I recently lost my local radio stations, as well as internet radio. Has
this happened to anyone else out there? Anyone have any advice for me?
Thanks in advance,
Mark
mjock3's Profile: http://forums.slimdevices.com/member.
Triode wrote:
> Yes please use the script in that post. This included some wandboard
> specifics which are not installed if you use post 1
Yes! All good, working fine in Wifi now.
Squeezelite seems to require a restart after a reboot - is that to be
expected?
Fantastic job Triode, looks and w
ChrisMmm wrote:
> Sorry, was a bit confused as to what you meant as I used the
> instructions in post #1 for my build. I assume you are referring to the
> script in post #27?
Yes please use the script in that post. This included some wandboard
specifics which are not installed if you use post 1
Triode wrote:
> rebuild from source with -g and then create a core dump which you let
> look at with gdb? Sorry don't have time to look at this at the moment
> but will do so, especially if you could post more information about the
> segfault.
Thanks for responding.
I'm currently struggling wit
Triode wrote:
> Please use the create script to produce a new image as this also adds
> some files for wifi support.
Sorry, was a bit confused as to what you meant as I used the
instructions in post #1 for my build. I assume you are referring to the
script in post #27?
ChrisMmm wrote:
> I deleted the soa-aur directory, recloned and ran the soa-install.
> Should I have gone back to scratch and re installed Arch?
>
> Oh, my WB is rev A.
Please use the create script to produce a new image as this also adds
some files for wifi support.
-
Triode wrote:
> Did you install via the script to recreate the card. This should
> install the right things to activate wlan0. However I am not sure about
> a rev C wandboard as this has a different wifi chip.
I deleted the soa-aur directory, recloned and ran the soa-install.
Should I have gon
ChrisMmm wrote:
> Thanks Triode.
>
> Rebuilt, rebooted and tried the Wireless Interface panel. Input the SSID
> and Pwd but does not connect. "ip link" command still not showing wlan0,
> just has eth0. This may not be part of the Squeeze install as such?
Did you install via the script to recre
Thanks Triode.
Rebuilt, rebooted and tried the Wireless Interface panel. Input the SSID
and Pwd but does not connect. "ip link" command still not showing wlan0,
just has eth0. This may not be part of the Squeeze install as such?
-
After not looking this for a long time I've repeated the initial
instructions and compiled this on Ubuntu 64bit and Ubuntu armhf
(wandboard) and both work lovely. Thanks Triode!
Louis
'Last.fm' (http://www.last.fm/user/lrossouw)
--
hi guys,
is there a way to make a default volume when I start picoreplayer ?
The volume of my USB device is very low when I start the RPi, I need to
go each time to the alsamixer and put the volume of the USB Device at a
max level, to have a great sound...
( I am using QSB Sound Science speake
rmac321 wrote:
> JackofAll:
> Don't know what the legal/financial/tax implications might be, but
> should you decide to start some type of legal defense fund, post a link
> here so we can "express our gratitude" to you for all your time and
> effort.
Best Regards,
Gandhi
not often enough well
I've updated the web interface to hopefully configure wired and wireless
network interfaces. This is not well tested, but I thought I'd post so
others can test as well. There are possibly some dependencies on the
wireless scanning for having the wireless interface already configured.
Please use
mherger wrote:
> > Is it failing all jpegs or just the upscaled ones?
>
> Only upscaled ones. I changed LMS 7.9 to not upscale. Now the client
> would have to do it - and that's when I came to understand the issue
> (I've seen it in the past with images from online services, but never
> inves
PasTim wrote:
> I have been getting a few segfaults when using squeezelite to output via
> stdout.
>
> >
Code:
> >
> segfault at 18 ip 7fb60b154f1d sp 7fff69ec2690 error 4 in
libc-2.19.so[7fb60b0d5000+1bc000]
>
> >
>
> I can't get a
TheLastMan wrote:
> Just want to install and go on a basic Raspberry Pi. Have ordered all
> the bits. I will be using the standard headphone out into an
> amplifier's "aux" input.
