Why is this marked as "fix released"? It's still broken on Ubuntu 20.04 LTS,
the fix has not been released into it.
At the very least, the behavior does not match what is described in the
sshd_config man page. Nowhere does it mention that Match blocks don't work
inside Include files. Not only th
TJ's howto from comment #47 is much better as it allows installing
directly to the target disk, mine needs you to install it to a second
disk and copies over to the target disk.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://b
By the way, PureOS has the same bug, so I think it goes all the way up to
Debian.
Here's a guide I created on how to move a unencrypted install to fully
encrypted (works with Ubuntu as well):
https://github.com/jjakob/wiki/wiki/Migrating-an-unencrypted-PureOS-
Debian-install-to-fully-encrypted
My attempts to install 20.04 beta desktop or 18.04 LTS netinstall expert
mode with full disk LUKS encryption failed.
1. Tried installing 20.04 Desktop ISO:
- selected manual partitioning
- created a single partition spanning the entire disk
- created a volume for encryption on the partition (LUKS)
Still not fixed in Xenial/16.04LTS.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/617101
Title:
package g15daemon 1.9.5.3-8ubuntu1 failed to install/upgrade: if
g15daemon fails to start
T
Public bug reported:
The fastqc utility requires perl and perl-modules to be installed. It
seems that the current package does not specify such a dependency so it
fails with an error when started and perl/perl-modules are missing.
** Affects: fastqc (Ubuntu)
Importance: Undecided
St
Public bug reported:
The following warning is printed when bringing up network interfaces. It
seems to have no effect on system operation.
[ 17.731877] 8021q: adding VLAN 0 to HW filter on device eth3
[ 17.732141] bonding: bond0: enslaving eth3 as a backup interface with a down
link.
[ 17.
Still getting this bug in Trusty.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1393842
Title:
libvirt does not grant qemu-guest-agent channel perms
To manage notifications about this bug go to:
ht
*** This bug is a duplicate of bug 1642966 ***
https://bugs.launchpad.net/bugs/1642966
Public bug reported:
This is otherwise a duplicate of #1642966, but for a different version
of cups 2.1.3-4ubuntu0.1
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: cups-daemon 2.1.3-4ubuntu0.1
P
Happened right now on Xenial 16.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1302416
Title:
deja-dup monitor was taking 6GB of memory
To manage notifications about this bug go to:
https://bugs
Public bug reported:
When I connect Display Port it does not connect.
xrandr says:
Screen 0: minimum 8 x 8, current 1440 x 900, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VGA1 connected 1440x900
Public bug reported:
Currently, using LZ4 as compression type produces an unbootable system, as lz4
is called without the legacy format option -l, which is required to produce a
kernel readable image.
Also, using lzop there is a very long delay (over one minute) when updating
initramfs, as by d
Any news on fixing the bug?
Yesterday a new version of network-manager 0.9.8.8-0ubuntu7.2 got pushed out,
replacing the version from cschieli's ppa 0.9.8.8-0ubuntu7.1+athome1, causing
the bridges to break once again
--
You received this bug notification because you are a member of Ubuntu
Bugs,
** Changed in: linux (Ubuntu)
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1290110
Title:
Fan stops after resume from suspend leading to overheating; requir
*** This bug is a duplicate of bug 1355732 ***
https://bugs.launchpad.net/bugs/1355732
Public bug reported:
The error occurred when upgrading to 14.04 LTS enablement stack.
ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: virtualbox-dkms 4.1.12-dfsg-2ubuntu0.6
ProcVersionSignature:
I mean the kernel, of course. There is no need to reinstall Ubuntu 14.04
daily (in fact it would be pointless as the bug is still there). I've
had it since alpha and it works fine with kernel 3.15-rc6 installed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
For me this bug is definitely fixed in 3.15-rc6, and AFAIK from this release
onwards, so daily build of mainline should also work. Of course the patch is
not yet backported, which it urgently must be. For now just install latest
mainline from instructions on Ubuntu wiki.
