Public bug reported:
I am interested in priming the lxc cache on new hosts, but this is
problematic because /var/cache/lxc is not world readable.
Could it become world readable?
This bug should be WONTFIX if the cache can contain secrets or 'private'
images. But ideally these would be declared
Public bug reported:
I am interested in priming the lxc cache on new hosts, but this is
problematic because /var/cache/lxc is not world readable.
Could it become world readable?
This bug should be WONTFIX if the cache can contain secrets or 'private'
images. But ideally these would be declared
The root users .ssh/known_hosts is also getting polluted by 'juju run',
which is causing subsequent 'juju run' commands to fail when IP
addresses are recycled.
I'm also seeing IP addresses recycled much more often, especially with
the local provider which now reuses them immediately.
** Changed
I think this is dependent on security bug #892552
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to juju in Ubuntu.
https://bugs.launchpad.net/bugs/802117
Title:
juju ssh/scp/run commands cause spurious key errors
To manage
I think this is dependent on security bug #892552
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/802117
Title:
juju ssh/scp/run commands cause spurious key errors
To manage notifications about this
The root users .ssh/known_hosts is also getting polluted by 'juju run',
which is causing subsequent 'juju run' commands to fail when IP
addresses are recycled.
I'm also seeing IP addresses recycled much more often, especially with
the local provider which now reuses them immediately.
** Changed
Samir Ibradžić (sibradzic) - I read the details of your patch, but not
sure how to apply it (limited Linux skills!!). I'm having the same issue
with this camera on Ubuntu 15.04. Laptop is a new Thinkpad E550.
Will your patch work on 15.04 while we wait for a fix to come through?
Any instruction
Note that this behaviour was originally reported here:
https://bugs.launchpad.net/oslo.log/+bug/1076466
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1452312
Title:
glance-registry process spins
Note that this behaviour was originally reported here:
https://bugs.launchpad.net/oslo.log/+bug/1076466
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to python-eventlet in Ubuntu.
https://bugs.launchpad.net/bugs/1452312
Title:
Public bug reported:
When using dia I saved some .png images, as I had done before with the
same names. Going to nautilus in order to select those images, I find
that they are not listed, yet the dia save dialogue does show them.
Reloading did not find them. See attached screenshot, which shows
Public bug reported:
Please allow specifying a MIRROR in /etc/default/squid-deb-proxy , and
use this setting to rewrite http://(*.)?archive.ubuntu.com/ to $MIRROR.
This would be of most benefit to mobile users.
http://scyu.logdown.com/posts/260278-squid-deb-proxy-redirect-default-
Public bug reported:
Please allow specifying a MIRROR in /etc/default/squid-deb-proxy , and
use this setting to rewrite http://(*.)?archive.ubuntu.com/ to $MIRROR.
This would be of most benefit to mobile users.
http://scyu.logdown.com/posts/260278-squid-deb-proxy-redirect-default-
Public bug reported:
UCS (and other third party component archives) needs a way to download
the source code of a component and add it to the current project's build
system. This suggests that the qmake build templates for Ubuntu SDK
projects need some sort of a hook or identifiable entry point so
Jorge,
Thanks for the extra info -- very helpful:
$ ./tools/with_venv.sh glance --os-image-api-version 2 image-list
venv develop-inst-nodeps: /mnt/sam/git/python-glanceclient
venv runtests: PYTHONHASHSEED='0'
venv runtests: commands[0] | glance --os-image-api-version 2 image-list
None is not of
Jorge,
Thanks for the extra info -- very helpful:
$ ./tools/with_venv.sh glance --os-image-api-version 2 image-list
venv develop-inst-nodeps: /mnt/sam/git/python-glanceclient
venv runtests: PYTHONHASHSEED='0'
venv runtests: commands[0] | glance --os-image-api-version 2 image-list
None is not of
Public bug reported:
The version of Poco shipped is very old, is there any chance of getting
it updated ? For my purposes, 1.4+ would be great.
** Affects: poco (Ubuntu)
Importance: Undecided
Status: Confirmed
--
You received this bug notification because you are a member of
Hi Jorge,
Thanks for your bug report.
I haven't been able to reproduce this (I suspect I'm missing a step).
I'm running the latest server code and using a 0.15.0 client version.
$ ./tools/with_venv.sh glance image-create --disk-format raw
--container-format bare --name thisisnull
Daniel, the setting System Security Privacy Lock phone Lock
when idle sets how long the phone will wait, if left untouched, before
locking the screen. I currently have it set to 1 minute. However, if I
press the power button to turn off the screen, and then immediately
press the power button
In general there should probably be fallback handling in the URL
dispatcher for all unknown URL schemata, I think? (Although having a
dedicated handler for market: URLs may also be useful.)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I'm again getting regular network drops with 3.19.0-14.14. Logs indicate
the same problem as originally reported.
