JackOfAll - do you have any more patches I could include while I'm
working on Perl 5.16 support?
Michael
http://www.herger.net/slim-plugins - AlbumReview, Biography,
MusicInfoSCR, Smart Mix
mherger's Profile: http://forum
If I use Cubox for internet radio streaming, I got a different error log
and squeezelite ended with a segmentation fault:
[12:37:53.002485] sendSTAT:151 STAT: STMt
[12:37:54.003658] sendSTAT:151 STAT: STMt
[12:37:55.004898] sendSTAT:151 STAT: STMt
[12:37:56.006196] sendSTAT:151 STAT: STMt
[12:37
Running 1.2beta2. Squeezelite's parameters are: -r 44100 -o
hw:CARD=Legato
Found that it doesn't allow me to stream internet radio. It works with
plughw:CARD however.
Here is the error log:
[12:27:46.755040] stream_init:264 init stream
[12:27:46.756366] stream_init:265 streambuf size: 209715
Please count me in. I'm happy to pay even if I don't get to be part of
the first beta.
gbyleveldt's Profile: http://forums.slimdevices.com/member.php?userid=36759
View this thread: http://forums.slimdevices.com/showthread.p
Pleas count me in if you still have room. I have been enjoying my WB
Dual very much.
--mike
mikes's Profile: http://forums.slimdevices.com/member.php?userid=2427
View this thread: http://forums.slimdevices.com/showthread
I would be happy to participate in the beta for $200. I just got my WB
Dual connected to my main system with a cheap DAC for a proof of
concept. I'm now ready to put the Touch up for sale and move forward
with Community Squeeze project. I'm thrilled that the Squeeze
environment is being evolved af
ezekieldas wrote:
> Everything looks fine. I've attached the output. I've a sneaking
> suspicion this has something to do with another player 'mpd' being used.
> I had to make some modifications to mpd recently
> to try and make it compaitble with flac 1.2. It's unfortunate that
> everytime I ma
erland wrote:
> Count me in if there is room for one more.
I am a little late to the partybut I would also be in for one if
they were not all accounted for.
--Dustin
dustinsterk's Profile: http://forums.slimdevices.c
Triode wrote:
> How are you starting it, if you add "-d all=debug" to the command line
> you will see a lot of debug messages - what do you see when it is not
> working?
Everything looks fine. I've attached the output. I've a sneaking
suspicion this has something to do with another player 'mpd'
I've added binaries for the current git version to the download page:
http://code.google.com/p/squeezelite/downloads/list for the following
platforms:
- linux i386, x86-64, arm6hf, windows
Please could a few people trial and assuming all is ok I will look to
release the current version as squeeze
ezekieldas wrote:
> I've been using squeezelite since it was initially released and now it
> has mysteriously stopped working. I've restarted the application as well
> as the system numerous times but playability or not seems to be totally
> random. I'm not seeing anything in the logs. Any way I
I've been using squeezelite since it was initially released and now it
has mysteriously stopped working. I've restarted the application as well
as the system numerous times but playability or not seems to be totally
random. I'm not seeing anything in the logs. Any way I could bump
debugging?
---
JackOfAll wrote:
>
> The $200 figure I have used above, is just a number I have plucked out
> of thin air, so it is not a fixed and final figure. But on the basis
> that it is the number, my question would be, how many of you, (if any),
> would be prepared to pay $200 for a CSP1 "beta" board, wh
I'll gladly accept a beta board, if one can be spared for a mildly
active beta tester :)
Honestly the only things I can truly help with are:
- localization to French
- testing synching w/ SB3s
- testing resilience to insanely complicated (but not ancient) network
or server setups
In terms of SQ t
But just so as to be counted: I would be willing to pay in the region of
$200 to participate.
--
"Dreamer, easy in the chair that really fits you..."
dsdreamer's Profile: http://forums.slimdevices.com/m
FYI
http://bugs.slimdevices.com/show_bug.cgi?id=17985
gharris999's Profile: http://forums.slimdevices.com/member.php?userid=115
View this thread: http://forums.slimdevices.com/showthread.php?t=97862
__
LOL. No more PM's or emails, please. I'll clarify here
1. We do not have an issue with funding. We do not need a financial
backer. We do not need to set up a "project" on one of the pledge
funding sites. If we need to fund the production of 400 CSP2 boards,
without taking a penny in advance f
JackOfAll wrote:
> John has dispatched one of his SWAMP 0.5 "test" DAC carrier boards to
> me. I am hopeful that a couple of weeks after receiving it, we will have
> an ALSA driver and be looking to move forward with a limited production
> run of CSP1 boards. CSP1 is effectively going to be the p
Please, count me in for the beta testing if there's still room for one
more :D.
