paul- wrote:
> Correct.
Ok. That is easy.
The LMS is running now without any problem and the Pi 4 runs at 45°C,
which is Ok I think. Even if I build the database new the temperature
stays at this value.
The last two times the file systems are clean after switching off via
powerbutton.
Regardin
chill wrote:
> Just to be sure, can you clarify what you see on the screen on
> rebooting? Does it look like 'shutdown' messages, or 'startup'
> messages?
If I reboot via the Main page of the PCP web interface, I see the usual
shutdown messages, finishing with "Requesting system reboot". This
Is this any help
https://forums.slimdevices.com/showthread.php?109988-RPI-3-piCorePlayer-LMS-can-not-connect-with-WDMyCloud&p=930548&viewfull=1#post930548
Remember to expand the red word more for field tips.
Also check that you are in beta mode and have you you done the hotlinks
thing from the
Grumpy Bob wrote:
> If I reboot via the Main page of the PCP web interface, I see the usual
> shutdown messages, finishing with "Requesting system reboot". This
> screen remains once the Pi has booted, squeezelite is running and music
> can be heard.
How odd. The boot up messages should appear
I see the boot messages if I don't have /home/tc/sbpd-script.sh entered
as a User Command in Tweaks. Then the piCorePlayer splash screen and
Jivelite comes up
As far as I can see, cmdline.txt and bootlocal.sh are fine.
Anyway, I'll have to leave this till later today...
Robert
*Home: *Raspb
Man in a van wrote:
> Is this any help
>
> https://forums.slimdevices.com/showthread.php?109988-RPI-3-piCorePlayer-LMS-can-not-connect-with-WDMyCloud&p=930548&viewfull=1#post930548
>
> Remember to expand the red word more for field tips.
>
> Also check that you are in beta mode and have you y
Grumpy Bob wrote:
> I see the boot messages if I don't have /home/tc/sbpd-script.sh entered
> as a User Command in Tweaks. Then the piCorePlayer splash screen and
> Jivelite comes up
>
Well I'm thoroughly confused in that case. The sbpd script file only
runs after pCP has finished all it's ot
Think it's working - the key was to specify ver=1.0 in the options
Thanks as ever!
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & Nes
Good show
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=110642
___
unix mailing
Maybe spoke too soon LMS is stuck at opening gui now ... and pcp
refuses to restart
[sigh]
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Ho
YES!
Finally!
I think most of these problems are down to me ... I'm just losing it!
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini & N
Join the club :p
In the pCP web gui, if you go to
> Main page > Diagnostics > Logs
you can check the boot log
I think "Wait for Network" is default in pCP
Man in a van's Profile: http://forums.slimdevices.com/member
Man in a van wrote:
> Join the club :p
>
>
>
> In the pCP web gui, if you go to
>
>
>
> you can check the boot log
>
> I think "Wait for Network" is default in pCP (you can change it it the
> Wi-Fi settings)
Is that the dmseg section?
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Sp
This is mine on the beta of version 6.0.0.
Paul explained on a recent thread (which I can't find) that the default
numder is 50 (which is 25 secs).
You can see that this took 6 sec to do the network thing
29176
ronnie
+---+
|Fi
Seems it's not available in 5.0
Can't tackle an upgrade after the last 24 hrs. !
Cheers
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
Chromecast Audio, Home Mini
It's nearly time for a siesta, relax:p
29177
Then come back to it. Make sure you are in beta mode
29178
+---+
|Filename: diagnostic v5.0.png |
|Download: http://forums.slimdevices.c
Man in a van wrote:
> It's nearly time for a siesta, relax:p
>
>
> 29177
>
> Then come back to it. Make sure you are in beta mode
>
> 29178
That's my neighbour!
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zip
He must be a local, as I can't see a whippet !
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=110642
ryangodammit wrote:
> Hi,
>
> How do you set the jivelite presets?
Press and hold the function keys F1 - F10 to set what's currently
playing to presets 1-10.
