[Expired for cups (Ubuntu) because there has been no activity for 60
days.]
** Changed in: cups (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/441897
Titl
Try installing the packages:
brother-cups-wrapper-extra
brother-lpr-drivers-extra
and then select the model in the list when adding the printer. They
provide the driver so no other driver installation should be needed.
Also try upgrading to Natty.
This should have happened automatically. See bug
Troy James Sobotka, you problem is not the one described here. Please
post a new bug, and tell which driver you are exactly using and where
you downloaded it. So I can see whether it is really without binary
blobs.
--
You received this bug notification because you are a member of Ubuntu
Bugs, whi
An associate just attempted to plug in and install a MFC-295CN Brother
printer.
He plugged in the USB cable and nothing happened.
The drivers are available and I stepped him through installing them.
>From what I could see however, all of the code is GPL'd and there are no
binary blobs, so I am w
FriedChicken, your problem is that your printer was auto-configured
under Jaunty and there HAL was still used for printing. In Karmic it is
not used any more and therefore the hal:///... URIs are invalid.
Printers auto-configured under Karmic will work as they will directly
get the correct usb://..
I guess this has to do something with HAL (is it completely replaced in
karmic already?). After adding the printer manually again it works. So
the driver itself has no problem but the auto-configuration.
/etc/cups/printers.conf:
[NEW configuration:]
[...]
DeviceURI usb://Brother/DCP-120C
Confirmed - Brother DCP-120C (uses MFC-210C- or DCP-110C-driver)
cupsd.conf is not empty and the webinterface shows that the Jaunty
config still exists but the priner is shown as disconnected.
$ dmesg
[...]
[ 3451.080032] usb 5-1: new full speed USB device using uhci_hcd and address 4
** Changed in: cups (Ubuntu)
Status: Incomplete => Confirmed
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/bugs/441897
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
After new updates, printer stopped working again.
** Changed in: cups (Ubuntu)
Status: Fix Released => Incomplete
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/bugs/441897
You received this bug notification because
** Changed in: cups (Ubuntu)
Status: Incomplete => Fix Released
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/bugs/441897
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
After todays updates, printer is detected! Thanks!
On Fri, Oct 9, 2009 at 8:10 AM, Jose Fernandez
wrote:
> Could it be a policy kit issue? Although I dont see any options for
> printers in policy kit (actually I get very few options now).
>
>
> On Wed, Oct 7, 2009 at 9:04 AM, Jose Fernandez wrote
Could it be a policy kit issue? Although I dont see any options for printers
in policy kit (actually I get very few options now).
On Wed, Oct 7, 2009 at 9:04 AM, Jose Fernandez
wrote:
> Cups initializes now, but still no printer anywhere.
>
>
> On Wed, Oct 7, 2009 at 8:32 AM, Till Kamppeter
> wr
Cups initializes now, but still no printer anywhere.
On Wed, Oct 7, 2009 at 8:32 AM, Till Kamppeter
wrote:
> I think so, cupsd.conf should never be empty. Do a
>
> sudo cp /etc/cups/cupsd.conf.default /etc/cups/cupsd.conf
>
> and then
>
> sudo /etc/init.d/cups start
>
> Does everything work now?
I think so, cupsd.conf should never be empty. Do a
sudo cp /etc/cups/cupsd.conf.default /etc/cups/cupsd.conf
and then
sudo /etc/init.d/cups start
Does everything work now?
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/
I have an empty cupsd.conf file, is it related?
On Wed, Oct 7, 2009 at 7:55 AM, Jose Fernandez
wrote:
> This is what I get, it seems to be crashing.
>
> * Starting Common Unix Printing System: cupsd
> cupsd: Child exited on signal 15!
>
>
> On Wed, Oct 7, 2009 at 6:37 AM, Til
This is what I get, it seems to be crashing.
* Starting Common Unix Printing System: cupsd
cupsd: Child exited on signal 15!
On Wed, Oct 7, 2009 at 6:37 AM, Till Kamppeter wrote:
> You get
>
> lpinfo -v
>
> lpinfo: Connection refused
>
> These means that your CUPS daemon is
You get
lpinfo -v
lpinfo: Connection refused
These means that your CUPS daemon is not running. Please start CUPS with
sudo /etc/init.d/cups start
If CUPS does not start, please try restarting CUPS again with
sudo /etc/init.d/cups start
but capturing an error_log as described in the "CUPS err
Here are the outputs. Thanks.
dpkg -l cups | cat
Desired=Unknown/Install/Remove/Purge/Hold
|
Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version
Description
+
flowerdealer, can you run the commands (Note that some commands you have
executed earlier already, please run them again):
dpkg -l cups | cat
ls -l /usr/lib/cups/backend/usb
chmod 700 /usr/lib/cups/backend/usb
sudo /usr/lib/cups/backend/usb
lpinfo -v
lsusb
sudo lsusb
ls -l /dev/bus/usb/*/*
ls -l /
The printer does not appear anywhere in kde, and is not listed when adding
new printers.
On Tue, Oct 6, 2009 at 8:16 AM, Till Kamppeter
wrote:
> So does the printer not get listed in the application's print dialogs
> any more? Is the main window of system-config-printer completely empty
> (no pri
So does the printer not get listed in the application's print dialogs
any more? Is the main window of system-config-printer completely empty
(no printer icons)?
What happens if you click the "New" button in system-config-printer?
Does your printer get listed as one of the discovered devices?
--
Well, before it immediately appeared in the printer system configuration.
And then I was able to print. Now it isnt accesible in any print dialog.
On Mon, Oct 5, 2009 at 5:25 AM, Till Kamppeter
wrote:
> What exactly happens? Is your printer not detected at all by CUPS or by
> system-config-printe
What exactly happens? Is your printer not detected at all by CUPS or by
system-config-printer? Or are you able to set it up but it does not
print?
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/bugs/441897
You received this
sudo lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 04eb:e033 Northstar Systems, Inc.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Fo
Can you please run the following commands:
sudo lsusb
ls -l /dev/bus/usb/*/*
ls -l /dev/usb/lp*
lsmod | grep usblp
dpkg -l cups | cat
/usr/lib/cups/backend/usb
sudo su lp -c /usr/lib/cups/backend/usb
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
ht
I have all the latest updates, and it still isnt working.
On Sun, Oct 4, 2009 at 7:11 AM, Till Kamppeter wrote:
> Please do a full system update abd then check again. See bug 420015.
>
> ** Changed in: cups (Ubuntu)
> Status: New => Incomplete
>
> --
> Brother printer MFC-230 C not detecte
Please do a full system update abd then check again. See bug 420015.
** Changed in: cups (Ubuntu)
Status: New => Incomplete
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/bugs/441897
You received this bug notificati
system-config-printer-kde uses cups for detection.
** Package changed: kdeadmin (Ubuntu) => cups (Ubuntu)
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/bugs/441897
You received this bug notification because you are a memb
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/32961109/Dependencies.txt
--
Brother printer MFC-230 C not detected with drivers installed in Karmic, worked
in Jaunty
https://bugs.launchpad.net/bugs/441897
You received this bug notification because you are a member of U
29 matches
Mail list logo
