module is to not permit the user access to a service
if their official password is blank
All right, I have just taken a quick look at the source and found the
following:
The function "get_all_applications" (gnome-panel/panel-run-dialog.c:817)
appears to get the list of applications from the Applications menu.
Indeed, adding "gvim" to the menu (in System->Preferences->Main Menu),
solve
Public bug reported:
Binary package hint: gnome-panel
The "Run Application" dialog (Alt-F2) does not include all installed
applications in the list of known applications. For instance, gvim is
missing.
Steps to reproduce:
1. Make sure that gvim is installed (it's in the "vim-full" package).
2. P
Public bug reported:
Binary package hint: compiz-fusion-plugins-main
When I try to move a window in Expo view (Super+E), it often resists for
a long time. Then, suddenly, it moves normally.
Steps to reproduce:
1. Hit Super+E (Windows key + E on many keyboards) to activate Expo view.
2. Try to mo
It looks like these are two different issues.
I can confirm both on my Samsung X20 XVM 1730 V laptop, though. I am
running a fresh install of gutsy.
--
No Splash Screen and No logout sound in Gusty
https://bugs.launchpad.net/bugs/157190
You received this bug notification because you are a member
I should add that the login sound works without a problem.
Could the splash screen issue be related to bug #179071?
--
No Splash Screen and No logout sound in Gusty
https://bugs.launchpad.net/bugs/157190
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
*** This bug is a duplicate of bug 78444 ***
https://bugs.launchpad.net/bugs/78444
** This bug has been marked a duplicate of bug 78444
gnome-splashscreen-manager 0.2-3 Help > About "Close" button non-working
--
Gnome splash Screen manager
https://bugs.launchpad.net/bugs/172913
You receiv
FWIW, this also happens under gutsy with a custum-built 2.6.23.13 kernel
(config attached).
** Attachment added: "Kernel configuration"
http://launchpadlibrarian.net/11410915/config-2.6.23.13-phil-20080114
--
Terminal bell does not beep
https://bugs.launchpad.net/bugs/101838
You received this
Public bug reported:
Binary package hint: procps
top(1) output is messed up when the first column (PID) is selected for
sorting and highlighted.
Steps to reproduce:
1. Open a terminal or switch to a virtual console.
2. Start top.
3. Hit 'x' to enable column highlighting. (The effect of this is n
Sebastien:
> weird, the hibernate action is supposed to not be listed on gutsy
I was going to report that as a bug. Do you know why this option is not listed?
Any pointers?
Thanks in advance!
--
hibernate from gdm fails
https://bugs.launchpad.net/bugs/153531
You received this bug notification
This may be related to #153204.
--
full-screen windows sometimes hide windows that should be above them
https://bugs.launchpad.net/bugs/153676
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs
Should I file a launchpad bug / feature request?
** Attachment added: "version.log"
http://launchpadlibrarian.net/10065546/version.log
** Also affects: linux-source-2.6.22 (Ubuntu)
Importance: Undecided
Status: New
--
Terminal bell does not beep
https://bugs.launchpad.net/bugs/1018
How did Detlef do it?
** Attachment added: "uname-a.log"
http://launchpadlibrarian.net/10065545/uname-a.log
--
Terminal bell does not beep
https://bugs.launchpad.net/bugs/101838
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
-
Does this web interface allow multiple attachments?
** Attachment added: "lspci-vvnn.log"
http://launchpadlibrarian.net/10065538/lspci-vvnn.log
--
Terminal bell does not beep
https://bugs.launchpad.net/bugs/101838
You received this bug notification because you are a member of Ubuntu
Bugs, whi
Here comes the info.
** Attachment added: "dmesg.log"
http://launchpadlibrarian.net/10065531/dmesg.log
--
Terminal bell does not beep
https://bugs.launchpad.net/bugs/101838
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ub
Public bug reported:
Binary package hint: compiz
When the log out dialog is displayed (by choosing "System -> Quit", by
clicking the log out panel button in the top right corner, or by
pressing the power button) the screen briefly fades out, returns to full
brightness, and slowly fades out again.