Press the number keys 1 through 0 to play the corresponding preset.
You can also define/edit presets through LMS 7.9.2 or higher.
What is the value of the player *Defeat destructive Touch-To-Play*
setting in LMS?
As a test, if you change the skin in jivelite to match the one that
works in squeezeplay, do you see the same behaviour as the grid skin?
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox cli
amoeller wrote:
>
>
> The crackling sound (?) that was mentioned earlier has for me always
> something to do with the Squeezelite settings, especially the ALSA
> settings.
>
>
Hi
Despite my best efforts so far, I'm still getting poor sound quality.
Would you mind sharing your ALSA settings
It is set to ask every time, I tried them all, the setting doesn't honor
if you are using Jivelite, in Sqeezeplay all is good.
I tried every skin in Jivelite and I even copied the whole Joggler skin
folder from Squeezeplay to Jivelite and it works fine until you select a
song and the same happen
chill wrote:
>
>
> The last line in the above snippet is an echo of the final line of
> sbpd-script.sh.
>
> So I don't see how it's possible for the running of
> /home/tc/sbpd-script.sh, as the final step of the startup sequence, to
> suppress the on screen messages. I'm hoping one of the pC
Yatsushiro wrote:
> Hi
>
> Despite my best efforts so far, I'm still getting poor sound quality.
> Would you mind sharing your ALSA settings?
>
> Also, Chill, I'm experiencing the same problems as M_H and Grumpy Bob on
> startup with sbpd-script.sh set to run on startup...
My ALSA settings ar
carsten_h wrote:
> Regarding the switching off via the powerbutton. Is it possible to see
> online without a display attached to see if "pcb rb" or "pcp sd" is
> executed? Maybe via tail -f .log?
Today I got a Micro HDMI to HDMI cable and could test the output of
piCorePlayer. So I can say
chill wrote:
> Have you (and/or Grumpy Bob) got these modprobe commands after
> pcp_startup.sh by any chance?
Yes!
I'mm move them and see if that's the culprit.
Yatsushiro's Profile: http://forums.slimdevices.com/memb
Yatsushiro wrote:
>
> Edit 2: Scratch the above, I'm an idiot in that I forgot to backup after
> making the changes. It does now indeed survive a reboot. Thanks for your
> help.
>
That sounds promising. So just to check - with sbpd-script.sh set as a
user command you're now getting boot up m
chill wrote:
> That sounds promising. So just to check - with sbpd-script.sh set as a
> user command you're now getting boot up messages, then the splash
> screen, then Jivelite itself, and the buttons all work properly?
>
> Fingers crossed this fixes things for M-H and Grumpy Bob.
Yes, inde
Yatsushiro wrote:
> Yes, indeed. But I have to use sudo.
>
To run sbpd-script.sh? That shouldn't be necessary if it's started as a
user command (bottom of the 'Tweaks' page).
chill's Profile: http://forums.slimdevices.
If I am not mistaken, reboot could be done by double tapping the power
button.
It worked for me, at least.
Aldoszx's Profile: http://forums.slimdevices.com/member.php?userid=69750
View this thread: http://forums.slimdevice
I ordered a board...but has to cross the pond. I'll be able to help out
in a bit.
I have not noticed anyone saying this, but do you have
gpio=25=op,dh
In your config.txt? According to the website, this is needed to enable
the DAC.
piCorePlayer a small player for the Raspberry Pi in RAM.
paul- wrote:
> I ordered a board...but has to cross the pond. I'll be able to help out
> in a bit.
Not a moment too soon! Good news.
paul- wrote:
>
>
> I have not noticed anyone saying this, but do you have
>
> gpio=25=op,dh
>
> In your config.txt? According to the website, this is nee
I don't have that line on either of my boards at the moment, and 'pigs r
25' returns 1 on both of them. I assume that means they're already
'high', somehow.
chill's Profile: http://forums.slimdevices.com/member.php?userid
Aldoszx wrote:
> If I am not mistaken
Yes, that works! Thank you!
