No, I have rebooted with 2.6.31-19 and no sound.
But a few days ago I had sound (I suppose with -19) and I have not
changed anything of the configuration since then.
I only have installed the alsa-backport modules and the PPA from Ubuntu
Audio Development Team (with no luck).
--
No sound in
:
USERPID ACCESS COMMAND
/dev/snd/controlC0: jordi 2267 F pulseaudio
jordi 2273 F kmix
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xf9ff8000 irq 30'
Mixer name : 'Realtek ALC1200'
Components : 'HDA:10ec0888,104382fe,00100101
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/40359292/AlsaDevices.txt
** Attachment added: AplayDevices.txt
http://launchpadlibrarian.net/40359293/AplayDevices.txt
** Attachment added: ArecordDevices.txt
http://launchpadlibrarian.net/40359294/ArecordDevices.txt
I have already tried linux-backports-modules-alsa-karmic-generic and the
PPA from Ubuntu Audio Development Team with no luck.
--
No sound in Karmic after update to 2.6.31-20
https://bugs.launchpad.net/bugs/533406
You received this bug notification because you are a member of Ubuntu
Bugs, which
Ah, ok. I have been playing with alsamixer a lot and maybe I left that
control muted.
But after unmute the master control I still have no sound.
--
No sound in Karmic after update to 2.6.31-20
https://bugs.launchpad.net/bugs/533406
You received this bug notification because you are a member of
No, I remember that Surround and Center have been always muted even when
the sound was working.
Anyway. I have unmuted both and still no sound.
--
No sound in Karmic after update to 2.6.31-20
https://bugs.launchpad.net/bugs/533406
You received this bug notification because you are a member of
This is the result. It's ok?
jo...@olimpo:~$ pactl stat
Actualmente en uso: 5 bloques conteniendo 195,0 KiB bytes en total.
Ubicados durante a lo largo del tiempo: 83419 bloques conteniendo 925,2 MiB
bytes en total.
Tamaño del cache de muestra: 0 B
Nombre de usuario: jordi
Nombre del equipo
dardack, for the Dansguardian issue, could you please open a new bug?
This bug is getting messed up with a mix of different issues. It seems
Bug#474475 is also related.
** Bug watch added: Banu Bugzilla #81
https://www.banu.com/bugzilla/show_bug.cgi?id=81
** Also affects: tinyproxy via
dardack, can you post the output of tinyproxy -h?
--
Multiple sites will not load or give a compression error message when using
Dansguardian 2.10.1.1 with tinyproxy
https://bugs.launchpad.net/bugs/474475
You received this bug notification because you are a member of Ubuntu
Bugs, which is
dardack, does adding Listen 0.0.0.0 to your config help?
--
Tinyproxy is outdated in Ubuntu Lucid - please include v1.8 (sync from Debian)
https://bugs.launchpad.net/bugs/529877
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Public bug reported:
Binary package hint: openerp-server
Bank Statement Reconciliation fails when an account that has the
Reconcile flag unchecked is included on the statement.
Of course as one account is unchecked, the reconciliation should not be
possible and according to that the system
helped.
Regards.
Jordi.
Kernel 2.6.31-19
GigaByte MA78GM-S2H ( ATI HD3200 )
--
cras ubuntu 9.1, mouse frozen
https://bugs.launchpad.net/bugs/509163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs
For whatever reason you have no tinyproxy.conf installed, thus tinyproxy
won't start.
In 1.8.0-1, available in Debian, the init script tests the availability
of the config file before trying to do anything with it.
Install a tinyproxy.conf file, and you'll be set.
** Changed in: tinyproxy
Does this happen with tinyproxy 1.8.0-1 from Debian unstable? (the
dependencies should not be a problem, you can install it by hand)
** Changed in: tinyproxy (Ubuntu)
Status: New = Incomplete
--
Disc art search bugs out webpages when tinyproxy is installed
Can you post the contents of /etc/init.d/tinyproxy? As far as I know,
tinyproxy does not do that kind of chown, it does a separate chown and
chgrp, so I wonder where that is coming from. Does it fail with the
newer versions in Ubuntu, or with 1.8.0-1 from Debian squeeze/sid?
