I also tried the x11perf command, but didn't get any crash. Also, this
time I didn't get logged out.
I'm realizing that I may not run compiz but metacity, not sure, I had
fiddled with that much earlier when I tried to prevent the freezes. Does
that make any difference?
--
[i845G] Karmic stops
OK. Did it. Output is completely distorted. Screen updates are not done
while scrolling. Typing this blindly most of the time, because
characters are not drawn --- only the cursor is moving. i have to
minimize the windows, then restore it again to have a look at what I
where typing...
** Attachment added: Screenshot.png
http://launchpadlibrarian.net/38742169/Screenshot.png
--
[K8M800] Xorg freeze / Kernel 2.6.32-10-generic freeze
https://bugs.launchpad.net/bugs/508699
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to
** Attachment added: Screenshot-1.png
http://launchpadlibrarian.net/38742292/Screenshot-1.png
--
[K8M800] Xorg freeze / Kernel 2.6.32-10-generic freeze
https://bugs.launchpad.net/bugs/508699
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to
After a few minutes the screen froze. I rebooted, but no way: the system
freezes while gdm starts. With every boot the time I had until it froze
was cut down a bit.
** Attachment added: Xorg.0.log.old
http://launchpadlibrarian.net/38742362/Xorg.0.log.old
--
[K8M800] Xorg freeze / Kernel
worked for me too, thanks
--
Corrupt video leaving graphics mode
https://bugs.launchpad.net/bugs/482456
You received this bug notification because you are a member of Ubuntu-X,
which is a direct subscriber.
___
Mailing list:
I've tried all the latest mainline kernels up to and including 2.6.33rc6
and all have the same issue. I'm a bit stuck now and would be grateful
if anyone could point me at what to try next.
--
[i845] karmic fails to initialise display on boot. 2.6.31-3 + drm + Intel 845G
This has nothing to do with closed source drivers. This bug only occurs
with Compiz enables, which the Nouveau drivers do not support, so they
are an invalid test case.
As stated before in this bug numerous times, this worked fine in 8.10
with all closed source drivers that supported Compiz.
** Package changed: xorg (Ubuntu) = xserver-xorg-video-intel (Ubuntu)
--
entire desktop environment locks up in 9.10, i3-530 proc, built-in graphics
https://bugs.launchpad.net/bugs/516909
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to
** Package changed: xorg (Ubuntu) = nvidia-graphics-drivers-180
(Ubuntu)
--
[Karmic][nvidia] VT switch cause segfault error 4 in nvidia_drv.so. Related to
pulseaudio?
https://bugs.launchpad.net/bugs/516861
You received this bug notification because you are a member of Ubuntu-X,
which is
** Package changed: xorg (Ubuntu) = xserver-xorg-video-intel (Ubuntu)
--
Xorg freeze, screen flickering
https://bugs.launchpad.net/bugs/516548
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in ubuntu.
** Package changed: xorg (Ubuntu) = xserver-xorg-video-ati (Ubuntu)
--
two blinking lines appear on my screen continuously
https://bugs.launchpad.net/bugs/516837
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-ati in ubuntu.
You have been subscribed to a public bug:
Binary package hint: update-manager
sudo update-manager
ERROR:root:html widget
Traceback (most recent call last):
File /usr/lib/python2.6/dist-packages/DistUpgrade/DistUpgradeViewGtk.py,
line 404, in __init__
import webkit
ImportError: No module
You have been subscribed to a public bug:
Binary package hint: update-manager
It just crashed while it was doing a partial upgrade. Ubuntu 10.04
alpha2.
ProblemType: Crash
Architecture: amd64
AssertionMessage: python2.6: ../../src/xcb_io.c:249: process_responses:
Assertion `(((long)
This is rather an xcb issue.
Could you please tell if it's reproducible and the steps to reproduce it ?
Thanks.
** Package changed: update-manager (Ubuntu) = libxcb (Ubuntu)
** Changed in: libxcb (Ubuntu)
Status: New = Incomplete
--
update-manager assert failure: python2.6:
Thanks for your report.