> This is just providing my kids' iPod docking system with a Squeezebox
> function - so no hi-fi required, no USB D
Just want to install and go on a basic Raspberry Pi. Have ordered all
the bits. I will be using the standard headphone out into an
amplifier's "aux" input.
This is just providing my kids' iPod docking system with a Squeezebox
function - so no hi-fi required, no USB DAC and no high-res files. Jus
I have problems with my cheap USB network adapter TP-Link TL-WN725N V2
in the 1.15-versions of piCorePlayer, including the latest version
1.15e. I asked in the piCore forum but was redirected here. The support
for this WiFi dongle has broken more than once when the kernel has been
upgradet. I have
mintaudio wrote:
> Reading through things further, it appears that I may not really
> understand the nature of events here.
>
> Either way.. it's a damn shame when things turn out this way.
Not many of us do we simply don't have the information :confused: and
probably we will not get to know ei
I have been getting a few segfaults when using squeezelite to output via
stdout.
Code:
segfault at 18 ip 7fb60b154f1d sp 7fff69ec2690 error 4 in
libc-2.19.so[7fb60b0d5000+1bc000]
I can't get a squeezelite debug log because when I am
Is it failing all jpegs or just the upscaled ones?
Only upscaled ones. I changed LMS 7.9 to not upscale. Now the client
would have to do it - and that's when I came to understand the issue
(I've seen it in the past with images from online services, but never
investigated it, as I mostly liste
Hi please check:
Yeah, did that:
pi@raspi2 ~/jivelite $ find /usr/lib/ -iname libjpeg*
/usr/lib/jvm/jdk-7-oracle-armhf/jre/lib/arm/libjpeg.so
/usr/lib/arm-linux-gnueabihf/libjpeg.so
/usr/lib/arm-linux-gnueabihf/libjpeg.a
/usr/lib/arm-linux-gnueabihf/libjpeg.so.8
/usr/lib/arm-linux-gnueabihf/lib
Regards autostarting Squeezelite - does it restart if it was active
prior to reboot or poweroff? Not sure as I have been bouncing the
Wandboard trying to get wifi going.
ChrisMmm's Profile: http://forums.slimdevices.com/mem
lrossouw wrote:
> You won't be able to do it as you won't be able to ensure that the
> players start at the same point. Different players may also have
> different buffers etc.
You are probably right but I will give it a go sometime anyway just to
see what happens. I assume the squeezelites, an
PasTim wrote:
>
> - there's a couple of seconds a lag in controlling the music using my
> normal laptop browser
>
Buffer in the client? Your DAC or whatever upnp client is playing is
probably buffering the stream before playing. This results in lag when
changing tracks.
PasTim wrote:
>
> -
Reading through things further, it appears that I may not really
understand the nature of events here.
Either way.. it's a damn shame when things turn out this way.
mintaudio's Profile: http://forums.slimdevices.com/member
After all the work you guys put into this :(
I really wish we'd have been able to do something together now. I never
thought CSOS would end up like this.. Unfortunately, your
hardware/software platform wasn't quite the perfect fit for us (although
I have very much regretted trying to go it al
Is there any news on support for the Wolfson audio card?
marlo's Profile: http://forums.slimdevices.com/member.php?userid=37542
View this thread: http://forums.slimdevices.com/showthread.php?t=97803
___
Installed as per post #1 in the thread and all running fine on my
Wandboard Dual. Haven't actually attached to my stereo but its available
through LMS and seems to be working fine.
Install isn't too bad tho obviously not as simple as the CSOS type .img
file. Having loaded Archlinux on my BBB in t
Owen Smith wrote:
> I'm concerned that Arch has been chosen for this project. A distribution
> that willingly describes itself as Bleeding Edge is not a good recipe
> for a stable music player. I get enough bleeding edge at work, at home I
> just want something that gives no trouble and playes mu
30 matches
Mail list logo