If there is still a faul
The bug is fixed in 3.15-rc6. The patch is at
https://patchwork.kernel.org/patch/4124871/ and a patch adapted for
3.14.4 is here: https://bugzilla.kernel.org/attachment.cgi?id=136881
A backport to 3.13 is needed for it to get into Trusty AFAIK...
--
You received this bug notification because you
** Tags removed: kernel-bug-exists-upstream kernel-bug-reported-upstream
** Tags added: kernel-fixed-upstream kernel-fixed-upstream-3.15-rc6
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1290110
Title
Changed URL to HTTPS
** Bug watch added: Linux Kernel Bug Tracker #71711
http://bugzilla.kernel.org/show_bug.cgi?id=71711
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1290110
Title:
Fan stops a
** Bug watch added: Linux Kernel Bug Tracker #71711
http://bugzilla.kernel.org/show_bug.cgi?id=71711
** Also affects: linux via
http://bugzilla.kernel.org/show_bug.cgi?id=71711
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of U
** Tags added: kernel-bug-reported-upstream
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1290110
Title:
Fan stops after resume from suspend leading to overheating; requires
reboot to fix [HP Prob
I have the same problem, but oddly enough in Chromium - LibreOffice is OK. So I
don't think this is related to LibreOffice.
This only happens when maximised.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
Hi,
I haven't had any problems with wireless for a while now... I think things just
started working after a upgrade a bit after I posted this bug. I can't remember
when exactly it was (maybe a couple of months).
So if you're having problems, I suggest you open a new bug...
--
You received this
Thank you. I will report the bug upstream.
I have done a bit of investigation on which cooling devices correspond to
different fan speeds. IMO the cooling device to trip point mappings are wrong
(do not change fan speed linearly with accordance to temperature/trip points).
And I've also found th
Hi,
I've tested the latest mainline kernel (v3.16-rc6-trusty) and the bug is
still present. Also it seems that the fan speed does not change relative
to temperature any more after OS startup.
** Tags added: kernel-bug-exists-upstream
** Changed in: linux (Ubuntu)
Status: Incomplete => Con
** Attachment added: "/sys/class/thermal after resume, fan doesn't work"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1290110/+attachment/4015418/+files/sys-class-thermal-aftersuspend
** Summary changed:
- Fan stops after resume from suspend leading to overheating; requires reboot
to
ux-image-3.13.0-16-generic 3.13.0-16.36 [modified:
boot/vmlinuz-3.13.0-16-generic]
ProcVersionSignature: Ubuntu 3.13.0-16.36-generic 3.13.5
Uname: Linux 3.13.0-16-generic x86_64
ApportVersion: 2.13.3-0ubuntu1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1:
Exact same problem here. Only APT is set to use the proxy in
/etc/apt/apt.conf.d/01proxy:
Acquire::http::Proxy "http://apt-cacher.lan:3142/";;
System-wide proxy is disabled.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs
Public bug reported:
Downloaded amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip,
created deb packages:
./amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.run --buildpkg
Ubuntu/saucy
Output of dpkg when I tried to install fglrx_8.970-0ubuntu1_amd64.deb
Setting up fglrx (
Also relevant:
http://www.mail-archive.com/nut-upsuser@lists.alioth.debian.org/msg07865.html
Looks like I'll need a newer version of NUT anyway...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1197878
I am confirming HW compatibility for AP9619 (AP9617, AP9618, AP9619
series).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1197878
Title:
SNMPv3 not working with APC
To manage notifications about t
Sorry, but these cards don't support AES, only DES
(AP9617,AP9618,AP9619).
I have managed to fix the communication problem by using simple passwords
without any special characters.
upsdrvctl still outputs some unhandled ASNs, but it seems to have no influence
on NUT working.
This is with mibs =
I have monitor with resolution 1920x1080.
