btw, is https://bugs.launchpad.net/ubuntu/+source/linux-
source-2.6.20/+bug/91279 a duplicate of this?
--
freeze at startup
https://bugs.launchpad.net/bugs/38263
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
I get the message but it doesn't freeze anything. Hardy &
2.6.24-17-generic & Fujitsu Siemens L1310G laptop (see
https://wiki.ubuntu.com/LaptopTestingTeam/FujitsuAmiloL1310G)
[4294671.433000]..MP-BIOS bug: 8254 timer not connected to IO-APIC
Adding 'noapic' in the GRUB startup line removes the er
I had the exact same problem and i managed to fix it by randomly changing my
PCI-Express BIOS settings
I spent weeks trying to figure out why it was freezing loading ubuntu, even
from the livecd, then i tried unpluging my pci-express card and pluging in the
integrated graphics and it worked! so
Motherboard:
CPU Type Intel Pentium 4 630, 3600 MHz (15 x 240)
Motherboard Name DFI LANParty 925X-T2 (3 PCI, 2 PCI-E x1, 1 PCI-E x16, 4
DDR2 DIMM, Audio, Dual Gigabit LAN, IEEE-1394)
Motherboard Chipset Intel Alderwood i925X
System Memory 1024 MB (DDR2-533 DDR2 SDRA
here is the lspci -vvn
These files are from my Acer Ferrari. All Edgy updates current as of this
moment.
No other problems except that the kernel doesn't load the bcmw to run the
wireless. But I'll report that elsewhere.
** Attachment added: "lspci -vvn"
http://librarian.launchpad.net/4
Here is the lspci -vv
** Attachment added: "lspci -vv"
http://librarian.launchpad.net/4441614/lspci%20-vv
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Ubuntu edgy knot 3 - daily build (september 26th, 2006)
FIXED !!!
...but still have the graphic problem (black screen event hough i have
selected xforcevesa ...
You can find in attachment a lspci-vv.txt file for my Acer Aspire
5024WLMI
** Attachment added: "lspci -vv"
http://librarian.launch
Also output from "lspci -vv" and "lspci -vvn" (attached, not pasted in
comments) would be helpful to see what devices are on that IRQ (besides
the firewire controller).
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.u
That message on its own isn't necessarily a problem. Can you boot in
rescue mode and see if there's any other relevant looking output?
--
Matthew Garrett | [EMAIL PROTECTED]
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
As of Edgy kernel 2.6.17.9.23 on AMD64, the bootup error message flashes
the following message:
8254 timer not connected
and then goes very slowly and grinds to a halt with the following message:
[22.xx] irq 233: nobody cared (try booting with the "irqpoll" option
[22.xx] handlers:
[22.
Guessed wrong. I have the latest edgy, and it was NOT fixed
until yesterday. Now it is patch-fixed somehow, but Edgy
gets stuck and loads VERY VERY slowly. I am in a library
computer far from home as I read this, but will send bug
reports this evening.
Susan Cragin
--
freeze at startup
https:
Guessing this is the same as the MP-BIOS bug, in which case it should be
fixed in edgy, and in dapper-proposed.
** Changed in: linux-source-2.6.17 (Ubuntu)
Assignee: (unassigned) => Ben Collins
Status: Unconfirmed => Fix Released
** Changed in: linux-source-2.6.15 (Ubuntu)
Stat
Acer Ferrari 4005 AMD Turion 64 with ATI mobility radeon X700
Knot 3 & all updates.
Last tried 7:30 p.m. EST.
Error message
12.105122
MP-BIOS bug: 8254 timer not connected to IO-APIC
kernel direct mapping
tables up to fee 01000 @ 8000-8000
Now, having said that, I did modify the /etc/X11/xorg
Edgy Knot3 : same probleme
... and the computer boots with these options :
acpi=off
irqpoll
xforcevesa
... but it seems xforcevesa does not "work" ...
with a dpkg-reconfigure xserver-xorg, choosing vesa graphic driver, it works...
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu
@Matthew Garrett
Nothing changed if i try the both bootoptions.
btw: If i try to install Ubuntu 5.10 it skip the error... and everything
is well. But i would like to install dapper drake...
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubu
I had the same probleme !
Computer : Acer Aspire 5024 WLMI (turion)
ubuntu version : Edgy Eft knot 2
Can't boot with traditionnal options ...
But the computer boots with these options :
acpi=off
irqpoll
xforcevesa
But : i've got a black screen. Gnome seems to open because i can hear
the music ..
After booting with "acpi_skip_timer_override" there appears
to be a problem with the CDROM driver at the second stage
(probably caused by some IRQ problems - I also tried booting
with "nodma", but that went even worse).
The CDROM drive makes a sounds like the CDROM media
might be damaged and the
Ok. Can you boot with the acpi_skip_timer_override argument and without
the splash argument, then see what happens?