** Changed in:
How does it fail to work? As Ubuntu will sooner or later get this 1.8.0
version, you might want to help with getting the issue fixed, or you'll
face it again in the future when the package gets upgraded.
--
Disc art search bugs out webpages when tinyproxy is installed
I don't know what you're talking about, to be honest. As far as I can
tell, Lucid has 1.9.6, and Debian has had 1.9.8 for over a week.
Also, it's not great surprise that the GNOME SVN is stale at 1.9.5,
given every GNOME project has moved to Git.
Marking this bug as Invalid.
** Changed in:
Fix released in 1.9.7.
** Changed in: gtranslator
Importance: Unknown = Undecided
** Changed in: gtranslator
Status: Unknown = New
** Changed in: gtranslator
Remote watch: GNOME Bug Tracker #598866 = None
** Changed in: gtranslator
Status: New = Fix Released
--
gtranslator
The PC in which this happened was formatted and now works again with a
Ubuntu Hardy (video works much better and faster than with newer
releases). It hasn't happened again and don't know how to reproduce it:
It occurred after a specific update.
--
[Hardy] After updating desktop fails to
Isn't this a duplicate of #115913, which has a patch attached?
--
Calendar entries created by Evolution on Exchange 2003 do not sync to Nokia
handset
https://bugs.launchpad.net/bugs/309767
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi Pepe,
Thank you for your answer.
I spoke with Belkin about the wifi speed connection, and they answer me that I
change the wifi channel number, but I don't done it.
Yesterday, I was sending a 2GB file from my laptop to the network hard disk,
and the speed was 1.4MBi/s (read from netspeed), I
Hello all,
This is the same that happens to me. In particular:
When I switch on my computer using only the battery, the Battery monitor
on the tray is showing ALWAYS that the battery is fully charged.
However, making a simple click onto the monitor icon, it shows a popup
with the actual
Public bug reported:
I'm an Ubuntu 9.10 64 bits user, and I get a Toshiba A500-141 laptop.
I try to use the IRDA Remote controller (RC6ir), and the Receiver is an ENE CIR
Receiver, model ENE0200.
jo...@jordi-ubuntu:~$ lspnp
00:00 PNP0a08 (unknown)
00:01 ENE0200 (unknown)
00:02 PNP0200 AT DMA
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/37327599/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/37327600/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/37327601/ProcStatus.txt
** Attachment
This bug has been fixed with the import of Nano 2.2.0 to lucid.
** Changed in: nano (Ubuntu)
Status: Confirmed = Fix Released
** Changed in: nano (Ubuntu)
Assignee: (unassigned) = Jordi Mallach (jordi)
--
syntax highlighting in nano should be enabled by default
https
This is fixed in nano 2.2.0.
** Changed in: nano (Ubuntu)
Status: New = Fix Released
--
floating point exception
https://bugs.launchpad.net/bugs/495942
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
As I mentioned earlier, I basically followed
https://help.ubuntu.com/community/Kernel/Compile
as explained in the debian way. The only additional things I had to do
is
- Save the patch at comment #202 of this forum at ~/src
- After cp -vi /boot/config-`uname -r` .config, patch -p1
Thanks for the bug report. I've commited a fix in 2.1+dfsg1-3 for
Debian.
** Also affects: mailutils (Debian)
Importance: Undecided
Status: New
** Changed in: mailutils (Debian)
Status: New = Fix Committed
** Changed in: mailutils (Debian)
Assignee: (unassigned) = Jordi
Does anybody know if the recent ubuntu kernel upgrade fixes the problem?
Otherwise we will have to stick with the patched custom kernel...