If I change client resolution to: Custom 1919x1079 then the problem goes away.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1223814
Title:
Full screen hide
** Tags added: saucy
** Tags added: amd64
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1223814
Title:
Full screen hides status bar on Gnome Classic (Gnome Fallback)
To manage notifications about
Public bug reported:
1)
ubuntu:
Description:Ubuntu Saucy Salamander (development branch)
Release:13.10
2)
remmina:
Installed: 1.0.0-4ubuntu3
Candidate: 1.0.0-4ubuntu3
Version table:
*** 1.0.0-4ubuntu3 0
500 http://si.archive.ubuntu.com/ubuntu/ saucy/main amd64 Packages
Per local project fix: manually copying definitions to your .pro file
from /usr/share/qt4/mkspecs/features/extserialport.prf:
INCLUDEPATH += /usr/include/qt4/QtExtSerialPort
LIBS += -l$$qextLibraryName(qextserialport)
DEFINES += QEXTSERIALPORT_USING_SHARED
And change them to:
INCLUDEPATH += /usr
After some digging I found someone having an identical problem on the
nut-upsdev mailing lists:
http://www.mail-archive.com/nut-upsdev@lists.alioth.debian.org/msg03451.html
The problem was ultimately not resolved, hence I deem that the status could be
elevated to Confirmed.
--
You received thi
Here is the output when mibs=auto (tried also with no mibs= line in
ups.conf, but the output is the same):
/lib/nut/snmp-ups -a ups1 -DDD
Network UPS Tools - Generic SNMP UPS driver 0.58 (2.6.3)
0.00 debug level is '3'
0.001183 SNMP UPS driver : entering upsdrv_initups()
0.001
Public bug reported:
I'm trying to connect to an AP9619 management card with SNMPv3 authPriv,
but the snmp-ups driver fails to start.
When running the driver directly:
$ sudo /lib/nut/snmp-ups -a ups1 -DDD
Network UPS Tools - Generic SNMP UPS driver 0.58 (2.6.3)
http://h2.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=3559651&prodTypeId=18964&objectID=c01476873
This is the config recommended by HP for our SAN (2000 series is down there),
mine is functionally the same. There is no way to sense the priorities of th
Thank you for your help. I wasn't aware of the limitation
(incompatibility) caused by co-deploying LVM and multipath, it was my
assumption that multipath would be configured to take precedence over
LVM for having PVs on multipath block devices, as having it the other
way around, as in multiple path
Public bug reported:
I have a SAN connected via a dual-port HBA that I'm trying to get to
work with multipath.
I'm running 12.04.2 installed via netboot (clean install).
Setup options: partitioning=guided with LVM (onto internal DRAC 6/i RAID)
packages=Basic server,OpenSSH,Virtual machine host
** Attachment added: "udev log"
https://bugs.launchpad.net/ubuntu/+source/multipath-tools/+bug/1178721/+attachment/3672267/+files/udev.multipath-BROKEN
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
@Jason
tnx for posting the solution. I've upgraded recently to 12.10 from 12.04 and
had the same problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1071918
Title:
python-tables depends on missi
I was plugged in when trying, not on battery, and it can be seen from
lspci that power management is/was off ... (power supply state doesn't
change this). It should work regardless, a netbook with no working
wireless when on battery wouldn't be really useful :)
--
You received this bug notificati
This seems like a problem with DHCP (this is on an unencrypted network):
Oct 9 12:07:32 acer dhclient: Internet Systems Consortium DHCP Client
4.1-ESV-R4
Oct 9 12:07:32 acer dhclient: Copyright 2004-2011 Internet Systems Consortium.
Oct 9 12:07:32 acer dhclient: All rights reserved.
Oct 9 12:
** Description changed:
When trying to connect to almost any wireless network, it never connects, the
indicator just keeps moving until it says Disconnected a minute or so later.
This happens 100% of the time with all encryped networks, and 99% of the time
with unencrypted networks. I have so
** Attachment added: "Syslog snippet with relevant log output"
https://bugs.launchpad.net/bugs/1063445/+attachment/3384090/+files/syslog.snip
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1063445
Public bug reported:
When trying to connect to almost any wireless network, it never connects, the
indicator just keeps moving until it says Disconnected a minute or so later.