This is hardly an update-manager issue. Affecting to libxcb.
Are you able to reproduce it ? If so, could you please describe the steps to do
so. Thanks.
** Package changed: update-manager (Ubuntu) = libxcb (Ubuntu)
** Changed in: libxcb (Ubuntu)
Status: New =
Don't now what has happend.
can't help you.
Maybe an partial update?
Greetings Ben
© BenHyper
2010/2/4 Jean-Baptiste Lallement jeanbaptiste.lallem...@gmail.com
This is rather an xcb issue.
Could you please tell if it's reproducible and the steps to reproduce it ?
Thanks.
** Package
** Changed in: x11-utils (Debian)
Status: New = Confirmed
--
Luit hangs on process exit
https://bugs.launchpad.net/bugs/515679
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to x11-utils in ubuntu.
Not completely sure I have the same problem, but I had issues with a Dell
Dimension 2400 that would consistently lock up on boot. Everything worked
fine in Jaunty. I even reloaded Karmic from scratch and still have
problems. I tried a lot of troubleshooting and the only thing that seems to
help
I have a similar problem since upgrading Lucid Alpha 2 to 2.6.32-12.
My system boots to a different virtual terminal which does display the
cursor, I then use CTRL+ALT+F7 to show the login screen. But then my
system just freezes.
My system has also worked fine on all prior Ubuntu versions, and
so is 2.8.0-8-g12c5aec a regression from 2.8.1-1 which I've been VERY
happily running freeze-free since you put it up?
--
[i845G] Karmic stops responding a few minutes after log in
https://bugs.launchpad.net/bugs/456902
You received this bug notification because you are a member of Ubuntu-X,
I have same problem as koan. I am using ubuntu 9.10 64-bit.
SiS driver doesn't detect SIS672 chip so I downloaded SIS671/672
Driver from http://ncc-1701a.homelinux.net/~linux-
sis/index.php?page=Downloads
I have an ASUS X5DC laptop. It appears that the reason the modes are
detected is that
Hello
Got the same problem in kernel 2.6.31-17-generic Karmic with a Dell D630 Laptop.
USing a Dual Screen setup.
My laptop was ok. 1280 X 800
But the VGA was always using 1024x768.
[2.199142] [drm] DAC-6: set mode 1024x768
Nothing to do
But, after installing 2.6.32 from
Very strange, now I have reinstalled updates from xorg-edgers again and indeed
found slight improvement of the performance! Maybe thanks to the newer version
of mesa. Synaptic says mesa is 7.8.0 now (was 1.6.0), Intel driver is 2.10.0
(was 2.9.0), xserver-xorg-core is 1.6.5 (was 1.6.4).
This one should be able to get you going:
http://ajoliveira.com/ajoliveira/uk/software/xorg.php otherwise report a
bug there. All, please also vote This bug also effects me to indicate
this package should be released in updates soon.
--
[needs-packaging] no working driver for sis 671/771 video
I'm on 2.6.32 (Linux piquet 2.6.32-020632-generic #020632 SMP Thu Dec 3
10:58:45 UTC 2009 i686 GNU/Linux) now.
Though this does not result in different behavior.
I'll attach the files mentioned above.
** Attachment added: xorg.conf
http://launchpadlibrarian.net/38755480/xorg.conf
--
** Attachment added: Xorg.0.log
http://launchpadlibrarian.net/38755506/Xorg.0.log
--
Resume broken with new ATI stack
https://bugs.launchpad.net/bugs/411294
You received this bug notification because you are a member of Ubuntu-X,
which is the registrant for xserver-xorg-driver-ati.