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread: http://forums.slimdevices.com/showthread.php?t=111546
__
paul- wrote:
> I ordered a board...but has to cross the pond. I'll be able to help out
> in a bit.
>
>
> I have not noticed anyone saying this, but do you have
>
> gpio=25=op,dh
>
> In your config.txt? According to the website, this is needed to enable
> the DAC.
Thanks for this, Paul.
T
Yatsushiro wrote:
> Thanks for this, Paul.
>
> This has fixed my sound issues, and explains why the Pimoroni Mopidy
> install had no issues.
>
> Now to package this up with some speakers and a battery...
Excellent - added to the setup instructions 'here'
(https://forums.slimdevices.com/showth
Chill - many thanks, your new bootlocal.sh has done the trick!
A colleague at work has a 3D printer, so hopefully one of those cases
will be with me shortly.
Robert
*Home: *Raspberry Pi 3/piCoreplayer/LMS7.9.2 with files on QNAP
TS-251A
Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752
paul- wrote:
> That is dmesg, I need the boot log. On the Logs screen select "boot"
> from the dropdown.
Is this what you need?
[ INFO ] pcp_boot.log
Code:
Starting piCorePlayer setup...
Loading pCP function files and pCP configuration file...Done.
Checking fo
Grumpy Bob wrote:
> Chill - many thanks, your new bootlocal.sh has done the trick!
> A colleague at work has a 3D printer, so hopefully one of those cases
> will be with me shortly.
>
> Robert
Excellent - thanks for the update. Just M-H to hear from now!
chill wrote:
> Excellent - thanks for the update. Just M-H to hear from now!
Sorry, had to fix a powerboard with smoke-signals , without power no
LMS to connect to :-(
Just verified the version of my 3W board, no indication what soever.
Manually checked connections for button x and y they c
Not sure how this happens, as the extension that contains the boot
script, also contains the default configuration. So getting a file not
found error seems a bit impossible.
Have you done anything else to this installation? Do you have a fresh SD
card that you can just burn, and then setup the
Chill,
The modprobes at the right moment do help a lot.
Not far in the boot process the output switches to the SPI display.
And the flashscreen is quite fast after that - Jivelite seems working
OKE
Paul-
The suggestion of *gpio=25=op,dh* in te config.txt does help.
Without it the right channel
paul- wrote:
> Not sure how this happens, as the extension that contains the boot
> script, also contains the default configuration. So getting a file not
> found error seems a bit impossible.
>
> Have you done anything else to this installation? Do you have a fresh SD
> card that you can just
rincage wrote:
> No, just a plain set up using Ethcher to write image to a 128MB (MB not
> GB) SDCard. Done nothing else to SDCard.
>
>
>
>
I think a bigger card is maybe an idea :)
Man in a van's Profile: http://for
I have heard of weird things happening on very small cards. Could be a
compatibility issue with the RPi itself.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JH
M-H wrote:
> Chill,
> We can build this into PCP-Gui, and have this config.txt part set , when
> choosing Pirate Audio boards.
>
I think we can build a custom dtoverlay to handle a lot of this. But I
need to read up on overlays.
piCorePlayer a small player for the Raspberry Pi in RAM.
Hom
Chill,
Can you perhaps update the OP with all of the latest instructions.
Also, can you give references to where you got the flexfb and
fbtft_device driver init strings from?
Paul
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'dona
paul- wrote:
> Chill,
>
> Can you update your instructions with references to where you got the
> flexfb and fbtft_device driver init strings from?
>
> Paul
I've added some links to 'this post'
(https://forums.slimdevices.com/showthread.php?111502-Jivelite-on-a-Pirate-Audio-240x240-screen&p=9
coyrls wrote:
> You can specify multiple library locations in LMS, so there shouldn't be
> any need for LVM.
Yes I'm aware of the wonderfully easy way one can add extra storage to
pCP. I simply wanted to not have to keep manually balancing what goes
where on several HDDs. Many thank Claus for y
49 matches
Mail list logo