kolossos4730 wrote:
> Jeff,
>
> I disabled the script and added -G 22 to the squeezelite Various Input
> options. This, as you point out, sets the GPIO pin to low when
> squeezelite is turned on and high when off. The pi-AMP needs a logic
> high to unmute it.
>
> Regards,
>
> Arie
Ok, Thanks
Jeff07971 wrote:
> Hi Arie,
>
> Just to be clear, we have been talking about 2 different solutions
> here.
>
> 1. The script Relay.sh.
>
> 2. Ralphys latest version of Squeezelite with the -G option compiled
> in.
>
> You can only changed to active low with the script.
>
> The -G option sets
Rikhav wrote:
> Hi greg
>
> Finally did fine tune the equalizer and its sounding very good.
> Specially the glare with in some dacs can be tamed well
>
> But there is no way we can have values in db instead of 1 to 100?
>
> If values were in db it would much easy to setup the equalizer
>
> ..
Hi greg
Finally did fine tune the equalizer and its sounding very good.
Specially the glare with in some dacs can be tamed well
But there is no way we can have values in db instead of 1 to 100?
If values were in db it would much easy to setup the equalizer
Is there any way to correspond the nu
kolossos4730 wrote:
> Paul,
>
> I have tested the latest squeezelite on my iQAudio Pi-DAC+/Pi-AMP+/RPiB+
> combo and it works, but the logic is inversed. If I turn on squeezelite
> the amp is muted and if I turn off squeezelite the amp is unmuted! It
> doesn't matter if I set /sys/class/gpio/gpi
flysurfer wrote:
>
> EDIT: Creating a update event ("updateVolume") that calls "send_packet"
> in slimproto.c at the same place where "sendSTAT" is called could
> work... is there any documentation about the opcodes and how to define a
> set-volume call?
Stefan,
Yes, this is the way to do it,
flysurfer wrote:
> Anyone can test this by connecting to the Alsa Mixer with "-V" option in
> squeezelite and then using alsamixer to change the volume. The volume
> for the squeezelite instance won't change (as seen in squeezebox server
> web interface or Apps) and this will overwrite the volume
flysurfer wrote:
> Hi Ronnie,
>
> yes - I talked about this with Gordon and he sent me one (rotary
> encoder) for testing ;)
>
> Now I like to get it working... the problem should be the same for all
> who like to change the volume of the Alsa Mixer device by some kind of
> hardware, as squeez
paul- wrote:
> It is the amp, that uses gpio to mute That's what I was looking for.
Paul,
I have tested the latest squeezelite on my iQAudio Pi-DAC+/Pi-AMP+/RPiB+
combo and it works, but the logic is inversed. If I turn on squeezelite
the amp is muted and if I turn off squeezelite the amp i
Hi Ronnie,
yes - I talked about this with Gordon and he sent me one for testing ;)
Now I like to get it working...
2 x Max2Play on ODROID U2/U3 with LMS, Squeezelite, Shairport, XBMC
1 x Squeezebox Receiver
1 x Denon 1713 AVR + Nubert 5.1 System
iPeng
Max2Play Webinterface and SD-Image: htt
flysurfer wrote:
> Hi,
>
>
>
> Why do I ask? There is a (hardware) rotary encoder for IQAudIO cards
> (DAC) that connects to the Alsa Mixer device and changes the volume. To
> help this volume change to survive longer than the currently playing
> song, I need a way to tell squeezelite about th
raymondhthomas wrote:
> Is anyone using jivelite over wifi successfully?
>
> > > >
- Raspberry Pi 2 B+
- Official 7" touch display
- latest version of max2play
- GMYLE RTL8192CU wifi dongle
> > >
I use jivelite exclusively over wifi with piCorePlayer, 7" screen, RPI
2B, R8712U d
Hi marcoc1712,
yes, this is the default setting as otherwise the volume would always
pop to 100% and I want squeezelite to use the Alsa Mixer to control the
volume on hardware level - and if possible vice versa (set squeezelite
volume from Alsa Mixer with rotary encoder).
I just saw the possibil
huxmut wrote:
> I have an IQaudio DAC but not the Amp HAT if that's of any help ??
> Not sure what's being asked, so you'll have to give me some instruction
> on what you're wanting :)
>
> Let me know
It is the amp, that uses gpio to mute That's what I was looking for.
---
flysurfer wrote:
> Hi,
>
> I just wanted to ask if it is possible to change the player volume of
> squeezelite by changing the volume of the connected Alsa Mixer device
> (in a way that the player instance knows about the volume change).
>
> I know it is possible to connect squeezelite to the
Hi,
I just wanted to ask if it is possible to change the player volume of
squeezelite by changing the volume of the connected Alsa Mixer device
(in a way that the player instance knows about the volume change).
I know it is possible to connect squeezelite to the mixer device by
adding the -V [D
paul- wrote:
> Thanks for the feedback. Ability to change active High or Low logic has
> not been built in. I debated about adding it before introducing it to
> the community. I'm really curious as to how it works with IQaudIO If
> someone who has the amp board could test.
>
> I'm traveling
sbp wrote:
> Sorry, I can't remember exactly how this was/is working.
> I thought that I always had to stop the music streaming through
> squeezelite, and then 15 sec later the shairport stream would start.
>
> Anyway, I just tested it on 2.03beta1 (should be similar to 2.02 in this
> respect)
18 matches
Mail list logo