lspci output
** Attachment added: lspci.txt
http://launchpadlibrarian.net/38755545/lspci.txt
--
Resume broken with new ATI stack
https://bugs.launchpad.net/bugs/411294
You received this bug notification because you are a member of Ubuntu-X,
which is the registrant for
Xorg log with chrash
** Attachment added: Xorg.0.log.old
http://launchpadlibrarian.net/38755527/Xorg.0.log.old
--
Resume broken with new ATI stack
https://bugs.launchpad.net/bugs/411294
You received this bug notification because you are a member of Ubuntu-X,
which is the registrant for
Hi
My driver is a repackaging of the Winischofer driver for both Jaunty
and Karmic. It is working 100% on my laptop, either with the integrated
lcd (1280x800) or with an external monitor. But I heard that there are
cases of difficult coordination between the lcd and the external
monitor. I have
Ah, soon I will try this driver on lynx, xorg 1.7 is there and I am
curious to knw if I must keep using Jaunty or not...
--
[needs-packaging] no working driver for sis 671/771 video cards
https://bugs.launchpad.net/bugs/301958
You received this bug notification because you are a member of
I can also confirm that the newest beta driver fixes all known problems
for me.
--
Corrupt video leaving graphics mode
https://bugs.launchpad.net/bugs/482456
You received this bug notification because you are a member of Ubuntu-X,
which is a direct subscriber.
Public bug reported:
Binary package hint: xorg
Using gnome-display-properties, I configure my monitor setup to have the
laptop screen on the left and the attached external monitor on the
right.
The external monitor does not receive a signal in this configuration.
Repeated presses of Fn+F10
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/38757312/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/38757313/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/38757314/Dependencies.txt
**
Hi Antonio,
To confirmI have tried the driver on the link you provided...(in
fact that was the driver I was trying!) but thanks!
The driver detects the Video Adapter but the integrated LCD panel still
doesn't work. when I try to run X screen flashes several times and ends
up with Mode Pool
I am enclosing xorg.conf.new as created by executing 'Xorg -configure'
before starting the X server.
This shows that the openchrome driver has been selected.
** Attachment added: xorg.conf.new
http://launchpadlibrarian.net/38759809/xorg.conf.new
--
[CLE266] Console screens unusable, strange
** Tags added: patch
--
xvfb does not support randr
https://bugs.launchpad.net/bugs/516123
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-server in ubuntu.
___
Mailing list:
Thanks robert, you mentioned you had also send these patches to the
bugzilla upstream at fdo - can you indicate the bug number so we can
track it upstream (and encourage upstream to take the patches)?
--
xvfb does not support randr
https://bugs.launchpad.net/bugs/516123
You received this bug
** Tags added: patch
--
Packages using DKMS should make use of /usr/lib/dkms/common.postinst
https://bugs.launchpad.net/bugs/497149
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to fglrx-installer in ubuntu.
On Thu, 2010-02-04 at 18:58 +, Bryce Harrington wrote:
Thanks robert, you mentioned you had also send these patches to the
bugzilla upstream at fdo - can you indicate the bug number so we can
track it upstream (and encourage upstream to take the patches)?
Already done - look at the bug
** Changed in: dkms (Ubuntu)
Status: Fix Released = New
--
Packages using DKMS should make use of /usr/lib/dkms/common.postinst
https://bugs.launchpad.net/bugs/497149
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to fglrx-installer in ubuntu.
Hi!
I formerly wrote that I was affected with games under Wine... now I know that
I'm affected under native linux games too.
I encounter that error message with Sauerbrauten today.
--
radeon_dma.c:210: radeonRefillCurrentDmaRegion: Assertion `dma_bo-bo-cref ==
1' failed.
Apparently I'm blind, nevermind
--
xvfb does not support randr
https://bugs.launchpad.net/bugs/516123
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-server in ubuntu.
___
Mailing list:
Public bug reported:
Binary package hint: xserver-xorg-video-ati
I cannot reproduce it reliably, but it happen very often after some latest
updates:
1) Boot Ubuntu
2) When Gnome starts, click on user you have to login
3) Type password
Expected result:
No freeze
Actual result:
System freezes
** Attachment added: Xorg log
http://launchpadlibrarian.net/38762575/Xorg.0.log.old
--
X windows freeze on startup
https://bugs.launchpad.net/bugs/517213
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-ati in ubuntu.