Apr 16 08:49:32 aargh kernel: [ 2733.908980] [ cut here
]
Apr 16 08:49:32 aargh kernel: [ 2733.909006] WARNING: CPU: 2 PID: 661 at
The isssue occurs both with wifi power managent on and with it turned
off.
** Changed in: bcmwl (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1432659
Public bug reported:
software-updater has just informed me that I don't have enough free disk
space on /boot and even tells me two options to free space, one of which
will probably work in this situation but involves dropping to the
command line. Despite telling me how to solve the problem, it
** Attachment added: fresh boot with upstart and three successful
suspend/resume cycles
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1435728/+attachment/4370007/+files/3.19-12.upstart.success.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
The trigger was not the kernel version. The trigger is upstart or
systemd. The laptop reliably reconnects to wifi after resume if I have
booted using the 'upstart' option in the grub advanced boot menu. If I
have booted using the default grub selection, the laptop reliably fails
to reconnect to
** Attachment added: Fresh boot with systemd and three failed suspend/resume
cycles
https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1435728/+attachment/4370008/+files/3.19-12.systemd.fail.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
As of the most recent update (3.19.0-12), is has returned to
consistently failing.
Turning off power management via 'sudo iwconfig wlan0 power off' has no
effect.
** Attachment added: Current kern.log showing resume fail after a fresh boot
I am having trouble reproducing this at all with the latest round of
updates. I still get the traceback (the bluetooth one), but wifi is
reliably reconnecting.
** Changed in: bcmwl (Ubuntu)
Status: Triaged = Incomplete
--
You received this bug notification because you are a member of
Public bug reported:
Installation via software-center failed
ProblemType: Package
DistroRelease: Ubuntu 15.04
Package: vim-syntastic 3.6.0-1
ProcVersionSignature: Ubuntu 3.19.0-10.10-generic 3.19.2
Uname: Linux 3.19.0-10-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.16.2-0ubuntu5
It seems that this is a regression from Utopic.
I just booted a Utopic USB stick, switched on the proprietary driver,
and connected to my wifi network. I then performed 10 suspend/resumes in
sequence (using suspend from the system menu), and they all worked
flawlessly. The kern.log file was
Hibernate fails to resume (running 'sudo pm-hibernate', as it seems
disabled by default), and requires a power cycle to recover.
** Changed in: bcmwl (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Public bug reported:
Testing hibernate on this hardware. It fails to resume, ending up with a
black screen.
ProblemType: KernelOops
DistroRelease: Ubuntu 15.04
Package: linux-image-3.19.0-10-generic 3.19.0-10.10
ProcVersionSignature: Ubuntu 3.19.0-10.10-generic 3.19.2
Uname: Linux
wlan0 IEEE 802.11abg ESSID:MYSSID
Mode:Managed Frequency:2.447 GHz Access Point: 01:23:45:67:89:ab
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I am not able to get the card recognized at all using a Trusty CD,
either with the default setup or after selecting the broadcom drivers
from System Settings/Software and Uodates/Additional Drivers.
** Changed in: bcmwl (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug
Public bug reported:
Open software center, and search for 'steam' using the top right search
box. The results list the 'Steam' package first on the list, but
clicking on this package displays an error page - 'Not found. There
isn't a software package called steam in your current software
Workaround from the command line is 'sudo apt-get install steam' to
install it, and running 'steam' to launch it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1438336
Title:
Steam not found error
Mar 25 20:33:39 aargh kernel: [ 121.980963] PM: resume of devices complete
after 754.239 msecs
Mar 25 20:33:39 aargh kernel: [ 121.981208] [ cut here
]
Mar 25 20:33:39 aargh kernel: [ 121.981216] WARNING: CPU: 2 PID: 457 at
Looking a little closer, the 'wl' module looked promising. 'rmmod wl
modprobe wl' does get everything back on its feet after the resume
failure.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1435728
No problems during normal operation for a few days. The suspend/resume
issue is a separate bug. Flagging this one INVALID.
** Changed in: bcmwl (Ubuntu)
Status: Incomplete = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I did a suspend/resume which triggered the failure. The terminal command
failed:
root@aargh:~# rmmod bcmwl modprobe bcmwl
rmmod: ERROR: Module bcmwl is not currently loaded
Bouncing network manager brought me back online, but bcmwl did not get reloaded.
root@aargh:~# service NetworkManager
cat /proc/acpi/wakeup wakeup
** Attachment added: wakeup per DebuggingKernelSuspend
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1435728/+attachment/4355179/+files/wakeup
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
dmesg dmesg.txt, after performing resume-trace debugging procedure
for finding buggy drivers.
