Triode wrote:
> I would expect the levels to be the same - is the LMS volume set the
> same. Does the output device have a hardware volume?
I have to measure with multimeter the output level at 1KHz 0dB at 100%
volume to be sure.
My impression is, that the picoreplayer with volume set at 100% i
praganj wrote:
> Ok, so now R Pi B, B+ and Wandboard Quad are working well with last
> soa.
>
> After the device has finished phase 2 and tried to boot, there was not
> network connection and i was not able to see the device on router/dhcp.
> I turned of player and router, than turned on the rou
Ok, so now R Pi B, B+ and Wandboard Quad are working well with last
soa.
After the device has finished phase 2 and tried to boot, there was not
network connection and i was not able to see the device on router/dhcp.
I turned of player and router, than turned on the router, waited a
little, than t
soundcheck wrote:
> You need to check if the phase1 phase2 MAC is really the same!!
>
> On some systems/installations the OS/kernel/driver/bootparam/userspace
> generated MACs even override the HW MAC.
> Sometimes these MACs are fixed (manually configured), sometimes these
> MACs are random (
Okay poing...
Then copy config.tgz to /home/tc, and do a filetool.sh -b, then take the
sd card to youre pc, and copy the file to youre pc that way.
Regards;
Jesper.
Jesperlykke's Profile: http://forums.slimdevices.com/mem
Jesperlykke wrote:
>
> Hope it helps ???
>
Jesper,
Thank you so much for all your help. Still trying to find my way around
tinycore...
I did install mc following your instructions. But mc doesn't run. See
below
Code:
tc@hifiberry:~$ tce-load -i mc
libgpg-error.t
soundcheck wrote:
> That's been a misunderstanding.
>
> The squeeze environment is 2-channel only. And that will probably never
> change.
Right...I thought you were hinting that you had another system for
streaming multichannel and I was curious what that might be.
---
Poing... :)
No need to feel stupid... Scp has some issuses in picore, due to some
symlinks(or missing ones)
Cant remember howto fix that.
I you install mc (midnight commander)
Like :
#tce
#s for search
And then install mc ondemand... After done, load mc with tce-load -i mc
Now in mc, you can
Jesperlykke wrote:
> Email it to me, the file config.tgz - lykkelinux at gmail.com
I am trying to download config.gz to my PC but it doesn't work.
On my picoreplayer (it has hostname "hifiberry"), I copied config.gz to
my home folder.
Then, from my PC, I use "scp tc@hifiberry:~/config.gz
." I a
praganj wrote:
> Hmm. This is strange. Yes, i have rebooted it manually. I will do some
> more tests today evening. DHCP client changes, but with the same mac
> address the client should get the same ip.
> In phase 1 and phase 2 dvice is getting the right fixed ip, but not on
> final reboot. Mayb
Triode wrote:
> The install changes the dhcp client between phase 1 and phase 2 and
> between phase 2 and the final reboot. This is why it says you should
> check the IP address each time as I have seen it change with some
> servers. Have you tried manually rebooting the wandboard after the
> f
atrocity wrote:
> At the risk of threadjacking, would you mind elaborating? I'm curious
> if you have a setup that can gaplessly play multichannel FLAC, which is
> something I've been looking for.
>
> Thank you.
Hi.
That's been a misunderstanding.
The squeeze environment is 2-channel only. A
12 matches
Mail list logo
