Thanks Greg for clarifying.
Going for the extended proc-arm7tdmi.S as before.
Greg Ungerer wrote:
Hi Per,
Per Hallsmark wrote:
Dear nommu gurus!
I'm back down the work-pile and trying porting linux 2.6 on a ARM
nommu processor.
The boot seems going farly well, but as soon as userland start,
well, it's a good thought :)
Probably the tx done is coming to soon so I'm actually destroying the
char buffer that is still about to go out.
A small delay here (although I hate it) solves the issue... probably I need
to reread the doc's a couple of times more. :)
David McCullough wrote:
Jivin
Am Donnerstag, den 10.05.2007, 16:17 +1000 schrieb Greg Ungerer:
> Hi Per,
>
> Per Hallsmark wrote:
> > Dear nommu gurus!
> >
> > I'm back down the work-pile and trying porting linux 2.6 on a ARM nommu
> > processor.
> > The boot seems going farly well, but as soon as userland start, it goes
>
Hi,
I successfully build and execute a uClinux based on kernel 2.6.21 and you will
find following the how-to.
This howto will explain how to do this.
1. Download and Install the snapgear tool chain (gcc 3.4.4):
In the Embedded Artists wmware image, download the following tool
chain:
*
http://ft
Hi Greg,
I believe it uses the uClinux-dist. The reason i am not sure is the source
was provided by a company called ADI for their Pronghorn-Metro box. It uses
uClinux libc. The version of kernel is: 2.6.17
Regards,
srikanth chavali
On 5/10/07, Greg Ungerer <[EMAIL PROTECTED]> wrote:
Hi Srika
Phil & Greg,
Attached is the verbose output of the make command.
Please rename .piz to .zip.
Greg Ungerer wrote:
Hi Praveen,
Praveen Chandrasekharaiah wrote:
:) I am compiling with the correct CPU architecture. A snap shot of
my logs are below:
If you send your build command lines I will be
Hi Greg,
Just figured out that ADI Engineering is using uClinux-dist.
srikanth chavali
On 5/10/07, Greg Ungerer <[EMAIL PROTECTED]> wrote:
Hi Srikanthn
Srikanth Chavali wrote:
>I compiled (2.6.x kernel) and loaded the zImage and ramdisk.gz on my
> board with IXP425. The board se