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Both boot-options removes the freeze at first, and I get to the
next installation stage with the graphical splash, where the
installation hangs at "mounting live-user" or similar.
The first boot-option produces the output at tty0:
cannot allocate region 3 of device :00:00.0
and the second bo
Could people who are hitting this on edgy please try the following two
kernel parameters (one at a time and both together)
acpi_skip_timer_override
enable_8254_timer
and let me know if they change anything? It would be especially helpful
to know if enable_8254_timer makes your clock run twice as
** Changed in: linux-source-2.6.17 (Ubuntu)
Assignee: (unassigned) => Ramosis
** Changed in: linux-source-2.6.17 (Ubuntu)
Assignee: Ramosis => (unassigned)
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubu
I have the same problem as some other peopel in this thread. If i am try
to install dapper i get this message:
Uncompressing Linux... Ok, bootin the Kernel.
[17179571.48].. MP-BIOS bug: 8254 timer not connected to IO-APIC
[17179571.86] PCI: Cannot allocate resource region 3 of device
I have the exact same problem with lockups during installation of Edgy
i386 on a HP Pavilion AMD64 PC.
The computer has an Amethyst motherboard and Phoenix
BIOS, so the problem is not restricted to ASUS motherboards.
I previously had to install dapper with -nodma, to avoid
lockups when mounting
The Ubuntu 6.06 install CD does the 8254 timer error for me as well. I'm
running on an Abit AT8 series motherboard with an AMD64 Athlon.
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubunt
I am also running an Shuttle ST20G5. After adding clock=pit to the boot
parameters, the BIOS bug message is shown, but the boot process
continues.
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/list
I've added egdy kernel to the list. However, I am not absolutely sure
that this isn't a BIOS bug, since it seems to affect mainly ASUS mother
boards.
** Also affects: linux-source-2.6.17 (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
freeze at startup
https://launchpad.net/bugs/
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
De mail is toegekomen op de server
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Bug 41095 has been marked a duplicate of this bug
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I too have a motherboard with the ATI xpress 200 chipset. I attempted
lasercat's settings and tried "acpi=off irqpoll" with no success on Edgy
Eft which uses the 2.6.17 kernel. As of 2.6.16, there are some fixes
with IRQ issues being resolved but the problem as a whole still exists
with ACPI.
Ub
With the Shuttle XPC ST20G5 the kernel peramiters I had to pass to
install were:
acpi=off
and
irqpoll (fixed the mounting root file system freeze)
Hope this helps
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ub
Dapper will not be updated to a new kernel release. However, if you can
pinpoint the changeset that fixes this problem it can possible be
backported into dapper.
Edgy has 2.6.17, so assuming fixed there.
** Changed in: linux-source-2.6.15 (Ubuntu)
Assignee: ChuckShort => (unassigned)
OK I installed the latest stable kernel from kernels.org ( 2.6.17.7),
installed the latest fglrx driver from ATI and all now works on the
Radeon Express 200.
Looking through the kernel changelogs I think this issue was fixed in
2.6.16. Anyway, this problem should be resolved if/when Dapper moves
** Tags added: amd64 boot dapper
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I just installed that kernel too and withouth acpi=off I can't boot
either. (noapic and nolapic is given to).
output of dmidecode
# dmidecode 2.7
SMBIOS 2.4 present.
63 structures occupying 2846 bytes.
Table at 0x000F7170.
Handle 0xDA00, DMI type 218, 251 bytes.
OEM-specific Type
Header
** Attachment added: "Re: freeze at startup (black screen fixed)"
http://librarian.launchpad.net/3057908/xorg.conf
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Here you go
# dmidecode 2.7
SMBIOS 2.3 present.
47 structures occupying 1376 bytes.
Table at 0x000F.
Handle 0x, DMI type 0, 20 bytes.
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: 6.00 PG
Release Date: 02/14/2006
Address: 0xE
R
Please attach the output of sudo dmidecode to this bug.
Thanks
** Changed in: linux-source-2.6.15 (Ubuntu)
Assignee: (unassigned) => ChuckShort
--
freeze at startup
https://launchpad.net/bugs/38263
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/l
Additional info:
'acpi=off' - does work as I AM ABLE to Telnet into the box, but there is
absolutely NO GUI. Unfortunate since I am running the Desktop and not
the Server version.
The video subsystem on the Shuttle ST20G5 is on board and is the "ATi
RADEON XPRESS 200" which I know caused issue w
I'm having this same problem "MP-BIOS bug: 8254 timer..." hang after upgrading
from Breezy to Dapper.
My system is a ST20G5.
acpi=off: bypasses the above error, but then it appears to hang while loading
X-windows.,
pci=noacpi: bypasses the above error, but then it appears to hang while loading
46 matches
Mail list logo