Even though that I'm using the wand with another setup (Wandboard -
Amanero - Ian's FIFO - Buffallo IIISE) and I don't really need another
DAC board, you guys are doing such a great job with both hardware and
software
forgot to reset server ip address, everything working fine.
Paul W Panish's Profile: http://forums.slimdevices.com/member.php?userid=5295
View this thread: http://forums.slimdevices.com/showthread.php?t=99096
_
So, all worked fine with ethernet connections, however when I try to use
wireless the connection to the server fails. To be more specific, the
player works fine with a wireless connection, however the server only is
reachable if it's connected by ethernet to the router. I've tried this
with the li
Count me.
Was reading this forum during past months, but registered only now, to
tell you that I'm ready to be tester.
psergy's Profile: http://forums.slimdevices.com/member.php?userid=60612
View this thread: http://forums
Great guys! Appreciate the support.
The SWAMP 0.5 prototype board, (sent by John), just arrived for me to be
able to start working on the audio driver.
[image: http://www.communitysqueeze.org/files/SWAMP_TOP__640x480.jpg]
[image:
http://www.communitysqueeze.org/files/SWAMP_BOTTOM__640x480.jpg]
So count me in. I'm not concerned with the cost. I've been following
this thread since the beginning and would be very excited to participate
in CSP1. I have a Wandboard Dual and a Quad...so I can test on both
boards if that helps.
John Marshall
SqueezeCenter 7.3.4 running on a DIY PC, Windows
JackOfAll wrote:
> At least 10 of the CSP1 boards will be spoken for, (myself, Adrian,
> John, and to get them into the hands of what will be our US and UK
> distributors), leaving perhaps 10 or 15 boards to be allocated to
> "public" beta testers. I suspect that we will need to pass on some of
>
JackOfAll wrote:
>
>
> At least 10 of the CSP1 boards will be spoken for, (myself, Adrian,
> John, and to get them into the hands of what will be our US and UK
> distributors), leaving perhaps 10 or 15 boards to be allocated to
> "public" beta testers. I suspect that we will need to pass on som
JackOfAll wrote:
> The $200 figure I have used above, is just a number I have plucked out
> of thin air, so it is not a fixed and final figure. But on the basis
> that it is the number, my question would be, how many of you, (if any),
> would be prepared to pay $200 for a CSP1 "beta" board, which
JackOfAll wrote:
> There is one issue with the QUAD image, mostly cosmetic, and can be
> resolved by switching back to the performance governor, but I'm loathe
> to release an image where I know there is a problem, no matter how
> small. If I get some time later today and can figure out where the
JackOfAll wrote:
> OK, let's keep this simple. Understand your concern. For you guys in
> Europe, specifically in the EU, your boards will be shipped from the UK,
> there will not be any additional VAT or duty to pay at your end. You
> don't need to worry that you are going to get hit with any un
Stoker wrote:
> I would be happy to pay $200 for a CSP1. I'm assuming that it will come
> without a Wandboard.
Yes, Ian, it will definitely come without a CPU module. (Can't absorb
the cost of that! ;)) My expectation is that anyone replying in this
thread, already have a Dual or Quad CPU card a
bakker_be wrote:
> You can count me in.
> Just an additional question though: I believe John is in the US. Have
> you factored in import taxes & VAT? I know that (at least for Belgium,
> where I live) this can add up to a third to the price, and it's also
> calculated on top of the shipping cost,
JackOfAll wrote:
>
> The $200 figure I have used above, is just a number I have plucked out
> of thin air, so it is not a fixed and final figure. But on the basis
> that it is the number, my question would be, how many of you, (if any),
> would be prepared to pay $200 for a CSP1 "beta" board, wh
You can count me in.
Just an additional question though: I believe John is in the US. Have
you factored in import taxes & VAT? I know that (at least for Belgium,
where I live) this can add up to a third to the price, and it's also
calculated on top of the shipping cost, so $200 for the board + $10
John has dispatched one of his SWAMP 0.5 "test" DAC carrier boards to
me. I am hopeful that a couple of weeks after receiving it, we will have
an ALSA driver and be looking to move forward with a limited production
run of CSP1 boards. CSP1 is effectively going to be the public beta
board and was a
michaelvv wrote:
>
> I know it's very close before Clive will release the R6 , just
> curious
>
There is one issue with the QUAD image, mostly cosmetic, and can be
resolved by switching back to the performance governor, but I'm loathe
to release an image where I know there is a problem, no
35 matches
Mail list logo
