faulted
zfs scrub
zfs add old-rpool old new
|???|
|Then I do not have to copy anyyhing ???
|
||
joni
Richard Laager kirjoitti 3.12.2020 klo 23.29:
> device_removal only works if you can import the pool normally. That is
> what you should have used after you accidentally added the secon
Do you mean this feature which is comi ng,... when ?
https://github.com/openzfs/openzfs/pull/251
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1906542
Title:
echo 1 >>
root@jonipekka-desktop:~# zpool import
pool: rpool
id: 5077426391014001687
state: UNAVAIL
status: One or more devices are faulted.
action: The pool cannot be imported due to damaged devices or data.
config:
rpoolUNAVAIL insufficient
new device_removal feature ,... where it is ? It might work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1906542
Title:
echo 1 >> /sys/module/zfs/parameters/zfs_max_missing_tvds says
,... so there
is many files
i realy need,...
joni
Richard Laager kirjoitti 3.12.2020 klo 18.38:
> Why is the second disk missing? If you accidentally added it and ended
> up with a striped pool, as long as both disks are connected, you can
> import the pool normally. Then use the new devic
Is there anyone who could help me over go this bug so I can rescue my ZFS pool
data,
pool will be lost as I understand. I accidentaly added disk to pool and not as
mirror
what was intention,... and it can nor be removed even there is no data!
--
You received this bug notification because you
Public bug reported:
root@jonipekka-desktop:~# echo 1 >>
/sys/module/zfs/parameters/zfs_max_missing_tvds
-bash: /sys/module/zfs/parameters/zfs_max_missing_tvds: Permission denied
root@jonipekka-desktop:~#
https://www.delphix.com/blog/openzfs-pool-import-recovery
Import with missing top level
Public bug reported:
-
ProblemType: Bug
DistroRelease: Ubuntu 20.10
Package: ubiquity 20.10.13
ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14
Uname: Linux 5.8.0-25-generic x86_64
NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair
ApportVersion: 2.20.11-0ubuntu50
Architecture:
Public bug reported:
lsb_release -rd
Description:Ubuntu 16.04.6 LTS
Release:16.04
While running distribution upgrade from 14.04 to 16.04, the terminal
reported too many errors during upgrade and your system may be in an
unusable state.
Took a look here:
Public bug reported:
Ubuntu 18.04
ProblemType: Package
DistroRelease: Ubuntu 18.04
Package: gnome-menus 3.13.3-11ubuntu1
ProcVersionSignature: Ubuntu 4.13.0-32.35-generic 4.13.13
Uname: Linux 4.13.0-32-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 2.20.8-0ubuntu8
Architecture: amd64
This would seem to happen because start-pulseaudio-x11 tries to load
module-device-manager that unfortunately conflicts with module-switch-
on-connect.
https://bugs.freedesktop.org/show_bug.cgi?id=95104
** Bug watch added: freedesktop.org Bugzilla #95104
Public bug reported:
installed Ubuntu 16.04 and it seems to me something went wrong in the
installation or I choose wrong...
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: tex-common 6.04
ProcVersionSignature: Ubuntu 4.4.0-45.66-generic 4.4.21
Uname: Linux 4.4.0-45-generic x86_64
Public bug reported:
Ubuntu Xenial Xerus (development branch)
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: openjdk-9-jdk 9~b102-1
ProcVersionSignature: Ubuntu 4.4.0-8.23-generic 4.4.2
Uname: Linux 4.4.0-8-generic x86_64
ApportVersion: 2.20-0ubuntu3
Architecture: amd64
Date: Sun Feb
I can confirm that ethtool -K eth0 sg off did correct bacula backup problem:
-bacula-sd - bacula-fd communication error that stops backup process
saying Error: bsock.c:427 Write error sending reset by peer
-so far no IPV6 trafic jam's whit aiccu, but single missing packet's
should not stop
Crazy idea, could there be situations when sender increases mtu over receiver
side?
Fundamental question, I tried to understan what ethtool -K eth0 sg off dose in
protocoll level
can anyone explain, it look's medicine at moment.
--
You received this bug notification because you are a member
hi,
I have had two mysteriouse problem's, bacula stop's and says as reason
connecyion lost due too big packets's ( tried to cange mtu no success)
second have been aiccu that dose not recover time to time after
connection get up againg, need's service stop start,...