Public bug reported:
Binary package hint: compiz
The compiz shift switcher does not behave correctly when I press the
'escape' key.
Steps to reproduce:
1. Press Super-Tab to activate the application switcher. Hold down the Super
key.
2. Press Escape.
Expected result:
The application switcher s
Public bug reported:
Binary package hint: compiz
The compiz application switcher does not behave correctly when I press
the 'escape' key.
Steps to reproduce:
1. Press Alt-Tab to activate the application switcher. Hold down the Alt key.
2. Press Escape.
Expected result:
The application switcher
This may be related to bug #153676.
--
flickering and strangeness in full screen mode firefox while interacting with
input fields
https://bugs.launchpad.net/bugs/153204
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bu
I am having the same problem, I believe.
Reproduced on a Samsung X20 XVM 1730 V laptop with an Intel 915 graphics
controller using the gutsy live CD. I also enabled the "extra" desktop
effects.
** Changed in: compiz (Ubuntu)
Status: New => Confirmed
--
flickering and strangeness in full
I reported this on the gdb bug database. Here is the link:
http://sourceware.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-
trail&database=gdb&pr=2331
--
gdb cannot break on entry point for statically linked binaries
https://bugs.launchpad.net/bugs/151518
You received this bug notification because yo
Short answer: I just downloaded the gutsy live CD and there's still no
system beep.
I hadn't read your message yet and didn't think of saving the logs. I
will do so in the next couple of days.
Thanks for working on this!
--
Terminal bell does not beep
https://bugs.launchpad.net/bugs/101838
You
Setting /apps/metacity/global_keybindings/switch_windows_backward to
"Tab" (in gconf-editor) fixes this.
--
alt shift tab stopped navigating windows (gutsy)
https://bugs.launchpad.net/bugs/150702
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
Note: The warning "shared library handler failed to enable breakpoint"
is also displayed when I set the breakpoint to a higher address
(0x8048112 in this case), even though the breakpoint then works as
expected.
--
gdb cannot break on entry point for statically linked binaries
https://bugs.launch
Public bug reported:
Binary package hint: gdb
See the following transcript:
$ gdb /sbin/ldconfig
GNU gdb 6.6-debian
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it
This is untested, but the problem might be this:
pam-0.79/Linux-PAM/modules/pam_unix/support.c: _unix_blankpasswd
contains the following:
if ((retval == 1) && on(UNIX_NULLOK_SECURE, ctrl)) {
int retval2;
const char *uttyname;
retval2 = pam_g
Isn't this a PAM bug?
I get the same result as Kristian Erik Hermansen above, namely that
login is rejected by pam_securetty. However, I do not quite see why
pam_securetty should be run.
> grep -r pam_securetty /etc/pam.d
/etc/pam.d/login:auth requisite pam_securetty.so
So, if I am not mi
I am seeing the same problem. The solution in bug #69426 does not work for me.
The relevant line in /etc/default/acpi-support is:
STOP_SERVICES="mysql networking "
I am using feisty on a Samsung X20 XVM 1730 V laptop.
--
hangs after resume from hibernate, breaks network manager
https://bugs.lau
I may be having a different problem than other posters on this bug
report. My internet connection is a WPA-secured wireless connection. The
interface is brought up at boot time, and NTP is started. However, the
wireless card does not connect to the router before I log in and enter
my keyring passwo
Does it work if you comment out the line "exit 0" in /etc/network/if-
up.d/ntp?
To the maintainer(s): Why is this line in there by default? Would it
hurt to restart ntp whenever a network interface comes up, and let users
disable this if they want, instead of doing it the other way around?
--
nt
Public bug reported:
Binary package hint: tor
Whenever logrotate runs while tor is not running, logrotate delivers the
following error message to my mailbox:
/etc/cron.daily/logrotate:
There is no /var/run/tor directory.
error: error running shared postrotate script for /var/log/tor/*log
run-par
I am still seeing this bug under gutsy tribe 5.