--
regression: uvcvideo module makes cannot reset port error on usb with bison
webcam (5986:0203): USB and suspend fails
I report success with the
intel_ehci_periodic_fix.backport_2.6.31.4.patch on the akoya medion mini
(msi wind clone)! I followed
https://help.ubuntu.com/community/Kernel/Compile (the debian way) and
everything worked like a charm. No need to build the restricted modules,
at least on the akoya
Public bug reported:
Binary package hint: gnome-power-manager
When I switch on my computer using only the battery, the Battery monitor
on the tray is showing ALWAYS that the battery is fully charged.
However, making a simple click onto the monitor icon, it shows a popup
with the actual
Great job! Congrats to everybody that has been working on this issue!
:-) :-) :-)
Please forgive my ignorance, but what's the impact of the udelay on
performance. It is really critical to have the delay as small as
possible or it is just one more of many threads running in background
and,
The bug upstream has a new patch to test. Should we test it?
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
I think this is the same as
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/435352
Blacklisting the uvcvideo driver in /etc/modprobe.d/blacklist.conf makes
USB usable again (but does not fix webcam).
--
[Karmic] USB hotplug system doesn't detect anything after boot
This is fixed in 1.0.5-2, uploaded today to Debian unstable.
** Changed in: xqf (Ubuntu)
Status: Triaged = Fix Committed
** Changed in: xqf (Ubuntu)
Assignee: (unassigned) = Jordi Mallach (jordi)
** Changed in: xqf
Importance: Undecided = High
** Changed in: xqf
Status
The problem seems to be fixed in 2.6.31-generic #48-Ubuntu.
--
ASUSTeK Computer INC. 1005HA karmic hungs on shutdown
https://bugs.launchpad.net/bugs/449055
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: openerp-server
After creating an openerp database with minimal profile and without
sample data I install the account package.
Just after this installation I make a backup and restore the database
apparently without problems... but I can't not enter on
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/33750360/Dependencies.txt
--
ir_act_window contains null value on field name after installing module account
https://bugs.launchpad.net/bugs/452439
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
Karmic hangs during shutdown, after printing deactivating swap at the
console. Reboot works fine. The last message in /var/log/messages
(before the next boot) is kernel: Kernel logging (proc) stopped., so
I'm afraid whatever happens is not logged anywhere.
ProblemType: Bug
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/33463119/AlsaDevices.txt
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/33463120/BootDmesg.txt
** Attachment added: Card0.Amixer.values.txt
Similar thing here, but with a difference: my network IS IPv6-Enabled.
When I plug an ethernet cable, it DOES get its IPv4 configuration using
DHCP and its IPv6 configuration via rtadvd:
Oct 7 20:52:44 eeepc2jordi NetworkManager: info DHCP: device eth1 state
changed (null) - preinit
Oct 7
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/33249559/Dependencies.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs,
Architecture: i386
CRDA: Error: [Errno 2] No such file or directory
DistroRelease: Ubuntu 9.10
IfupdownConfig:
auto lo
iface lo inet loopback
IpRoute:
192.168.0.0/24 dev eth1 proto kernel scope link src 192.168.0.132 metric 1
172.16.159.0/24 dev vmnet1 proto kernel scope link src
** Attachment added: IwConfig.txt
http://launchpadlibrarian.net/33249567/IwConfig.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: NetDevice.vmnet1.txt
http://launchpadlibrarian.net/33249579/NetDevice.vmnet1.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
** Attachment added: NetDevice.eth1.txt
http://launchpadlibrarian.net/33249569/NetDevice.eth1.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: IpAddr.txt
http://launchpadlibrarian.net/33249566/IpAddr.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: NetDevice.wlan1.txt
http://launchpadlibrarian.net/33249584/NetDevice.wlan1.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