I just gave sudo ethtool -K
Fix at 14.04 as well please!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239029
Title:
Please add build-dep on libmjpegtools-dev for mplex plugin
To manage notifications about this bug go to:
Yes, 14.04, Brasero can not found even installed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1239029
Title:
Please add build-dep on libmjpegtools-dev for mplex plugin
To manage notifications
** Changed in: blcr (Ubuntu)
Status: New = Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1357795
Title:
gnuradio dose not work 14.04 libboost1.48 requested
To manage
I have been running blcr beta version whitout crashes,... not tested full
functionality yet.
Probelm fixed and waiting 0.8.6
** Changed in: blcr (Ubuntu)
Status: Confirmed = Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
. nlcd,... ext kept system looking good, after them did not
provided UID's I got first error messages to REGONIZE THE PROBLEM!!!
SORRYU FOR INCONVINIENCE it's just it looked missing library,...
joni
** Changed in: libav (Ubuntu)
Status: New = Invalid
--
You received this bug notification
requests and
due DNS had not answers I configured BIND9 to publish all kerberos
service addresses.
I have NFS + MIT kerberos client and apacheDS LDAP + KERBEROS server
there is no addministration address at kerberos.
joni
--
You received this bug notification because you are a member of Ubuntu
requests and
due DNS had not answers I configured BIND9 to publish all kerberos
service addresses.
I have NFS + MIT kerberos client and apacheDS LDAP + KERBEROS server
there is no addministration address at kerberos.
joni
** Changed in: ubuntu-release-upgrader (Ubuntu)
Status: New = Fix
Tried to use propose but kernel 13.63 was last no 64 !!!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365869
Title:
After upgrade to 3.13.0-35.62, rpc.gssd complains about missing
principal should work,...
sudo kinit -k -t /etc/krb5.keytab nfs/mpi1.kurrola.dy...@kurrola.fi
Client:
MIT: kerberos client
joni@kaak:~$ sudo mount -a
mount.nfs4: access denied by server while mounting mpi1.kurrola.dy.fi:/
and log says at client:
Sep 24 18:37:53 kaak sudo: joni : problem
/clntXX/info: No such file or directory
Sep 24 18:33:23 mpi1 rpc.gssd[1176]: ERROR: failed to read service info
This is OK whit server, so principal should work,...
sudo kinit -k -t /etc/krb5.keytab nfs/mpi1.kurrola.dy...@kurrola.fi
Client:
MIT: kerberos client
joni@kaak:~$ sudo mount -a
mount.nfs4
*** This bug is a duplicate of bug 1241425 ***
https://bugs.launchpad.net/bugs/1241425
https://bugs.debian.org/cgi-
bin/bugreport.cgi?msg=10;filename=php5.5-compatibility.patch;att=1;bug=710854
In my brief testing the patch linked to above seemed to fix both
problems.
RESULTS TO:
Fatal
It's high level bug at opelapd,... openlapd should prevent all access to
files that can be manipulated correctly only trough openlapd tool's by
owning all rights to file's,... even opening (no changes nade) openlapd
file whit gedit will detroy CRC ! For same reason I give only access to
backup
It's high level bug at opelapd,... openlapd should prevent all access to
files that can be manipulated correctly only trough openlapd tool's by
owning all rights to file's,... even opening (no changes nade) openlapd
file whit gedit will detroy CRC ! For same reason I give only access to
backup
Public bug reported:
After installation + adding via webmin Client Users and Groups two users that
work
after installation.
Booted computer and lapd did not work.
Log:
Aug 21 00:41:33 mpi1 slapd[13499]: ldif_read_file: checksum error on
/etc/ldap/slapd.d/cn=config/olcDatabase={1}hdb.ldif
Public bug reported:
After installation + adding via webmin Client Users and Groups two users that
work
after installation.
Booted computer and lapd did not work.
Log:
Aug 21 00:41:33 mpi1 slapd[13499]: ldif_read_file: checksum error on
/etc/ldap/slapd.d/cn=config/olcDatabase={1}hdb.ldif
I have still one machien not solved,...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1289047
Title:
[Trusty] hostapd package is broken
To manage notifications about this bug go to:
hi,
Upgraded from 12.04 to 14.04 and lost wlan0,...
but problem was at configuration, I forget from interfaces,
iface wlan0 inet manual
pre-up iw dev wlan0 set type __ap
hostapd /etc/hostapd/hostapd.conf
two last lines !
my hostapd.conf :
interface=wlan0
bridge=br0
Public bug reported:
Tried to install gnuradio.
It install's but it complains due it can not find libboos -1.48.0.so ,
it can not due 14.04 I got libboost 1.54.0 and 1.55.0
It could be that doing symlinks could workout as emergency repair
but still eighter new packing or copilation
Public bug reported:
apt-cacher-ng can freeze / JAM if more than one machines are upgradeing
from 12.04 to 14.04.