Frank,
Based on your LSPCI output, I'd say that you would probably be better
served opening a new bug for your specific issue. The fix noted in the upstream
bug was for ATI Mobility X1400 and you appear to have slightly different
hardware.
Alexander,
As the original bug reporter, can
Marking fix released for Lucid based on the last 2 comments.
-JFo
** Changed in: linux (Ubuntu)
Status: Triaged = Fix Released
--
[i945G] [intel KMS regression] wrong X resolution (fuzzy aspect match)
https://bugs.launchpad.net/bugs/392544
You received this bug notification because you
This bug was fixed in the package xorg-server - 2:1.7.3.902-1ubuntu11
---
xorg-server (2:1.7.3.902-1ubuntu11) lucid; urgency=low
* Add 196_xvfb-fbscreeninit-handling.patch and 197_xvfb-randr.patch:
Adds xrandr support to xvfb. Thanks lifeless!
(LP: #516123)
-- Bryce
Adam,
You will need to open a new bug for your particular issue.
Twig,
Thank you for the update. I'll work with the Kernel team to investigate
this in Lucid.
Thanks,
-JFo
--
[i845] karmic fails to initialise display on boot. 2.6.31-3 + drm + Intel 845G
You have been subscribed to a public bug:
Binary package hint: upstart
I installed Lucid alpha-1 and have been updating frequently through
today. As of sometime yesterday (15 Jan 2010) it usually crashes during
the boot process - usually as gdm is starting, showing a rotating mouse
pointer. The
If you see mouse pointers, this is not an upstart problem but an X
server issue
** Package changed: upstart (Ubuntu) = xorg-server (Ubuntu)
--
Lucid frequently crashes while starting gdm on Averatec 3280
https://bugs.launchpad.net/bugs/508456
You received this bug notification because you are a
Apparently there's a generic X memory corruption bug triggered by the
x11perf command I gave (I can crash Xephyr with it). When X crashes out
rather than freezing, it's because of that. So it turns out this isn't a
good test of the driver.
I did witness freezing in some scenarios with this
@tpurch
Have you added the following line to xorg.conf in section device?
Option UseEdid false
Modelines should then work.
greets
Dirk
--
[needs-packaging] no working driver for sis 671/771 video cards
https://bugs.launchpad.net/bugs/301958
You received this bug notification because you are
Public bug reported:
Using Lucid amd64, after today's updates my PC crashes after 1-2 minutes of
usage.
Downgrading xserver-xorg-core and xserver-common to 2:1.7.3.902-1ubuntu9 worked
fine for me.
I also tried with the daily-live 20100203 and I got the same problem.
I tried with the nvidia, nv,
** Summary changed:
- Xorg misbehaves when user home directory is missing
+ Xorg misbehaves when user home directory is missingFya6bri
--
Xorg misbehaves when user home directory is missingFya6bri
https://bugs.launchpad.net/bugs/516929
You received this bug notification because you are a member
AFAIK, 2.6.32 fixed this issue. In any case, the current lucid lynx
suspends and resumes fine with the new ATI stack, I guess this can be
marked as fixed.
--
Resume broken with new ATI stack
https://bugs.launchpad.net/bugs/411294
You received this bug notification because you are a member of
I'm seeing 60-90% CPU utilization by netbook launcher while running Firefox.
as suggested above and here
http://www.linuxforums.org/forum/linux-desktop-x-windows/147750-netbook-launcher-using-100-cpu.html
I tried
Run dpkg-reconfigure -phigh xserver-xorg as described in the xorg.conf file's
Dirk,
Thanks but I have tried that. I have also tried other options
i.e.