The wiki page and kern.log state that the system clock will need to be
reset after the procedure. This did not happen. I do not know if this
means the trace did not work as expected, or if someone or
The chunk of kern.log, truncated in the above comment.
It seems at wireless is often recovering after the failure, and in the
cases it doesn't 'sudo service NetworkManager restart' sorts it out. The
above pm_trace procedure was performed after a fresh boot.
** Attachment added: chunk of kern.log
The above process was performed after a fresh boot.
It also seems that wifi often recovers after the failure, and on the
occasions it doesn't recover itself 'sudo service NetworkManager
restart' sorts it out.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
By 'normal operation' I mean from a clean boot and never having
suspended.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1432659
Title:
HP Pavilion 13-b208tu w/ Broadcom BCM43142 Wifi unstable,
I have opened Bug #1435728 for the suspend/resume issue.
The original failure reported on this bug happened during normal
operation. So far with the F.24 bios and current Vivid things have been
stable, and I will flag this bug Invalid in a few days if they remain
so.
--
You received this bug
Public bug reported:
The wifi connection on the HP 13-b208tu laptop (Broadcom BCM4365) fails
during suspend or resume.
This may be related to Bug 1432659. Also, per Bug 1434136 this laptop is
running the latest version of the bios that boots Linux (F.24).
Mar 23 22:55:48 aargh kernel: [
Router firmmware has been updated, although I don't think that can help
us diagnose the fault.
I wasn't able to reproduce today through normal use, but am able to
trigger a failure using suspend/resume. Is this the same bug, and maybe
a pointer to an ultimate fix?
Mar 23 22:55:48 aargh kernel: [
Still just those 4 lines using:
ro recovery nomodeset debug ignore_loglevel log_buf_len=10M
print_fatal_signals=1 LOGLEVEL=8 earlyprintk=efi,keep sched_debug
i915.modeset=0 nouveau.modeset=0
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I'll attach a photo of how far I've gotten, although it won't add much.
** Attachment added: Screenshot showing console output with kernal debug flags
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1434136/+attachment/4350641/+files/IMG_20150320_181753.jpg
** Changed in: linux (Ubuntu)
I get the same failure booting an Ubuntu 14.10 LiveCD USB stick in non
UEFI mode (using the F9 boot menu I can explicitly select booting the
stick in UEFI or non-UEFI mode).
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are
The failure to boot Ubuntu 15.04 with the F.26 bios was reproduced with
a USB recovery (bypassing any mess the BIOS update did to /boot), and
after checking all the bios settings (there are very, very few things to
twiddle on this model).
With F.24, I am still seeing failures identical to the one
I saw a similar problems with 14.10. I do not know if the kernel logs
were similar, but could try to capture one with a LiveCD if it will
help. I only had 14.10 on there a few days before upgrading.
The Wifi access point is an Asus DSL-N10, hardware version B1 running
firmware version 1.0.4.9.
Public bug reported:
While trying to fix Bug #1432659, I updated the HP Pavilion 13-b208tu
bios to the latest available on the HP website (F.26). After the update,
the laptop no longer boots Ubuntu 14.10 or Ubuntu 15.04 (Ubuntu 15.04
from the hard drive, Ubuntu 14.10 using a LiveCD). The grub
Bug #1434136 for the unbootable HP Pavilion 13-b208tu with F.26 bios.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1432659
Title:
HP Pavilion 13-b208tu w/ Broadcom BCM43142 Wifi unstable, panics
Per description, fresh information cannot currently be collected but
pre-update kernel bug report information can be found in Bug #1432659
** Changed in: linux (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Using the earlyprintk=efi kernel boot option, I can get 4 more lines of
output. Initializing the cpuset, cpu and cpuacct cgroups, and the final
line printing the Linux kernel version.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
That was interesting. I eventually worked out how to get the BIOS
updated (which requires a Windows 8.1 machine to unpack the BIOS, and
combining it onto an HP_TOOLS UEFI diagnostics stick since any HP_TOOLS
partition I had went with the Ubuntu install).
f.26 would not boot at all. Get to grub,
HP Pavilion 13-b208tu (correct formatting for the scrapers)
** Description changed:
- This new laptop's wireless connection (Broadcom BCM43142) is
- disconnecting every few minutes. This corresponds to panics and
- tracebacks in the kernel log.