Machine which is in upgrade can jam/freeze also, for ever, also
file lock's remains and those are bit hard to find due sudo update-manager -d
dose not complain all locks. apt-get
update-manger can freeze whit apt-cacher-ng.
Getting started again is not straight foward
I have still one machine in jam, can not get upgardeing,
it hangs while calculating installation
Useing 02proxy setting. apt-cacher.ng is at allready
updated server.
--
You received this bug notification
*** This bug is a duplicate of bug 1289083 ***
https://bugs.launchpad.net/bugs/1289083
blcr software dose not support current, new, kernels above 3.7 according
berkley laboratoryes,... so I'am wondering how it can be in distribution
at 14.04,... has someone done private patch ???
--
You
Public bug reported:
Hardware: AsRock 990 FX
fstab:
/boot/efi
root@mpi1:/home/joni# efibootmgr --create --part 1 --label Ubuntu Trusty EFI
--loader '\boot\efi\EFI\ubuntu\vmlinuz-3.13.0-32-generic.efi.signed'
BootCurrent:
Timeout: 2 seconds
BootOrder: 0002,,0006,0003,0001
Boot
WHERE IS THE FIX
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1289083
Title:
blcr-dkms 0.8.5-2.1: blcr kernel module failed to build [configure:
error: Kernel source is configured uni-processor
Installing blcr from distribution is not allways an FIX,... at 12.04 it did not
work at all,.. i will try blcr distributed whit ubuntu know and try to remeber
to give note if it works,... mpich from distribution did work out at my
installation so it's from sources,..
--
You received this bug
Distribution version of blcr ( most likely a stub that only satisfies
compilation depencyes but not functional ) made possible to compile programs.
Acccording software programmers it's not redy for kernels newer 3.7 so it
should not be used until done. So THERE IS NO FIX, you can compile
hi,
--- Comment #1 from Paul H. Hargrove Xlbl.gov 2014-08-02 03:36:20 ---
Joni,
BLCR still does not support any Linux kernel versions newer than 3.7.1.
So, the error message you see for a 3.13.x kernel is not significant in any
way.
Most likely something has changed in how to identify an SMP
hi,
this is rather old case.
If I correctly remeber, part of package was older,
compatibelity problem,... sorr do not remember exactly,
but it was pacjage content,...
Also I'am useing apt-cacher so it can be more complex
problem !
joni
29.01.2014 20:56, Mario Limonciello kirjoitti:
Can you
randomly at day,... ppp0
up down transition, could it stop aiccu working?
joni
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1261653
Title:
aiccu can not route, looses route
To manage notifications
Hi,
Have same problem 3 almost identical machines and one outdated server as
well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1265035
Title:
gkremld causes system to restart immediately after
Public bug reported:
Computer restart after suspend or shutdown,
it can also hang while shutdown.
Removeing gkremld server removed problem.
Enviroment:
Ubuntu 12.4 precise, latest
Mother Board AsRock FX990
AMD FX 8510
yours,
joni
Description:Ubuntu 12.04.3 LTS
Release:12.04
joni
Public bug reported:
This might be reason:
https://blueprints.launchpad.net/ubuntu/+spec/spinbutton-adjustment-warnings
joni@mpi2:/media$ sudo nano /etc/bacula/tray-monitor.conf
joni@mpi2:/media$ bacula-tray-monitor -c /etc/bacula/tray-monitor.conf
(bacula-tray-monitor:22255): Gtk-WARNING
So, I do not see difrence at sixxs interface after restarting aiccu, sixxs
interface
repair's, resets somthing at kernel routing,... correct ???
It can be incoming packets are not coming to ping6 even PC receives,...
ping6 out put is here :
joni@mpi2:~$ ping6 ipv6.google.com
PING ipv6
I do next dump both IPV6 and IPV4 trafic if that brings more!
Any other ideas,... let's wait when IPV6 drops again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1261653
Title:
aiccu can not route,
tcpdump:
- IPÅV6 dispeared
- started tcpdump
- ping6 ipv6.google.com started
joni@mpi2:~$ sudo tcpdump -i sixxs
Password:
tcpdump: WARNING: sixxs: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on sixxs, link-type RAW (Raw IP
Public bug reported:
ISP here at Finland has run out IPV4 but dose not offer IPV6 eighter,
customers are held behind NAT and changeing IPV4 address plus
at 4G Radio network they change conction between 2G - 3G - 4G
modes continously so packet's can be lost and timeing can be tricky!!!