UseEdidFreqs false
IgnoreEDID true
NoDDC true
none of which workI assume they are driver dependent, since they
appear to be be used differently between drivers. for example radeon
uses NoDDC nvidia uses UseEDID
I
Its a shame that the nvidia option for custom edid (Option CustomEDID
DFP-1:/etc/X11/edid.bin) isnt available for SiS67x driver because I
can extract EDID from Windows 7 Registry.
--
[needs-packaging] no working driver for sis 671/771 video cards
https://bugs.launchpad.net/bugs/301958
You
** Changed in: xorg-server (Ubuntu)
Status: New = Confirmed
--
Xorg misbehaves when user home directory is missingFya6bri
https://bugs.launchpad.net/bugs/516929
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg-server in ubuntu.
Great to know that this has been fixed for Lynx. Any hope to have the fix
backported to the Koala?
Thanks!
--
Resume broken with new ATI stack
https://bugs.launchpad.net/bugs/411294
You received this bug notification because you are a member of Ubuntu-X,
which is the registrant for
** Summary changed:
- Xorg misbehaves when user home directory is missingFya6bri
+ Xorg misbehaves when user home directory is missing
--
Xorg misbehaves when user home directory is missing
https://bugs.launchpad.net/bugs/516929
You received this bug notification because you are a member of
ASUS EEEPC T91MT
uBuntu 9.10 Karmic (desktop-i386)
** Attachment added: evtouch_hal.out
http://launchpadlibrarian.net/38770010/evtouch_hal.out
--
meta bug to collect lshal touchscreen info
https://bugs.launchpad.net/bugs/317094
You received this bug notification because you are a member of
The immediate problem (at least with regard to AisleRiot induced
crashes) has been fixed by a patch to libgtk, as referenced in bug
#450832. I can confirm that after this update the apparent growth of
memory assigned to cache in System Monitor while running AisleRiot is
gone and I infer from that
The immediate problem (at least with regard to AisleRiot induced
crashes) has been fixed by a patch to libgtk, as referenced in bug
#450832. I can confirm that after this update the apparent growth of
memory assigned to cache in System Monitor while running AisleRiot is
gone and I infer from that
Public bug reported:
Binary package hint: xorg
hello,
I run kubuntu lucid alpha2 on x86 64 and i have this error in my xorg
log:
ioctl EVIOCGNAME failed: Inappropriate ioctl for device
Linux KDELucidtest 2.6.32-12-generic #16-Ubuntu SMP Thu Jan 28 07:47:05
UTC 2010 x86_64 GNU/Linux
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/38770987/BootDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/38770991/Dependencies.txt
** Attachment added: Lspci.txt
http://launchpadlibrarian.net/38770995/Lspci.txt
** Attachment added:
Public bug reported:
Binary package hint: xorg
hello,
I run kubuntu lucid alpha2 on x86 64 and i have a error in xorg log.
PreInit returned NULL for ImExPS/2 Generic Explorer Mouse
Linux KDELucidtest 2.6.32-12-generic #16-Ubuntu SMP Thu Jan 28 07:47:05
UTC 2010 x86_64 GNU/Linux
ProblemType:
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/38771126/BootDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/38771128/Dependencies.txt
** Attachment added: Lspci.txt
http://launchpadlibrarian.net/38771135/Lspci.txt
** Attachment added:
As of Thu Feb 4 14:57:56 PST 2010, after more updates, my screen is now
positioned properly, and console TTYs work ok on this laptop.
I'm enclosing an archive of apt-show-versions output.
** Attachment added: tar archive of apt-show-versions output
BTW I am actually using the rt2500pci wi-fi device at the moment, when
getting the messages in the last comment.
--
[K8M800] Screen origin shifted to center, screen wraps, ttyN screens don't
work, on Averatec 3280 running Lucid with openchrome driver
https://bugs.launchpad.net/bugs/495553
You
But now, when I switch to a tty, I start getting kernel messages like
these from /var/log/kern.log:
Feb 4 15:09:54 eros kernel: [ 1084.808079] phy0 - rt2500pci_set_device_state:
Error - Device failed to enter state 1 (-16).