This happens 100% of the time with all encryped networks, and 99% of the time
with unencrypted networks. I have so far
Even if external "default" monitor is misdetected, that just means that
in worse case scenario the laptop will suspend even if external monitor
is plugged in - which is still noticably less problematic for hardware
(and confusing) than staying on even if "suspend on lid close" is
selected.
--
You
*** This bug is a duplicate of bug 949296 ***
https://bugs.launchpad.net/bugs/949296
** This bug has been marked a duplicate of bug 949296
gnome-settings-daemon always prevents suspend when proprietary nvidia
drivers are used.
--
You received this bug notification because you are a membe
*** This bug is a duplicate of bug 949296 ***
https://bugs.launchpad.net/bugs/949296
** This bug is no longer a duplicate of bug 951479
Laptop with nvidia binary drivers does not suspend when lid is closed
** This bug has been marked a duplicate of bug 949296
gnome-settings-daemon always
This also happens on my Dell M1330 and is a regression since 11.10 - it
is a serious issue since I noticed this as I pulled completely
overheated laptop with dead battery out of a bag.
I strongly suggest fixing this before release of 12.04.
--
You received this bug notification because you are a
*** This bug is a duplicate of bug 951479 ***
https://bugs.launchpad.net/bugs/951479
This is a duplicate of more general bug
https://bugs.launchpad.net/ubuntu/+source/gnome-desktop3/+bug/951479
** This bug has been marked a duplicate of bug 951479
Laptop with nvidia binary drivers does not
Confirming that on 11.10 the brightness levels jump THREE levels.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720912
Title:
Maverick regression: Dell M1330 backlight brightness messed up
To manag
** Changed in: network-manager-vpnc (Ubuntu)
Status: Incomplete => New
--
network-manager-vpnc produces incorrect routing table
https://bugs.launchpad.net/bugs/364844
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Description changed:
Binary package hint: network-manager-vpnc
I'm using the following versions:
network-manager0.7.1~rc4.1.cf199a964-0ubuntu2
network-manager-vpnc 0.7.1~rc4.20090316+bzr21-0ubuntu2
vpnc 0.5.3-1
Logging into the same cis
I've pasted wrong result for network manager. It should be:
>From network manager:
u...@ubuntu:~$ sudo netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.10.10.1 255.255.255.255 UGH 0 0 0 wlan0
10.15.107.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
10.10.10.0
** Description changed:
Binary package hint: network-manager-vpnc
I'm using the following versions:
network-manager0.7.1~rc4.1.cf199a964-0ubuntu2
network-manager-vpnc 0.7.1~rc4.20090316+bzr21-0ubuntu2
vpnc 0.5.3-1
Logging into the same cis
Public bug reported:
Binary package hint: network-manager-vpnc
I'm using the following versions:
network-manager0.7.1~rc4.1.cf199a964-0ubuntu2
network-manager-vpnc 0.7.1~rc4.20090316+bzr21-0ubuntu2
vpnc 0.5.3-1
Logging into the same cisco concentrator pro
Same problems here.
Well... I mean, it`s not like it`s some stupid GUI bug... How can you be
serious about the server market?
--
Ubuntu 2.6.27-11.27-generic no cpuscaling-Error inserting acpi_cpufreq
https://bugs.launchpad.net/bugs/332846
You received this bug notification because you are a memb
With the Scintilla went auto completion. Definite not a wishlist
thing...
--
Anjuta (intrepid) package lacks of plugins
https://bugs.launchpad.net/bugs/282160
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
u
Same here:
qemu 0.9.x detected, using 0.9 command set
Exception in thread Thread-9:
Traceback (most recent call last):
File "/usr/lib/python2.5/threading.py", line 486, in __bootstrap_inner
self.run()
File "/usr/share/qemulator/qml_controlmon.py", line 167, in run
self.preload_gui()
Found the solution. In /etc/ssh/sshd the following settings must be set:
UsePAM yes
ChallengeResponseAuthentication no
$sudo /etc/init.d/ssh restart
logout
login
That`s it.