You can
Technical detail is that fact operator changes IP time to time as well
there can missing pacets due operator switches radio mode of conection
between GRPS-UMTS-HSPA,
If I do not restart aiccu connection dose not come back but if
do restart then it comes back immediately.
Software:
is workin both directions,...
ANY IDEAS HOW TO TEST THAT OPERATOR IS NOT
DISTURBIN AYIA / AICCU ???
joni@mpi2:~$ sudo cat /etc/aiccu.conf
Password:
# Under control from debconf, please use 'dpkg-reconfigure aiccu' to reconfigure
# AICCU Configuration
# Login information (defaults: none)
username
kernel ipv6 rounting and not aiccu???
I have done all needed steps to get IPV6 work ( fowarding statement,
shorewall6, dhcp6 and bind )
,.. but it works only internaly at router PC which has services useing IPV6
like posix, apache
joni
--
You received this bug notification because you
once a day, twice a day,... basically I use IPV4 from intranet so can
I can not note when it happens,...
Yes, ntps,...
I mean protocol level timeing, response time, missing packets,...
Basically aiccu should not change iptables, and shorewall dose it
only ones when it have started,...,... there
Public bug reported:
sudo -u mythtv mythbackend
2013-12-13 21:48:22.612144 C Application binary version (0.25.20120408-1) does
not match libraries (0.25.20120506-1)
2013-12-13 21:48:22.612148 W This application is not compatible with the
installed MythTV libraries. Please recompile after a
Solution was to download correct package from precise-updates,... but still
packges should be compatible from same source.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1260844
Title:
Mythtv
Public bug reported:
install failure, dose not complete installation:
joni@mpi1:~$ sudo apt-get install isc-dhcp-server
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu
Luetaan tilatiedot... Valmis
Seuraavat ylimääräiset paketit on merkitty asennettaviksi
Bug report from upstream shows the issue has just been fixed:
http://sourceware.org/bugzilla/show_bug.cgi?id=15415
** Bug watch added: Sourceware.org Bugzilla #15415
http://sourceware.org/bugzilla/show_bug.cgi?id=15415
--
You received this bug notification because you are a member of Ubuntu
Solution found, due problem's decode some DVB there was updated install that
affected
such way that pulseaudio was upgraded 1.2 version.
Downgardeing all audio drivers, libraryes to 1.1:15 solved problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
hi,
http://www.alsa-
project.org/db/?f=fa22eb1eba1ad1132fd9671a304d509e54f7e63c
-updated jut today two machimes and lost audio,
those have installed as workstation but all apcakahes are updated
two week's ago to same as at server
-update did not mix server'e
hi,
WakeOnLan works only from suspend state. That work's most cases.
Realted: -acpi
LTSP workstation can not be ken up from suspend state.
joni
** Package changed: linux (Ubuntu) = acpi
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Description changed:
-
hi,
http://www.alsa-
project.org/db/?f=fa22eb1eba1ad1132fd9671a304d509e54f7e63c
- -updated jut today two machimes and lost audio,
- those have installed as workstation but all apcakahes are updated
- two week's ago to same as at server
+ -updated
joni@ mpi1: ssh ugh
Kerätyt tiedot voidaan lähettää kehittäjille ohjelman parantamiseksi.
Tähän voi mennä muutama minuutti.
*** PulseAudio seems to have crashed. Do you wish to report a bug?
ubuntu-bug -s audio
Kuinka haluat edetä? Vaihtoehdot ovat:
Y: Yes
N: No
P: Peruuta
Ole hyvä
Tried several time, i try tomorrow at machine, now it was trough ssh,
also tried:
/apport-cli -f -p /package name/--save bug.apport/
/ubuntu-bug -c //bug.apport
===
/
24.04.2013 21:32, Fabio Marconi kirjoitti:
ubuntu-bug -s audio
--
Joni-Pekka Kurronen
AMRINA, Insinööri AMK veneala
,...
and diabled all :
joni@mpi1:/mpi3$ cat /proc/acpi/wakeup
Device S-state Status Sysfs node
PC02 S4*disabled pci::00:02.0
PC04 S4*disabled
PC05 S4*disabled pci::00:05.0
PC06 S4*disabled
PC09 S4*disabled
PC0A S4*disabled pci::00:0a.0
I can confirm the bug on 64-bit 12.10. In addition of the pulseaudio not
working, the networking is also down until I unplug the webcam, so there
might be bug at the kernel level also.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Lsusb attached. Here's the syslog errors from my daily morning routine
of resume from suspend-unplug the webcam-plug in the webcam:
Jan 18 08:28:39 kernel: [209487.968197] 15:3:4: cannot set freq 48000 to ep
0x86
Jan 18 08:28:40 kernel: [209488.968198] 15:3:4: cannot set freq 48000 to ep
0x86
ideas's:
-could it be driver ?