Feb 4 15:09:57 eros kernel: [ 1087.924034] phy0 -
Public bug reported:
Binary package hint: xorg
Hello,
I run kubuntu lucid alpha2 on x86 64 and i have 2 errors in my xorg log
Erreur AIGLX error: Calling driver entry point failed
Erreur AIGLX: reverting to software rendering
Linux KDELucidtest 2.6.32-12-generic #16-Ubuntu
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/38771257/BootDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/38771258/Dependencies.txt
** Attachment added: Lspci.txt
http://launchpadlibrarian.net/38771259/Lspci.txt
** Attachment added:
As of about an hour ago, the tty console screens now work. (See bug
#495553, which also seems to have been fixed)
--
[CLE266] Console screens unusable, strange background
https://bugs.launchpad.net/bugs/448911
You received this bug notification because you are a member of Ubuntu-X,
which is
I don't think those messages are a bug. :)
--
[K8M800] Screen origin shifted to center, screen wraps, ttyN screens don't
work, on Averatec 3280 running Lucid with openchrome driver
https://bugs.launchpad.net/bugs/495553
You received this bug notification because you are a member of Ubuntu-X,
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: Confirmed = Fix Released
** Changed in: xserver-xorg-video-intel (Ubuntu)
Importance: Undecided = Low
--
[i945gm] [lucid] LCD flashes and jumps horizontally quite a lot
https://bugs.launchpad.net/bugs/506444
You received this
Fix Released per comment #6. From my research, I can confirm that the
settings addressed in the patch for the bug mentioned are now set to
default behavior for i915.
-JFo
--
[i945gm] [lucid] LCD flashes and jumps horizontally quite a lot
https://bugs.launchpad.net/bugs/506444
You received this
Marked Fix Released.
Michele,
Normally we only backport security issues, so I doubt this will make it
into Karmic.
-JFo
** Changed in: linux (Ubuntu)
Status: Incomplete = Fix Released
--
Resume broken with new ATI stack
https://bugs.launchpad.net/bugs/411294
You received this bug
Per,
Would you mind running apport-collect -p linux 510004
to get us the rest of the data.
Thanks,
-JFo
** Changed in: linux (Ubuntu)
Status: New = Incomplete
** Changed in: linux (Ubuntu)
Importance: Undecided = Low
--
[lucid regression] random graphics effects after resume
** Changed in: linux (Ubuntu Lucid)
Status: New = Triaged
** Changed in: linux (Ubuntu Lucid)
Importance: Undecided = High
--
[lucid] desktop runs out of video memory on ATI Radeon Mobility 7500
https://bugs.launchpad.net/bugs/507148
You received this bug notification because you are
Timo,
Indeed there seems to be a lucid regression -- an upgraded and a fresh-
installed Lucid virtual machine doesn't have vmmouse-accelerated mouse
on my VMWare Fusion host. This worked fine in Jaunty and Karmic.
--
should depend on -vmmouse?
https://bugs.launchpad.net/bugs/430532
You received
I've got a similar bug in Karmic on my Samsung N130.
At a random point of time xorg crashes without an obvious reason.
This is the end of my Xorg.0.log.old:
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x8133d6b]
1: /usr/bin/X(xf86SigHandler+0x55) [0x80c7d35]
2: [0x35b400]
3:
** Tags added: regression-potential
--
[K8M800] Xorg freeze / Kernel 2.6.32-10-generic freeze
https://bugs.launchpad.net/bugs/508699
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-openchrome in ubuntu.
** Changed in: linux (Ubuntu)
Status: New = Triaged
** Changed in: linux (Ubuntu)
Importance: Undecided = Medium
--
[K8M800] Xorg freeze / Kernel 2.6.32-10-generic freeze
https://bugs.launchpad.net/bugs/508699
You received this bug notification because you are a member of Ubuntu-X,
I am encountering input problems with the Nvidia ---185 driver on my
laptop. The symptoms are not exactly like those described by others on
this thread.
