Whether you need a fan or not will probably depend on what sort of case
you have. If it provides good airflow, or incorporates some sort or
heatsink, then running pCP/LMS isn't, in my experience, going to
overheat the CPU.
I have my PI4 inside an amplifier enclosure, where the ambient
I finally got my Pi4 and using it for a PLEX server.
I'm running pCP on a Pi3, and may move it to another Pi4 next.
I know that the 4 runs hot, and expect that a fan will be needed with
pCP/Pi4 (please correct me if I'm wrong), but I would like to use a fan
control that will turn on the fan only
paul- wrote:
> For channel 13 to work, you have to correctly set the country code in
> Wpa_supplicant.. and of course use a country code that permits 13
I set the country code to GB, which to the best of my knowledge allows
13. When I have a spare moment I'll set the working access point
For channel 13 to work, you have to correctly set the country code in
Wpa_supplicant.. and of course use a country code that permits 13
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
ralphy wrote:
> The Skin selected below is the one you want for the rpi 7 inch screen.
Yes, that is correct! Thank you very much!
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this
Getting there. I've discovered the modprobe commands to install the
framebuffer:
Code:
modprobe flexfb setaddrwin=0 width=240 height=240
We've updated the squeezelite extension to the current 1.9.6-1198
version for piCorePlayer 4.x.
Fixes the issue of spotty ogg stream format skipping tracks
prematurely.
Includes decoding for opus and ogg/flac formats.
Direct https streaming.
To update squeezelite;
Use the piCorePlayer webgui
carsten_h wrote:
> I have the 7" Raspberry touchdisplay. I didn't find "PiGrid" on the
> list. Or is it some of the other "Grid" entries without a "Pi" in the
> name?
> I didn't look for the 800x480 resolution entry. I will look for it this
> evening. It was mentioned in this thread. If there
after several weeks of using, i can say lms on pi4 (picoreplayer 6.0.0)
works perfectly.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
paul- wrote:
> Normally boot issues are power supply related. pCP kernel boots in
> performance mode, so if your power supply is weak, that could do it,
> Otherwise, there is something wrong with that SD card,
I forgot to thank you for your help (used a different SD card and it
booted right
paul- wrote:
> The uid= and gid=xxx option should be set to your userid for ubuntu.
>
> When I gave you that information, I thought you were mounting the other
> direction.
Thank you, I'm very grateful for all your help with this. It's all
working properly now.
Cheers
--Ian
--ian
chill wrote:
> Watching with interest! I have one of these Pirate Audio boards with
> the line out option, attached to a Pi Zero W running pCP6.0.0-b7. I
> have the audio working using the 'HiFiBerry DAC Zero/MiniAMP' option,
> and the four buttons are working with sbpd (I had to use the '-t
Hi,
I'm running PcP on a PiZero as a client.
There are 2 servers available running the LMS.
I set up the wpa_supplicant.conf for multiple networks and assigned
different priorities for the Zero to connect to.
This works, but if the primary WiFi is lost, the Zero will not connect
to the other
mherger wrote:
> What display do you have?
I have the 7" Raspberry touchdisplay. I didn't find "PiGrid" on the
list. Or is it some of the other "Grid" entries without a "Pi" in the
name?
I didn't look for the 800x480 resolution entry. I will look for it this
evening.
mherger wrote:
> Is
14 matches
Mail list logo