** Attachment added: NetDevice.vmnet8.txt
http://launchpadlibrarian.net/33249583/NetDevice.vmnet8.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
** Attachment added: NetDevice.wmaster0.txt
http://launchpadlibrarian.net/33249586/NetDevice.wmaster0.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of
** Attachment added: NetDevice.lo.txt
http://launchpadlibrarian.net/33249571/NetDevice.lo.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: Gconf.txt
http://launchpadlibrarian.net/33249564/Gconf.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: NetDevice.vboxnet0.txt
http://launchpadlibrarian.net/33249574/NetDevice.vboxnet0.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of
** Attachment added: RfKill.txt
http://launchpadlibrarian.net/33249594/RfKill.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: XsessionErrors.txt
http://launchpadlibrarian.net/33249802/XsessionErrors.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs,
** Attachment added: nm-system-settings.conf.txt
http://launchpadlibrarian.net/33249805/nm-system-settings.conf.txt
** Tags added: apport-collected
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug
** Attachment added: WifiSyslog.gz
http://launchpadlibrarian.net/33249745/WifiSyslog.gz
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: PciNetwork.txt
http://launchpadlibrarian.net/33249589/PciNetwork.txt
--
IP6 automatic on non-IP6 network prevents wired interface IP4 configuration
https://bugs.launchpad.net/bugs/430899
You received this bug notification because you are a member of Ubuntu
Bugs, which is
El dc 07 de 10 de 2009 a les 20:35 +, en/na Alexander Sack va
escriure:
apport-collect 430899
Done and sent. The wifi interface was flagged as available to all
users, but I deleted the connection and recreated it several times
until I made the connection to the IPv6 stuff. Right now I'm
The computer now runs Hardy and I am doing all tests related to this bug from a
Jaunty live CD, so I don't know how to proceed.
Is it possible to do what you suggest from a Jaunty live CD ?
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You
the router.
Now I'm about 10m from the router and the speed is reduced until 36Mb/s.
It's possible to increase the connection speed?
jo...@jordi-ubuntu:~$ ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
64 bytes from 192.168.2.1: icmp_seq=1 ttl=64 time=7.91 ms
64 bytes from
Tried it and didn't work. I get the Ubuntu is running in low graphics
mode message. I attach the xorg log file.
** Attachment added: Xorg.1.log
http://launchpadlibrarian.net/32518716/Xorg.1.log
--
[i945G] Samsung TV not detected on VGA output (no screens)
b or cable, works fine and Vista wifi “n”
connection works fine too.
The lspci command return:
jo...@jordi-laptop:~$ lspci -nn | grep Network
14:00.0 Network controller [0280]: Intel Corporation Wireless WiFi Link 5100
[8086:4232]
jo...@jordi-ubuntu:~$ uname -r
2.6.28-15-generic
jo...@jordi
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/32542873/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/32542874/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/32542875/ProcStatus.txt
--
Problems
In my case it crashed when changing the wired connectin to use OpenDNS.
After clicking Apply and entering the admin password.
--
nm-connection-editor crashed with SIGSEGV in gtk_button_set_label()
https://bugs.launchpad.net/bugs/436109
You received this bug notification because you are a member
, but, what is the next step?
This is console result:
jo...@jordi-ubuntu:~$ uname -r
2.6.28-15-generic
jo...@jordi-ubuntu:~$ dmesg | grep iwl
[ 11.269247] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
1.3.27ks
[ 11.269250] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 11.269335
So far I found a way to install firebird: just manually create
/var/run/firebird/2.1, give appropiate permissions (777) and run dpkg-
reconfigure again.
--
package firebird2.1-super 2.1.1.17910-release.ds1-1ubuntu1 failed to
install/upgrade: subprocess post-installation script returned error
No news on this bug??
I am having exactly the same problem on Xubuntu 9.04, although recently
I set up Firebird on another machine with Ubuntu 9.04 and everything
worked.
Jordi.