+ This new laptop's wireless connection (HP
The laptop is an HP Pavilion 13 -b208tu , per http://support.hp.com/us-
en/product/HP-Pavilion-13-b200-Notebook-PC-
series/7527795/model/7597682/manuals?lang=encc=us . Product number is
LOL34PA#AKL .
** Changed in: wl (Ubuntu)
Status: Incomplete = Confirmed
--
You received this bug
$ sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date
F.24
11/28/2014
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1432659
Title:
HP Pavilion 13-b208tu w/ Broadcom BCM43142 Wifi
Public bug reported:
This new laptop's wireless connection (Broadcom BCM43142) is
disconnecting every few minutes. This corresponds to panics and
tracebacks in the kernel log.
The laptop was freshly installed with Ubuntu 14.10 (Utopic), and
disconnections were seen. I then upgraded it to Ubuntu
** Changed in: postgresql (Juju Charms Collection)
Status: Triaged = In Progress
** Changed in: postgresql (Juju Charms Collection)
Assignee: (unassigned) = Stuart Bishop (stub)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Committed
** Changed in: dkimpy
Importance: Undecided = High
** Changed in: dkimpy
Assignee: (unassigned) = Stuart Gathman (stuart-gathman)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1350141
I also suffer this problem.
Ubuntu 14.10
3.16.0-30-generic
Transmission Remote GUI version 5.0.1
The problem is intermittent. It happens using multiple Transmission server
versions on multiple remote hosts.
I have done an 'apt-get purge' and removed ~/.config/Transmission\ Remote\
GUI, then
** Also affects: postgresql (Juju Charms Collection)
Importance: Undecided
Status: New
** Changed in: postgresql (Juju Charms Collection)
Status: New = Triaged
** Changed in: postgresql (Juju Charms Collection)
Importance: Undecided = High
--
You received this bug
Amulet tests are spuriously failing due to this bug. IP addresses get
recycled as the leases expire, and the 'juju run' commands Amulet makes
fail due to the old host key being in the root users known_hosts file.
==
ERROR: test
Amulet tests are spuriously failing due to this bug. IP addresses get
recycled as the leases expire, and the 'juju run' commands Amulet makes
fail due to the old host key being in the root users known_hosts file.
==
ERROR: test
*** This bug is a duplicate of bug 1389741 ***
https://bugs.launchpad.net/bugs/1389741
** This bug has been marked a duplicate of bug 1389741
mythtv-common needs to depend on pwgen
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Epgsnoop bug
** Changed in: mythtv (Ubuntu)
Status: Triaged = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/554972
Title:
Program Guide DST offset is GMT and not Local
To manage
Also, I always lock my phone's rotation so that it's always portrait
only. A lock to landscape API for a game should override this, for
that game only.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
The app.js file that's part of the default HTML app template makes
reference to cordova.js, though, so I assumed that it was present
somehow.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1338445
Public bug reported:
See attached image.
Obviously a scrollbar should be unobtrusive on a mobile platform, but
this isn't unobtrusive, it's invisible. I had to look very very hard to
be sure it was even there at all. This surely can't be the design goal;
if so, why have a scrollbar at all?
**
I get this on conneting...
$ nmcli con up id bunyip2
(process:15534): GLib-GObject-WARNING **:
/build/buildd/glib2.0-2.42.1/./gobject/gsignal.c:3101: signal id '11' is
invalid for instance '0x22f31d0'
But it seems to all work ok
--
You received this bug notification because you are a member
This problem is present in Ubuntu 14.04 and 14.10
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1033146
Title:
Microsoft LifeCam HD-3000 with Ubuntu 12.04: webcam light blinks, and
freezes with
I have started to get this on my 14.04 double-header nvidia amd64
system. I can't say what events cause it, but moving a window generally
fixes it until the next time. I don't need to have a lot of windows
open to see it.
--
You received this bug notification because you are a member of Ubuntu
The swift(1) command line tool is lying.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/130
Title:
metadata update should not delete large file manifest
To manage notifications about this bug
There doesn't seem to be anything useful in unity8-dash.log. I've pasted
mine below (this is after I restarted unity8-dash, and is in an newly
created x86 emulator).
phablet@ubuntu-phablet:~$ cat ~/.cache/upstart/unity8-dash.log
file:///usr/share/unity8/Dash/Dash.qml:278: ReferenceError:
** Also affects: python-swiftclient
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to swift in Ubuntu.
https://bugs.launchpad.net/bugs/130
Title:
metadata update should not delete large
** Also affects: python-swiftclient
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/130
Title:
metadata update should not delete large file manifest
How do I work out which version of the deb is installed in the image?
Ubuntu SDK Devices emulator says Ubuntu version: 20140917, Image
version: 243. I'm happy to upgrade it, but I'm not sure how from Ubuntu
SDK!
