uri2103 wrote:
> Hello,
>
> i'm facing an issue with adjusting the screen brightness in jivelite
> using the picoreplayer version 3.20. I am using the official raspberry
> pi display. When i try to access the function, jivelite is reporting "No
> official raspberry pi display found". But it was
htctyo wrote:
> already change to 1 still fail
> why 3.11 is ok
Because 3.11 uses a 4.4.39 based kernel, and 3.20 uses a 4.9.21 based
kernel. The drivers have quite a few changes.
Please confirm that you are using the kernel version 4.9.21-pcpCore_v7.
This is shown in the footer of the web
ifconfig wlan0 down
ifconfig wlan0 up
No wifi devices found!
eth0 Link encap:Ethernet HWaddr B8:27:EB:62:DF:ED
inet addr:192.168.0.106 Bcast:192.168.0.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1923 errors:0 dropped:11 overruns:0 frame:0
TX pack
already change to 1 still fail
why 3.11 is ok
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
___
htctyo wrote:
> I use auto in channel but still fail . what section I need to set I in
> my rounter I work fine in 3.11 thanks
Please fix your router to use channel 1 and retry. Just to eliminate;
sometimes the high channels do clash with the WIFI drivers.
Also verify you did not disable the
Works just fine on my 2 rpi3 systems, and my zero-w systems. Must be an
issue with your router setup, more than likely channel configuration.
I use auto in channel but still fail . what section I need to set I in
my rounter I work fine in 3.11 thanks
-
I've done in-situ upgrades of a Pi2+IQaudio PiDAC+, a Pi3 and
Pi3+touchscreen+IQaudio PiDACZero, all without apparent issues.
eiffel's Profile: http://forums.slimdevices.com/member.php?userid=46208
View this thread: http://
mherger wrote:
> > i'm facing an issue with adjusting the screen brightness in jivelite
> > using the picoreplayer version 3.20. I am using the official
> raspberry
> > pi display.
>
> I think there's an issue with hard-coded paths in the pCP applet. The
> paths have changed, the applet wasn't
uri2103 wrote:
> Hello,
>
> i'm facing an issue with adjusting the screen brightness in jivelite
> using the picoreplayer version 3.20. I am using the official raspberry
> pi display. When i try to access the function, jivelite is reporting "No
> official raspberry pi display found". But it was
merlinus wrote:
> I have the same experience. 3.11 audio works perfectly, but 3.20 audio
> cannot find my wifi network using the scan option.
>
> Back to 3.11 for me!
Wifi has never been recommended with the Audio version, I should just
disable wifi in that version.
-
i'm facing an issue with adjusting the screen brightness in jivelite
using the picoreplayer version 3.20. I am using the official raspberry
pi display.
I think there's an issue with hard-coded paths in the pCP applet. The
paths have changed, the applet wasn't updated.
--
Michael
Works perfectly for me. I updated Insitu from 3.11 using the
instructions above. I've been quite happily listening to music and radio
since.
Sent from my Nexus 6P using Tapatalk
badsoden's Profile: http://forums.slimdevi
htctyo wrote:
> wifi in rpi3
> I use 3.2 final in rpi3 but internal wifi is fail cannot scan any
> network
> but 3.11 is ok
I have the same experience. 3.11 audio works perfectly, but 3.20 audio
cannot find my wifi network using the scan option.
Back to 3.11 for me!
---
Hello,
i'm facing an issue with adjusting the screen brightness in jivelite
using the picoreplayer version 3.20. I am using the official raspberry
pi display. When i try to access the function, jivelite is reporting "No
official raspberry pi display found". But it was already working with a
previ
htctyo wrote:
> wifi in rpi3
> I use 3.2 final in rpi3 but internal wifi is fail cannot scan any
> network
> but 3.11 is ok
Works just fine on my 2 rpi3 systems, and my zero-w systems. Must be
an issue with your router setup, more than likely channel configuration.
wifi in rpi3
I use 3.2 final in rpi3 but internal wifi is fail cannot scan any
network
but 3.11 is ok
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread: http://forums.slimdevices.com
I use 3.2 final in rpi3 but internal wifi is fail cannot scan any
network
but 3.11 is ok
htctyo's Profile: http://forums.slimdevices.com/member.php?userid=66802
View this thread: http://forums.slimdevices.com/showthread.
sbp wrote:
> I'm not sure I understand your issue. I can use Jivelite on my RPi to
> turn any player on/off (both original Squeezebox players as well other
> RPi's running Squeezelite). Off course if you turn your players off by
> pulling the plug or power them down - then you can't wake them rem
18 matches
Mail list logo