--
package firebird2.1-super 2.1.1.17910-release.ds1-1ubuntu1 failed to
install/upgrade: subprocess post
After another update (this time only tzdata package) now the error
message has changed (attached a copy of the message window). Now it says
that there is an error on the bonobo-activation-server which prevents
nautilus from working correctly.
Jordi
** Attachment added: Captura-nautilus.png
These issues seem to be fixed in SVN.
--
A missing directory and wrong init-scripts in torque-2.3.6 in Jaunty
https://bugs.launchpad.net/bugs/360827
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
Sorry for the delay, I was away on holidays for almost two weeks. The
problem reported with Nautilus happens with all users. I didn't specify
a package because it seems that whatever happened also affected the
normal powering off of the computer and the sound in non-privileged
users.
Jordi
Here is the Xorg.0.log with the package installed.
Jordi.
** Attachment added: Xorg.0.log
http://launchpadlibrarian.net/31755904/Xorg.0.log
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You received this bug notification because you
~jaunty2_i386.deb
on this server.
Jordi.
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs
** Attachment added: Captura-nautilus.png
http://launchpadlibrarian.net/31242768/Captura-nautilus.png
--
[Hardy] After updating desktop fails to initialize: Cannot show
x-nautilus-desktop:///.
https://bugs.launchpad.net/bugs/423214
You received this bug notification because you are a
the update is
+ only of mono libraries and libc6 I suspect that this last might be the
+ cause, but I'd better check here before... No more updates have been
+ performed on the computer.
Thanks,
Jordi.
--
[Hardy] After updating desktop fails to initialize: Cannot show
x-nautilus-desktop
be the
cause, but I'd better check here before... No more updates have been
performed on the computer.
Thanks,
Jordi.
** Affects: ubuntu
Importance: Undecided
Status: New
--
[Hardy] After updating desktop fails to initialize: Cannot show
x-nautilus-desktop:///.
https
just departing on holidays now ... for 10 days. When I come back I wll
test the new package.
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
There is also another problem since the update with the volume control and the
sound.
This is a living room-PC that we mainly use to watch movies. Before the update
it worked correctly but now with the normal user that we use to watch movies
(unprivileged and with auto-login) it doesn't work:
Now I realise that apm must also be failing, since it is the third time
since the update and the problems that I have to switch off the computer
manually. After a normal ubuntu shutdown it stays on blank screen.
--
[Hardy] After updating desktop fails to initialize: Cannot show
Debian's #533557 was fixed in the latest 0.7.2-1 upload.
** Changed in: openttd (Debian)
Importance: Undecided = Unknown
** Changed in: openttd (Debian)
Status: New = Unknown
** Changed in: openttd (Debian)
Remote watch: None = Debian Bug tracker #533557
--
OpenTTD dies silently
Dave, can you take a screenshot, or take a photograph of your monitor when this
Warning screen is displayed?
That might help us understand why this is happening.
Thanks.
--
when i boot in to win me It thinks I have a virus in mbr
https://bugs.launchpad.net/bugs/410548
You received this bug
with the patch and it works. I attach the
xorg.1.log file (it is 1 because somehow session number 0 got stuck and
the new driver opened the session in number 1). And as I said, the patch
works: It detects the screen correctly and gets the right resolution.
Jordi.
** Attachment added: Xorg.1.log
On 22nd of August of 2009 this still happens.
The problem seems that gstreamer0.10-ffmpeg does not detected the
libavcodec-unstripped52 previously installed and installs the stripper
version.
As you point out, all the plugins provided by the unstripped version are
not available.
Jordi
Hi, I have compiled my own kernel, based on the LPIA sources
(2.6.24-24.59) of Ubuntu 8.04 LTS available at: http://ports.ubuntu.com/
I also get the following WARNING:
[ 34.008772] sysfs: duplicate filename 'acpi' can not be created
[ 34.008778] WARNING: at
conf. to submit the files?
Thanks,
Jordi.
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs
FWIW, this has been done in nano 2.1.10-1 in Debian.