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Ah, once the emulator is running, I can ssh into it.
$ dpkg -l | grep unity-scope-click
ii unity-scope-click
0.1.1+14.10.20140915-0ubuntu1 i386 Click Packages Scope
for Unity
ii unity-scope-click-departmentsdb
I'm using the emulator. Installed yesterday. System Settings says it's
Ubuntu 14.10 (r243).
** Changed in: unity-scope-click (Ubuntu)
Status: Incomplete = New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
When I first use the click scope to search for and install an app on the
phone, I need to sign in with Ubuntu One. Once I have so signed in, I'm
left looking at the System Settings screen rather than continuing with
installation of the app I chose. Worse, if I then return to
Public bug reported:
When I install an app on the phone, the scope updates to have an Open
and Uninstall button, but if I've left the Dash in the interim (and so
can't use that button) then the app I've just installed does not appear
anywhere obvious. Perhaps the All scope on the home of the dash
Ran into this bug with the 14.04.1 x64 Server installer. Switched to a
slower USB drive after reading this thread and was able to install
without any issues.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Same as #42
When the mouse is moved to keep the screen awake (as it's fading to
black), i'll see this afterwards.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1311316
Title:
After locking screen
Are you using SSL (https)? Judging on the numbers alone I'd be
suspicious that SSL compression has been enabled -- but it's just a
guess.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1378388
Title:
We have switched to the kernel in -proposed and everything looks good.
So verified.
** Tags removed: verification-needed-trusty
** Tags added: verification-done-trusty
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
The following packages have unmet dependencies:
linux-generic: Depends: linux-image-generic (= 3.2.0.68.81) but 3.2.0.68.81 is
installed
Depends: linux-headers-generic (= 3.2.0.68.81) but 3.2.0.67.79
is installed
** Affects: linux-meta (Ubuntu)
** Tags added: regression-release
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1357295
Title:
bcache_writebac blocks and goes silent on trusty kernel
3.13.0-24-generic #47-Ubuntu
To manage
Hi,
I couldn't find the option setting, (in a bit of a rush right now) but
it does stay on top if playing, not if paused.
I'm using ubuntu 14.04 as it comes i.e. unity and whatever window
manager is standard.
Stuart
On 12/08/14 22:29, rvm wrote:
Do you have the option Stay on top - while
Hi,
I couldn't find the option setting, (in a bit of a rush right now) but
it does stay on top if playing, not if paused.
I'm using ubuntu 14.04 as it comes i.e. unity and whatever window
manager is standard.
Stuart
On 12/08/14 22:29, rvm wrote:
Do you have the option Stay on top - while
Public bug reported:
When smplayer is playing a video in a window it can be paused and
resumed by pressing the spacebar. Stragely, each time the spacebar is
pressed to pause or resume, the window creeps a few pixels up and to the
left of the screen. Eventually it reaches the top left corner,
Public bug reported:
I have a desktop computer running Ubuntu 14.04. Today I discovered that
the battery status for my wireless mouse and keyboard are shown in the
Power section of System Settings, which was very pleasing. However,
there is no way to show the battery status in the menu bar on
Public bug reported:
Running 14.04. My screen (an external monitor, connected to a desktop
computer) has started going black and then returning back to normal a
couple of seconds later. This happens every few minutes. dmesg shows
lines:
[ 9241.255109] HDMI: ELD buf size is 0, force 128
[
I believe I had the same issue, my M91p would freeze after some random time
from boot, however its not an immediate hang, the mouse cursor goes on a go
slow, then disappears over a few seconds, keyboard and mouse are then totally
unresponsive including ctrl-alt-f1 etc. However I *think* its
** Also affects: python-swiftclient (Ubuntu Utopic)
Importance: Undecided
Status: Confirmed
** Also affects: python-swiftclient (Ubuntu Trusty)
Importance: Undecided
Status: New
** Changed in: python-swiftclient (Ubuntu Utopic)
Status: Confirmed = Fix Released
**
** Also affects: python-swiftclient (Ubuntu Utopic)
Importance: Undecided
Status: Confirmed
** Also affects: python-swiftclient (Ubuntu Trusty)
Importance: Undecided
Status: New
** Changed in: python-swiftclient (Ubuntu Utopic)
Status: Confirmed = Fix Released
**
** Also affects: python-swiftclient (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to python-swiftclient in Ubuntu.
https://bugs.launchpad.net/bugs/1282861
Title:
crash on
** Also affects: python-swiftclient (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1282861
Title:
crash on content-encoding:gzip http responses
401 - 500 of 2409 matches
Mail list logo