Also, I have recently noticed that what is shown on the screen is not
exactly *random* garbage. There is usually a resemblance between the
colors in this strip at the bottom of the screen and what I had
previously viewed on my screen. Recently, a par
Hmm. It seems that this not a bug (or flea), after all.
The server advertises the "SASL-IR" capability, which means that it
should be ready to accept an initital response as optional argument to
the AUTHENTICATE command, according to http://tools.ietf.org/html/draft-
siemborski-imap-sasl-initial-r
This bug does not seem to be a duplicate of #65821. That bug report's
discussion answered my question about debug output, though (which, by
the way, should be answered by the man page, in my opinion).
The crucial difference between logging in with TLS and logging in
without TLS seems to be that th
** Description changed:
Binary package hint: mutt
If I try to log in to a certain IMAP server using TLS (mutt -f
imaps://server), the connection is dropped after I enter my username and
password. mutt reports that the "SASL authentication failed". Logging in
to the same IMAP server wi
Public bug reported:
Binary package hint: mutt
If I try to log in to a certain IMAP server using TLS (mutt -f
imaps://server), the connection is dropped after I enter my username and
password. mutt reports that the "SASL authentication failed". Logging in
to the same IMAP server without TLS (mutt
I can confirm that setting the proxy settings with
gnome-network-preferences works.
There is still the issue with the freeze, though. If rhythmbox cannot
connect to an Internet radio station, it should fail gracefully.
Should I file this as another bug or will you re-open this one?
Thanks for yo
I suddenly have the same issue on my Samsung X20 XVM 1730 V laptop.
I am almost certain that it worked until a couple of days ago. I haven't
changed the configuration. Has any update changed the
/apps/gnome-power-manager/action_button_suspend recently? Does any process
change that setting?
--
I have this issue, too. (I don't see "Audio" in the Preferences Menu,
though. The closest I have is System > Preferences > Sound > System Beep
> Enable System Beep. I guess this is just a difference in translation.)
Since I get no beeps on the virtual console, either, I suspect that this
is a kern
Could somebody change the status of this bug in "Nautilus" (as opposed
to "nautilus (Ubuntu)"), please? I can't do it myself, and I am not
completely sure what the status should be: It is fixed in the current
release (feisty), but unfixed (and confirmed) for dapper, which is still
supported.
--
T
Public bug reported:
Binary package hint: rhythmbox
Rhythmbox does not use the http_proxy environment variable to find out
which proxy to use (to play internet radio, for example). Instead it
tries to establish a direct connection and, since that fails, freezes.
I am using feisty with rhythmbox
Public bug reported:
Binary package hint: liferea
Liferea does not show links with rel="related". See the feed at
http://groovymother.com/index.atom for an example: Most posts are links
to other webpages, which are implemented as links with the XML attribute
rel="related". This is part of the Ato
Public bug reported:
Binary package hint: liferea
Liferea displays the date for posts as, for example, "Today 1:00 PM" or
"Aug 28 9:30 AM", even though LC_TIME is set to en_GB.UTF-8, which means
these should be displayed as "Today 13:00" and "Aug 28 9:30",
respectively.
I am using feisty with 1.
This problem is known (but, as yet, unconfirmed) upstream:
http://qa.openoffice.org/issues/show_bug.cgi?id=59974
** Also affects: openoffice via
http://qa.openoffice.org/issues/show_bug.cgi?id=59974
Importance: Unknown
Status: Unknown
--
Inconsistent unicode entry between Gnome and
** Bug watch added: GNOME Bug Tracker #126130
http://bugzilla.gnome.org/show_bug.cgi?id=126130
** Also affects: fileroller via
http://bugzilla.gnome.org/show_bug.cgi?id=126130
Importance: Unknown
Status: Unknown
--
archive manager doesn't open mis-named archive
https://bugs.launc
1 - 100 of 169 matches
Mail list logo