--
syntax highlighting in nano should be enabled by default
https://bugs.launchpad.net/bugs/310056
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
No, as far as I am concerned. Thank you very much.
Best,
Jordi
On Thu, Aug 13, 2009 at 2:17 PM, Pedro Villavicencio
pe...@ubuntu.comwrote:
Thanks for the report Jordi, is this still an issue with notify-osd
0.9.16 ?
** Changed in: notify-osd (Ubuntu)
Status: New = Incomplete
Last weekend I tried to set up a boot USB stick but was not successfull.
Have to check the creating procedure (used my laptop's Jaunty app. to
create it) and/or maybe update the BIOS of the computer. Haven't had
time during the week.
--
[i945G] Samsung TV not detected on VGA output (no screens)
it would have to be on a live CD.
Jordi.
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs
Public bug reported:
jo...@invisigoth:~$ gnome-do
Unhandled Exception: System.TypeInitializationException: An exception was
thrown by the type initializer for Mono.Unix.Native.Stdlib ---
System.DllNotFoundException: libMonoPosixHelper.so
at (wrapper managed-to-native)
Public bug reported:
On Karmic Koala Alpha 2, the Screensaver doesn't stop with the mouse
movement. When I touch the keyboard, it stoped.
(sorry for my english)
** Affects: ubuntu
Importance: Undecided
Status: New
--
Screensaver doesn't stop with a Logitech Wirless RX650 mouse
Public bug reported:
Karmic Koala
When I try to open the CD device (an original CD) in Nautilus, it
crashed. No error in terminal.
The original music CD-ROM is mixed: One part for audio, another for a
video
** Affects: ubuntu
Importance: Undecided
Status: New
--
Nautilus
** Description changed:
Karmic Koala
When I try to open the CD device (an original CD) in Nautilus, it
crashed. No error in terminal.
+
+ The original music CD-ROM is mixed: One part for audio, another for a
+ video
--
Nautilus crashes when i try to open a Original CD with a new tab
Same thing here. 14-generic fixed the problem on an eeePC 900. Good job!
--
Slow performance and tiling issues on i915
https://bugs.launchpad.net/bugs/349314
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
2009/7/8 Martin Pitt martin.p...@ubuntu.com:
Accepted linux into jaunty-proposed, the package will build now and be
available in a few hours. Please test and give feedback here. See
Hi there. Forgive me if I am asking an obvious question. Could you
tell me which is the name of the package which
Hi there. _0.4.6 seems to work for me (eeePC 900, using 9.04), but I
had to switch back and forth once betweent the two modes to get it
right.
--
Switch Desktop Mode corrupted settings
https://bugs.launchpad.net/bugs/349519
You received this bug notification because you are a member of Ubuntu
Although you don't write it explicitly, I assume that after the reboot,
the ubuntu2gomyhr version performed just the same as the
ubuntu0sarvatt version.
Yes it did.
From your explanation I understand that I wait to test karmik until we
get news from upstream.
--
[i945G] Samsung TV not
Hi Geir,
I am using the packages you placed on http://www.kvante.info/LP379157/.
I downloaded them and install them using dpkg.
I did as you asked me: Installed 0ubuntu0sarvatt, rebooted (X don't
work), installed 0ubuntu2gomyhr and then I tried to restart gdm and the
result is (copied from
And here the second one.
Now I've been asked by Bryce Harrington to try a new release of ubuntu:
A new major version of the -intel driver is now available in Karmic.
This version includes a major reworking of the acceleration
architecture, which resolves a huge number of issues. We do not
Here is the first attachement
** Attachment added: Xorg.0.log.ubuntu0sarvatt
http://launchpadlibrarian.net/28523825/Xorg.0.log.ubuntu0sarvatt
--
[i945G] Samsung TV not detected on VGA output (no screens)
https://bugs.launchpad.net/bugs/379157
You received this bug notification because you
401 - 500 of 712 matches
Mail list logo