The mouse moves the graphics cursor, but pressing a mouse button has no
effect.
Most keyboard input still works. For example to shutdown an
** Changed in: linux (Ubuntu)
Status: New = Fix Released
** Changed in: linux (Ubuntu)
Importance: Undecided = Medium
--
[i945gm] [lucid] LCD flashes and jumps horizontally quite a lot
https://bugs.launchpad.net/bugs/506444
You received this bug notification because you are a member
** Changed in: linux (Ubuntu)
Status: New = Triaged
** Changed in: linux (Ubuntu)
Importance: Undecided = Medium
--
[gm45] *ERROR* Execbuf while wedged when closing laptop lid with compiz
running
https://bugs.launchpad.net/bugs/505271
You received this bug notification because you
** Changed in: mesa (Ubuntu)
Importance: Undecided = Medium
** Changed in: linux (Ubuntu)
Importance: Undecided = Medium
--
[lucid] Kernel error messages.. re radeon graphic card
https://bugs.launchpad.net/bugs/491572
You received this bug notification because you are a member of
Hi Peter,
From comment #76 is sounds like this issue you originally reported is
now resolved. As a result I'm going to go ahead and close the linux
task. For the messages you're seeing with your wifi card, could you
open a new bug report for that. Thanks.
** Changed in: linux (Ubuntu)
** Changed in: linux (Ubuntu)
Importance: Undecided = Medium
--
[i965gme] Freezes when attempting to switch to projector (or just detect them)
https://bugs.launchpad.net/bugs/500999
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to
Actually, not - read the previous comment.
On Thu, Feb 4, 2010 at 4:57 PM, Leann Ogasawara
leann.ogasaw...@canonical.com wrote:
Hi Peter,
From comment #76 is sounds like this issue you originally reported is
now resolved. As a result I'm going to go ahead and close the linux
task. For the
It does not work for me either. Is there any solution? Thanks!
lspci -vvvn:
00:00.0 0600: 8086:2e10 (rev 03)
Subsystem: 103c:3048
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr-
Does it work for window mode as well?
At least for me in Window mode, for both Inkscape and GIMP with libgtk
2.18.3-1ubuntu2.2 the offset issue is still there.
--
Pressure sensitive tablet: stylus paints off-cursor in Gimp and Inkscape
https://bugs.launchpad.net/bugs/410267
You received this
It doesn't work in Window mode, it's a known issue.
On Thu, Feb 4, 2010 at 9:05 PM, kaeru ka...@inigo-tech.com wrote:
Does it work for window mode as well?
At least for me in Window mode, for both Inkscape and GIMP with libgtk
2.18.3-1ubuntu2.2 the offset issue is still there.
--
Pressure
Public bug reported:
Binary package hint: xorg
The screen resolution sporadicly drops to 800x600x60 rather than
1024x768x75 when the GDM is started. After logging in there are no other
resolution options available. My wife's fix has been to login and log
back out. My fix has been to restart the
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/38779662/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/38779663/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/38779664/Dependencies.txt
**
You have been subscribed to a public bug:
Binary package hint: compiz
1 - Ubuntu 9.10
2 - Installed Version of xserver-org-video-intel is 2:2.9.0-1ubuntu2.1
3 - When I turn on computer I expect compiz and computer to start
normally
4 - After logging in the computer will work for a few
** Package changed: compiz (Ubuntu) = xserver-xorg-video-intel (Ubuntu)
--
Compiz and Intel 82945G/GZ Card Causes Freeze
https://bugs.launchpad.net/bugs/517371
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-intel in ubuntu.
Public bug reported:
Binary package hint: xserver-xorg-video-ati
Lucid fails to start xorg after latest updates. Sometimes, I get a text
login screen, sometimes I just get a screen with an underscore in the
corner and gibberish when I type anything (and have to shutdown with
magic SysRq codes).
1 - 100 of 110 matches
Mail list logo
