[Expired for sane-backends (Ubuntu) because there has been no activity
for 60 days.]
** Changed in: sane-backends (Ubuntu)
Status: Incomplete = Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I'm sorry that nobody cared about your bugs for such a long time. Are
you still having problems. Thank for telling us!
** Changed in: sane-backends (Ubuntu)
Status: New = Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Thanks for this thread, Peter B.
I had precisely the same issue with my Epson Perfection 3490 -- but with
a Twist. I recently had a short power outage (actually just a blown
circuit breaker). Because the computer did not power down properly, the
scanner was not sent a power-down signal, and I
Is your scanner working in Linux now? I recently had a similar problem
with a SnapScan 1212U in Hardy:
sane-find-scanner
...
found USB scanner (vendor=0x06bd [AGFA ], product=0x2061 [SNAPSCAN]) at
libusb:003:006
scanimage -L
device `snapscan:libusb:003:006' is a AGFA SNAPSCAN flatbed scanner
yes, it does with no problems since it is connected straight into a usb
port of the pc NOT into a usb powered hub.
I did not do any win driver extraction - as a matter of fact I do not (I
mean the system) even have /etc/share/sane/snapscan file. the hardy file
system is exactly as provided by
since last post
- this scanner was connected to a PC USB port NOT to a powered usb hub
from a pc port and it works without a problem.
the only thing I can think of is that the usb hub reseting after
removing online a usb device is not consistent or the same as removing a
usb device from a PC
hello again,
this morning I just turned on the pc and got this output to
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your
done as said in the last post; results below
error failed to open device 'snapscan:libusb:002:008':invalid argument
lsusb
Bus 002 Device 008: ID 06bd:208f AGFA-Gevaert NV SnapScan e50
Bus 002 Device 007: ID 0d8d:0105 Promotion Display Technology, Ltd
Bus 002 Device 004: ID 0ace:1215 ZyDAS
hello,
no, xsane refuses to open -- same error message
error failed to open device 'snapscan:libusb:002:008':invalid argument
going further, in /etc/sane.d/snapscan.conf there is
# Agfa Snapscan e50
usb 0x06bd 0x208f
should there be in /dev/usb some file/reference to usb scanners?
(mentioned
I just installed xp and see if agfa snapscan e50 works or is defective;
yes it does work with no problems.
- I noticed that after shutting down the pc after the xp run the
scanner front panel light went off contrary to hardy shutdown - the
light was always on on scanner panel (as it does on the
10 matches
Mail list logo
