I'm running my HP Thin Clinet with FreeNAS installed on a 32Mb SD card
USB.
Initialy I had 256Mb ram - with the system running OK, but after
upgrading to 512Mb (max for my the Thin Client) coverarts loads much
faster - I expect because the RAM disk is bigger. I have a 250Gb HDD
connected to the sy
odruud;288209 Wrote:
> Thanks. My music is stored in the folder home/usr/Music on the
> harddrive. In Squeezecenter settings in tab Basic Settings under Music
> Folder it says /home/usr/music.
Under Unix (and Linux) /home/usr/Music and /home/usr/music are not the
same directory--it is case-sens
mherger;288954 Wrote:
> > I want to set the off screen saver for squeezebox to blank at night
> > time and turn it back on to date time during the day
>
> Oh, and then there's imho a plugin which does the above. Check the
> plugins list in the wiki.
>
> --
>
> Michael
Thanks I will have a lo
Has anyone had success setting up SqueezeCenter (as opposed to
slimserver) up on openSuse 10.3 yet? If so, what startup scripts do you
need, if any?
TIA,
Jim
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/lists/listinfo/
One thing that occurs to me for those with limited memory is to go into
the BIOS and reduce any memory reserved for the display to a minimum.
The name will vary with the BIOS - the on I'm looking at calls it
"onchip vga frame buffer size".
Warning: Don't set it to "none". You lose the display!
S
I haven't tried with only 256MB but 512MB works fine for me using CF.
My memory usage currently shows as:
Mem: 122M Active, 221M Inact, 74M Wired, 16M Cache, 54M Buf, 1000K
Free
with perl taking about 85MB and mysql about 32MB. I have seen perl go
to nearly 100MB. It looks like I would be able
ik632;289182 Wrote:
> My Celeron 600 has 256mb ram and boots off a hard disk currently (board
> doesn't support boot off of usb and I don't have a spare cf and adapter
> to test with). I have about 70% ram used when system is up and running
> and SC is running. CPU peaks when I browse to the libr
I like it better on *nix when running headless and without a GUI.
There's no reason to have it if you are administering it from a web
interface anyway :)
--
ik632
ik632's Profile: http://forums.slimdevices.com/member.php?u
My Celeron 600 has 256mb ram and boots off a hard disk currently (board
doesn't support boot off of usb and I don't have a spare cf and adapter
to test with). I have about 70% ram used when system is up and running
and SC is running. CPU peaks when I browse to the library from the
controller, but
mherger;28 Wrote:
> > I would be surprised if not.
> One more thing: enable swapping in FreeNAS. This should help with
> memory issues (it's imho off by default).
I did consider that but I am running FreeNAS, SlimNAS etc from the 2nd
partition on the CF (ad0s2). Probably not a good idea to
Not sure why you would need to re-install at all, but try this first:
> sudo /etc/init.d/squeezecenter restart
If that doesn't work then:
> sudo apt-get --purge remove squeezecenter
This will remove your config files as well. Then re-install with:
> sudo apt-get update
> sudo apt-get install
As your playing with linux did you start the firewall/ or is it on ?
I'm also a Linux noob so i find it easy to mess with firewall with
something called firestarter which you can get trough synaptic.
As I understand it port 9000 and 3483 should be open maybe 9090 as well
? ( a search can show up
Down rev'ed to slimserver 6.5.3 seems to have resolved the problem.
Anyone know what changed in 6.5.4 that would have caused the problem of
not being able to "clear and rescan". Thanks
--
lennym
lennym's Profile: http://fo
I been running Squeezecenter for a wile on Ubuntu 7.10 server. I run it
24/7 so I wanted to get a motherboard that did not take a lot of power.
I got a Mini-ITX one with no fans. It don't have the same chip set.
After I got the Ethernet to work I uninstalled Squeezecenter with:
apt-get autoremove
cjbrooker;288945 Wrote:
>
> Could someone read through it to check it makes sense and is correct?
Looks good to me; nice work.
--
davis
davis's Profile: http://forums.slimdevices.com/member.php?userid=8771
View this th
> I want to set the off screen saver for squeezebox to blank at night
> time and turn it back on to date time during the day
Oh, and then there's imho a plugin which does the above. Check the plugins list
in the wiki.
--
Michael
___
unix mailing list
> I was wondering if any one has any scripts on how to manage a player vi
> squeezecenter with a perl script (or telnet or expect).
There's a complete documentation about the CLI in SC:
http://yourserver:9000/html/docs/cli-api.html
Just connect "telnet yourserver 9090" and start typing your comma
Hi
I was wondering if any one has any scripts on how to manage a player vi
squeezecenter with a perl script (or telnet or expect).
I want to set the off screen saver for squeezebox to blank at night
time and turn it back on to date time during the day
Alex
--
KeyzerSuze
-
Thanks for the tip!
I've added a section to the wiki about permissions to help others
(under 'Note: Linux / UNIX file and directory permissions'):
http://wiki.slimdevices.com/index.cgi?BeginnersGuideToOrganising
Could someone read through it to check it makes sense and is correct?
--
cjbrook
19 matches
Mail list logo