** Changed in: linux (Ubuntu)
Status: Expired = New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
wake on lan dose not work
To manage
me that
I do not see small errors.
This case I got uncorrect information.
But what you write 200% true, thanks paul
i will download test expreimental version!!!
Experimental version did not work at my machine
also removing it was painful !
joni
===
#ubuntu 12.4 LTS
sudo apt-get
There is NO FIX !!! Going back in kernels is NOT A FIX !
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/804943
Title:
blcr kernel module failed to build with kernel 3.0 : configure: error:
NOT FIXED
N OF I X
CHANGE STATUS - NOT FIXED
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/804943
Title:
blcr kernel module failed to build with kernel 3.0 : configure: error:
https://upc-bugs.lbl.gov/blcr/doc/html/BLCR_Admin_Guide.html
Berkeley Lab Checkpoint/Restart (BLCR) Administrator's Guide
This guide describes how to install, configure, and maintain Berkeley Lab
Checkpoint/Restart (BLCR) for Linux. For usage instructions please see the
companion BLCR User's
We need new status, Product Not Compatible,
there is no solution to problem until someone dose new blcr version,...
Having blcr-* packages at distribution is miss leading and those should be
removed
from ditribution OR CLEARLY MARKED AS:
UN-FUNCTIONAL, package held to keep
Same here whit 12.5 LTS 64 bit,... but it's anoying
that syslog fill's whit below shit,...
=
Dec 2 23:28:14 kurrola kernel: [28963.624076] Unknown OutputIN= OUT=lxcbr0
SRC=10.0.3.1 DST=10.0.3.255 LEN=316 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP
SPT=631 DPT=631 LEN=296
Dec 2 23:28:21
** Attachment added: _bin_bash.1000.crash
https://bugs.launchpad.net/ubuntu/+source/glib2.0/+bug/1033433/+attachment/3371581/+files/_bin_bash.1000.crash
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Have tried re-insattaltion,, ext, problem is still there,
have not time to learn gdb but if get instruction I can test,...
debian realted forum's give's glue that could be broken gconf
and sugget rebuilding database whit gconf-rebuild,... and script/software
can's find from ubuntu
Public bug reported:
Raw outputs (terminal output looks the same for both but programs get it
wrong):
10.04.4:
September 2012
Su Mo Tu We Th Fr Sa
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30
12.04:
September 2012
Su Mo Tu We Th
: joni 2380 F pulseaudio
+ /dev/snd/controlC1: joni 2380 F pulseaudio
+ /dev/snd/controlC0: joni 2380 F pulseaudio
+ CRDA: Error: [Errno 2] No such file or directory
+ Card0.Amixer.info:
+ Card hw:0 'SB'/'HDA ATI SB at 0xfe30 irq 16'
+Mixer name : 'Realtek
apport information
** Attachment added: AlsaDevices.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321971/+files/AlsaDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: ProcEnviron.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321984/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: ProcInterrupts.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321985/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: Card1.Codecs.codec.0.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321978/+files/Card1.Codecs.codec.0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: Lspci.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321980/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
wake
apport information
** Attachment added: UdevDb.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321988/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
apport information
** Attachment added: PulseList.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321987/+files/PulseList.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: PciMultimedia.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321982/+files/PciMultimedia.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: ProcCpuinfo.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321983/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: Card0.Codecs.codec.0.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321976/+files/Card0.Codecs.codec.0.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: UdevLog.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321989/+files/UdevLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
apport information
** Attachment added: WifiSyslog.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321990/+files/WifiSyslog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: BootDmesg.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321974/+files/BootDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: Card1.Amixer.values.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321977/+files/Card1.Amixer.values.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: ArecordDevices.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321973/+files/ArecordDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: Lsusb.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321981/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
Title:
wake
apport information
** Attachment added: ProcModules.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321986/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: AplayDevices.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321972/+files/AplayDevices.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
apport information
** Attachment added: Card0.Amixer.values.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321975/+files/Card0.Amixer.values.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
apport information
** Attachment added: CurrentDmesg.txt
https://bugs.launchpad.net/bugs/1051325/+attachment/3321979/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1051325
,...
https://bugs.launchpad.net/bugs/1051325
.., but those did not work out eighter.
yours,
joni
17.09.2012 20.59.37, Joseph Salisbury kirjoitti:
Would it be possible for you to test the latest upstream kernel?
Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the
latest
1 - 100 of 274 matches
Mail list logo