--
Increase ulimit -n
https://bugs.launchpad.net/bugs/283823
You received this bug notification because you are a member
It seems that when local logging in all is fine. The problem is when I
log in through ssh.
--
Increase ulimit -n
https://bugs.launchpad.net/bugs/283823
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-b
@Nicolas Clementz
Did not work. It is still the same:
$ulimit -n
1024
$ cat /proc/sys/fs/file-max
65535
--
Increase ulimit -n
https://bugs.launchpad.net/bugs/283823
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailin
I use nxclient. So the pam service would be sshd I guess.
So basically you moved the @include... line after the pam_mail.so line.
I will try it tomorrow when I have acces to the server.
Um.. where/how did you find this solution? Where is it documented?
Not that I`m complaining about Ubuntu but
Forgot to mention that I also tryied in /etc/security/limits.conf:
"* hard nofile 65500" with same result.
--
Increase ulimit -n
https://bugs.launchpad.net/bugs/283823
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs maili
Public bug reported:
1. 2.6.24-19-server, last updates applied
2. don`t know responsible package
3. In /etc/security/limits.conf:
myuser hard nofile 65500
4. After reboot:
$ulimit -n
1024
I attempted various methods to change ulimits -n permanently. So on forums I
read that following should
I installed linux-image-2.6.27-1-generic via Synaptic. The results are
the same as with 2.6.24-19-generic. I even updated acpid and
restarted it but no effect. The temperatures are:
- after the boot (on-demand governor, showing 600MHz):
$ cat /proc/acpi/thermal_zone/THRS/temperature
temperature:
** Attachment added: "lspci-vvnn.log"
http://launchpadlibrarian.net/16671518/lspci-vvnn.log
--
laptop overheating
https://bugs.launchpad.net/bugs/256299
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubu
** Attachment added: "dmesg.log"
http://launchpadlibrarian.net/16671493/dmesg.log
--
laptop overheating
https://bugs.launchpad.net/bugs/256299
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@l
** Attachment added: "lsmod"
http://launchpadlibrarian.net/16671342/lsmod
--
laptop overheating
https://bugs.launchpad.net/bugs/256299
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubu
Public bug reported:
1.lsb_release -rd:
Description:Ubuntu 8.04.1
Release:8.04
uname -a:
2.6.24-19-generic #1 SMP Fri Jul 11 23:41:49 UTC 2008 i686 GNU/Linux
2. Mozilla Firefox 3.0.1, Copyright (c) 1998 - 2008 mozilla.org
and
cpufrequtils 002: cpufreq-info (C) Dominik Brodowski 20
I would like to add that after loading kvm-intel during guest runtime,
the compilation now succeeded.
--
kvm Xubuntu guest freeze compiling
https://bugs.launchpad.net/bugs/242960
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu
Public bug reported:
Binary package hint: kvm
When compiling kernel in kvm guest Xubuntu, it freezes in the middle of
the compilation. When trying to pause/resume the guest in virt-manager,
virt-manager stops responding.
Host:
$ lsb_release -rd
Description:Ubuntu 8.04
Release:8.04
$
** Attachment added: "dmesg"
http://launchpadlibrarian.net/15579928/dmesg
--
kvm Xubuntu guest freeze compiling
https://bugs.launchpad.net/bugs/242960
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubunt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/14236774/Dependencies.txt
** Attachment added: "pluginreg.dat.txt"
http://launchpadlibrarian.net/14236775/pluginreg.dat.txt
** Attachment added: "profiles.ini.txt"
http://launchpadlibrarian.net/14236776/profiles.ini.t
Public bug reported:
Binary package hint: firefox-3.0
my system: Ubuntu 8.04 Hardy Haeron + Firefox 3.0b5
what happened:
When I close a popup window, all instances of firefox close. It happens when I
exit firefox and then restore my opened tabs. That also opened popup window,
which by closing
80 matches
Mail list logo
